Removed checkpatch.pl below warning
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Pushpendra Singh <pushpendra.singh@xxxxxxxxxxxxxxx>
---
drivers/staging/rtl8188eu/hal/bb_cfg.c | 15 +++++++--------
drivers/staging/rtl8188eu/hal/fw.c | 3 +--
drivers/staging/rtl8188eu/hal/odm_HWConfig.c | 5 ++---
drivers/staging/rtl8188eu/hal/odm_RTL8188E.c | 3 +--
drivers/staging/rtl8188eu/hal/phy.c | 12 ++++--------
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c | 6 ++----
drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c | 3 +--
drivers/staging/rtl8188eu/hal/usb_halinit.c | 3 +--
8 files changed, 19 insertions(+), 31 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/bb_cfg.c b/drivers/staging/rtl8188eu/hal/bb_cfg.c
index 1e963bf..76d3db1 100644
--- a/drivers/staging/rtl8188eu/hal/bb_cfg.c
+++ b/drivers/staging/rtl8188eu/hal/bb_cfg.c
@@ -554,21 +554,20 @@ static void store_pwrindex_offset(struct adapter *Adapter, u32 regaddr, u32 bitm
static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask, u32 data)
{
- if (addr == 0xfe) {
+ if (addr == 0xfe)
msleep(50);
- } else if (addr == 0xfd) {
+ else if (addr == 0xfd)
mdelay(5);
- } else if (addr == 0xfc) {
+ else if (addr == 0xfc)
mdelay(1);
- } else if (addr == 0xfb) {
+ else if (addr == 0xfb)
udelay(50);
- } else if (addr == 0xfa) {
+ else if (addr == 0xfa)
udelay(5);
- } else if (addr == 0xf9) {
+ else if (addr == 0xf9)
udelay(1);
- } else{
+ else
store_pwrindex_offset(adapt, addr, bit_mask, data);
- }
}
static bool config_bb_with_pgheader(struct adapter *adapt)
diff --git a/drivers/staging/rtl8188eu/hal/fw.c b/drivers/staging/rtl8188eu/hal/fw.c
index 3b28754..a71c542 100644
--- a/drivers/staging/rtl8188eu/hal/fw.c
+++ b/drivers/staging/rtl8188eu/hal/fw.c
@@ -154,9 +154,8 @@ static int _rtl88e_fw_free_to_go(struct adapter *adapt)
break;
} while (counter++ < POLLING_READY_TIMEOUT_COUNT);
- if (counter >= POLLING_READY_TIMEOUT_COUNT) {
+ if (counter >= POLLING_READY_TIMEOUT_COUNT)
goto exit;
- }
value32 = usb_read32(adapt, REG_MCUFWDL);
value32 |= MCUFWDL_RDY;
diff --git a/drivers/staging/rtl8188eu/hal/odm_HWConfig.c b/drivers/staging/rtl8188eu/hal/odm_HWConfig.c
index 29f87df..7213187 100644
--- a/drivers/staging/rtl8188eu/hal/odm_HWConfig.c
+++ b/drivers/staging/rtl8188eu/hal/odm_HWConfig.c
@@ -418,11 +418,10 @@ static void ODM_PhyStatusQuery_92CSeries(struct odm_dm_struct *dm_odm,
{
odm_RxPhyStatus92CSeries_Parsing(dm_odm, pPhyInfo, pPhyStatus,
pPktinfo);
- if (dm_odm->RSSI_test) {
+ if (dm_odm->RSSI_test)
;/* Select the packets to do RSSI checking for antenna switching. */
- } else {
+ else
odm_Process_RSSIForDM(dm_odm, pPhyInfo, pPktinfo);
- }
}
void ODM_PhyStatusQuery(struct odm_dm_struct *dm_odm,
diff --git a/drivers/staging/rtl8188eu/hal/odm_RTL8188E.c b/drivers/staging/rtl8188eu/hal/odm_RTL8188E.c
index d3c6873..fd7930f 100644
--- a/drivers/staging/rtl8188eu/hal/odm_RTL8188E.c
+++ b/drivers/staging/rtl8188eu/hal/odm_RTL8188E.c
@@ -103,9 +103,8 @@ static void dm_fast_training_init(struct odm_dm_struct *dm_odm)
struct fast_ant_train *dm_fat_tbl = &dm_odm->DM_FatTable;
u32 AntCombination = 2;
- if (*(dm_odm->mp_mode) == 1) {
+ if (*(dm_odm->mp_mode) == 1)
return;
- }
for (i = 0; i < 6; i++) {
dm_fat_tbl->Bssid[i] = 0;
diff --git a/drivers/staging/rtl8188eu/hal/phy.c b/drivers/staging/rtl8188eu/hal/phy.c
