Use the usual block comment style. Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx> --- drivers/staging/comedi/drivers/8253.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/staging/comedi/drivers/8253.h b/drivers/staging/comedi/drivers/8253.h index 55f1704..0d9aec0 100644 --- a/drivers/staging/comedi/drivers/8253.h +++ b/drivers/staging/comedi/drivers/8253.h @@ -44,9 +44,11 @@ static inline void i8253_cascade_ns_to_timer(int i8253_osc_base, unsigned int start; unsigned int ns_low, ns_high; static const unsigned int max_count = 0x10000; - /* exit early if everything is already correct (this can save time + /* + * exit early if everything is already correct (this can save time * since this function may be called repeatedly during command tests - * and execution) */ + * and execution) + */ div1 = *d1 ? *d1 : max_count; div2 = *d2 ? *d2 : max_count; divider = div1 * div2; @@ -120,7 +122,8 @@ static inline void i8253_cascade_ns_to_timer(int i8253_osc_base, } #ifndef CMDTEST -/* i8254_load programs 8254 counter chip. It should also work for the 8253. +/* + * i8254_load programs 8254 counter chip. It should also work for the 8253. * base_address is the lowest io address * for the chip (the address of counter 0). * counter_number is the counter you want to load (0,1 or 2) @@ -274,7 +277,8 @@ static inline void i8254_mm_write(void __iomem *base_address, writeb(byte, base_address + (counter_number << regshift)); } -/* Set counter mode, should work for 8253 also. +/* + * Set counter mode, should work for 8253 also. * Note: the 'mode' value is different to that for i8254_load() and comes * from the INSN_CONFIG_8254_SET_MODE command: * I8254_MODE0, I8254_MODE1, ..., I8254_MODE5 -- 2.1.4 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
