Sage,
On Sat, Dec 20, 2014 at 09:01:54PM -0500, Sage Vaillancourt wrote:
> Patch to the ni_stc.h file that removes spaces before tabs, and adds blank lines
> after declarations.
> Signed-off-by: Sage Vaillancourt <sagev9000@xxxxxxxxx>
Format your log message so it is no more than 80 characters wide (I like
72) and remove the gratuitous spacing on the second line.
Put a blank line between your log message and your Signed-off-by:
This patch is doing two things: adding blank lines and fixing
spaces/tabs in a line. Break it up in to two patches.
> ---
> drivers/staging/comedi/drivers/ni_stc.h | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/staging/comedi/drivers/ni_stc.h b/drivers/staging/comedi/drivers/ni_stc.h
> index bd69c3f..3b8b3c5 100644
> --- a/drivers/staging/comedi/drivers/ni_stc.h
> +++ b/drivers/staging/comedi/drivers/ni_stc.h
> @@ -166,7 +166,7 @@ enum Interrupt_B_Ack_Bits {
> #define AI_SCAN_IN_PROG_Pulse _bit4
> #define AI_EXTMUX_CLK_Pulse _bit3
> #define AI_LOCALMUX_CLK_Pulse _bit2
> -#define AI_SC_TC_Pulse _bit1
> +#define AI_SC_TC_Pulse _bit1
> #define AI_CONVERT_Pulse _bit0
>
> #define AO_Command_1_Register 9
> @@ -326,6 +326,7 @@ static inline unsigned RTSI_Output_Bit(unsigned channel, int is_mseries)
> {
> unsigned max_channel;
> unsigned base_bit_shift;
> +
> if (is_mseries) {
> base_bit_shift = 8;
> max_channel = 7;
> @@ -642,7 +643,7 @@ static unsigned AO_UPDATE_Output_Select(enum ao_update_output_selection
> #define G_Load_Source_Select _bit7
> #define G_Reload_Source_Switching _bit15
> #define G_Loading_On_Gate _bit14
> -#define G_Gate_Polarity _bit13
> +#define G_Gate_Polarity _bit13
>
> #define G_Counting_Once(a) (((a)&0x03)<<10)
> #define G_Stop_Mode(a) (((a)&0x03)<<5)
> @@ -1142,6 +1143,7 @@ static inline unsigned MSeries_AI_Config_Bank_Bits(enum ni_reg_type reg_type,
> unsigned channel)
> {
> unsigned bits = channel & 0x30;
> +
> if (reg_type == ni_reg_622x) {
> if (channel & 0x40)
> bits |= 0x400;
> @@ -1191,6 +1193,7 @@ enum MSeries_PLL_Control_Bits {
> static inline unsigned MSeries_PLL_Divisor_Bits(unsigned divisor)
> {
> static const unsigned max_divisor = 0x10;
> +
> if (divisor < 1 || divisor > max_divisor) {
> pr_err("%s: bug, invalid divisor=%i\n", __func__, divisor);
> return 0;
> @@ -1201,6 +1204,7 @@ static inline unsigned MSeries_PLL_Divisor_Bits(unsigned divisor)
> static inline unsigned MSeries_PLL_Multiplier_Bits(unsigned multiplier)
> {
> static const unsigned max_multiplier = 0x100;
> +
> if (multiplier < 1 || multiplier > max_multiplier) {
> pr_err("%s: bug, invalid multiplier=%i\n", __func__,
> multiplier);
> --
> 2.2.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
- Jeremiah Mahler
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
