Fix checkpatch.pl warnings about lines longer than 80 characters.
Signed-off-by: Michał Kępień <kernel@xxxxxxxxxx>
---
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c | 58 ++++++++++++-------------
1 file changed, 29 insertions(+), 29 deletions(-)
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
index 6108f1e..7905a61 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
@@ -399,8 +399,8 @@ int dsp_reload(struct ft1000_usb *ft1000dev)
card_reset_dsp(ft1000dev, 0);
msleep(1000);
- status =
- ft1000_write_register(ft1000dev, HOST_INTF_BE, FT1000_REG_SUP_CTRL);
+ status = ft1000_write_register(ft1000dev, HOST_INTF_BE,
+ FT1000_REG_SUP_CTRL);
/* Let's check for FEFE */
status =
@@ -587,8 +587,8 @@ static int ft1000_start_xmit(struct sk_buff *skb, struct net_device *dev)
goto err;
}
- pipe =
- usb_sndbulkpipe(pFt1000Dev->dev, pFt1000Dev->bulk_out_endpointAddr);
+ pipe = usb_sndbulkpipe(pFt1000Dev->dev,
+ pFt1000Dev->bulk_out_endpointAddr);
maxlen = usb_maxpacket(pFt1000Dev->dev, pipe, usb_pipeout(pipe));
pdata = (u8 *)skb->data;
@@ -1047,8 +1047,8 @@ static int ft1000_dsp_prov(void *arg)
/* Check if doorbell is available */
pr_debug("check if doorbell is cleared\n");
- status =
- ft1000_read_register(dev, &tempword, FT1000_REG_DOORBELL);
+ status = ft1000_read_register(dev, &tempword,
+ FT1000_REG_DOORBELL);
if (status) {
pr_debug("ft1000_read_register error\n");
break;
@@ -1069,9 +1069,8 @@ static int ft1000_dsp_prov(void *arg)
pr_debug("*** Provision Data Sent to DSP\n");
/* Send provisioning data */
- ptr =
- list_entry(info->prov_list.next, struct prov_record,
- list);
+ ptr = list_entry(info->prov_list.next,
+ struct prov_record, list);
len = *(u16 *)ptr->pprov_data;
len = htons(len);
len += PSEUDOSZ;
@@ -1259,7 +1258,7 @@ static int ft1000_proc_drvmsg(struct ft1000_usb *dev, u16 size)
if (tempword & FT1000_DB_DPRAM_TX) {
mdelay(10);
status = ft1000_read_register(dev, &tempword,
- FT1000_REG_DOORBELL);
+ FT1000_REG_DOORBELL);
if (tempword & FT1000_DB_DPRAM_TX)
break;
}
@@ -1293,8 +1292,8 @@ static int ft1000_proc_drvmsg(struct ft1000_usb *dev, u16 size)
info->DSPInfoBlk[10] = 0x7200;
info->DSPInfoBlk[11] = htons(info->DSPInfoBlklen);
status = ft1000_write_dpram32(dev, 0,
- (u8 *)&info->DSPInfoBlk[0],
- (unsigned short)(info->DSPInfoBlklen + 22));
+ (u8 *)&info->DSPInfoBlk[0],
+ (unsigned short)(info->DSPInfoBlklen + 22));
status = ft1000_write_register(dev, FT1000_DB_DPRAM_TX,
FT1000_REG_DOORBELL);
dev->DrvMsgPend = 0;
@@ -1353,8 +1352,9 @@ static int ft1000_proc_drvmsg(struct ft1000_usb *dev, u16 size)
*pmsg++ = convert.wrd;
*pmsg++ = htons(info->DrvErrNum);
- status = card_send_command(dev, (unsigned char *)&tempbuffer[0],
- (u16)(0x0012 + PSEUDOSZ));
+ status = card_send_command(dev,
+ (unsigned char *)&tempbuffer[0],
+ (u16)(0x0012 + PSEUDOSZ));
if (status)
goto out;
info->DrvErrNum = 0;
@@ -1524,7 +1524,7 @@ int ft1000_poll(void *dev_id)
usleep_range(9000, 11000);
/* Program WMARK register */
status = ft1000_write_register(dev, 0x600,
- FT1000_REG_MAG_WATERMARK);
+ FT1000_REG_MAG_WATERMARK);
/* clear ASIC reset doorbell */
status = ft1000_write_register(dev,
FT1000_DSP_ASIC_RESET,
@@ -1540,9 +1540,9 @@ int ft1000_poll(void *dev_id)
FT1000_REG_SUP_CTRL);
/* copy dsp session record from Adapter block */
status = ft1000_write_dpram32(dev, 0,
- (u8 *)&info->DSPSess.Rec[0], 1024);
+ (u8 *)&info->DSPSess.Rec[0], 1024);
status = ft1000_write_register(dev, 0x600,
- FT1000_REG_MAG_WATERMARK);
+ FT1000_REG_MAG_WATERMARK);
/* ring doorbell to tell DSP that
* ASIC is out of reset
* */
@@ -1554,21 +1554,21 @@ int ft1000_poll(void *dev_id)
if (!dev->fAppMsgPend) {
/* Reset ASIC and DSP */
status = ft1000_read_dpram16(dev,
- FT1000_MAG_DSP_TIMER0,
- (u8 *)&info->DSP_TIME[0],
- FT1000_MAG_DSP_TIMER0_INDX);
+ FT1000_MAG_DSP_TIMER0,
+ (u8 *)&info->DSP_TIME[0],
+ FT1000_MAG_DSP_TIMER0_INDX);
status = ft1000_read_dpram16(dev,
- FT1000_MAG_DSP_TIMER1,
- (u8 *)&info->DSP_TIME[1],
- FT1000_MAG_DSP_TIMER1_INDX);
+ FT1000_MAG_DSP_TIMER1,
+ (u8 *)&info->DSP_TIME[1],
+ FT1000_MAG_DSP_TIMER1_INDX);
status = ft1000_read_dpram16(dev,
- FT1000_MAG_DSP_TIMER2,
- (u8 *)&info->DSP_TIME[2],
- FT1000_MAG_DSP_TIMER2_INDX);
+ FT1000_MAG_DSP_TIMER2,
+ (u8 *)&info->DSP_TIME[2],
+ FT1000_MAG_DSP_TIMER2_INDX);
status = ft1000_read_dpram16(dev,
- FT1000_MAG_DSP_TIMER3,
- (u8 *)&info->DSP_TIME[3],
- FT1000_MAG_DSP_TIMER3_INDX);
+ FT1000_MAG_DSP_TIMER3,
+ (u8 *)&info->DSP_TIME[3],
+ FT1000_MAG_DSP_TIMER3_INDX);
info->CardReady = 0;
info->DrvErrNum = DSP_CONDRESET_INFO;
pr_debug("DSP conditional reset requested\n");
--
1.7.10.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
