[PATCH v2] staging: rts5208: use msecs_to_jiffies for timeouts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is only an API consolidation and should make things more readable

Signed-off-by: Nicholas Mc Guire <der.herr@xxxxxxx>
---

v2: typo in patch subject fixed - no change in actual patch

Converting milliseconds to jiffies by val * HZ / 1000 is technically
not wrong but msecs_to_jiffies(val) is the cleaner solution and handles
corner cases correctly.

This patch was only compile tested with x86_64_defconfig + CONFIG_STAGING=y, 
CONFIG_RTS5208=m

Patch is against 3.19.0-rc5 -next-20150122

 drivers/staging/rts5208/rtsx_transport.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/rts5208/rtsx_transport.c b/drivers/staging/rts5208/rtsx_transport.c
index 756a968..dab1995 100644
--- a/drivers/staging/rts5208/rtsx_transport.c
+++ b/drivers/staging/rts5208/rtsx_transport.c
@@ -271,7 +271,7 @@ int rtsx_send_cmd(struct rtsx_chip *chip, u8 card, int timeout)
 
 	/* Wait for TRANS_OK_INT */
 	timeleft = wait_for_completion_interruptible_timeout(
-		&trans_done, timeout * HZ / 1000);
+		&trans_done, msecs_to_jiffies(timeout));
 	if (timeleft <= 0) {
 		dev_dbg(rtsx_dev(chip), "chip->int_reg = 0x%x\n",
 			chip->int_reg);
@@ -431,7 +431,7 @@ static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card,
 	spin_unlock_irq(&rtsx->reg_lock);
 
 	timeleft = wait_for_completion_interruptible_timeout(
-		&trans_done, timeout * HZ / 1000);
+		&trans_done, msecs_to_jiffies(timeout));
 	if (timeleft <= 0) {
 		dev_dbg(rtsx_dev(chip), "Timeout (%s %d)\n",
 			__func__, __LINE__);
@@ -455,7 +455,7 @@ static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card,
 		init_completion(&trans_done);
 		spin_unlock_irq(&rtsx->reg_lock);
 		timeleft = wait_for_completion_interruptible_timeout(
-			&trans_done, timeout * HZ / 1000);
+			&trans_done, msecs_to_jiffies(timeout));
 		if (timeleft <= 0) {
 			dev_dbg(rtsx_dev(chip), "Timeout (%s %d)\n",
 				__func__, __LINE__);
@@ -575,7 +575,7 @@ static int rtsx_transfer_sglist_adma(struct rtsx_chip *chip, u8 card,
 		spin_unlock_irq(&rtsx->reg_lock);
 
 		timeleft = wait_for_completion_interruptible_timeout(
-			&trans_done, timeout * HZ / 1000);
+			&trans_done, msecs_to_jiffies(timeout));
 		if (timeleft <= 0) {
 			dev_dbg(rtsx_dev(chip), "Timeout (%s %d)\n",
 				__func__, __LINE__);
@@ -602,7 +602,7 @@ static int rtsx_transfer_sglist_adma(struct rtsx_chip *chip, u8 card,
 		init_completion(&trans_done);
 		spin_unlock_irq(&rtsx->reg_lock);
 		timeleft = wait_for_completion_interruptible_timeout(
-			&trans_done, timeout * HZ / 1000);
+			&trans_done, msecs_to_jiffies(timeout));
 		if (timeleft <= 0) {
 			dev_dbg(rtsx_dev(chip), "Timeout (%s %d)\n",
 				__func__, __LINE__);
@@ -688,7 +688,7 @@ static int rtsx_transfer_buf(struct rtsx_chip *chip, u8 card, void *buf,
 
 	/* Wait for TRANS_OK_INT */
 	timeleft = wait_for_completion_interruptible_timeout(
-		&trans_done, timeout * HZ / 1000);
+		&trans_done, msecs_to_jiffies(timeout));
 	if (timeleft <= 0) {
 		dev_dbg(rtsx_dev(chip), "Timeout (%s %d)\n",
 			__func__, __LINE__);
-- 
1.7.10.4

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux