This driver uses an 8254 timer to generate the pacer clock used for analog input data acquisition. Convert it to use the comedi_8254 module to provide support for the 8254 timer. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- v2: fix logic error with 'regshift' drivers/staging/comedi/Kconfig | 1 + drivers/staging/comedi/drivers/adl_pci9111.c | 39 +++++++--------------------- 2 files changed, 10 insertions(+), 30 deletions(-) diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index b92fa05..de1d7ad 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -719,6 +719,7 @@ config COMEDI_ADL_PCI8164 config COMEDI_ADL_PCI9111 tristate "ADLink PCI-9111HR support" + select COMEDI_8254 ---help--- Enable support for ADlink PCI9111 cards diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c index f68dc99..3f82fa0 100644 --- a/drivers/staging/comedi/drivers/adl_pci9111.c +++ b/drivers/staging/comedi/drivers/adl_pci9111.c @@ -71,9 +71,9 @@ TODO: #include "../comedidev.h" -#include "8253.h" #include "plx9052.h" #include "comedi_fc.h" +#include "comedi_8254.h" #define PCI9111_FIFO_HALF_SIZE 512 @@ -137,9 +137,6 @@ struct pci9111_private_data { unsigned int chunk_counter; unsigned int chunk_num_samples; - unsigned int div1; - unsigned int div2; - unsigned short ai_bounce_buffer[2 * PCI9111_FIFO_HALF_SIZE]; }; @@ -167,21 +164,6 @@ static void plx9050_interrupt_control(unsigned long io_base, outb(flags, io_base + PLX9052_INTCSR); } -static void pci9111_timer_set(struct comedi_device *dev) -{ - struct pci9111_private_data *dev_private = dev->private; - unsigned long timer_base = dev->iobase + PCI9111_8254_BASE_REG; - - i8254_set_mode(timer_base, 1, 0, I8254_MODE0 | I8254_BINARY); - i8254_set_mode(timer_base, 1, 1, I8254_MODE2 | I8254_BINARY); - i8254_set_mode(timer_base, 1, 2, I8254_MODE2 | I8254_BINARY); - - udelay(1); - - i8254_write(timer_base, 1, 2, dev_private->div2); - i8254_write(timer_base, 1, 1, dev_private->div1); -} - enum pci9111_ISC0_sources { irq_on_eoc, irq_on_fifo_half_full @@ -281,7 +263,6 @@ static int pci9111_ai_do_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd) { - struct pci9111_private_data *dev_private = dev->private; int err = 0; unsigned int arg; @@ -345,10 +326,7 @@ static int pci9111_ai_do_cmd_test(struct comedi_device *dev, if (cmd->convert_src == TRIG_TIMER) { arg = cmd->convert_arg; - i8253_cascade_ns_to_timer(I8254_OSC_BASE_2MHZ, - &dev_private->div1, - &dev_private->div2, - &arg, cmd->flags); + comedi_8254_cascade_ns_to_timer(dev->pacer, &arg, cmd->flags); err |= cfc_check_trigger_arg_is(&cmd->convert_arg, arg); } @@ -406,7 +384,8 @@ static int pci9111_ai_do_cmd(struct comedi_device *dev, dev_private->scan_delay = 0; if (cmd->convert_src == TRIG_TIMER) { trig |= PCI9111_AI_TRIG_CTRL_TPST; - pci9111_timer_set(dev); + comedi_8254_update_divisors(dev->pacer); + comedi_8254_pacer_enable(dev->pacer, 1, 2, true); pci9111_fifo_reset(dev); pci9111_interrupt_source_set(dev, irq_on_fifo_half_full, irq_on_timer_tick); @@ -667,11 +646,6 @@ static int pci9111_reset(struct comedi_device *dev) /* disable A/D triggers (software trigger mode) and auto scan off */ outb(0, dev->iobase + PCI9111_AI_TRIG_CTRL_REG); - /* Reset 8254 chip */ - dev_private->div1 = 0; - dev_private->div2 = 0; - pci9111_timer_set(dev); - return 0; } @@ -702,6 +676,11 @@ static int pci9111_auto_attach(struct comedi_device *dev, dev->irq = pcidev->irq; } + dev->pacer = comedi_8254_init(dev->iobase + PCI9111_8254_BASE_REG, + I8254_OSC_BASE_2MHZ, I8254_IO16, 0); + if (!dev->pacer) + return -ENOMEM; + ret = comedi_alloc_subdevices(dev, 4); if (ret) return ret; -- 2.3.0 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel