Rename the CamelCase and convert the enum into defines. Use the BIT()
macro to define the bits.
Convert the inline functions MSeries_PLL_Divisor_Bits() and
MSeries_PLL_Multiplier_Bits() to macros. The helper function
ni_mseries_get_pll_parameters() always returns valid values for the
'divisor' and 'multiplier' so the sanity checking can safely be
removed.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/ni_mio_common.c | 14 ++++------
drivers/staging/comedi/drivers/ni_stc.h | 38 +++++++-------------------
2 files changed, 15 insertions(+), 37 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index 9fef0e9..0a1f92e 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -4638,10 +4638,8 @@ static int ni_mseries_get_pll_parameters(unsigned reference_period_ns,
{
unsigned div;
unsigned best_div = 1;
- static const unsigned max_div = 0x10;
unsigned mult;
unsigned best_mult = 1;
- static const unsigned max_mult = 0x100;
static const unsigned pico_per_nano = 1000;
const unsigned reference_picosec = reference_period_ns * pico_per_nano;
@@ -4651,8 +4649,8 @@ static int ni_mseries_get_pll_parameters(unsigned reference_period_ns,
static const unsigned fudge_factor_80_to_20Mhz = 4;
int best_period_picosec = 0;
- for (div = 1; div <= max_div; ++div) {
- for (mult = 1; mult <= max_mult; ++mult) {
+ for (div = 1; div <= NI_M_PLL_MAX_DIVISOR; ++div) {
+ for (mult = 1; mult <= NI_M_PLL_MAX_MULTIPLIER; ++mult) {
unsigned new_period_ps =
(reference_picosec * div) / mult;
if (abs(new_period_ps - target_picosec) <
@@ -4700,8 +4698,7 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device *dev,
devpriv->rtsi_trig_direction_reg &= ~Use_RTSI_Clock_Bit;
ni_stc_writew(dev, devpriv->rtsi_trig_direction_reg,
RTSI_Trig_Direction_Register);
- pll_control_bits =
- MSeries_PLL_Enable_Bit | MSeries_PLL_VCO_Mode_75_150MHz_Bits;
+ pll_control_bits = NI_M_PLL_CTRL_ENA | NI_M_PLL_CTRL_VCO_MODE_75_150MHZ;
devpriv->clock_and_fout2 |= NI_M_CLK_FOUT2_TIMEBASE1_PLL |
NI_M_CLK_FOUT2_TIMEBASE3_PLL;
devpriv->clock_and_fout2 &= ~NI_M_CLK_FOUT2_PLL_SRC_MASK;
@@ -4736,9 +4733,8 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device *dev,
}
ni_writew(dev, devpriv->clock_and_fout2, NI_M_CLK_FOUT2_REG);
- pll_control_bits |=
- MSeries_PLL_Divisor_Bits(freq_divider) |
- MSeries_PLL_Multiplier_Bits(freq_multiplier);
+ pll_control_bits |= NI_M_PLL_CTRL_DIVISOR(freq_divider) |
+ NI_M_PLL_CTRL_MULTIPLIER(freq_multiplier);
ni_writew(dev, pll_control_bits, NI_M_PLL_CTRL_REG);
devpriv->clock_source = source;
diff --git a/drivers/staging/comedi/drivers/ni_stc.h b/drivers/staging/comedi/drivers/ni_stc.h
index 33adb63..f08124e 100644
--- a/drivers/staging/comedi/drivers/ni_stc.h
+++ b/drivers/staging/comedi/drivers/ni_stc.h
@@ -980,6 +980,16 @@ static const struct comedi_lrange range_ni_E_ao_ext;
#define NI_M_CLK_FOUT2_PLL_SRC_STAR NI_M_CLK_FOUT2_PLL_SRC(0x14)
#define NI_M_CLK_FOUT2_PLL_SRC_PXI10 NI_M_CLK_FOUT2_PLL_SRC(0x1d)
#define NI_M_PLL_CTRL_REG 0x1c6
+#define NI_M_PLL_CTRL_VCO_MODE(x) (((x) & 0x3) << 13)
+#define NI_M_PLL_CTRL_VCO_MODE_200_325MHZ NI_M_PLL_CTRL_VCO_MODE(0)
+#define NI_M_PLL_CTRL_VCO_MODE_175_225MHZ NI_M_PLL_CTRL_VCO_MODE(1)
+#define NI_M_PLL_CTRL_VCO_MODE_100_225MHZ NI_M_PLL_CTRL_VCO_MODE(2)
+#define NI_M_PLL_CTRL_VCO_MODE_75_150MHZ NI_M_PLL_CTRL_VCO_MODE(3)
+#define NI_M_PLL_CTRL_ENA BIT(12)
+#define NI_M_PLL_MAX_DIVISOR 0x10
+#define NI_M_PLL_CTRL_DIVISOR(x) (((x) & 0xf) << 8)
+#define NI_M_PLL_MAX_MULTIPLIER 0x100
+#define NI_M_PLL_CTRL_MULTIPLIER(x) (((x) & 0xff) << 0)
#define NI_M_PLL_STATUS_REG 0x1c8
#define NI_M_PFI_OUT_SEL_REG(x) (0x1d0 + ((x) * 2))
#define NI_M_PFI_DI_REG 0x1dc
@@ -997,34 +1007,6 @@ static const struct comedi_lrange range_ni_E_ao_ext;
#define NI_M_STATIC_AI_CTRL_REG(x) ((x) ? (0x260 + (x)) : 0x064)
#define NI_M_AO_REF_ATTENUATION_REG(x) (0x264 + (x))
-enum MSeries_PLL_Control_Bits {
- MSeries_PLL_Enable_Bit = 0x1000,
- MSeries_PLL_VCO_Mode_200_325MHz_Bits = 0x0,
- MSeries_PLL_VCO_Mode_175_225MHz_Bits = 0x2000,
- MSeries_PLL_VCO_Mode_100_225MHz_Bits = 0x4000,
- MSeries_PLL_VCO_Mode_75_150MHz_Bits = 0x6000,
-};
-static inline unsigned MSeries_PLL_Divisor_Bits(unsigned divisor)
-{
- static const unsigned max_divisor = 0x10;
- if (divisor < 1 || divisor > max_divisor) {
- pr_err("%s: bug, invalid divisor=%i\n", __func__, divisor);
- return 0;
- }
- return (divisor & 0xf) << 8;
-}
-
-static inline unsigned MSeries_PLL_Multiplier_Bits(unsigned multiplier)
-{
- static const unsigned max_multiplier = 0x100;
- if (multiplier < 1 || multiplier > max_multiplier) {
- pr_err("%s: bug, invalid multiplier=%i\n", __func__,
- multiplier);
- return 0;
- }
- return multiplier & 0xff;
-}
-
enum MSeries_PLL_Status {
MSeries_PLL_Locked_Bit = 0x1
};
--
2.3.0
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
