the lcd type as defined in the Kconfig is not matching in the code. as a result the rs, rw and en pins were getting interchanged. Kconfig defines the value of PANEL_LCD to be 1 if we select custom configuration but in the code LCD_TYPE_CUSTOM is defined as 5. my hardware is LCD_TYPE_CUSTOM, but the pins were assigned to it as pins of LCD_TYPE_OLD, and it was not working. Now values are corrected with referenece to the values defined in Kconfig and it is working. checked on JHD204A lcd with LCD_TYPE_CUSTOM configuration. Cc: <stable@xxxxxxxxxxxxxxx> # 2.6.32+ Signed-off-by: Sudip Mukherjee <sudip@xxxxxxxxxxxxxxx> --- v3: added the module_parameters v2: cc-ed stable drivers/staging/panel/panel.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index b7ffdfb..ea54fb4 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -335,11 +335,11 @@ static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES]; * LCD types */ #define LCD_TYPE_NONE 0 -#define LCD_TYPE_OLD 1 -#define LCD_TYPE_KS0074 2 -#define LCD_TYPE_HANTRONIX 3 -#define LCD_TYPE_NEXCOM 4 -#define LCD_TYPE_CUSTOM 5 +#define LCD_TYPE_CUSTOM 1 +#define LCD_TYPE_OLD 2 +#define LCD_TYPE_KS0074 3 +#define LCD_TYPE_HANTRONIX 4 +#define LCD_TYPE_NEXCOM 5 /* * keypad types @@ -500,7 +500,7 @@ MODULE_PARM_DESC(keypad_type, static int lcd_type = NOT_SET; module_param(lcd_type, int, 0000); MODULE_PARM_DESC(lcd_type, - "LCD type: 0=none, 1=old //, 2=serial ks0074, 3=hantronix //, 4=nexcom //, 5=compiled-in"); + "LCD type: 0=none, 1=compiled-in, 2=old, 3=serial ks0074, 4=hantronix, 5=nexcom"); static int lcd_height = NOT_SET; module_param(lcd_height, int, 0000); -- 1.8.1.2 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
