Renamme these CamelCase symbols.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/ni_mio_common.c | 129 ++++++++++++-------------
drivers/staging/comedi/drivers/ni_stc.h | 95 +++++++++---------
2 files changed, 110 insertions(+), 114 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index 7e038a2..93c7b13 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -322,12 +322,11 @@ static const struct mio_regmap m_series_stc_write_regmap[] = {
[G_Command_Register(1)] = { 0x10e, 2 },
[AI_Command_1_Register] = { 0x110, 2 },
[AO_Command_1_Register] = { 0x112, 2 },
+ /*
+ * DIO_Output_Register maps to:
+ * { NI_M_DIO_REG, 4 } and { NI_M_SCXI_SER_DO_REG, 1 }
+ */
[DIO_Output_Register] = { 0, 0 }, /* DOES NOT MAP CLEANLY */
- /*
- * DIO_Output_Register maps to:
- * { M_Offset_Static_Digital_Output, 4 }
- * { M_Offset_SCXI_Serial_Data_Out, 1 }
- */
[DIO_Control_Register] = { 0, 0 }, /* DOES NOT MAP CLEANLY */
[AI_Mode_1_Register] = { 0x118, 2 },
[AI_Mode_2_Register] = { 0x11a, 2 },
@@ -633,7 +632,7 @@ static inline void ni_set_cdo_dma_channel(struct comedi_device *dev,
(ni_stc_dma_channel_select_bitfield(mite_channel) <<
CDO_DMA_Select_Shift) & CDO_DMA_Select_Mask;
}
- ni_writeb(dev, devpriv->cdio_dma_select_reg, M_Offset_CDIO_DMA_Select);
+ ni_writeb(dev, devpriv->cdio_dma_select_reg, NI_M_CDIO_DMA_SEL_REG);
mmiowb();
spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags);
}
@@ -853,8 +852,8 @@ static void ni_clear_ai_fifo(struct comedi_device *dev)
} else {
ni_stc_writew(dev, 1, ADC_FIFO_Clear);
if (devpriv->is_625x) {
- ni_writeb(dev, 0, M_Offset_Static_AI_Control(0));
- ni_writeb(dev, 1, M_Offset_Static_AI_Control(0));
+ ni_writeb(dev, 0, NI_M_STATIC_AI_CTRL_REG(0));
+ ni_writeb(dev, 1, NI_M_STATIC_AI_CTRL_REG(0));
#if 0
/* the NI example code does 3 convert pulses for 625x boards,
but that appears to be wrong in practice. */
@@ -1777,9 +1776,9 @@ static void ni_m_series_load_channelgain_list(struct comedi_device *dev,
bypass_bits |= MSeries_AI_Bypass_Dither_Bit;
/* don't use 2's complement encoding */
bypass_bits |= MSeries_AI_Bypass_Polarity_Bit;
- ni_writel(dev, bypass_bits, M_Offset_AI_Config_FIFO_Bypass);
+ ni_writel(dev, bypass_bits, NI_M_AI_CFG_BYPASS_FIFO_REG);
} else {
- ni_writel(dev, 0, M_Offset_AI_Config_FIFO_Bypass);
+ ni_writel(dev, 0, NI_M_AI_CFG_BYPASS_FIFO_REG);
}
for (i = 0; i < n_chan; i++) {
unsigned config_bits = 0;
@@ -1816,7 +1815,7 @@ static void ni_m_series_load_channelgain_list(struct comedi_device *dev,
config_bits |= MSeries_AI_Config_Dither_Bit;
/* don't use 2's complement encoding */
config_bits |= MSeries_AI_Config_Polarity_Bit;
- ni_writew(dev, config_bits, M_Offset_AI_Config_FIFO_Data);
+ ni_writew(dev, config_bits, NI_M_AI_CFG_FIFO_DATA_REG);
}
ni_prime_channelgain_list(dev);
}
@@ -2050,7 +2049,7 @@ static int ni_ai_insn_read(struct comedi_device *dev,
return -ETIME;
}
if (devpriv->is_m_series) {
- dl = ni_readl(dev, M_Offset_AI_FIFO_Data);
+ dl = ni_readl(dev, NI_M_AI_FIFO_DATA_REG);
dl &= mask;
data[n] = dl;
} else {
@@ -2665,8 +2664,8 @@ static int ni_m_series_ao_config_chanlist(struct comedi_device *dev,
for (i = 0; i < s->n_chan; ++i) {
devpriv->ao_conf[i] &= ~MSeries_AO_Update_Timed_Bit;
ni_writeb(dev, devpriv->ao_conf[i],
- M_Offset_AO_Config_Bank(i));
- ni_writeb(dev, 0xf, M_Offset_AO_Waveform_Order(i));
+ NI_M_AO_CFG_BANK_REG(i));
+ ni_writeb(dev, 0xf, NI_M_AO_WAVEFORM_ORDER_REG(i));
}
}
for (i = 0; i < n_chans; i++) {
@@ -2680,23 +2679,21 @@ static int ni_m_series_ao_config_chanlist(struct comedi_device *dev,
switch (krange->max - krange->min) {
case 20000000:
conf |= MSeries_AO_DAC_Reference_10V_Internal_Bits;
- ni_writeb(dev, 0,
- M_Offset_AO_Reference_Attenuation(chan));
+ ni_writeb(dev, 0, NI_M_AO_REF_ATTENUATION_REG(chan));
break;
case 10000000:
conf |= MSeries_AO_DAC_Reference_5V_Internal_Bits;
- ni_writeb(dev, 0,
- M_Offset_AO_Reference_Attenuation(chan));
+ ni_writeb(dev, 0, NI_M_AO_REF_ATTENUATION_REG(chan));
break;
case 4000000:
conf |= MSeries_AO_DAC_Reference_10V_Internal_Bits;
ni_writeb(dev, MSeries_Attenuate_x5_Bit,
- M_Offset_AO_Reference_Attenuation(chan));
+ NI_M_AO_REF_ATTENUATION_REG(chan));
break;
case 2000000:
conf |= MSeries_AO_DAC_Reference_5V_Internal_Bits;
ni_writeb(dev, MSeries_Attenuate_x5_Bit,
- M_Offset_AO_Reference_Attenuation(chan));
+ NI_M_AO_REF_ATTENUATION_REG(chan));
break;
default:
dev_err(dev->class_dev,
@@ -2717,9 +2714,9 @@ static int ni_m_series_ao_config_chanlist(struct comedi_device *dev,
}
if (timed)
conf |= MSeries_AO_Update_Timed_Bit;
- ni_writeb(dev, conf, M_Offset_AO_Config_Bank(chan));
+ ni_writeb(dev, conf, NI_M_AO_CFG_BANK_REG(chan));
devpriv->ao_conf[chan] = conf;
- ni_writeb(dev, i, M_Offset_AO_Waveform_Order(chan));
+ ni_writeb(dev, i, NI_M_AO_WAVEFORM_ORDER_REG(chan));
}
return invert;
}
@@ -2795,7 +2792,7 @@ static int ni_ao_insn_write(struct comedi_device *dev,
reg = DACx_Direct_Data_671x(chan);
} else if (devpriv->is_m_series) {
- reg = M_Offset_DAC_Direct_Data(chan);
+ reg = NI_M_DAC_DIRECT_DATA_REG(chan);
} else {
reg = (chan) ? DAC1_Direct_Data : DAC0_Direct_Data;
}
@@ -3324,7 +3321,7 @@ static int ni_m_series_dio_insn_config(struct comedi_device *dev,
if (ret)
return ret;
- ni_writel(dev, s->io_bits, M_Offset_DIO_Direction);
+ ni_writel(dev, s->io_bits, NI_M_DIO_DIR_REG);
return insn->n;
}
@@ -3335,9 +3332,9 @@ static int ni_m_series_dio_insn_bits(struct comedi_device *dev,
unsigned int *data)
{
if (comedi_dio_update_state(s, data))
- ni_writel(dev, s->state, M_Offset_Static_Digital_Output);
+ ni_writel(dev, s->state, NI_M_DIO_REG);
- data[1] = ni_readl(dev, M_Offset_Static_Digital_Input);
+ data[1] = ni_readl(dev, NI_M_DIO_REG);
return insn->n;
}
@@ -3442,13 +3439,13 @@ static int ni_cdo_inttrig(struct comedi_device *dev,
if (retval < 0)
return retval;
#endif
-/*
-* XXX not sure what interrupt C group does
