Re: [PATCH v3 5/9] mfd: rtsx: update phy register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 25 Feb 2015, micky_ching@xxxxxxxxxxxxxx wrote:

> From: Micky Ching <micky_ching@xxxxxxxxxxxxxx>
> 
> Update some phy register name and value for rts5249,
> the updated value makes chip more stable on some platform.
> 
> Signed-off-by: Micky Ching <micky_ching@xxxxxxxxxxxxxx>
> ---
>  drivers/mfd/rts5249.c        |  29 +++++++-----
>  include/linux/mfd/rtsx_pci.h | 109 ++++++++++++++++++++++---------------------
>  2 files changed, 72 insertions(+), 66 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
> index 2fe2854..8de8220 100644
> --- a/drivers/mfd/rts5249.c
> +++ b/drivers/mfd/rts5249.c
> @@ -132,11 +132,12 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
>  	if (err < 0)
>  		return err;
>  
> -	err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV,
> -			PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED |
> -			PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN |
> -			PHY_REG_REV_RX_PWST | PHY_REG_REV_CLKREQ_DLY_TIMER_1_0 |
> -			PHY_REG_REV_STOP_CLKRD | PHY_REG_REV_STOP_CLKWR);
> +	err = rtsx_pci_write_phy_register(pcr, PHY_REV,
> +			PHY_REV_RESV | PHY_REV_RXIDLE_LATCHED |
> +			PHY_REV_P1_EN | PHY_REV_RXIDLE_EN |
> +			PHY_REV_CLKREQ_TX_EN | PHY_REV_RX_PWST |
> +			PHY_REV_CLKREQ_DT_1_0 | PHY_REV_STOP_CLKRD |
> +			PHY_REV_STOP_CLKWR);
>  	if (err < 0)
>  		return err;
>  
> @@ -147,19 +148,21 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
>  			PHY_BPCR_IB_FILTER | PHY_BPCR_CMIRROR_EN);
>  	if (err < 0)
>  		return err;
> +
>  	err = rtsx_pci_write_phy_register(pcr, PHY_PCR,
>  			PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
>  			PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 |
> -			PHY_PCR_RSSI_EN);
> +			PHY_PCR_RSSI_EN | PHY_PCR_RX10K);
>  	if (err < 0)
>  		return err;
> +
>  	err = rtsx_pci_write_phy_register(pcr, PHY_RCR2,
>  			PHY_RCR2_EMPHASE_EN | PHY_RCR2_NADJR |
> -			PHY_RCR2_CDR_CP_10 | PHY_RCR2_CDR_SR_2 |
> -			PHY_RCR2_FREQSEL_12 | PHY_RCR2_CPADJEN |
> -			PHY_RCR2_CDR_SC_8 | PHY_RCR2_CALIB_LATE);
> +			PHY_RCR2_CDR_SR_2 | PHY_RCR2_FREQSEL_12 |
> +			PHY_RCR2_CDR_SC_12P | PHY_RCR2_CALIB_LATE);
>  	if (err < 0)
>  		return err;
> +
>  	err = rtsx_pci_write_phy_register(pcr, PHY_FLD4,
>  			PHY_FLD4_FLDEN_SEL | PHY_FLD4_REQ_REF |
>  			PHY_FLD4_RXAMP_OFF | PHY_FLD4_REQ_ADDA |
> @@ -167,11 +170,12 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
>  			PHY_FLD4_BER_CHK_EN);
>  	if (err < 0)
>  		return err;
> -	err = rtsx_pci_write_phy_register(pcr, PHY_RDR, PHY_RDR_RXDSEL_1_9);
> +	err = rtsx_pci_write_phy_register(pcr, PHY_RDR,
> +			PHY_RDR_RXDSEL_1_9 | PHY_SSC_AUTO_PWD);
>  	if (err < 0)
>  		return err;
>  	err = rtsx_pci_write_phy_register(pcr, PHY_RCR1,
> -			PHY_RCR1_ADP_TIME | PHY_RCR1_VCO_COARSE);
> +			PHY_RCR1_ADP_TIME_4 | PHY_RCR1_VCO_COARSE);
>  	if (err < 0)
>  		return err;
>  	err = rtsx_pci_write_phy_register(pcr, PHY_FLD3,
> @@ -179,10 +183,11 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
>  			PHY_FLD3_RXDELINK);
>  	if (err < 0)
>  		return err;
> +
>  	return rtsx_pci_write_phy_register(pcr, PHY_TUNE,
>  			PHY_TUNE_TUNEREF_1_0 | PHY_TUNE_VBGSEL_1252 |
>  			PHY_TUNE_SDBUS_33 | PHY_TUNE_TUNED18 |
> -			PHY_TUNE_TUNED12);
> +			PHY_TUNE_TUNED12 | PHY_TUNE_TUNEA12);
>  }
>  
>  static int rts5249_turn_on_led(struct rtsx_pcr *pcr)
> diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
> index 87cff60..0103210 100644
> --- a/include/linux/mfd/rtsx_pci.h
> +++ b/include/linux/mfd/rtsx_pci.h
> @@ -630,16 +630,47 @@
>  
>  /* Phy register */
>  #define PHY_PCR				0x00
> +#define   PHY_PCR_FORCE_CODE		0xB000
> +#define   PHY_PCR_OOBS_CALI_50		0x0800
> +#define   PHY_PCR_OOBS_VCM_08		0x0200
> +#define   PHY_PCR_OOBS_SEN_90		0x0040
> +#define   PHY_PCR_RSSI_EN		0x0002
> +#define   PHY_PCR_RX10K			0x0001
> +
>  #define PHY_RCR0			0x01
>  #define PHY_RCR1			0x02
> +#define   PHY_RCR1_ADP_TIME_4		0x0400
> +#define   PHY_RCR1_VCO_COARSE		0x001F
> +
>  #define PHY_RCR2			0x03
> +#define   PHY_RCR2_EMPHASE_EN		0x8000
> +#define   PHY_RCR2_NADJR		0x4000
> +#define   PHY_RCR2_CDR_SR_2		0x0100
> +#define   PHY_RCR2_FREQSEL_12		0x0040
> +#define   PHY_RCR2_CDR_SC_12P		0x0010
> +#define   PHY_RCR2_CALIB_LATE		0x0002
> +
>  #define PHY_RTCR			0x04
>  #define PHY_RDR				0x05
> +#define   PHY_RDR_RXDSEL_1_9		0x4000
> +#define   PHY_SSC_AUTO_PWD		0x0600
>  #define PHY_TCR0			0x06
>  #define PHY_TCR1			0x07
>  #define PHY_TUNE			0x08
> +#define   PHY_TUNE_TUNEREF_1_0		0x4000
> +#define   PHY_TUNE_VBGSEL_1252		0x0C00
> +#define   PHY_TUNE_SDBUS_33		0x0200
> +#define   PHY_TUNE_TUNED18		0x01C0
> +#define   PHY_TUNE_TUNED12		0X0020
> +#define   PHY_TUNE_TUNEA12		0x0004
> +
>  #define PHY_IMR				0x09
>  #define PHY_BPCR			0x0A
> +#define   PHY_BPCR_IBRXSEL		0x0400
> +#define   PHY_BPCR_IBTXSEL		0x0100
> +#define   PHY_BPCR_IB_FILTER		0x0080
> +#define   PHY_BPCR_CMIRROR_EN		0x0040
> +
>  #define PHY_BIST			0x0B
>  #define PHY_RAW_L			0x0C
>  #define PHY_RAW_H			0x0D
> @@ -654,12 +685,35 @@
>  #define PHY_BPNR			0x16
>  #define PHY_BRNR2			0x17
>  #define PHY_BENR			0x18
> -#define PHY_REG_REV			0x19
> +#define PHY_REV				0x19
> +#define   PHY_REV_RESV			0xE000
> +#define   PHY_REV_RXIDLE_LATCHED	0x1000
> +#define   PHY_REV_P1_EN			0x0800
> +#define   PHY_REV_RXIDLE_EN		0x0400
> +#define   PHY_REV_CLKREQ_TX_EN		0x0200
> +#define   PHY_REV_CLKREQ_RX_EN		0x0100
> +#define   PHY_REV_CLKREQ_DT_1_0		0x0040
> +#define   PHY_REV_STOP_CLKRD		0x0020
> +#define   PHY_REV_RX_PWST		0x0008
> +#define   PHY_REV_STOP_CLKWR		0x0004
> +
>  #define PHY_FLD0			0x1A
>  #define PHY_FLD1			0x1B
>  #define PHY_FLD2			0x1C
>  #define PHY_FLD3			0x1D
> +#define   PHY_FLD3_TIMER_4		0x0800
> +#define   PHY_FLD3_TIMER_6		0x0020
> +#define   PHY_FLD3_RXDELINK		0x0004
> +
>  #define PHY_FLD4			0x1E
> +#define   PHY_FLD4_FLDEN_SEL		0x4000
> +#define   PHY_FLD4_REQ_REF		0x2000
> +#define   PHY_FLD4_RXAMP_OFF		0x1000
> +#define   PHY_FLD4_REQ_ADDA		0x0800
> +#define   PHY_FLD4_BER_COUNT		0x00E0
> +#define   PHY_FLD4_BER_TIMER		0x000A
> +#define   PHY_FLD4_BER_CHK_EN		0x0001
> +
>  #define PHY_DUM_REG			0x1F
>  
>  #define LCTLR				0x80
> @@ -675,59 +729,6 @@
>  #define PCR_SETTING_REG2		0x814
>  #define PCR_SETTING_REG3		0x747
>  
> -/* Phy bits */
> -#define PHY_PCR_FORCE_CODE			0xB000
> -#define PHY_PCR_OOBS_CALI_50			0x0800
> -#define PHY_PCR_OOBS_VCM_08			0x0200
> -#define PHY_PCR_OOBS_SEN_90			0x0040
> -#define PHY_PCR_RSSI_EN				0x0002
> -
> -#define PHY_RCR1_ADP_TIME			0x0100
> -#define PHY_RCR1_VCO_COARSE			0x001F
> -
> -#define PHY_RCR2_EMPHASE_EN			0x8000
> -#define PHY_RCR2_NADJR				0x4000
> -#define PHY_RCR2_CDR_CP_10			0x0400
> -#define PHY_RCR2_CDR_SR_2			0x0100
> -#define PHY_RCR2_FREQSEL_12			0x0040
> -#define PHY_RCR2_CPADJEN			0x0020
> -#define PHY_RCR2_CDR_SC_8			0x0008
> -#define PHY_RCR2_CALIB_LATE			0x0002
> -
> -#define PHY_RDR_RXDSEL_1_9			0x4000
> -
> -#define PHY_TUNE_TUNEREF_1_0			0x4000
> -#define PHY_TUNE_VBGSEL_1252			0x0C00
> -#define PHY_TUNE_SDBUS_33			0x0200
> -#define PHY_TUNE_TUNED18			0x01C0
> -#define PHY_TUNE_TUNED12			0X0020
> -
> -#define PHY_BPCR_IBRXSEL			0x0400
> -#define PHY_BPCR_IBTXSEL			0x0100
> -#define PHY_BPCR_IB_FILTER			0x0080
> -#define PHY_BPCR_CMIRROR_EN			0x0040
> -
> -#define PHY_REG_REV_RESV			0xE000
> -#define PHY_REG_REV_RXIDLE_LATCHED		0x1000
> -#define PHY_REG_REV_P1_EN			0x0800
> -#define PHY_REG_REV_RXIDLE_EN			0x0400
> -#define PHY_REG_REV_CLKREQ_DLY_TIMER_1_0	0x0040
> -#define PHY_REG_REV_STOP_CLKRD			0x0020
> -#define PHY_REG_REV_RX_PWST			0x0008
> -#define PHY_REG_REV_STOP_CLKWR			0x0004
> -
> -#define PHY_FLD3_TIMER_4			0x7800
> -#define PHY_FLD3_TIMER_6			0x00E0
> -#define PHY_FLD3_RXDELINK			0x0004
> -
> -#define PHY_FLD4_FLDEN_SEL			0x4000
> -#define PHY_FLD4_REQ_REF			0x2000
> -#define PHY_FLD4_RXAMP_OFF			0x1000
> -#define PHY_FLD4_REQ_ADDA			0x0800
> -#define PHY_FLD4_BER_COUNT			0x00E0
> -#define PHY_FLD4_BER_TIMER			0x000A
> -#define PHY_FLD4_BER_CHK_EN			0x0001
> -
>  #define rtsx_pci_init_cmd(pcr)		((pcr)->ci = 0)
>  
>  struct rtsx_pcr;

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel





[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux