Add new function ft1000_read_dsp_timer() replacing recurring code block for
reading DSP timer. Such code refactoring solves all remaining "line over 80
characters" warnings reported by checkpatch.pl.
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@xxxxxxxxx>
---
drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c | 197 +++++------------------
1 file changed, 39 insertions(+), 158 deletions(-)
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
index 4f165cb..538ec38f 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
@@ -302,6 +302,39 @@ static void ft1000_disable_interrupts(struct net_device *dev)
}
/*---------------------------------------------------------------------------
+ Function: ft1000_read_dsp_timer
+ Description: This function reads the DSP timer and stores its value in the
+ DSP_TIME field of the ft1000_info struct passed as argument
+ Input:
+ info - ft1000_info structure
+ Output:
+ None.
+
+ -------------------------------------------------------------------------*/
+static void ft1000_read_dsp_timer(struct ft1000_info *info)
+{
+ if (info->AsicID == ELECTRABUZZ_ID) {
+ info->DSP_TIME[0] = ft1000_read_dpram(dev, FT1000_DSP_TIMER0);
+ info->DSP_TIME[1] = ft1000_read_dpram(dev, FT1000_DSP_TIMER1);
+ info->DSP_TIME[2] = ft1000_read_dpram(dev, FT1000_DSP_TIMER2);
+ info->DSP_TIME[3] = ft1000_read_dpram(dev, FT1000_DSP_TIMER3);
+ } else {
+ info->DSP_TIME[0] =
+ ft1000_read_dpram_mag_16(dev, FT1000_MAG_DSP_TIMER0,
+ FT1000_MAG_DSP_TIMER0_INDX);
+ info->DSP_TIME[1] =
+ ft1000_read_dpram_mag_16(dev, FT1000_MAG_DSP_TIMER1,
+ FT1000_MAG_DSP_TIMER1_INDX);
+ info->DSP_TIME[2] =
+ ft1000_read_dpram_mag_16(dev, FT1000_MAG_DSP_TIMER2,
+ FT1000_MAG_DSP_TIMER2_INDX);
+ info->DSP_TIME[3] =
+ ft1000_read_dpram_mag_16(dev, FT1000_MAG_DSP_TIMER3,
+ FT1000_MAG_DSP_TIMER3_INDX);
+ }
+}
+
+/*---------------------------------------------------------------------------
Function: ft1000_reset_asic
Description: This function will call the Card Service function to reset the
@@ -579,33 +612,7 @@ static void ft1000_hbchk(u_long data)
}
if (tempword != ho) {
pr_info("heartbeat failed - no ho detected\n");
- if (info->AsicID == ELECTRABUZZ_ID) {
- info->DSP_TIME[0] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER0);
- info->DSP_TIME[1] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER1);
- info->DSP_TIME[2] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER2);
- info->DSP_TIME[3] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER3);
- } else {
- info->DSP_TIME[0] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER0,
- FT1000_MAG_DSP_TIMER0_INDX);
- info->DSP_TIME[1] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER1,
- FT1000_MAG_DSP_TIMER1_INDX);
- info->DSP_TIME[2] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER2,
- FT1000_MAG_DSP_TIMER2_INDX);
- info->DSP_TIME[3] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER3,
- FT1000_MAG_DSP_TIMER3_INDX);
- }
+ ft1000_read_dsp_timer(info);
info->DrvErrNum = DSP_HB_INFO;
if (ft1000_reset_card(dev) == 0) {
pr_info("Hardware Failure Detected - PC Card disabled\n");
@@ -625,33 +632,7 @@ static void ft1000_hbchk(u_long data)
tempword = ft1000_read_reg(dev, FT1000_REG_DOORBELL);
if (tempword & FT1000_DB_HB) {
pr_info("heartbeat doorbell not clear by firmware\n");
- if (info->AsicID == ELECTRABUZZ_ID) {
- info->DSP_TIME[0] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER0);
- info->DSP_TIME[1] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER1);
- info->DSP_TIME[2] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER2);
- info->DSP_TIME[3] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER3);
- } else {
- info->DSP_TIME[0] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER0,
- FT1000_MAG_DSP_TIMER0_INDX);
- info->DSP_TIME[1] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER1,
- FT1000_MAG_DSP_TIMER1_INDX);
- info->DSP_TIME[2] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER2,
- FT1000_MAG_DSP_TIMER2_INDX);
- info->DSP_TIME[3] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER3,
- FT1000_MAG_DSP_TIMER3_INDX);
- }
+ ft1000_read_dsp_timer(info);
info->DrvErrNum = DSP_HB_INFO;
if (ft1000_reset_card(dev) == 0) {
pr_info("Hardware Failure Detected - PC Card disabled\n");
@@ -701,33 +682,7 @@ static void ft1000_hbchk(u_long data)
if (tempword != hi) {
pr_info("heartbeat failed - cannot write hi into DPRAM\n");
- if (info->AsicID == ELECTRABUZZ_ID) {
- info->DSP_TIME[0] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER0);
- info->DSP_TIME[1] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER1);
- info->DSP_TIME[2] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER2);
- info->DSP_TIME[3] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER3);
- } else {
- info->DSP_TIME[0] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER0,
- FT1000_MAG_DSP_TIMER0_INDX);
- info->DSP_TIME[1] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER1,
- FT1000_MAG_DSP_TIMER1_INDX);
- info->DSP_TIME[2] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER2,
- FT1000_MAG_DSP_TIMER2_INDX);
- info->DSP_TIME[3] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER3,
- FT1000_MAG_DSP_TIMER3_INDX);
- }
+ ft1000_read_dsp_timer(info);
info->DrvErrNum = DSP_HB_INFO;
if (ft1000_reset_card(dev) == 0) {
pr_info("Hardware Failure Detected - PC Card disabled\n");
@@ -1314,29 +1269,7 @@ static int ft1000_parse_dpram_msg(struct net_device *dev)
if (doorbell & FT1000_DB_COND_RESET) {
/* Reset ASIC and DSP */
- if (info->AsicID == ELECTRABUZZ_ID) {
- info->DSP_TIME[0] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER0);
- info->DSP_TIME[1] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER1);
- info->DSP_TIME[2] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER2);
- info->DSP_TIME[3] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER3);
- } else {
- info->DSP_TIME[0] =
- ft1000_read_dpram_mag_16(dev, FT1000_MAG_DSP_TIMER0,
- FT1000_MAG_DSP_TIMER0_INDX);
- info->DSP_TIME[1] =
- ft1000_read_dpram_mag_16(dev, FT1000_MAG_DSP_TIMER1,
- FT1000_MAG_DSP_TIMER1_INDX);
- info->DSP_TIME[2] =
- ft1000_read_dpram_mag_16(dev, FT1000_MAG_DSP_TIMER2,
- FT1000_MAG_DSP_TIMER2_INDX);
- info->DSP_TIME[3] =
- ft1000_read_dpram_mag_16(dev, FT1000_MAG_DSP_TIMER3,
- FT1000_MAG_DSP_TIMER3_INDX);
- }
+ ft1000_read_dsp_timer(info);
info->DrvErrNum = DSP_CONDRESET_INFO;
pr_debug("DSP conditional reset requested\n");
ft1000_reset_card(dev);
@@ -1377,29 +1310,7 @@ static void ft1000_flush_fifo(struct net_device *dev, u16 DrvErrNum)
u16 tempword;
if (pcmcia->PktIntfErr > MAX_PH_ERR) {
- if (info->AsicID == ELECTRABUZZ_ID) {
- info->DSP_TIME[0] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER0);
- info->DSP_TIME[1] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER1);
- info->DSP_TIME[2] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER2);
- info->DSP_TIME[3] =
- ft1000_read_dpram(dev, FT1000_DSP_TIMER3);
- } else {
- info->DSP_TIME[0] =
- ft1000_read_dpram_mag_16(dev, FT1000_MAG_DSP_TIMER0,
- FT1000_MAG_DSP_TIMER0_INDX);
- info->DSP_TIME[1] =
- ft1000_read_dpram_mag_16(dev, FT1000_MAG_DSP_TIMER1,
- FT1000_MAG_DSP_TIMER1_INDX);
- info->DSP_TIME[2] =
- ft1000_read_dpram_mag_16(dev, FT1000_MAG_DSP_TIMER2,
- FT1000_MAG_DSP_TIMER2_INDX);
- info->DSP_TIME[3] =
- ft1000_read_dpram_mag_16(dev, FT1000_MAG_DSP_TIMER3,
- FT1000_MAG_DSP_TIMER3_INDX);
- }
+ ft1000_read_dsp_timer(info);
info->DrvErrNum = DrvErrNum;
ft1000_reset_card(dev);
return;
@@ -1424,37 +1335,7 @@ static void ft1000_flush_fifo(struct net_device *dev, u16 DrvErrNum)
* We must reset to recover.
*/
if ((i > 2048) || (tempword == 0)) {
- if (info->AsicID == ELECTRABUZZ_ID) {
- info->DSP_TIME[0] =
- ft1000_read_dpram(dev,
- FT1000_DSP_TIMER0);
- info->DSP_TIME[1] =
- ft1000_read_dpram(dev,
- FT1000_DSP_TIMER1);
- info->DSP_TIME[2] =
- ft1000_read_dpram(dev,
- FT1000_DSP_TIMER2);
- info->DSP_TIME[3] =
- ft1000_read_dpram(dev,
- FT1000_DSP_TIMER3);
- } else {
- info->DSP_TIME[0] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER0,
- FT1000_MAG_DSP_TIMER0_INDX);
- info->DSP_TIME[1] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER1,
- FT1000_MAG_DSP_TIMER1_INDX);
- info->DSP_TIME[2] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER2,
- FT1000_MAG_DSP_TIMER2_INDX);
- info->DSP_TIME[3] =
- ft1000_read_dpram_mag_16(dev,
- FT1000_MAG_DSP_TIMER3,
- FT1000_MAG_DSP_TIMER3_INDX);
- }
+ ft1000_read_dsp_timer(info);
if (tempword == 0) {
/*
* Let's check if ASIC reads are still ok by
--
1.8.3.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
