Le 11/05/2015 07:30, Johnny Kim a écrit : > This driver is for the wilc1000 which is a single chip IEEE 802.11 > b/g/n device. > The driver works together with cfg80211, which is the kernel side of > configuration management for wireless devices because the wilc1000 > chipset is fullmac where the MLME is managed in hardware. > > The driver worked from kernel version 2.6.38 and being now ported > to several others since then. > A TODO file is included as well in this commit. > > Signed-off-by: Johnny Kim <johnny.kim@xxxxxxxxx> > Signed-off-by: Rachel Kim <rachel.kim@xxxxxxxxx> > Signed-off-by: Dean Lee <dean.lee@xxxxxxxxx> > Signed-off-by: Chris Park <chris.park@xxxxxxxxx> > Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx> > --- > Changes in v3: > - fix the permissions. > - fix the folder tree. > - forget to add the mailing-list during the previous sending. Hi Greg, Do you have any comment on this v3 series (aka ping ;-)). Bye, > drivers/staging/Kconfig | 2 + > drivers/staging/Makefile | 1 + > drivers/staging/wilc1000/Kconfig | 55 + > drivers/staging/wilc1000/Makefile | 41 + > drivers/staging/wilc1000/TODO | 8 + > drivers/staging/wilc1000/coreconfigsimulator.h | 20 + > drivers/staging/wilc1000/coreconfigurator.c | 2201 ++++++ > drivers/staging/wilc1000/coreconfigurator.h | 498 ++ > drivers/staging/wilc1000/fifo_buffer.c | 142 + > drivers/staging/wilc1000/fifo_buffer.h | 23 + > drivers/staging/wilc1000/host_interface.c | 8074 +++++++++++++++++++++ > drivers/staging/wilc1000/host_interface.h | 1344 ++++ > drivers/staging/wilc1000/itypes.h | 60 + > drivers/staging/wilc1000/linux_mon.c | 643 ++ > drivers/staging/wilc1000/linux_wlan.c | 2953 ++++++++ > drivers/staging/wilc1000/linux_wlan_common.h | 170 + > drivers/staging/wilc1000/linux_wlan_sdio.c | 249 + > drivers/staging/wilc1000/linux_wlan_sdio.h | 14 + > drivers/staging/wilc1000/linux_wlan_spi.c | 510 ++ > drivers/staging/wilc1000/linux_wlan_spi.h | 14 + > drivers/staging/wilc1000/wilc_debugfs.c | 185 + > drivers/staging/wilc1000/wilc_errorsupport.h | 84 + > drivers/staging/wilc1000/wilc_event.h | 123 + > drivers/staging/wilc1000/wilc_exported_buf.c | 76 + > drivers/staging/wilc1000/wilc_log.h | 47 + > drivers/staging/wilc1000/wilc_memory.c | 63 + > drivers/staging/wilc1000/wilc_memory.h | 330 + > drivers/staging/wilc1000/wilc_msgqueue.c | 211 + > drivers/staging/wilc1000/wilc_msgqueue.h | 133 + > drivers/staging/wilc1000/wilc_osconfig.h | 55 + > drivers/staging/wilc1000/wilc_oswrapper.h | 133 + > drivers/staging/wilc1000/wilc_platform.h | 181 + > drivers/staging/wilc1000/wilc_sdio.c | 1298 ++++ > drivers/staging/wilc1000/wilc_semaphore.c | 70 + > drivers/staging/wilc1000/wilc_semaphore.h | 115 + > drivers/staging/wilc1000/wilc_sleep.c | 36 + > drivers/staging/wilc1000/wilc_sleep.h | 45 + > drivers/staging/wilc1000/wilc_spi.c | 1475 ++++ > drivers/staging/wilc1000/wilc_strutils.c | 431 ++ > drivers/staging/wilc1000/wilc_strutils.h | 412 ++ > drivers/staging/wilc1000/wilc_thread.c | 35 + > drivers/staging/wilc1000/wilc_thread.h | 153 + > drivers/staging/wilc1000/wilc_time.c | 163 + > drivers/staging/wilc1000/wilc_time.h | 205 + > drivers/staging/wilc1000/wilc_timer.c | 51 + > drivers/staging/wilc1000/wilc_timer.h | 153 + > drivers/staging/wilc1000/wilc_type.h | 34 + > drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 4592 ++++++++++++ > drivers/staging/wilc1000/wilc_wfi_cfgoperations.h | 134 + > drivers/staging/wilc1000/wilc_wfi_netdevice.c | 960 +++ > drivers/staging/wilc1000/wilc_wfi_netdevice.h | 277 + > drivers/staging/wilc1000/wilc_wlan.c | 2434 +++++++ > drivers/staging/wilc1000/wilc_wlan.h | 321 + > drivers/staging/wilc1000/wilc_wlan_cfg.c | 643 ++ > drivers/staging/wilc1000/wilc_wlan_cfg.h | 33 + > drivers/staging/wilc1000/wilc_wlan_if.h | 991 +++ > 56 files changed, 33704 insertions(+) > create mode 100644 drivers/staging/wilc1000/Kconfig > create mode 100644 drivers/staging/wilc1000/Makefile > create mode 100644 drivers/staging/wilc1000/TODO > create mode 100644 drivers/staging/wilc1000/coreconfigsimulator.h > create mode 100644 drivers/staging/wilc1000/coreconfigurator.c > create mode 100644 drivers/staging/wilc1000/coreconfigurator.h > create mode 100644 drivers/staging/wilc1000/fifo_buffer.c > create mode 100644 drivers/staging/wilc1000/fifo_buffer.h > create mode 100644 drivers/staging/wilc1000/host_interface.c > create mode 100644 drivers/staging/wilc1000/host_interface.h > create mode 100644 drivers/staging/wilc1000/itypes.h > create mode 100644 drivers/staging/wilc1000/linux_mon.c > create mode 100644 drivers/staging/wilc1000/linux_wlan.c > create mode 100644 drivers/staging/wilc1000/linux_wlan_common.h > create mode 100644 drivers/staging/wilc1000/linux_wlan_sdio.c > create mode 100644 drivers/staging/wilc1000/linux_wlan_sdio.h > create mode 100644 drivers/staging/wilc1000/linux_wlan_spi.c > create mode 100644 drivers/staging/wilc1000/linux_wlan_spi.h > create mode 100644 drivers/staging/wilc1000/wilc_debugfs.c > create mode 100644 drivers/staging/wilc1000/wilc_errorsupport.h > create mode 100644 drivers/staging/wilc1000/wilc_event.h > create mode 100644 drivers/staging/wilc1000/wilc_exported_buf.c > create mode 100644 drivers/staging/wilc1000/wilc_log.h > create mode 100644 drivers/staging/wilc1000/wilc_memory.c > create mode 100644 drivers/staging/wilc1000/wilc_memory.h > create mode 100644 drivers/staging/wilc1000/wilc_msgqueue.c > create mode 100644 drivers/staging/wilc1000/wilc_msgqueue.h > create mode 100644 drivers/staging/wilc1000/wilc_osconfig.h > create mode 100644 drivers/staging/wilc1000/wilc_oswrapper.h > create mode 100644 drivers/staging/wilc1000/wilc_platform.h > create mode 100644 drivers/staging/wilc1000/wilc_sdio.c > create mode 100644 drivers/staging/wilc1000/wilc_semaphore.c > create mode 100644 drivers/staging/wilc1000/wilc_semaphore.h > create mode 100644 drivers/staging/wilc1000/wilc_sleep.c > create mode 100644 drivers/staging/wilc1000/wilc_sleep.h > create mode 100644 drivers/staging/wilc1000/wilc_spi.c > create mode 100644 drivers/staging/wilc1000/wilc_strutils.c > create mode 100644 drivers/staging/wilc1000/wilc_strutils.h > create mode 100644 drivers/staging/wilc1000/wilc_thread.c > create mode 100644 drivers/staging/wilc1000/wilc_thread.h > create mode 100644 drivers/staging/wilc1000/wilc_time.c > create mode 100644 drivers/staging/wilc1000/wilc_time.h > create mode 100644 drivers/staging/wilc1000/wilc_timer.c > create mode 100644 drivers/staging/wilc1000/wilc_timer.h > create mode 100644 drivers/staging/wilc1000/wilc_type.h > create mode 100644 drivers/staging/wilc1000/wilc_wfi_cfgoperations.c > create mode 100644 drivers/staging/wilc1000/wilc_wfi_cfgoperations.h > create mode 100644 drivers/staging/wilc1000/wilc_wfi_netdevice.c > create mode 100644 drivers/staging/wilc1000/wilc_wfi_netdevice.h > create mode 100644 drivers/staging/wilc1000/wilc_wlan.c > create mode 100644 drivers/staging/wilc1000/wilc_wlan.h > create mode 100644 drivers/staging/wilc1000/wilc_wlan_cfg.c > create mode 100644 drivers/staging/wilc1000/wilc_wlan_cfg.h > create mode 100644 drivers/staging/wilc1000/wilc_wlan_if.h > > diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig > index bfacf69..da35af6 100644 > --- a/drivers/staging/Kconfig > +++ b/drivers/staging/Kconfig > @@ -112,4 +112,6 @@ source "drivers/staging/i2o/Kconfig" > > source "drivers/staging/fsl-mc/Kconfig" > > +source "drivers/staging/wilc1000/Kconfig" > + > endif # STAGING > diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile > index 2bbd1bf..edbe5ff 100644 > --- a/drivers/staging/Makefile > +++ b/drivers/staging/Makefile > @@ -48,3 +48,4 @@ obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD) += clocking-wizard/ > obj-$(CONFIG_FB_TFT) += fbtft/ > obj-$(CONFIG_I2O) += i2o/ > obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/ > +obj-$(CONFIG_WILC1000) += wilc1000/ > diff --git a/drivers/staging/wilc1000/Kconfig b/drivers/staging/wilc1000/Kconfig > new file mode 100644 > index 0000000..101f908 > --- /dev/null > +++ b/drivers/staging/wilc1000/Kconfig > @@ -0,0 +1,55 @@ > +config WILC1000 > + tristate "WILC1000 support (WiFi only)" > + ---help--- > + This module only support IEEE 802.11n WiFi. > + > +choice > + prompt "Memory Allocation" > + depends on WILC1000 > + default WILC1000_PREALLOCATE_AT_LOADING_DRIVER > + > + config WILC1000_PREALLOCATE_AT_LOADING_DRIVER > + bool "Preallocate memory at loading driver" > + ---help--- > + This choice supports static allocation of the memory > + for the receive buffer. The driver will allocate the RX buffer > + during initial time. The driver will also free the buffer > + by calling network device stop. > + > + config WILC1000_DYNAMICALLY_ALLOCATE_MEMROY > + bool "Dynamically allocate memory in real time" > + ---help--- > + This choice supports dynamic allocation of the memory > + for the receive buffer. The driver will allocate the RX buffer > + when it is required. > +endchoice > + > + > +choice > + prompt "Bus Type" > + depends on WILC1000 > + default WILC1000_SDIO > + > + config WILC1000_SDIO > + bool "SDIO support" > + depends on MMC > + ---help--- > + This module adds support for the SDIO interface of adapters using > + WILC chipset. Select this if your platform is using the SDIO bus. > + > + config WILC1000_SPI > + bool "SPI support" > + ---help--- > + This module adds support for the SPI interface of adapters using > + WILC chipset. Select this if your platform is using the SPI bus. > +endchoice > + > + > +config WILC1000_HW_OOB_INTR > + bool "Use out of band interrupt" > + depends on WILC1000 && WILC1000_SDIO > + default n > + ---help--- > + If your platform don't recognize SDIO IRQ, connect chipset external IRQ pin > + and check this option. Or, Use this to get all interrupts including SDIO interrupts. > + > diff --git a/drivers/staging/wilc1000/Makefile b/drivers/staging/wilc1000/Makefile > new file mode 100644 > index 0000000..84bd975 > --- /dev/null > +++ b/drivers/staging/wilc1000/Makefile > @@ -0,0 +1,41 @@ > +obj-$(CONFIG_WILC1000) += wilc1000.o > +obj-$(CONFIG_WILC1000_PREALLOCATE_DURING_SYSTEM_BOOT) += wilc_exported_buf.o > + > + > +ccflags-$(CONFIG_WILC1000_SDIO) += -DWILC_SDIO -DCOMPLEMENT_BOOT > +ccflags-$(CONFIG_WILC1000_HW_OOB_INTR) += -DWILC_SDIO_IRQ_GPIO > +ccflags-$(CONFIG_WILC1000_SPI) += -DWILC_SPI > + > +ccflags-y += -DSTA_FIRMWARE=\"atmel/wilc1000_fw.bin\" \ > + -DAP_FIRMWARE=\"atmel/wilc1000_ap_fw.bin\" \ > + -DP2P_CONCURRENCY_FIRMWARE=\"atmel/wilc1000_p2p_fw.bin\" > + > +ccflags-y += -I$(src)/ -DEXPORT_SYMTAB -D__CHECK_ENDIAN__ -DWILC_ASIC_A0 \ > + -DPLL_WORKAROUND -DCONNECT_DIRECT -DAGING_ALG \ > + -DWILC_PARSE_SCAN_IN_HOST -DDISABLE_PWRSAVE_AND_SCAN_DURING_IP \ > + -DWILC_PLATFORM=WILC_LINUXKERNEL -Wno-unused-function -DUSE_WIRELESS \ > + -DWILC_DEBUGFS > +#ccflags-y += -DTCP_ACK_FILTER > + > +ccflags-$(CONFIG_WILC1000_PREALLOCATE_DURING_SYSTEM_BOOT) += -DMEMORY_STATIC \ > + -DWILC_PREALLOC_AT_BOOT > + > +ccflags-$(CONFIG_WILC1000_PREALLOCATE_AT_LOADING_DRIVER) += -DMEMORY_STATIC \ > + -DWILC_PREALLOC_AT_INSMOD > + > +ccflags-$(CONFIG_WILC1000_DYNAMICALLY_ALLOCATE_MEMROY) += -DWILC_NORMAL_ALLOC > + > + > +wilc1000-objs := wilc_wfi_netdevice.o wilc_wfi_cfgoperations.o linux_wlan.o linux_mon.o \ > + wilc_memory.o wilc_msgqueue.o wilc_semaphore.o wilc_sleep.o wilc_strutils.o \ > + wilc_thread.o wilc_time.o wilc_timer.o coreconfigurator.o host_interface.o \ > + fifo_buffer.o wilc_sdio.o wilc_spi.o wilc_wlan_cfg.o wilc_debugfs.o > + > +wilc1000-$(CONFIG_WILC1000_SDIO) += linux_wlan_sdio.o > +wilc1000-$(CONFIG_WILC1000_SPI) += linux_wlan_spi.o > + > +WILC1000_SRC_VERSION = 10.0 > +PATCHLEVEL = 2 > +WILC1000_FW_VERSION = 0 > + > +ccflags-y += -D__DRIVER_VERSION__=\"$(WILC1000_SRC_VERSION).$(PATCHLEVEL)\" > diff --git a/drivers/staging/wilc1000/TODO b/drivers/staging/wilc1000/TODO > new file mode 100644 > index 0000000..5dfeb3e > --- /dev/null > +++ b/drivers/staging/wilc1000/TODO > @@ -0,0 +1,8 @@ > +TODO: > +- remove the defined feature as kernel versions > +- remove OS wrapper functions > +- remove custom debug and tracing functions > +- rework comments and function headers(also coding style) > +- remove build warnings > +- support soft-ap and p2p mode > +- support resume/suspend function > diff --git a/drivers/staging/wilc1000/coreconfigsimulator.h b/drivers/staging/wilc1000/coreconfigsimulator.h > new file mode 100644 > index 0000000..6c3f431 > --- /dev/null > +++ b/drivers/staging/wilc1000/coreconfigsimulator.h > @@ -0,0 +1,20 @@ [..] -- Nicolas Ferre _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
