[PATCH v2 02/02] STAGING: Fix pcl818.c coding style issue: line over 80 characters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Correct one coding style problem(detected by checkpatch.pl) in pcl818.c.
- line over 80 characters

Signed-off-by: Simon Guo <wei.guo.simon@xxxxxxxxx>
---
 drivers/staging/comedi/drivers/pcl818.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index 5d9050c..2b8a05e 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -297,9 +297,11 @@ static const struct pcl818_board boardtypes[] = {
 
 struct pcl818_private {
 	struct comedi_isadma *dma;
-	unsigned int ns_min;	/*  manimal allowed delay between samples (in us) for actual card */
+	/*  manimal allowed delay between samples (in us) for actual card */
+	unsigned int ns_min;
 	int i8253_osc_base;	/*  1/frequency of on board oscilator in ns */
-	unsigned int act_chanlist[16];	/*  MUX setting for actual AI operations */
+	/*  MUX setting for actual AI operations */
+	unsigned int act_chanlist[16];
 	unsigned int act_chanlist_len;	/*  how long is actual MUX list */
 	unsigned int act_chanlist_pos;	/*  actual position in MUX list */
 	unsigned int divisor1;
@@ -641,7 +643,8 @@ static int check_channel_list(struct comedi_device *dev,
 				break;
 			nowmustbechan =
 			    (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
-			if (nowmustbechan != CR_CHAN(chanlist[i])) {	/*  channel list isn't continuous :-( */
+			if (nowmustbechan != CR_CHAN(chanlist[i])) {
+				/*  channel list isn't continuous :-( */
 				dev_dbg(dev->class_dev,
 					"channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n",
 					i, CR_CHAN(chanlist[i]), nowmustbechan,
@@ -1147,8 +1150,10 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	devpriv->ns_min = board->ns_min;
 
 	if (!board->is_818) {
-		if ((it->options[6] == 1) || (it->options[6] == 100))
-			devpriv->ns_min = 10000;	/* extended PCL718 to 100kHz DAC */
+		if ((it->options[6] == 1) || (it->options[6] == 100)) {
+			/* extended PCL718 to 100kHz DAC */
+			devpriv->ns_min = 10000;
+		}
 	}
 
 	pcl818_reset(dev);
-- 
1.8.1.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux