On Tue, Jun 23, 2015 at 03:04:32PM +0200, Frans Klaver wrote:
> On Tue, Jun 23, 2015 at 2:52 PM, Luis de Bethencourt
> <luis@xxxxxxxxxxxxxxxxx> wrote:
> > Remove explicit true/false comparations to bool variables.
> >
> > Signed-off-by: Luis de Bethencourt <luis@xxxxxxxxxxxxxxxxx>
> > ---
> > drivers/staging/rtl8192u/r8192U_core.c | 7 ++++---
> > drivers/staging/rtl8192u/r8192U_dm.c | 21 +++++++++++----------
> > 2 files changed, 15 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
> > index a4795af..c53d670 100644
> > --- a/drivers/staging/rtl8192u/r8192U_core.c
> > +++ b/drivers/staging/rtl8192u/r8192U_core.c
> > @@ -2047,7 +2047,7 @@ static bool GetHalfNmodeSupportByAPs819xUsb(struct net_device *dev)
> > struct r8192_priv *priv = ieee80211_priv(dev);
> > struct ieee80211_device *ieee = priv->ieee80211;
> >
> > - if (ieee->bHalfWirelessN24GMode == true)
> > + if (ieee->bHalfWirelessN24GMode)
> > Reval = true;
> > else
> > Reval = false;
> > @@ -2762,7 +2762,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
> > //
> > #ifdef TO_DO_LIST
> > if (Adapter->ResetProgress == RESET_TYPE_NORESET) {
> > - if (pMgntInfo->RegRfOff == true) { /* User disable RF via registry. */
> > + if (pMgntInfo->RegRfOff) { /* User disable RF via registry. */
> > RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
> > MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
> > // Those actions will be discard in MgntActSet_RF_State because of the same state
> > @@ -4406,7 +4406,8 @@ static void query_rxdesc_status(struct sk_buff *skb,
> > /* RTL8190 set this bit to indicate that Hw does not decrypt packet */
> > stats->Decrypted = !desc->SWDec;
> >
> > - if ((priv->ieee80211->pHTInfo->bCurrentHTSupport == true) && (priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP))
> > + if ((priv->ieee80211->pHTInfo->bCurrentHTSupport) &&
> > + (priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP))
> > stats->bHwError = false;
> > else
> > stats->bHwError = stats->bCRC|stats->bICV;
> > diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
> > index 12dd19e..9946615 100644
> > --- a/drivers/staging/rtl8192u/r8192U_dm.c
> > +++ b/drivers/staging/rtl8192u/r8192U_dm.c
> > @@ -438,7 +438,7 @@ static void dm_bandwidth_autoswitch(struct net_device *dev)
> >
> > if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 || !priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable)
> > return;
> > - if (priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz == false) { /* If send packets in 40 Mhz in 20/40 */
> > + if (!priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz) { /* If send packets in 40 Mhz in 20/40 */
> > if (priv->undecorated_smoothed_pwdb <= priv->ieee80211->bandwidth_auto_switch.threshold_40Mhzto20Mhz)
> > priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = true;
> > } else { /* in force send packets in 20 Mhz in 20/40 */
> > @@ -563,7 +563,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
> > break;
> > }
> > }
> > - if (viviflag == true) {
> > + if (viviflag) {
> > write_nic_byte(dev, 0x1ba, 0);
> > viviflag = false;
> > RT_TRACE(COMP_POWER_TRACKING, "we filtered the data\n");
> > @@ -766,7 +766,7 @@ void dm_txpower_trackingcallback(struct work_struct *work)
> > struct r8192_priv *priv = container_of(dwork, struct r8192_priv, txpower_tracking_wq);
> > struct net_device *dev = priv->ieee80211->dev;
> >
> > - if (priv->bDcut == true)
> > + if (priv->bDcut)
> > dm_TXPowerTrackingCallback_TSSI(dev);
> > else
> > dm_TXPowerTrackingCallback_ThermalMeter(dev);
> > @@ -1301,7 +1301,7 @@ void dm_initialize_txpower_tracking(struct net_device *dev)
> > {
> > struct r8192_priv *priv = ieee80211_priv(dev);
> >
> > - if (priv->bDcut == true)
> > + if (priv->bDcut)
> > dm_InitializeTXPowerTracking_TSSI(dev);
> > else
> > dm_InitializeTXPowerTracking_ThermalMeter(dev);
> > @@ -1357,7 +1357,7 @@ static void dm_check_txpower_tracking(struct net_device *dev)
> > #ifdef RTL8190P
> > dm_CheckTXPowerTracking_TSSI(dev);
> > #else
> > - if (priv->bDcut == true)
> > + if (priv->bDcut)
> > dm_CheckTXPowerTracking_TSSI(dev);
> > else
> > dm_CheckTXPowerTracking_ThermalMeter(dev);
> > @@ -1467,7 +1467,7 @@ void dm_cck_txpower_adjust(struct net_device *dev, bool binch14)
> > { /* dm_CCKTxPowerAdjust */
> > struct r8192_priv *priv = ieee80211_priv(dev);
> >
> > - if (priv->bDcut == true)
> > + if (priv->bDcut)
> > dm_CCKTxPowerAdjust_TSSI(dev, binch14);
> > else
> > dm_CCKTxPowerAdjust_ThermalMeter(dev, binch14);
> > @@ -1731,7 +1731,7 @@ static void dm_dig_init(struct net_device *dev)
> > *---------------------------------------------------------------------------*/
> > static void dm_ctrl_initgain_byrssi(struct net_device *dev)
> > {
> > - if (dm_digtable.dig_enable_flag == false)
> > + if (!dm_digtable.dig_enable_flag)
> > return;
> >
> > if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
> > @@ -1750,7 +1750,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
> > u8 i;
> > static u8 fw_dig;
> >
> > - if (dm_digtable.dig_enable_flag == false)
> > + if (!dm_digtable.dig_enable_flag)
> > return;
> >
> > /*DbgPrint("Dig by Sw Rssi\n");*/
> > @@ -1792,7 +1792,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
> > static u32 reset_cnt;
> > u8 i;
> >
> > - if (dm_digtable.dig_enable_flag == false)
> > + if (!dm_digtable.dig_enable_flag)
> > return;
> >
> > if (dm_digtable.dig_algorithm_switch) {
> > @@ -3062,7 +3062,8 @@ static void dm_dynamic_txpower(struct net_device *dev)
> > priv->bDynamicTxLowPower = false;
> > } else {
> > /* high power state check */
> > - if (priv->undecorated_smoothed_pwdb < txlowpower_threshold && priv->bDynamicTxHighPower == true)
> > + if (priv->undecorated_smoothed_pwdb <
> > + txlowpower_threshold && priv->bDynamicTxHighPower)
> > priv->bDynamicTxHighPower = false;
>
> Oh, this has a misleading air hanging over it. It focuses the eyes on
> "txlowpower_threshold && priv->bDynamicTxHighPower", while that
> probably isn't the intent.
>
> Frans
I agree, and wasn't sure what the best way to deal with was.
The following doesn't mislead but goes above 80 characters.
if (priv->undecorated_smoothed_pwdb < txlowpower_threshold &&
priv->bDynamicTxHighPower == true)
It is better than the original but it doesn't completely fix it.
If this is a better compromise I can update the patch.
Thanks,
Luis
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
