Currently this function always transfers the full DMA buffer to the comedi
async buffer. When the cmd->stop_src == TRIG_COUNT the last DMA transfer
might be smaller than the buffer size. This results in invalid data being
added to the asunc buffer.
Add a 'size' member to the DMA descriptor and initialize it with the
actual size of the DMA transfer. Use that in pcl818_handle_dma() to
return the proper number of samples. Use the comedi_bytes_to_samples()
helper to convert the byte size to comedi samples. Remove the unnecessary
'bufptr' local variable.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/pcl818.c | 34 ++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index 3656ecf..19f6b59 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -305,6 +305,7 @@ static const struct pcl818_board boardtypes[] = {
struct pcl818_dma_desc {
void *virt_addr; /* virtual address of DMA buffer */
dma_addr_t hw_addr; /* hardware (bus) address of DMA buffer */
+ unsigned int size; /* transfer size (in bytes) */
};
struct pcl818_private {
@@ -349,17 +350,17 @@ static void pcl818_ai_setup_dma(struct comedi_device *dev,
struct pcl818_dma_desc *dma = &devpriv->dma_desc[0];
struct comedi_cmd *cmd = &s->async->cmd;
unsigned int flags;
- unsigned int bytes;
disable_dma(devpriv->dma); /* disable dma */
- bytes = devpriv->hwdmasize;
if (cmd->stop_src == TRIG_COUNT) {
- bytes = cmd->stop_arg * comedi_bytes_per_scan(s);
- devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize;
- devpriv->last_dma_run = bytes % devpriv->hwdmasize;
+ dma->size = cmd->stop_arg * comedi_bytes_per_scan(s);
+ devpriv->dma_runs_to_end = dma->size / devpriv->hwdmasize;
+ devpriv->last_dma_run = dma->size % devpriv->hwdmasize;
devpriv->dma_runs_to_end--;
if (devpriv->dma_runs_to_end >= 0)
- bytes = devpriv->hwdmasize;
+ dma->size = devpriv->hwdmasize;
+ } else {
+ dma->size = devpriv->hwdmasize;
}
devpriv->cur_dma = 0;
@@ -367,7 +368,7 @@ static void pcl818_ai_setup_dma(struct comedi_device *dev,
flags = claim_dma_lock();
clear_dma_ff(devpriv->dma);
set_dma_addr(devpriv->dma, dma->hw_addr);
- set_dma_count(devpriv->dma, bytes);
+ set_dma_count(devpriv->dma, dma->size);
release_dma_lock(flags);
enable_dma(devpriv->dma);
}
@@ -385,13 +386,14 @@ static void pcl818_ai_setup_next_dma(struct comedi_device *dev,
if (devpriv->dma_runs_to_end > -1 || cmd->stop_src == TRIG_NONE) {
/* switch dma bufs */
dma = &devpriv->dma_desc[devpriv->cur_dma];
+ if (devpriv->dma_runs_to_end || cmd->stop_src == TRIG_NONE)
+ dma->size = devpriv->hwdmasize;
+ else
+ dma->size = devpriv->last_dma_run;
set_dma_mode(devpriv->dma, DMA_MODE_READ);
flags = claim_dma_lock();
set_dma_addr(devpriv->dma, dma->hw_addr);
- if (devpriv->dma_runs_to_end || cmd->stop_src == TRIG_NONE)
- set_dma_count(devpriv->dma, devpriv->hwdmasize);
- else
- set_dma_count(devpriv->dma, devpriv->last_dma_run);
+ set_dma_count(devpriv->dma, dma->size);
release_dma_lock(flags);
enable_dma(devpriv->dma);
}
@@ -565,17 +567,15 @@ static void pcl818_handle_dma(struct comedi_device *dev,
struct pcl818_private *devpriv = dev->private;
struct pcl818_dma_desc *dma = &devpriv->dma_desc[devpriv->cur_dma];
unsigned short *ptr = dma->virt_addr;
+ unsigned int nsamples = comedi_bytes_to_samples(s, dma->size);
unsigned int chan;
unsigned int val;
- int i, len, bufptr;
+ int i;
pcl818_ai_setup_next_dma(dev, s);
- len = devpriv->hwdmasize >> 1;
- bufptr = 0;
-
- for (i = 0; i < len; i++) {
- val = ptr[bufptr++];
+ for (i = 0; i < nsamples; i++) {
+ val = ptr[i];
chan = val & 0xf;
val = (val >> 4) & s->maxdata;
--
2.0.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
