Re: [PATCH 0/3] memory_hotplug: hyperv: fix deadlock between memory adding and onlining

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 11 Feb 2015, David Rientjes wrote:

> > If newly added memory is brought online with e.g. udev rule:
> > SUBSYSTEM=="memory", ACTION=="add", ATTR{state}="online"
> > the following deadlock is observed (and easily reproducable):
> > 
> > First participant, worker thread doing add_memory():
> > 
> > [  724.948846] kworker/0:1     D ffff88000412f9c8 13248    27      2 0x00000000
> > [  724.973543] Workqueue: events hot_add_req [hv_balloon]
> > [  724.991736]  ffff88000412f9c8 0000000000000000 ffff88003fa1dc30 00000000000151c0
> > [  725.019725]  0000000000000246 ffff88000412ffd8 00000000000151c0 ffff88003a77a4e0
> > [  725.046486]  ffff88003fa1dc30 00000001032a6000 ffff88003a7ca838 ffff88003a7ca898
> > [  725.072969] Call Trace:
> > [  725.082690]  [<ffffffff81aac0a9>] schedule_preempt_disabled+0x29/0x70
> > [  725.103799]  [<ffffffff81aae33b>] mutex_lock_nested+0x14b/0x470
> > [  725.122367]  [<ffffffff815ed773>] ? device_attach+0x23/0xb0
> > [  725.140992]  [<ffffffff815ed773>] device_attach+0x23/0xb0
> > [  725.159131]  [<ffffffff815ecba0>] bus_probe_device+0xb0/0xe0
> > [  725.177055]  [<ffffffff815ea693>] device_add+0x443/0x650
> > [  725.195558]  [<ffffffff815ea8be>] device_register+0x1e/0x30
> > [  725.213133]  [<ffffffff81601790>] init_memory_block+0xd0/0xf0
> > [  725.231533]  [<ffffffff816018f1>] register_new_memory+0xb1/0xd0
> > [  725.250769]  [<ffffffff81a961cf>] __add_pages+0x13f/0x250
> > [  725.269642]  [<ffffffff81063770>] ? arch_add_memory+0x70/0xf0
> > [  725.288764]  [<ffffffff81063770>] arch_add_memory+0x70/0xf0
> > [  725.306117]  [<ffffffff81a95f8f>] add_memory+0xef/0x1f0
> > [  725.322466]  [<ffffffffa00293af>] hot_add_req+0x33f/0xf90 [hv_balloon]
> > [  725.342777]  [<ffffffff8109509f>] process_one_work+0x1df/0x4e0
> > [  725.361459]  [<ffffffff8109502d>] ? process_one_work+0x16d/0x4e0
> > [  725.380390]  [<ffffffff810954bb>] worker_thread+0x11b/0x450
> > [  725.397684]  [<ffffffff810953a0>] ? process_one_work+0x4e0/0x4e0
> > [  725.416533]  [<ffffffff8109ac33>] kthread+0xf3/0x110
> > [  725.433372]  [<ffffffff8109ab40>] ? kthread_create_on_node+0x240/0x240
> > [  725.453749]  [<ffffffff81ab1dfc>] ret_from_fork+0x7c/0xb0
> > [  725.470994]  [<ffffffff8109ab40>] ? kthread_create_on_node+0x240/0x240
> > [  725.491469] 6 locks held by kworker/0:1/27:
> > [  725.505037]  #0:  ("events"){......}, at: [<ffffffff8109502d>] process_one_work+0x16d/0x4e0
> > [  725.533370]  #1:  ((&dm_device.ha_wrk.wrk)){......}, at: [<ffffffff8109502d>] process_one_work+0x16d/0x4e0
> > [  725.565580]  #2:  (mem_hotplug.lock){......}, at: [<ffffffff811e6525>] mem_hotplug_begin+0x5/0x80
> > [  725.594369]  #3:  (mem_hotplug.lock#2){......}, at: [<ffffffff811e656f>] mem_hotplug_begin+0x4f/0x80
> > [  725.628554]  #4:  (mem_sysfs_mutex){......}, at: [<ffffffff81601873>] register_new_memory+0x33/0xd0
> > [  725.658519]  #5:  (&dev->mutex){......}, at: [<ffffffff815ed773>] device_attach+0x23/0xb0
> > 
> > Second participant, udev:
> > 
> > [  725.750889] systemd-udevd   D ffff88003b94fc68 14016   888    530 0x00000004
> > [  725.773767]  ffff88003b94fc68 0000000000000000 ffff8800034949c0 00000000000151c0
> > [  725.798332]  ffffffff8210d980 ffff88003b94ffd8 00000000000151c0 ffff880037a69270
> > [  725.822841]  ffff8800034949c0 0000000100000001 ffff8800034949c0 ffffffff81ff2b48
> > [  725.849184] Call Trace:
> > [  725.858987]  [<ffffffff81aac0a9>] schedule_preempt_disabled+0x29/0x70
> > [  725.879231]  [<ffffffff81aae33b>] mutex_lock_nested+0x14b/0x470
> > [  725.897860]  [<ffffffff811e656f>] ? mem_hotplug_begin+0x4f/0x80
> > [  725.916698]  [<ffffffff811e656f>] mem_hotplug_begin+0x4f/0x80
> > [  725.935064]  [<ffffffff811e6525>] ? mem_hotplug_begin+0x5/0x80
> > [  725.953464]  [<ffffffff81a9631b>] online_pages+0x3b/0x520
> > [  725.971542]  [<ffffffff815eb0b3>] ? device_online+0x23/0xa0
> > [  725.989207]  [<ffffffff81601524>] memory_subsys_online+0x64/0xc0
> > [  726.008513]  [<ffffffff815eb0fd>] device_online+0x6d/0xa0
> > [  726.025579]  [<ffffffff816012eb>] store_mem_state+0x5b/0xe0
> > [  726.043400]  [<ffffffff815e8258>] dev_attr_store+0x18/0x30
> > [  726.060506]  [<ffffffff8127a808>] sysfs_kf_write+0x48/0x60
> > [  726.077940]  [<ffffffff81279d1b>] kernfs_fop_write+0x13b/0x1a0
> > [  726.099416]  [<ffffffff811f9f67>] vfs_write+0xb7/0x1f0
> > [  726.115748]  [<ffffffff811fabf8>] SyS_write+0x58/0xd0
> > [  726.131933]  [<ffffffff81ab1ea9>] system_call_fastpath+0x12/0x17
> > [  726.150691] 7 locks held by systemd-udevd/888:
> > [  726.165044]  #0:  (sb_writers#3){......}, at: [<ffffffff811fa063>] vfs_write+0x1b3/0x1f0
> > [  726.192422]  #1:  (&of->mutex){......}, at: [<ffffffff81279c46>] kernfs_fop_write+0x66/0x1a0
> > [  726.220289]  #2:  (s_active#60){......}, at: [<ffffffff81279c4e>] kernfs_fop_write+0x6e/0x1a0
> > [  726.249382]  #3:  (device_hotplug_lock){......}, at: [<ffffffff815e9c15>] lock_device_hotplug_sysfs+0x15/0x50
> > [  726.281901]  #4:  (&dev->mutex){......}, at: [<ffffffff815eb0b3>] device_online+0x23/0xa0
> > [  726.308619]  #5:  (mem_hotplug.lock){......}, at: [<ffffffff811e6525>] mem_hotplug_begin+0x5/0x80
> > [  726.337994]  #6:  (mem_hotplug.lock#2){......}, at: [<ffffffff811e656f>] mem_hotplug_begin+0x4f/0x80
> > 
> > In short: onlining grabs device lock and then tries to do mem_hotplug_begin()
> > while add_memory() is between mem_hotplug_begin() and mem_hotplug_done() and it
> > tries grabbing device lock.
> > 
> > To my understanding ACPI memory hotplug doesn't have the same issue as
> > device_hotplug_lock is being grabbed when the ACPI device is added.
> > 
> > Solve the issue by grabbing device_hotplug_lock before doing add_memory(). If
> > we do that, lock_device_hotplug_sysfs() will cause syscall retry which will
> > eventually succeed. To support the change we need to export lock_device_hotplug/
> > unlock_device_hotplug. This approach can be completely wrong though.
> 
> Saying the approach could be completely wrong doesn't inspire a lot of 
> confidence.  I assume this output is from the hung task detector, is there 
> any other lockdep output that suggests there's a possible deadlock?
> 

