Jake Oshins <jakeo@xxxxxxxxxxxxx> writes:
> Signed-off-by: Jake Oshins <jakeo@xxxxxxxxxxxxx>
> ---
> drivers/hv/vmbus_drv.c | 85 +++++++++++++++++++++++++++++++++--------
> drivers/video/fbdev/hyperv_fb.c | 2 +-
> include/linux/hyperv.h | 2 +-
> 3 files changed, 72 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
> index 4d6b269..ba5b7a1 100644
> --- a/drivers/hv/vmbus_drv.c
> +++ b/drivers/hv/vmbus_drv.c
> @@ -43,10 +43,7 @@ static struct tasklet_struct msg_dpc;
> static struct completion probe_event;
> static int irq;
>
> -struct resource hyperv_mmio = {
> - .name = "hyperv mmio",
> - .flags = IORESOURCE_MEM,
> -};
> +struct resource *hyperv_mmio;
> EXPORT_SYMBOL_GPL(hyperv_mmio);
>
> static int vmbus_exists(void)
> @@ -849,23 +846,74 @@ void vmbus_device_unregister(struct hv_device *device_obj)
>
> /*
> - * VMBUS is an acpi enumerated device. Get the the information we
> - * need from DSDT.
> + * VMBUS is an acpi enumerated device. Get the
> + * information we need from DSDT.
> */
>
> static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
> {
> + resource_size_t start = 0;
> + resource_size_t end = 0;
> + struct resource *new_res;
> + struct resource **old_res = &hyperv_mmio;
> +
> switch (res->type) {
> case ACPI_RESOURCE_TYPE_IRQ:
> irq = res->data.irq.interrupts[0];
> + return AE_OK;
> +
> + /*
> + * "Address" descriptors are for bus windows. Ignore
> + * "memory" descriptors, which are for registers on
> + * devices.
> + */
> + case ACPI_RESOURCE_TYPE_ADDRESS32:
> + start = res->data.address32.minimum;
> + end = res->data.address32.maximum;
> break;
>
> case ACPI_RESOURCE_TYPE_ADDRESS64:
> - hyperv_mmio.start = res->data.address64.minimum;
> - hyperv_mmio.end = res->data.address64.maximum;
> + start = res->data.address64.minimum;
> + end = res->data.address64.maximum;
> break;
> +
> + default:
> + /* Unused resource type */
> + return AE_OK;
> }
>
> + /*
> + * Ignore ranges that are below 1MB, as they're not
> + * necessary or useful here.
> + */
> + if (end < 0x100000)
> + return AE_OK;
> +
> + new_res = kzalloc(sizeof(*new_res), GFP_ATOMIC);
> + if (!new_res)
> + return AE_NO_MEMORY;
> +
> + new_res->name = "hyperv mmio";
> + new_res->flags = IORESOURCE_MEM;
> + new_res->start = start;
> + new_res->end = end;
> +
> + do {
> + if (!*old_res) {
> + *old_res = new_res;
> + break;
> + }
> +
> + if ((*old_res)->start > new_res->end) {
> + new_res->sibling = *old_res;
> + *old_res = new_res;
> + break;
> + }
> +
> + old_res = &(*old_res)->sibling;
> +
> + } while (1);
> +
> return AE_OK;
> }
>
> @@ -873,6 +921,7 @@ static int vmbus_acpi_add(struct acpi_device *device)
> {
> acpi_status result;
> int ret_val = -ENODEV;
> + struct acpi_device *ancestor;
>
> hv_acpi_dev = device;
>
> @@ -882,18 +931,22 @@ static int vmbus_acpi_add(struct acpi_device *device)
> if (ACPI_FAILURE(result))
> goto acpi_walk_err;
> /*
> - * The parent of the vmbus acpi device (Gen2 firmware) is the VMOD that
> - * has the mmio ranges. Get that.
> + * Some ancestor of the vmbus acpi device (Gen1 or Gen2
> + * firmware) is the VMOD that has the mmio ranges. Get that.
> */
> - if (device->parent) {
> - result = acpi_walk_resources(device->parent->handle,
> + for (ancestor = device->parent;
> + ancestor;
> + ancestor = ancestor->parent) {
> + result = acpi_walk_resources(ancestor->handle,
> METHOD_NAME__CRS,
> vmbus_walk_resources, NULL);
>
> if (ACPI_FAILURE(result))
> - goto acpi_walk_err;
> - if (hyperv_mmio.start && hyperv_mmio.end)
> - request_resource(&iomem_resource, &hyperv_mmio);
> + continue;
> + if (hyperv_mmio) {
> + request_resource(&iomem_resource, hyperv_mmio);
> + break;
> + }
> }
> ret_val = 0;
>
> @@ -962,6 +1015,8 @@ static void __exit vmbus_exit(void)
> hv_remove_vmbus_irq();
> vmbus_free_channels();
> bus_unregister(&hv_bus);
> + if (hyperv_mmio)
> + release_resource(hyperv_mmio);
I suggese we create a special release handler and register it within
acpi_driver.ops (the way I did it in https://lkml.org/lkml/2015/1/21/669
but now I'm going to drop it from my series as your patch is supposed to
solve the issue) instead as it naturally belongs there.
> hv_cleanup();
> acpi_bus_unregister_driver(&vmbus_acpi_driver);
> }
> diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
> index 4254336..003c8f0 100644
> --- a/drivers/video/fbdev/hyperv_fb.c
> +++ b/drivers/video/fbdev/hyperv_fb.c
> @@ -686,7 +686,7 @@ static int hvfb_getmem(struct fb_info *info)
> par->mem.name = KBUILD_MODNAME;
> par->mem.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
> if (gen2vm) {
> - ret = allocate_resource(&hyperv_mmio, &par->mem,
> + ret = allocate_resource(hyperv_mmio, &par->mem,
> screen_fb_size,
> 0, -1,
> screen_fb_size,
> diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
> index 476c685..8903689 100644
> --- a/include/linux/hyperv.h
> +++ b/include/linux/hyperv.h
> @@ -1178,7 +1178,7 @@ int hv_vss_init(struct hv_util_service *);
> void hv_vss_deinit(void);
> void hv_vss_onchannelcallback(void *);
>
> -extern struct resource hyperv_mmio;
> +extern struct resource *hyperv_mmio;
>
> /*
> * Negotiated version with the Host.
--
Vitaly
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
