Remove rest of rtllib "debug" system - it is no longer used -
proper netdev_* functions are used in most cases.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@xxxxxxxxx>
---
drivers/staging/rtl8192e/rtllib.h | 45 --------------------------
drivers/staging/rtl8192e/rtllib_module.c | 55 --------------------------------
2 files changed, 100 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
index 0ee0107..8c614e0 100644
--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -641,51 +641,6 @@ enum wireless_network_type {
#define OUI_SUBTYPE_WMM_PARAM 1
#define OUI_SUBTYPE_QOS_CAPABI 5
-/* debug macros */
-/* To use the debug system;
- *
- * If you are defining a new debug classification, simply add it to the #define
- * list here in the form of:
- *
- * #define RTLLIB_DL_xxxx VALUE
- *
- * shifting value to the left one bit from the previous entry. xxxx should be
- * the name of the classification (for example, WEP)
- *
- * You then need to either add a RTLLIB_xxxx_DEBUG() macro definition for your
- * classification, or use RTLLIB_DEBUG(RTLLIB_DL_xxxx, ...) whenever you want
- * to send output to that classification.
- *
- * To add your debug level to the list of levels seen when you perform
- *
- * % cat /proc/net/ipw/debug_level
- *
- * you simply need to add your entry to the ipw_debug_levels array.
- */
-
-#define RTLLIB_DL_INFO (1<<0)
-#define RTLLIB_DL_WX (1<<1)
-#define RTLLIB_DL_SCAN (1<<2)
-#define RTLLIB_DL_STATE (1<<3)
-#define RTLLIB_DL_MGMT (1<<4)
-#define RTLLIB_DL_FRAG (1<<5)
-#define RTLLIB_DL_EAP (1<<6)
-#define RTLLIB_DL_DROP (1<<7)
-
-#define RTLLIB_DL_TX (1<<8)
-#define RTLLIB_DL_RX (1<<9)
-
-#define RTLLIB_DL_HT (1<<10)
-#define RTLLIB_DL_BA (1<<11)
-#define RTLLIB_DL_TS (1<<12)
-#define RTLLIB_DL_QOS (1<<13)
-#define RTLLIB_DL_REORDER (1<<14)
-#define RTLLIB_DL_IOT (1<<15)
-#define RTLLIB_DL_IPS (1<<16)
-#define RTLLIB_DL_TRACE (1<<29)
-#define RTLLIB_DL_DATA (1<<30)
-#define RTLLIB_DL_ERR (1<<31)
-
#ifndef ETH_P_PAE
#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
#define ETH_P_IP 0x0800 /* Internet Protocol packet */
diff --git a/drivers/staging/rtl8192e/rtllib_module.c b/drivers/staging/rtl8192e/rtllib_module.c
index b61035b..845d9b8 100644
--- a/drivers/staging/rtl8192e/rtllib_module.c
+++ b/drivers/staging/rtl8192e/rtllib_module.c
@@ -196,68 +196,13 @@ void free_rtllib(struct net_device *dev)
}
EXPORT_SYMBOL(free_rtllib);
-u32 rtllib_debug_level;
-static int debug = RTLLIB_DL_ERR;
-static struct proc_dir_entry *rtllib_proc;
-
-static int show_debug_level(struct seq_file *m, void *v)
-{
- seq_printf(m, "0x%08X\n", rtllib_debug_level);
-
- return 0;
-}
-
-static ssize_t write_debug_level(struct file *file, const char __user *buffer,
- size_t count, loff_t *ppos)
-{
- unsigned long val;
- int err = kstrtoul_from_user(buffer, count, 0, &val);
-
- if (err)
- return err;
- rtllib_debug_level = val;
- return count;
-}
-
-static int open_debug_level(struct inode *inode, struct file *file)
-{
- return single_open(file, show_debug_level, NULL);
-}
-
-static const struct file_operations fops = {
- .open = open_debug_level,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = write_debug_level,
- .release = single_release,
-};
-
static int __init rtllib_init(void)
{
- struct proc_dir_entry *e;
-
- rtllib_debug_level = debug;
- rtllib_proc = proc_mkdir(DRV_NAME, init_net.proc_net);
- if (rtllib_proc == NULL) {
- pr_err("Unable to create " DRV_NAME " proc directory\n");
- return -EIO;
- }
- e = proc_create("debug_level", S_IRUGO | S_IWUSR, rtllib_proc, &fops);
- if (!e) {
- remove_proc_entry(DRV_NAME, init_net.proc_net);
- rtllib_proc = NULL;
- return -EIO;
- }
return 0;
}
static void __exit rtllib_exit(void)
{
- if (rtllib_proc) {
- remove_proc_entry("debug_level", rtllib_proc);
- remove_proc_entry(DRV_NAME, init_net.proc_net);
- rtllib_proc = NULL;
- }
}
module_init(rtllib_init);
--
1.8.4.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