Ok, I looked at this and the problem is that kworker/0 is onlining memory 
and serializes memory hot-add with mem_hotplug_begin() before registering 
the new memory block.  This is the appropriate lock ordering, we want to 
do mem_hotplug_begin() before device_lock(dev) which takes dev->mutex 
since we must disallow concurrent hot-add events from looking up the same 
memory block.

The issue only arises when systemd-udevd takes device_lock(dev) to 
transition a memory block from offline to online and 
memory_subsys_online() callbacks require mem_hotplug_begin().

Understanding this is pretty simple: in the kworker/0 case, we must create 
a memory block and add the range by probing; in the systemd-udevd case, we 
already have a memory block and need to transition its state.

Your approach to resolve this dependency is to serialize all of this with 
device_hotplug_lock so that only one thread can be doing 
mem_hotplug_begin() -> device_lock() or device_lock() -> 
mem_hotplug_begin() at a time.  I don't think resolving a locking 
dependency is appropriate by just serializing them with another lock; 
rather, I think the solution is to truly make one lock depend on the other 
for memory hotplug.

I already mentioned that the appropriate lock ordering is 
mem_hotplug_begin() -> device_lock() since we can't possibly know the 
device that we are onlining for probe (we must create a new device, it 
didn't exist before probe).

So all we need to do is require store_mem_state() to take 
mem_hotplug_begin() before doing device_online() and requiring all  
memory_subsys_online() callbacks to assume the protection, which they 
already require anyway.

Could you try this patch out instead of your series?  I did it for memory 
hot-remove as well just to simplify the dependency, but it would also be 
possible to just do mem_hotplug_begin() when onlining since we already 
have the memory block registered for hot-remove.  It's simpler this way.
---
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -219,6 +219,7 @@ static bool pages_correctly_reserved(unsigned long start_pfn)
 /*
  * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is
  * OK to have direct references to sparsemem variables in here.
+ * Must already be protected by mem_hotplug_begin().
  */
 static int
 memory_block_action(unsigned long phys_index, unsigned long action, int online_type)
@@ -286,6 +287,7 @@ static int memory_subsys_online(struct device *dev)
 	if (mem->online_type < 0)
 		mem->online_type = MMOP_ONLINE_KEEP;
 
+	/* Already under protection of mem_hotplug_begin() */
 	ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE);
 
 	/* clear online_type */
@@ -328,17 +330,19 @@ store_mem_state(struct device *dev,
 		goto err;
 	}
 
+	/*
+	 * Memory hotplug needs to hold mem_hotplug_begin() for probe to find
+	 * the correct memory block to online before doing device_online(dev),
+	 * which will take dev->mutex.  Take the lock early to prevent an
+	 * inversion, memory_subsys_online() callbacks will be implemented by
+	 * assuming it's already protected.
+	 */
+	mem_hotplug_begin();
+
 	switch (online_type) {
 	case MMOP_ONLINE_KERNEL:
 	case MMOP_ONLINE_MOVABLE:
 	case MMOP_ONLINE_KEEP:
-		/*
-		 * mem->online_type is not protected so there can be a
-		 * race here.  However, when racing online, the first
-		 * will succeed and the second will just return as the
-		 * block will already be online.  The online type
-		 * could be either one, but that is expected.
-		 */
 		mem->online_type = online_type;
 		ret = device_online(&mem->dev);
 		break;
@@ -349,6 +353,8 @@ store_mem_state(struct device *dev,
 		ret = -EINVAL; /* should never happen */
 	}
 
+	mem_hotplug_done();
+
 err:
 	unlock_device_hotplug();
 
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -192,6 +192,9 @@ extern void get_page_bootmem(unsigned long ingo, struct page *page,
 void get_online_mems(void);
 void put_online_mems(void);
 
+void mem_hotplug_begin(void);
+void mem_hotplug_done(void);
+
 #else /* ! CONFIG_MEMORY_HOTPLUG */
 /*
  * Stub functions for when hotplug is off
@@ -231,6 +234,9 @@ static inline int try_online_node(int nid)
 static inline void get_online_mems(void) {}
 static inline void put_online_mems(void) {}
 
+static inline void mem_hotplug_begin(void) {}
+static inline void mem_hotplug_done(void) {}
+
 #endif /* ! CONFIG_MEMORY_HOTPLUG */
 
 #ifdef CONFIG_MEMORY_HOTREMOVE
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -104,7 +104,7 @@ void put_online_mems(void)
 
 }
 
-static void mem_hotplug_begin(void)
+void mem_hotplug_begin(void)
 {
 	mem_hotplug.active_writer = current;
 
@@ -119,7 +119,7 @@ static void mem_hotplug_begin(void)
 	}
 }
 
-static void mem_hotplug_done(void)
+void mem_hotplug_done(void)
 {
 	mem_hotplug.active_writer = NULL;
 	mutex_unlock(&mem_hotplug.lock);
@@ -959,6 +959,7 @@ static void node_states_set_node(int node, struct memory_notify *arg)
 }
 
 
+/* Must be protected by mem_hotplug_begin() */
 int __ref online_pages(unsigned long pfn, unsigned long nr_pages, int online_type)
 {
 	unsigned long flags;
@@ -969,7 +970,6 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, int online_typ
 	int ret;
 	struct memory_notify arg;
 
-	mem_hotplug_begin();
 	/*
 	 * This doesn't need a lock to do pfn_to_page().
 	 * The section can't be removed here because of the
@@ -977,21 +977,20 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, int online_typ
 	 */
 	zone = page_zone(pfn_to_page(pfn));
 
-	ret = -EINVAL;
 	if ((zone_idx(zone) > ZONE_NORMAL ||
 	    online_type == MMOP_ONLINE_MOVABLE) &&
 	    !can_online_high_movable(zone))
-		goto out;
+		return -EINVAL;
 
 	if (online_type == MMOP_ONLINE_KERNEL &&
 	    zone_idx(zone) == ZONE_MOVABLE) {
 		if (move_pfn_range_left(zone - 1, zone, pfn, pfn + nr_pages))
-			goto out;
+			return -EINVAL;
 	}
 	if (online_type == MMOP_ONLINE_MOVABLE &&
 	    zone_idx(zone) == ZONE_MOVABLE - 1) {
 		if (move_pfn_range_right(zone, zone + 1, pfn, pfn + nr_pages))
-			goto out;
+			return -EINVAL;
 	}
 
 	/* Previous code may changed the zone of the pfn range */
@@ -1007,7 +1006,7 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, int online_typ
 	ret = notifier_to_errno(ret);
 	if (ret) {
 		memory_notify(MEM_CANCEL_ONLINE, &arg);
-		goto out;
+		return ret;
 	}
 	/*
 	 * If this zone is not populated, then it is not in zonelist.
@@ -1031,7 +1030,7 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, int online_typ
 		       (((unsigned long long) pfn + nr_pages)
 			    << PAGE_SHIFT) - 1);
 		memory_notify(MEM_CANCEL_ONLINE, &arg);
-		goto out;
+		return ret;
 	}
 
 	zone->present_pages += onlined_pages;
@@ -1061,9 +1060,8 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, int online_typ
 
 	if (onlined_pages)
 		memory_notify(MEM_ONLINE, &arg);
-out:
-	mem_hotplug_done();
-	return ret;
+
+	return 0;
 }
 #endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
 
@@ -1684,21 +1682,18 @@ static int __ref __offline_pages(unsigned long start_pfn,
 	if (!test_pages_in_a_zone(start_pfn, end_pfn))
 		return -EINVAL;
 
-	mem_hotplug_begin();
-
 	zone = page_zone(pfn_to_page(start_pfn));
 	node = zone_to_nid(zone);
 	nr_pages = end_pfn - start_pfn;
 
-	ret = -EINVAL;
 	if (zone_idx(zone) <= ZONE_NORMAL && !can_offline_normal(zone, nr_pages))
-		goto out;
+		return -EINVAL;
 
 	/* set above range as isolated */
 	ret = start_isolate_page_range(start_pfn, end_pfn,
 				       MIGRATE_MOVABLE, true);
 	if (ret)
-		goto out;
+		return ret;
 
 	arg.start_pfn = start_pfn;
 	arg.nr_pages = nr_pages;
@@ -1791,7 +1786,6 @@ repeat:
 	writeback_set_ratelimit();
 
 	memory_notify(MEM_OFFLINE, &arg);
-	mem_hotplug_done();
 	return 0;
 
 failed_removal:
@@ -1801,12 +1795,10 @@ failed_removal:
 	memory_notify(MEM_CANCEL_OFFLINE, &arg);
 	/* pushback to free area */
 	undo_isolate_page_range(start_pfn, end_pfn, MIGRATE_MOVABLE);
-
-out:
-	mem_hotplug_done();
 	return ret;
 }
 
+/* Must be protected by mem_hotplug_begin() */
 int offline_pages(unsigned long start_pfn, unsigned long nr_pages)
 {
 	return __offline_pages(start_pfn, start_pfn + nr_pages, 120 * HZ);
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux