From: Chris Rorvick <chris@xxxxxxxxxxx>
Including "BIT" in the macro name is pointless. Replace with "CAP" to
provide some context for what its value represents.
Signed-off-by: Chris Rorvick <chris@xxxxxxxxxxx>
Reviewed-by: Stefan Hajnoczi <stefanha@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/line6/driver.c | 8 ++++----
drivers/staging/line6/midi.c | 2 +-
drivers/staging/line6/pcm.c | 2 +-
drivers/staging/line6/playback.c | 2 +-
drivers/staging/line6/pod.c | 2 +-
drivers/staging/line6/usbdefs.h | 12 ++++++------
6 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/line6/driver.c b/drivers/staging/line6/driver.c
index acde205a62ba..4ec87a37ace4 100644
--- a/drivers/staging/line6/driver.c
+++ b/drivers/staging/line6/driver.c
@@ -59,7 +59,7 @@ MODULE_DEVICE_TABLE(usb, line6_id_table);
#define L6PROP(dev_id, dev_name, dev_cap)\
{.id = dev_id,\
- .name = dev_name, .capabilities = LINE6_BIT_##dev_cap}
+ .name = dev_name, .capabilities = LINE6_CAP_##dev_cap}
static const struct line6_properties line6_properties_table[] = {
L6PROP("BassPODxt", "BassPODxt", CTRL_PCM_HW),
@@ -830,7 +830,7 @@ static int line6_probe(struct usb_interface *interface,
usb_set_intfdata(interface, line6);
- if (properties->capabilities & LINE6_BIT_CONTROL) {
+ if (properties->capabilities & LINE6_CAP_CONTROL) {
/* initialize USB buffers: */
line6->buffer_listen =
kmalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL);
@@ -1052,7 +1052,7 @@ static int line6_suspend(struct usb_interface *interface, pm_message_t message)
snd_power_change_state(line6->card, SNDRV_CTL_POWER_D3hot);
- if (line6->properties->capabilities & LINE6_BIT_CONTROL)
+ if (line6->properties->capabilities & LINE6_CAP_CONTROL)
line6_stop_listen(line6);
if (line6pcm != NULL) {
@@ -1071,7 +1071,7 @@ static int line6_resume(struct usb_interface *interface)
{
struct usb_line6 *line6 = usb_get_intfdata(interface);
- if (line6->properties->capabilities & LINE6_BIT_CONTROL)
+ if (line6->properties->capabilities & LINE6_CAP_CONTROL)
line6_start_listen(line6);
snd_power_change_state(line6->card, SNDRV_CTL_POWER_D0);
diff --git a/drivers/staging/line6/midi.c b/drivers/staging/line6/midi.c
index 1ac343b649c1..c453485065a3 100644
--- a/drivers/staging/line6/midi.c
+++ b/drivers/staging/line6/midi.c
@@ -279,7 +279,7 @@ int line6_init_midi(struct usb_line6 *line6)
int err;
struct snd_line6_midi *line6midi;
- if (!(line6->properties->capabilities & LINE6_BIT_CONTROL)) {
+ if (!(line6->properties->capabilities & LINE6_CAP_CONTROL)) {
/* skip MIDI initialization and report success */
return 0;
}
diff --git a/drivers/staging/line6/pcm.c b/drivers/staging/line6/pcm.c
index 86c7bcba7ad6..e09772f609b8 100644
--- a/drivers/staging/line6/pcm.c
+++ b/drivers/staging/line6/pcm.c
@@ -424,7 +424,7 @@ int line6_init_pcm(struct usb_line6 *line6,
int ep_read = 0, ep_write = 0;
struct snd_line6_pcm *line6pcm;
- if (!(line6->properties->capabilities & LINE6_BIT_PCM))
+ if (!(line6->properties->capabilities & LINE6_CAP_PCM))
return 0; /* skip PCM initialization and report success */
/* initialize PCM subsystem based on device: */
diff --git a/drivers/staging/line6/playback.c b/drivers/staging/line6/playback.c
index 2ca8900e68c3..54b7f60624f8 100644
--- a/drivers/staging/line6/playback.c
+++ b/drivers/staging/line6/playback.c
@@ -261,7 +261,7 @@ static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
#endif
if (!
(line6pcm->line6->
- properties->capabilities & LINE6_BIT_HWMON)
+ properties->capabilities & LINE6_CAP_HWMON)
&& (line6pcm->flags & LINE6_BITS_PLAYBACK_STREAM)
&& (line6pcm->flags & LINE6_BITS_CAPTURE_STREAM))
add_monitor_signal(urb_out, line6pcm->prev_fbuf,
diff --git a/drivers/staging/line6/pod.c b/drivers/staging/line6/pod.c
index 7b4ec92fe020..0fb178848182 100644
--- a/drivers/staging/line6/pod.c
+++ b/drivers/staging/line6/pod.c
@@ -396,7 +396,7 @@ static int pod_try_init(struct usb_interface *interface,
handler.
*/
- if (pod->line6.properties->capabilities & LINE6_BIT_CONTROL) {
+ if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
pod->monitor_level = POD_SYSTEM_INVALID;
/* initiate startup procedure: */
diff --git a/drivers/staging/line6/usbdefs.h b/drivers/staging/line6/usbdefs.h
index c897dba67a3b..d6e46ee8fa02 100644
--- a/drivers/staging/line6/usbdefs.h
+++ b/drivers/staging/line6/usbdefs.h
@@ -15,15 +15,15 @@
#define USB_INTERVALS_PER_SECOND 1000
/* device supports settings parameter via USB */
-#define LINE6_BIT_CONTROL (1 << 0)
+#define LINE6_CAP_CONTROL (1 << 0)
/* device supports PCM input/output via USB */
-#define LINE6_BIT_PCM (1 << 1)
+#define LINE6_CAP_PCM (1 << 1)
/* device support hardware monitoring */
-#define LINE6_BIT_HWMON (1 << 2)
+#define LINE6_CAP_HWMON (1 << 2)
-#define LINE6_BIT_CTRL_PCM_HW (LINE6_BIT_CONTROL | \
- LINE6_BIT_PCM | \
- LINE6_BIT_HWMON)
+#define LINE6_CAP_CTRL_PCM_HW (LINE6_CAP_CONTROL | \
+ LINE6_CAP_PCM | \
+ LINE6_CAP_HWMON)
#define LINE6_FALLBACK_INTERVAL 10
#define LINE6_FALLBACK_MAXPACKETSIZE 16
--
2.2.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