-* ni_writeb(dev, Interrupt_Group_C_Enable_Bit,
-* M_Offset_Interrupt_C_Enable); wait for dma to fill output fifo
-*/
+ /*
+ * XXX not sure what interrupt C group does
+ * wait for dma to fill output fifo
+ * ni_writeb(dev, Interrupt_Group_C_Enable_Bit, NI_M_INTC_ENA_REG);
+ */
for (i = 0; i < timeout; ++i) {
- if (ni_readl(dev, M_Offset_CDIO_Status) & CDO_FIFO_Full_Bit)
+ if (ni_readl(dev, NI_M_CDIO_STATUS_REG) & CDO_FIFO_Full_Bit)
break;
udelay(10);
}
@@ -3459,7 +3456,7 @@ static int ni_cdo_inttrig(struct comedi_device *dev,
}
ni_writel(dev, CDO_Arm_Bit | CDO_Error_Interrupt_Enable_Set_Bit |
CDO_Empty_FIFO_Interrupt_Enable_Set_Bit,
- M_Offset_CDIO_Command);
+ NI_M_CDIO_CMD_REG);
return retval;
}
@@ -3469,7 +3466,7 @@ static int ni_cdio_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
unsigned cdo_mode_bits = CDO_FIFO_Mode_Bit | CDO_Halt_On_Error_Bit;
int retval;
- ni_writel(dev, CDO_Reset_Bit, M_Offset_CDIO_Command);
+ ni_writel(dev, CDO_Reset_Bit, NI_M_CDIO_CMD_REG);
switch (cmd->scan_begin_src) {
case TRIG_EXT:
cdo_mode_bits |=
@@ -3482,11 +3479,11 @@ static int ni_cdio_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
}
if (cmd->scan_begin_arg & CR_INVERT)
cdo_mode_bits |= CDO_Polarity_Bit;
- ni_writel(dev, cdo_mode_bits, M_Offset_CDO_Mode);
+ ni_writel(dev, cdo_mode_bits, NI_M_CDO_MODE_REG);
if (s->io_bits) {
- ni_writel(dev, s->state, M_Offset_CDO_FIFO_Data);
- ni_writel(dev, CDO_SW_Update_Bit, M_Offset_CDIO_Command);
- ni_writel(dev, s->io_bits, M_Offset_CDO_Mask_Enable);
+ ni_writel(dev, s->state, NI_M_CDO_FIFO_DATA_REG);
+ ni_writel(dev, CDO_SW_Update_Bit, NI_M_CDIO_CMD_REG);
+ ni_writel(dev, s->io_bits, NI_M_CDO_MASK_ENA_REG);
} else {
dev_err(dev->class_dev,
"attempted to run digital output command with no lines configured as outputs\n");
@@ -3506,12 +3503,12 @@ static int ni_cdio_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
ni_writel(dev, CDO_Disarm_Bit | CDO_Error_Interrupt_Enable_Clear_Bit |
CDO_Empty_FIFO_Interrupt_Enable_Clear_Bit |
CDO_FIFO_Request_Interrupt_Enable_Clear_Bit,
- M_Offset_CDIO_Command);
-/*
-* XXX not sure what interrupt C group does ni_writeb(dev, 0,
-* M_Offset_Interrupt_C_Enable);
-*/
- ni_writel(dev, 0, M_Offset_CDO_Mask_Enable);
+ NI_M_CDIO_CMD_REG);
+ /*
+ * XXX not sure what interrupt C group does
+ * ni_writeb(dev, 0, NI_M_INTC_ENA_REG);
+ */
+ ni_writel(dev, 0, NI_M_CDO_MASK_ENA_REG);
ni_release_cdo_mite_channel(dev);
return 0;
}
@@ -3542,16 +3539,16 @@ static void handle_cdio_interrupt(struct comedi_device *dev)
spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
#endif
- cdio_status = ni_readl(dev, M_Offset_CDIO_Status);
+ cdio_status = ni_readl(dev, NI_M_CDIO_STATUS_REG);
if (cdio_status & (CDO_Overrun_Bit | CDO_Underflow_Bit)) {
/* XXX just guessing this is needed and does something useful */
ni_writel(dev, CDO_Error_Interrupt_Confirm_Bit,
- M_Offset_CDIO_Command);
+ NI_M_CDIO_CMD_REG);
s->async->events |= COMEDI_CB_OVERFLOW;
}
if (cdio_status & CDO_FIFO_Empty_Bit) {
ni_writel(dev, CDO_Empty_FIFO_Interrupt_Enable_Clear_Bit,
- M_Offset_CDIO_Command);
+ NI_M_CDIO_CMD_REG);
/* s->async->events |= COMEDI_CB_EOA; */
}
comedi_handle_events(dev, s);
@@ -4033,7 +4030,7 @@ static int ni_m_series_pwm_config(struct comedi_device *dev,
}
ni_writel(dev, MSeries_Cal_PWM_High_Time_Bits(up_count) |
MSeries_Cal_PWM_Low_Time_Bits(down_count),
- M_Offset_Cal_PWM);
+ NI_M_CAL_PWM_REG);
devpriv->pwm_up_count = up_count;
devpriv->pwm_down_count = down_count;
return 5;
@@ -4398,7 +4395,7 @@ static int ni_m_series_set_pfi_routing(struct comedi_device *dev,
val &= ~MSeries_PFI_Output_Select_Mask(chan);
val |= MSeries_PFI_Output_Select_Bits(chan, source);
- ni_writew(dev, val, M_Offset_PFI_Output_Select(index));
+ ni_writew(dev, val, NI_M_PFI_OUT_SEL_REG(index));
devpriv->pfi_output_select_reg[index] = val;
return 2;
@@ -4433,10 +4430,10 @@ static int ni_config_filter(struct comedi_device *dev,
if (!devpriv->is_m_series)
return -ENOTSUPP;
- bits = ni_readl(dev, M_Offset_PFI_Filter);
+ bits = ni_readl(dev, NI_M_PFI_FILTER_REG);
bits &= ~MSeries_PFI_Filter_Select_Mask(pfi_channel);
bits |= MSeries_PFI_Filter_Select_Bits(pfi_channel, filter);
- ni_writel(dev, bits, M_Offset_PFI_Filter);
+ ni_writel(dev, bits, NI_M_PFI_FILTER_REG);
return 0;
}
@@ -4489,9 +4486,9 @@ static int ni_pfi_insn_bits(struct comedi_device *dev,
return -ENOTSUPP;
if (comedi_dio_update_state(s, data))
- ni_writew(dev, s->state, M_Offset_PFI_DO);
+ ni_writew(dev, s->state, NI_M_PFI_DO_REG);
- data[1] = ni_readw(dev, M_Offset_PFI_DI);
+ data[1] = ni_readw(dev, NI_M_PFI_DI_REG);
return insn->n;
}
@@ -4750,16 +4747,16 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device *dev,
return retval;
}
- ni_writew(dev, devpriv->clock_and_fout2, M_Offset_Clock_and_Fout2);
+ ni_writew(dev, devpriv->clock_and_fout2, NI_M_CLK_FOUT2_REG);
pll_control_bits |=
MSeries_PLL_Divisor_Bits(freq_divider) |
MSeries_PLL_Multiplier_Bits(freq_multiplier);
- ni_writew(dev, pll_control_bits, M_Offset_PLL_Control);
+ ni_writew(dev, pll_control_bits, NI_M_PLL_CTRL_REG);
devpriv->clock_source = source;
/* it seems to typically take a few hundred microseconds for PLL to lock */
for (i = 0; i < timeout; ++i) {
- if (ni_readw(dev, M_Offset_PLL_Status) & MSeries_PLL_Locked_Bit)
+ if (ni_readw(dev, NI_M_PLL_STATUS_REG) & MSeries_PLL_Locked_Bit)
break;
udelay(1);
}
@@ -4787,8 +4784,8 @@ static int ni_set_master_clock(struct comedi_device *dev,
~(MSeries_Timebase1_Select_Bit |
MSeries_Timebase3_Select_Bit);
ni_writew(dev, devpriv->clock_and_fout2,
- M_Offset_Clock_and_Fout2);
- ni_writew(dev, 0, M_Offset_PLL_Control);
+ NI_M_CLK_FOUT2_REG);
+ ni_writew(dev, 0, NI_M_PLL_CTRL_REG);
}
devpriv->clock_source = source;
} else {
@@ -5333,8 +5330,8 @@ static int ni_E_init(struct comedi_device *dev,
/* reset DIO and set all channels to inputs */
ni_writel(dev, CDO_Reset_Bit | CDI_Reset_Bit,
- M_Offset_CDIO_Command);
- ni_writel(dev, s->io_bits, M_Offset_DIO_Direction);
+ NI_M_CDIO_CMD_REG);
+ ni_writel(dev, s->io_bits, NI_M_DIO_DIR_REG);
} else {
s->insn_bits = ni_dio_insn_bits;
s->insn_config = ni_dio_insn_config;
@@ -5368,7 +5365,7 @@ static int ni_E_init(struct comedi_device *dev,
/* internal PWM output used for AI nonlinearity calibration */
s->insn_config = ni_m_series_pwm_config;
- ni_writel(dev, 0x0, M_Offset_Cal_PWM);
+ ni_writel(dev, 0x0, NI_M_CAL_PWM_REG);
} else if (devpriv->is_6143) {
/* internal PWM output used for AI nonlinearity calibration */
s->insn_config = ni_6143_pwm_config;
@@ -5403,10 +5400,10 @@ static int ni_E_init(struct comedi_device *dev,
s->n_chan = 16;
s->insn_bits = ni_pfi_insn_bits;
- ni_writew(dev, s->state, M_Offset_PFI_DO);
+ ni_writew(dev, s->state, NI_M_PFI_DO_REG);
for (i = 0; i < NUM_PFI_OUTPUT_SELECT_REGS; ++i) {
ni_writew(dev, devpriv->pfi_output_select_reg[i],
- M_Offset_PFI_Output_Select(i));
+ NI_M_PFI_OUT_SEL_REG(i));
}
} else {
s->n_chan = 10;
@@ -5525,11 +5522,11 @@ static int ni_E_init(struct comedi_device *dev,
for (channel = 0; channel < board->n_aochan; ++channel) {
ni_writeb(dev, 0xf,
- M_Offset_AO_Waveform_Order(channel));
+ NI_M_AO_WAVEFORM_ORDER_REG(channel));
ni_writeb(dev, 0x0,
- M_Offset_AO_Reference_Attenuation(channel));
+ NI_M_AO_REF_ATTENUATION_REG(channel));
}
- ni_writeb(dev, 0x0, M_Offset_AO_Calibration);
+ ni_writeb(dev, 0x0, NI_M_AO_CALIB_REG);
}
return 0;
diff --git a/drivers/staging/comedi/drivers/ni_stc.h b/drivers/staging/comedi/drivers/ni_stc.h
index 3c5ba61..c86dade 100644
--- a/drivers/staging/comedi/drivers/ni_stc.h
+++ b/drivers/staging/comedi/drivers/ni_stc.h
@@ -924,54 +924,53 @@ static const struct comedi_lrange range_ni_E_ao_ext;
* M-Series specific registers not handled by the DAQ-STC and GPCT register
* remapping.
*/
-#define M_Offset_CDIO_DMA_Select 0x007
-#define M_Offset_SCXI_Status 0x007
-#define M_Offset_AI_AO_Select 0x009
-#define M_Offset_G0_G1_Select 0x00b
-#define M_Offset_Misc_Command 0x00f
-#define M_Offset_SCXI_Serial_Data_Out 0x011
-#define M_Offset_SCXI_Control 0x013
-#define M_Offset_SCXI_Output_Enable 0x015
-#define M_Offset_AI_FIFO_Data 0x01c
-#define M_Offset_Static_Digital_Output 0x024
-#define M_Offset_Static_Digital_Input 0x024
-#define M_Offset_DIO_Direction 0x028
-#define M_Offset_Cal_PWM 0x040
-#define M_Offset_Gen_PWM(x) (0x044 + ((x) * 2))
-#define M_Offset_AI_Config_FIFO_Data 0x05e
-#define M_Offset_Interrupt_C_Enable 0x088
-#define M_Offset_Interrupt_C_Status 0x088
-#define M_Offset_Analog_Trigger_Control 0x08c
-#define M_Offset_AO_Serial_Interrupt_Enable 0x0a0
-#define M_Offset_AO_Serial_Interrupt_Ack 0x0a1
-#define M_Offset_AO_Serial_Interrupt_Status 0x0a1
-#define M_Offset_AO_Calibration 0x0a3
-#define M_Offset_AO_FIFO_Data 0x0a4
-#define M_Offset_PFI_Filter 0x0b0
-#define M_Offset_RTSI_Filter 0x0b4
-#define M_Offset_SCXI_Legacy_Compatibility 0x0bc
-#define M_Offset_DAC_Direct_Data(x) (0x0c0 + ((x) * 4))
-#define M_Offset_AO_Waveform_Order(x) (0x0c2 + ((x) * 4))
-#define M_Offset_AO_Config_Bank(x) (0x0c3 + ((x) * 4))
-#define M_Offset_RTSI_Shared_MUX 0x1a2
-#define M_Offset_Clock_and_Fout2 0x1c4
-#define M_Offset_PLL_Control 0x1c6
-#define M_Offset_PLL_Status 0x1c8
-#define M_Offset_PFI_Output_Select(x) (0x1d0 + ((x) * 2))
-#define M_Offset_PFI_DI 0x1dc
-#define M_Offset_PFI_DO 0x1de
-#define M_Offset_AI_Config_FIFO_Bypass 0x218
-#define M_Offset_SCXI_DIO_Enable 0x21c
-#define M_Offset_CDI_FIFO_Data 0x220
-#define M_Offset_CDO_FIFO_Data 0x220
-#define M_Offset_CDIO_Status 0x224
-#define M_Offset_CDIO_Command 0x224
-#define M_Offset_CDI_Mode 0x228
-#define M_Offset_CDO_Mode 0x22c
-#define M_Offset_CDI_Mask_Enable 0x230
-#define M_Offset_CDO_Mask_Enable 0x234
-#define M_Offset_Static_AI_Control(x) ((x) ? (0x260 + (x)) : 0x064)
-#define M_Offset_AO_Reference_Attenuation(x) (0x264 + (x))
+#define NI_M_CDIO_DMA_SEL_REG 0x007
+#define NI_M_SCXI_STATUS_REG 0x007
+#define NI_M_AI_AO_SEL_REG 0x009
+#define NI_M_G0_G1_SEL_REG 0x00b
+#define NI_M_MISC_CMD_REG 0x00f
+#define NI_M_SCXI_SER_DO_REG 0x011
+#define NI_M_SCXI_CTRL_REG 0x013
+#define NI_M_SCXI_OUT_ENA_REG 0x015
+#define NI_M_AI_FIFO_DATA_REG 0x01c
+#define NI_M_DIO_REG 0x024
+#define NI_M_DIO_DIR_REG 0x028
+#define NI_M_CAL_PWM_REG 0x040
+#define NI_M_GEN_PWM_REG(x) (0x044 + ((x) * 2))
+#define NI_M_AI_CFG_FIFO_DATA_REG 0x05e
+#define NI_M_INTC_ENA_REG 0x088
+#define NI_M_INTC_STATUS_REG 0x088
+#define NI_M_ATRIG_CTRL_REG 0x08c
+#define NI_M_AO_SER_INT_ENA_REG 0x0a0
+#define NI_M_AO_SER_INT_ACK_REG 0x0a1
+#define NI_M_AO_SER_INT_STATUS_REG 0x0a1
+#define NI_M_AO_CALIB_REG 0x0a3
+#define NI_M_AO_FIFO_DATA_REG 0x0a4
+#define NI_M_PFI_FILTER_REG 0x0b0
+#define NI_M_RTSI_FILTER_REG 0x0b4
+#define NI_M_SCXI_LEGACY_COMPAT_REG 0x0bc
+#define NI_M_DAC_DIRECT_DATA_REG(x) (0x0c0 + ((x) * 4))
+#define NI_M_AO_WAVEFORM_ORDER_REG(x) (0x0c2 + ((x) * 4))
+#define NI_M_AO_CFG_BANK_REG(x) (0x0c3 + ((x) * 4))
+#define NI_M_RTSI_SHARED_MUX_REG 0x1a2
+#define NI_M_CLK_FOUT2_REG 0x1c4
+#define NI_M_PLL_CTRL_REG 0x1c6
+#define NI_M_PLL_STATUS_REG 0x1c8
+#define NI_M_PFI_OUT_SEL_REG(x) (0x1d0 + ((x) * 2))
+#define NI_M_PFI_DI_REG 0x1dc
+#define NI_M_PFI_DO_REG 0x1de
+#define NI_M_AI_CFG_BYPASS_FIFO_REG 0x218
+#define NI_M_SCXI_DIO_ENA_REG 0x21c
+#define NI_M_CDI_FIFO_DATA_REG 0x220
+#define NI_M_CDO_FIFO_DATA_REG 0x220
+#define NI_M_CDIO_STATUS_REG 0x224
+#define NI_M_CDIO_CMD_REG 0x224
+#define NI_M_CDI_MODE_REG 0x228
+#define NI_M_CDO_MODE_REG 0x22c
+#define NI_M_CDI_MASK_ENA_REG 0x230
+#define NI_M_CDO_MASK_ENA_REG 0x234
+#define NI_M_STATIC_AI_CTRL_REG(x) ((x) ? (0x260 + (x)) : 0x064)
+#define NI_M_AO_REF_ATTENUATION_REG(x) (0x264 + (x))
enum MSeries_AI_Config_FIFO_Data_Bits {
MSeries_AI_Config_Channel_Type_Mask = 0x7 << 6,
--
2.3.0
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
