Signed-off-by: Helene Gsaenger <helene.gsaenger@xxxxxxxxxxxxxx> Signed-off-by: Simone Weiss <simone.weiss@xxxxxx> --- drivers/staging/iio/accel/adis16203.h | 41 ++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 10 deletions(-) diff --git a/drivers/staging/iio/accel/adis16203.h b/drivers/staging/iio/accel/adis16203.h index acc688d..fefe2f9 100644 --- a/drivers/staging/iio/accel/adis16203.h +++ b/drivers/staging/iio/accel/adis16203.h @@ -16,26 +16,47 @@ #define ADIS16203_ALM_SMPL2 0x26 /* Alarm 2, sample period */ #define ADIS16203_ALM_CTRL 0x28 /* Alarm control */ #define ADIS16203_AUX_DAC 0x30 /* Auxiliary DAC data */ -#define ADIS16203_GPIO_CTRL 0x32 /* General-purpose digital input/output control */ +#define ADIS16203_GPIO_CTRL 0x32 /* General-purpose digital input/output + * control */ #define ADIS16203_MSC_CTRL 0x34 /* Miscellaneous control */ -#define ADIS16203_SMPL_PRD 0x36 /* Internal sample period (rate) control */ +#define ADIS16203_SMPL_PRD 0x36 /* Internal sample period (rate) + * control */ #define ADIS16203_AVG_CNT 0x38 /* Operation, filter configuration */ #define ADIS16203_SLP_CNT 0x3A /* Operation, sleep mode control */ #define ADIS16203_DIAG_STAT 0x3C /* Diagnostics, system status register */ #define ADIS16203_GLOB_CMD 0x3E /* Operation, system command register */ /* MSC_CTRL */ -#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST (1 << 10) /* Self-test at power-on: 1 = disabled, 0 = enabled */ -#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN (1 << 9) /* Reverses rotation of both inclination outputs */ +#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST (1 << 10) /* Self-test at + * power-on: + * 1 = disabled, + * 0 = enabled */ +#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN (1 << 9) /* Reverses rotation + * of both + * inclination + * outputs */ #define ADIS16203_MSC_CTRL_SELF_TEST_EN (1 << 8) /* Self-test enable */ -#define ADIS16203_MSC_CTRL_DATA_RDY_EN (1 << 2) /* Data-ready enable: 1 = enabled, 0 = disabled */ -#define ADIS16203_MSC_CTRL_ACTIVE_HIGH (1 << 1) /* Data-ready polarity: 1 = active high, 0 = active low */ -#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 (1 << 0) /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */ +#define ADIS16203_MSC_CTRL_DATA_RDY_EN (1 << 2) /* Data-ready enable: + * 1 = enabled, + * 0 = disabled */ +#define ADIS16203_MSC_CTRL_ACTIVE_HIGH (1 << 1) /* Data-ready + * polarity: + * 1 = active high, + * 0 = active low */ +#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 (1 << 0) /* Data-ready line + * selection: + * 1 = DIO1, + * 0 = DIO0 */ /* DIAG_STAT */ -#define ADIS16203_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16203_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag */ +#define ADIS16203_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: + * 1 = alarm active, + * 0 = alarm inactive */ +#define ADIS16203_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: + * 1 = alarm active, + * 0 = alarm inactive */ +#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error + * flag */ #define ADIS16203_DIAG_STAT_SPI_FAIL_BIT 3 /* SPI communications failure */ #define ADIS16203_DIAG_STAT_FLASH_UPT_BIT 2 /* Flash update failure */ #define ADIS16203_DIAG_STAT_POWER_HIGH_BIT 1 /* Power supply above 3.625 V */ -- 1.9.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