index 3f663fe..0a1a7d6 100644
--- a/drivers/staging/rtl8188eu/hal/phy.c
+++ b/drivers/staging/rtl8188eu/hal/phy.c
@@ -991,9 +991,8 @@ static void save_adda_registers(struct adapter *adapt, u32 *addareg,
{
u32 i;
- for (i = 0; i < register_num; i++) {
+ for (i = 0; i < register_num; i++)
backup[i] = phy_query_bb_reg(adapt, addareg[i], bMaskDWord);
- }
}
static void save_mac_registers(struct adapter *adapt, u32 *mac_reg,
@@ -1001,9 +1000,8 @@ static void save_mac_registers(struct adapter *adapt, u32 *mac_reg,
{
u32 i;
- for (i = 0; i < (IQK_MAC_REG_NUM - 1); i++) {
+ for (i = 0; i < (IQK_MAC_REG_NUM - 1); i++)
backup[i] = usb_read8(adapt, mac_reg[i]);
- }
backup[i] = usb_read32(adapt, mac_reg[i]);
}
@@ -1021,9 +1019,8 @@ static void reload_mac_registers(struct adapter *adapt,
{
u32 i;
- for (i = 0; i < (IQK_MAC_REG_NUM - 1); i++) {
+ for (i = 0; i < (IQK_MAC_REG_NUM - 1); i++)
usb_write8(adapt, mac_reg[i], (u8)backup[i]);
- }
usb_write32(adapt, mac_reg[i], backup[i]);
}
@@ -1051,9 +1048,8 @@ static void mac_setting_calibration(struct adapter *adapt, u32 *mac_reg, u32 *ba
usb_write8(adapt, mac_reg[i], 0x3F);
- for (i = 1; i < (IQK_MAC_REG_NUM - 1); i++) {
+ for (i = 1; i < (IQK_MAC_REG_NUM - 1); i++)
usb_write8(adapt, mac_reg[i], (u8)(backup[i]&(~BIT3)));
- }
usb_write8(adapt, mac_reg[i], (u8)(backup[i]&(~BIT5)));
}
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
index 86347f2..cf2609f 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
@@ -104,15 +104,13 @@ static s32 FillH2CCmd_88E(struct adapter *adapt, u8 ElementID, u32 CmdLen, u8 *p
/* Write Ext command */
msgbox_ex_addr = REG_HMEBOX_EXT_0 + (h2c_box_num * RTL88E_EX_MESSAGE_BOX_SIZE);
- for (cmd_idx = 0; cmd_idx < ext_cmd_len; cmd_idx++) {
+ for (cmd_idx = 0; cmd_idx < ext_cmd_len; cmd_idx++)
usb_write8(adapt, msgbox_ex_addr+cmd_idx, *((u8 *)(&h2c_cmd_ex)+cmd_idx));
- }
}
/* Write command */
msgbox_addr = REG_HMEBOX_0 + (h2c_box_num * RTL88E_MESSAGE_BOX_SIZE);
- for (cmd_idx = 0; cmd_idx < RTL88E_MESSAGE_BOX_SIZE; cmd_idx++) {
+ for (cmd_idx = 0; cmd_idx < RTL88E_MESSAGE_BOX_SIZE; cmd_idx++)
usb_write8(adapt, msgbox_addr+cmd_idx, *((u8 *)(&h2c_cmd)+cmd_idx));
- }
bcmd_down = true;
haldata->LastHMEBoxNum = (h2c_box_num+1) % RTL88E_MAX_H2C_BOX_NUMS;
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
index 1aae302..c727a78 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
@@ -303,9 +303,8 @@ s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy)
/* Let last entry point to the start entry of ring buffer */
status = _LLTWrite(padapter, Last_Entry_Of_TxPktBuf, txpktbuf_bndy);
- if (_SUCCESS != status) {
+ if (_SUCCESS != status)
return status;
- }
}
return status;
diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index 0078468..5665a7d 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -716,9 +716,8 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)
/* Save target channel */
haldata->CurrentChannel = 6;/* default set to 6 */
- if (pwrctrlpriv->reg_rfoff) {
+ if (pwrctrlpriv->reg_rfoff)
pwrctrlpriv->rf_pwrstate = rf_off;
- }
/* 2010/08/09 MH We need to check if we need to turnon or off RF after detecting */
/* HW GPIO pin. Before PHY_RFConfig8192C. */
--
1.9.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
