From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
drivers/staging/rtl8723au/hal/rtl8723a_rf6052.c | 229 +++++++++++++-----------
1 file changed, 123 insertions(+), 106 deletions(-)
diff --git a/drivers/staging/rtl8723au/hal/rtl8723a_rf6052.c b/drivers/staging/rtl8723au/hal/rtl8723a_rf6052.c
index 2dc0886..1aad438 100644
--- a/drivers/staging/rtl8723au/hal/rtl8723a_rf6052.c
+++ b/drivers/staging/rtl8723au/hal/rtl8723a_rf6052.c
@@ -42,21 +42,6 @@
#include <rtl8723a_hal.h>
#include <usb_ops_linux.h>
-/*---------------------------Define Local Constant---------------------------*/
-/* Define local structure for debug!!!!! */
-struct rf_shadow_compare_map {
- /* Shadow register value */
- u32 Value;
- /* Compare or not flag */
- u8 Compare;
- /* Record If it had ever modified unpredicted */
- u8 ErrorOrNot;
- /* Recorver Flag */
- u8 Recorver;
- /* */
- u8 Driver_Write;
-};
-
/*-----------------------------------------------------------------------------
* Function: PHY_RF6052SetBandwidth()
*
@@ -71,20 +56,23 @@ struct rf_shadow_compare_map {
*
* Note: For RF type 0222D
*---------------------------------------------------------------------------*/
-void rtl8723a_phy_rf6052set_bw(
- struct rtw_adapter *Adapter,
- enum ht_channel_width Bandwidth) /* 20M or 40M */
+void rtl8723a_phy_rf6052set_bw(struct rtw_adapter *Adapter,
+ enum ht_channel_width Bandwidth) /* 20M or 40M */
{
- struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
+ struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
switch (Bandwidth) {
case HT_CHANNEL_WIDTH_20:
- pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff3ff) | 0x0400);
- PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]);
+ pHalData->RfRegChnlVal[0] =
+ (pHalData->RfRegChnlVal[0] & 0xfffff3ff) | 0x0400;
+ PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask,
+ pHalData->RfRegChnlVal[0]);
break;
case HT_CHANNEL_WIDTH_40:
- pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff3ff));
- PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]);
+ pHalData->RfRegChnlVal[0] =
+ (pHalData->RfRegChnlVal[0] & 0xfffff3ff);
+ PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask,
+ pHalData->RfRegChnlVal[0]);
break;
default:
break;
@@ -108,7 +96,8 @@ void rtl8723a_phy_rf6052set_bw(
*
*---------------------------------------------------------------------------*/
-void rtl823a_phy_rf6052setccktxpower(struct rtw_adapter *Adapter, u8 *pPowerlevel)
+void rtl823a_phy_rf6052setccktxpower(struct rtw_adapter *Adapter,
+ u8 *pPowerlevel)
{
struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
struct dm_priv *pdmpriv = &pHalData->dmpriv;
@@ -118,7 +107,8 @@ void rtl823a_phy_rf6052setccktxpower(struct rtw_adapter *Adapter, u8 *pPowerleve
u8 idx1, idx2;
u8 *ptr;
- /* According to SD3 eechou's suggestion, we need to disable turbo scan for RU. */
+ /* According to SD3 eechou's suggestion, we need to disable
+ turbo scan for RU. */
/* Otherwise, external PA will be broken if power index > 0x20. */
if (pHalData->EEPROMRegulatory != 0 || pHalData->ExternalPA)
TurboScanOff = true;
@@ -131,29 +121,37 @@ void rtl823a_phy_rf6052setccktxpower(struct rtw_adapter *Adapter, u8 *pPowerleve
if (TurboScanOff) {
for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
- TxAGC[idx1] =
- pPowerlevel[idx1] | (pPowerlevel[idx1]<<8) |
- (pPowerlevel[idx1]<<16) | (pPowerlevel[idx1]<<24);
- /* 2010/10/18 MH For external PA module. We need to limit power index to be less than 0x20. */
+ TxAGC[idx1] = pPowerlevel[idx1] |
+ (pPowerlevel[idx1] << 8) |
+ (pPowerlevel[idx1] << 16) |
+ (pPowerlevel[idx1] << 24);
+ /* 2010/10/18 MH For external PA module.
+ We need to limit power index to be less
+ than 0x20. */
if (TxAGC[idx1] > 0x20 && pHalData->ExternalPA)
TxAGC[idx1] = 0x20;
}
}
} else {
-/* 20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It shall be determined by power training mechanism. */
-/* Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism. */
-/* In the future, two mechanism shall be separated from each other and maintained independantly. Thanks for Lanhsin's reminder. */
+/* 20100427 Joseph: Driver dynamic Tx power shall not affect Tx
+ * power. It shall be determined by power training mechanism. */
+/* Currently, we cannot fully disable driver dynamic tx power
+ * mechanism because it is referenced by BT coexist mechanism. */
+/* In the future, two mechanism shall be separated from each other
+ * and maintained independantly. Thanks for Lanhsin's reminder. */
if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) {
TxAGC[RF_PATH_A] = 0x10101010;
TxAGC[RF_PATH_B] = 0x10101010;
- } else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2) {
+ } else if (pdmpriv->DynamicTxHighPowerLvl ==
+ TxHighPwrLevel_Level2) {
TxAGC[RF_PATH_A] = 0x00000000;
TxAGC[RF_PATH_B] = 0x00000000;
} else {
for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
- TxAGC[idx1] =
- pPowerlevel[idx1] | (pPowerlevel[idx1]<<8) |
- (pPowerlevel[idx1]<<16) | (pPowerlevel[idx1]<<24);
+ TxAGC[idx1] = pPowerlevel[idx1] |
+ (pPowerlevel[idx1] << 8) |
+ (pPowerlevel[idx1] << 16) |
+ (pPowerlevel[idx1] << 24);
}
if (pHalData->EEPROMRegulatory == 0) {
@@ -178,29 +176,24 @@ void rtl823a_phy_rf6052setccktxpower(struct rtw_adapter *Adapter, u8 *pPowerleve
}
/* rf-A cck tx power */
- tmpval = TxAGC[RF_PATH_A]&0xff;
+ tmpval = TxAGC[RF_PATH_A] & 0xff;
PHY_SetBBReg(Adapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, tmpval);
- tmpval = TxAGC[RF_PATH_A]>>8;
+ tmpval = TxAGC[RF_PATH_A] >> 8;
PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
/* rf-B cck tx power */
- tmpval = TxAGC[RF_PATH_B]>>24;
+ tmpval = TxAGC[RF_PATH_B] >> 24;
PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, tmpval);
- tmpval = TxAGC[RF_PATH_B]&0x00ffffff;
+ tmpval = TxAGC[RF_PATH_B] & 0x00ffffff;
PHY_SetBBReg(Adapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval);
} /* PHY_RF6052SetCckTxPower */
/* powerbase0 for OFDM rates */
/* powerbase1 for HT MCS rates */
-static void getPowerBase(
- struct rtw_adapter *Adapter,
- u8 *pPowerLevel,
- u8 Channel,
- u32 *OfdmBase,
- u32 *MCSBase
- )
+static void getPowerBase(struct rtw_adapter *Adapter, u8 *pPowerLevel,
+ u8 Channel, u32 *OfdmBase, u32 *MCSBase)
{
- struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
+ struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
u32 powerBase0, powerBase1;
u8 Legacy_pwrdiff = 0;
s8 HT20_pwrdiff = 0;
@@ -211,8 +204,9 @@ static void getPowerBase(
Legacy_pwrdiff = pHalData->TxPwrLegacyHtDiff[i][Channel-1];
powerBase0 = powerlevel[i] + Legacy_pwrdiff;
- powerBase0 = (powerBase0<<24) | (powerBase0<<16) | (powerBase0<<8) | powerBase0;
- *(OfdmBase+i) = powerBase0;
+ powerBase0 = powerBase0 << 24 | powerBase0 << 16 |
+ powerBase0 << 8 | powerBase0;
+ *(OfdmBase + i) = powerBase0;
}
for (i = 0; i < 2; i++) {
@@ -222,36 +216,35 @@ static void getPowerBase(
powerlevel[i] += HT20_pwrdiff;
}
powerBase1 = powerlevel[i];
- powerBase1 = (powerBase1<<24) | (powerBase1<<16) | (powerBase1<<8) | powerBase1;
- *(MCSBase+i) = powerBase1;
+ powerBase1 = powerBase1 << 24 | powerBase1 << 16 |
+ powerBase1 << 8 | powerBase1;
+ *(MCSBase + i) = powerBase1;
}
}
-static void getTxPowerWriteValByRegulatory(
- struct rtw_adapter *Adapter,
- u8 Channel,
- u8 index,
- u32 *powerBase0,
- u32 *powerBase1,
- u32 *pOutWriteVal
- )
+static void
+getTxPowerWriteValByRegulatory(struct rtw_adapter *Adapter, u8 Channel,
+ u8 index, u32 *powerBase0, u32 *powerBase1,
+ u32 *pOutWriteVal)
{
- struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
+ struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
struct dm_priv *pdmpriv = &pHalData->dmpriv;
- u8 i, chnlGroup = 0, pwr_diff_limit[4];
- u32 writeVal, customer_limit, rf;
+ u8 i, chnlGroup = 0, pwr_diff_limit[4];
+ u32 writeVal, customer_limit, rf;
/* Index 0 & 1 = legacy OFDM, 2-5 = HT_MCS rate */
for (rf = 0; rf < 2; rf++) {
switch (pHalData->EEPROMRegulatory) {
case 0: /* Realtek better performance */
- /* increase power diff defined by Realtek for large power */
+ /* increase power diff defined by Realtek for
+ * large power */
chnlGroup = 0;
writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)] +
((index < 2) ? powerBase0[rf] : powerBase1[rf]);
break;
case 1: /* Realtek regulatory */
- /* increase power diff defined by Realtek for regulatory */
+ /* increase power diff defined by Realtek for
+ * regulatory */
if (pHalData->pwrGroupCnt == 1)
chnlGroup = 0;
if (pHalData->pwrGroupCnt >= 3) {
@@ -262,17 +255,20 @@ static void getTxPowerWriteValByRegulatory(
else if (Channel > 9)
chnlGroup = 2;
- if (pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
+ if (pHalData->CurrentChannelBW ==
+ HT_CHANNEL_WIDTH_20)
chnlGroup++;
else
chnlGroup += 4;
}
writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)] +
- ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+ ((index < 2) ? powerBase0[rf] :
+ powerBase1[rf]);
break;
case 2: /* Better regulatory */
- /* don't increase any power diff */
- writeVal = ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+ /* don't increase any power diff */
+ writeVal = ((index < 2) ? powerBase0[rf] :
+ powerBase1[rf]);
break;
case 3: /* Customer defined power diff. */
chnlGroup = 0;
@@ -299,28 +295,34 @@ static void getTxPowerWriteValByRegulatory(
break;
}
-/* 20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It shall be determined by power training mechanism. */
-/* Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism. */
-/* In the future, two mechanism shall be separated from each other and maintained independantly. Thanks for Lanhsin's reminder. */
+/* 20100427 Joseph: Driver dynamic Tx power shall not affect Tx power.
+ It shall be determined by power training mechanism. */
+/* Currently, we cannot fully disable driver dynamic tx power mechanism
+ because it is referenced by BT coexist mechanism. */
+/* In the future, two mechanism shall be separated from each other and
+ maintained independantly. Thanks for Lanhsin's reminder. */
if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1)
writeVal = 0x14141414;
- else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2)
+ else if (pdmpriv->DynamicTxHighPowerLvl ==
+ TxHighPwrLevel_Level2)
writeVal = 0x00000000;
- /* 20100628 Joseph: High power mode for BT-Coexist mechanism. */
- /* This mechanism is only applied when Driver-Highpower-Mechanism is OFF. */
+ /* 20100628 Joseph: High power mode for BT-Coexist mechanism. */
+ /* This mechanism is only applied when
+ Driver-Highpower-Mechanism is OFF. */
if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_BT1)
writeVal = writeVal - 0x06060606;
else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_BT2)
writeVal = writeVal;
- *(pOutWriteVal+rf) = writeVal;
+ *(pOutWriteVal + rf) = writeVal;
}
}
-static void writeOFDMPowerReg(struct rtw_adapter *Adapter, u8 index, u32 *pValue)
+static void writeOFDMPowerReg(struct rtw_adapter *Adapter, u8 index,
+ u32 *pValue)
{
- struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
+ struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
u16 RegOffset_A[6] = {
rTxAGC_A_Rate18_06, rTxAGC_A_Rate54_24,
rTxAGC_A_Mcs03_Mcs00, rTxAGC_A_Mcs07_Mcs04,
@@ -338,12 +340,13 @@ static void writeOFDMPowerReg(struct rtw_adapter *Adapter, u8 index, u32 *pValue
for (rf = 0; rf < 2; rf++) {
writeVal = pValue[rf];
for (i = 0; i < 4; i++) {
- pwr_val[i] = (u8)((writeVal & (0x7f<<(i*8)))>>(i*8));
- if (pwr_val[i] > RF6052_MAX_TX_PWR)
+ pwr_val[i] = (u8)((writeVal &
+ (0x7f << (i * 8))) >> (i * 8));
+ if (pwr_val[i] > RF6052_MAX_TX_PWR)
pwr_val[i] = RF6052_MAX_TX_PWR;
}
- writeVal = (pwr_val[3]<<24) | (pwr_val[2]<<16) |
- (pwr_val[1]<<8) | pwr_val[0];
+ writeVal = pwr_val[3] << 24 | pwr_val[2] << 16 |
+ pwr_val[1] << 8 | pwr_val[0];
if (rf == 0)
RegOffset = RegOffset_A[index];
@@ -352,7 +355,8 @@ static void writeOFDMPowerReg(struct rtw_adapter *Adapter, u8 index, u32 *pValue
PHY_SetBBReg(Adapter, RegOffset, bMaskDWord, writeVal);
- /* 201005115 Joseph: Set Tx Power diff for Tx power training mechanism. */
+ /* 201005115 Joseph: Set Tx Power diff for Tx power
+ training mechanism. */
if (((pHalData->rf_type == RF_2T2R) &&
(RegOffset == rTxAGC_A_Mcs15_Mcs12 ||
RegOffset == rTxAGC_B_Mcs15_Mcs12)) ||
@@ -360,15 +364,19 @@ static void writeOFDMPowerReg(struct rtw_adapter *Adapter, u8 index, u32 *pValue
(RegOffset == rTxAGC_A_Mcs07_Mcs04 ||
RegOffset == rTxAGC_B_Mcs07_Mcs04))) {
writeVal = pwr_val[3];
- if (RegOffset == rTxAGC_A_Mcs15_Mcs12 || RegOffset == rTxAGC_A_Mcs07_Mcs04)
+ if (RegOffset == rTxAGC_A_Mcs15_Mcs12 ||
+ RegOffset == rTxAGC_A_Mcs07_Mcs04)
RegOffset = 0xc90;
- if (RegOffset == rTxAGC_B_Mcs15_Mcs12 || RegOffset == rTxAGC_B_Mcs07_Mcs04)
+ if (RegOffset == rTxAGC_B_Mcs15_Mcs12 ||
+ RegOffset == rTxAGC_B_Mcs07_Mcs04)
RegOffset = 0xc98;
for (i = 0; i < 3; i++) {
if (i != 2)
- writeVal = (writeVal > 8) ? (writeVal-8) : 0;
+ writeVal = (writeVal > 8) ?
+ (writeVal - 8) : 0;
else
- writeVal = (writeVal > 6) ? (writeVal-6) : 0;
+ writeVal = (writeVal > 6) ?
+ (writeVal - 6) : 0;
rtl8723au_write8(Adapter, RegOffset + i,
(u8)writeVal);
}
@@ -379,8 +387,9 @@ static void writeOFDMPowerReg(struct rtw_adapter *Adapter, u8 index, u32 *pValue
* Function: PHY_RF6052SetOFDMTxPower
*
* Overview: For legacy and HY OFDM, we must read EEPROM TX power index for
- * different channel and read original value in TX power register area from
- * 0xe00. We increase offset and original value to be correct tx pwr.
+ * different channel and read original value in TX power
+ * register area from 0xe00. We increase offset and
+ * original value to be correct tx pwr.
*
* Input: NONE
*
@@ -389,20 +398,23 @@ static void writeOFDMPowerReg(struct rtw_adapter *Adapter, u8 index, u32 *pValue
* Return: NONE
*
* Revised History:
- * When Who Remark
- * 11/05/2008 MHC Simulate 8192 series method.
- * 01/06/2009 MHC 1. Prevent Path B tx power overflow or underflow dure to
- * A/B pwr difference or legacy/HT pwr diff.
- * 2. We concern with path B legacy/HT OFDM difference.
- * 01/22/2009 MHC Support new EPRO format from SD3.
+ * When Remark
+ * 11/05/2008 MHC Simulate 8192 series method.
+ * 01/06/2009 MHC 1. Prevent Path B tx power overflow or
+ * underflow dure to A/B pwr difference or
+ * legacy/HT pwr diff.
+ * 2. We concern with path B legacy/HT OFDM difference.
+ * 01/22/2009 MHC Support new EPRO format from SD3.
*
*---------------------------------------------------------------------------*/
-void rtl8723a_PHY_RF6052SetOFDMTxPower(struct rtw_adapter *Adapter, u8 *pPowerLevel, u8 Channel)
+void rtl8723a_PHY_RF6052SetOFDMTxPower(struct rtw_adapter *Adapter,
+ u8 *pPowerLevel, u8 Channel)
{
u32 writeVal[2], powerBase0[2], powerBase1[2];
u8 index = 0;
- getPowerBase(Adapter, pPowerLevel, Channel, &powerBase0[0], &powerBase1[0]);
+ getPowerBase(Adapter, pPowerLevel, Channel,
+ &powerBase0[0], &powerBase1[0]);
for (index = 0; index < 6; index++) {
getTxPowerWriteValByRegulatory(Adapter, Channel, index,
@@ -416,7 +428,7 @@ static int phy_RF6052_Config_ParaFile(struct rtw_adapter *Adapter)
{
u32 u4RegValue = 0;
u8 eRFPath;
- struct bb_reg_define *pPhyReg;
+ struct bb_reg_define *pPhyReg;
int rtStatus = _SUCCESS;
struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
@@ -430,15 +442,17 @@ static int phy_RF6052_Config_ParaFile(struct rtw_adapter *Adapter)
/*----Store original RFENV control type----*/
switch (eRFPath) {
case RF_PATH_A:
- u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV);
+ u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs,
+ bRFSI_RFENV);
break;
case RF_PATH_B:
- u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV<<16);
+ u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs,
+ bRFSI_RFENV << 16);
break;
}
/*----Set RF_ENV enable----*/
- PHY_SetBBReg(Adapter, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
+ PHY_SetBBReg(Adapter, pPhyReg->rfintfe, bRFSI_RFENV << 16, 0x1);
udelay(1);/* PlatformStallExecution(1); */
/*----Set RF_ENV output high----*/
@@ -446,10 +460,12 @@ static int phy_RF6052_Config_ParaFile(struct rtw_adapter *Adapter)
udelay(1);/* PlatformStallExecution(1); */
/* Set bit number of Address and Data for RF register */
- PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); /* Set 1 to 4 bits for 8255 */
+ PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireAddressLength,
+ 0x0); /* Set 1 to 4 bits for 8255 */
udelay(1);/* PlatformStallExecution(1); */
- PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); /* Set 0 to 12 bits for 8255 */
+ PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireDataLength,
+ 0x0); /* Set 0 to 12 bits for 8255 */
udelay(1);/* PlatformStallExecution(1); */
/*----Initialize RF fom connfiguration file----*/
@@ -464,15 +480,16 @@ static int phy_RF6052_Config_ParaFile(struct rtw_adapter *Adapter)
/*----Restore RFENV control type----*/;
switch (eRFPath) {
case RF_PATH_A:
- PHY_SetBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
+ PHY_SetBBReg(Adapter, pPhyReg->rfintfs,
+ bRFSI_RFENV, u4RegValue);
break;
case RF_PATH_B:
- PHY_SetBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
+ PHY_SetBBReg(Adapter, pPhyReg->rfintfs,
+ bRFSI_RFENV << 16, u4RegValue);
break;
}
if (rtStatus != _SUCCESS) {
- /* RT_TRACE(COMP_FPGA, DBG_LOUD, ("phy_RF6052_Config_ParaFile():Radio[%d] Fail!!", eRFPath)); */
goto phy_RF6052_Config_ParaFile_Fail;
}
}
--
1.9.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
