[PATCH] Staging: dgnc: Fix long line coding style issues in dgnc_cls.h

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A patch to fix the rest of the long line warnings in the dgnc_cls.h file
found by the checkpatch.pl tool

Signed-off-by: Sean Cleator <seancleator@xxxxxxxxxxxxx>

---
 drivers/staging/dgnc/dgnc_cls.h | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/dgnc/dgnc_cls.h b/drivers/staging/dgnc/dgnc_cls.h
index 465d79a..32034e4 100644
--- a/drivers/staging/dgnc/dgnc_cls.h
+++ b/drivers/staging/dgnc/dgnc_cls.h
@@ -38,7 +38,10 @@
 struct cls_uart_struct {
 	u8 txrx;		/* WR  RHR/THR - Holding Reg */
 	u8 ier;		/* WR  IER - Interrupt Enable Reg */
-	u8 isr_fcr;		/* WR  ISR/FCR - Interrupt Status Reg/Fifo Control Reg */
+	u8 isr_fcr;		/*
+				 * WR  ISR/FCR - Interrupt Status Reg/Fifo
+				 * Control Reg
+				 */
 	u8 lcr;		/* WR  LCR - Line Control Reg */
 	u8 mcr;		/* WR  MCR - Modem Control Reg */
 	u8 lsr;		/* WR  LSR - Line Status Reg */
@@ -61,8 +64,11 @@ struct cls_uart_struct {
 #define UART_16654_FCR_RXTRIGGER_56	0x80
 #define UART_16654_FCR_RXTRIGGER_60     0xC0
 
-#define UART_IIR_CTSRTS			0x20	/* Received CTS/RTS change of state */
-#define UART_IIR_RDI_TIMEOUT		0x0C    /* Receiver data TIMEOUT */
+#define UART_IIR_CTSRTS			0x20	/*
+						 *  Received CTS/RTS change of
+						 *  state
+						 */
+#define UART_IIR_RDI_TIMEOUT		0x0C	/* Receiver data TIMEOUT */
 
 /*
  * These are the EXTENDED definitions for the Exar 654's Interrupt
@@ -74,8 +80,14 @@ struct cls_uart_struct {
 #define UART_EXAR654_EFR_RTSDTR   0x40    /* Auto RTS/DTR Flow Control Enable */
 #define UART_EXAR654_EFR_CTSDSR   0x80    /* Auto CTS/DSR Flow COntrol Enable */
 
-#define UART_EXAR654_XOFF_DETECT  0x1     /* Indicates whether chip saw an incoming XOFF char  */
-#define UART_EXAR654_XON_DETECT   0x2     /* Indicates whether chip saw an incoming XON char */
+#define UART_EXAR654_XOFF_DETECT  0x1     /*
+					   * Indicates whether chip saw an
+					   * incoming XOFF char
+					   */
+#define UART_EXAR654_XON_DETECT   0x2     /*
+					   * Indicates whether chip saw an
+					   * incoming XON char
+					   */
 
 #define UART_EXAR654_IER_XOFF     0x20    /* Xoff Interrupt Enable */
 #define UART_EXAR654_IER_RTSDTR   0x40    /* Output Interrupt Enable */
-- 
2.1.3

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux