Rework lcd_init method to make it a little bit more clear about
the precedence of the params, move LCD geometry and pins layout
to the LCD struct and thus make the LCD-related module params
effectively read-only.
Signed-off-by: Mariusz Gorski <marius.gorski@xxxxxxxxx>
---
drivers/staging/panel/panel.c | 304 ++++++++++++++++++++++--------------------
1 file changed, 163 insertions(+), 141 deletions(-)
diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c
index 5868a28..0bdb447 100644
--- a/drivers/staging/panel/panel.c
+++ b/drivers/staging/panel/panel.c
@@ -225,6 +225,21 @@ static wait_queue_head_t keypad_read_wait;
/* lcd-specific variables */
static struct {
bool enabled;
+ int height;
+ int width;
+ int bwidth;
+ int hwidth;
+ int charset;
+ int proto;
+ /* TODO: use union here? */
+ struct {
+ int e;
+ int rs;
+ int rw;
+ int cl;
+ int da;
+ int bl;
+ } pins;
} lcd;
/* Needed only for init */
@@ -766,7 +781,7 @@ static void lcd_send_serial(int byte)
/* turn the backlight on or off */
static void lcd_backlight(int on)
{
- if (lcd_bl_pin == PIN_NONE)
+ if (lcd.pins.bl == PIN_NONE)
return;
/* The backlight is activated by setting the AUTOFEED line to +5V */
@@ -865,23 +880,23 @@ static void lcd_write_data_tilcd(int data)
static void lcd_gotoxy(void)
{
lcd_write_cmd(0x80 /* set DDRAM address */
- | (lcd_addr_y ? lcd_hwidth : 0)
+ | (lcd_addr_y ? lcd.hwidth : 0)
/* we force the cursor to stay at the end of the
line if it wants to go farther */
- | ((lcd_addr_x < lcd_bwidth) ? lcd_addr_x &
- (lcd_hwidth - 1) : lcd_bwidth - 1));
+ | ((lcd_addr_x < lcd.bwidth) ? lcd_addr_x &
+ (lcd.hwidth - 1) : lcd.bwidth - 1));
}
static void lcd_print(char c)
{
- if (lcd_addr_x < lcd_bwidth) {
+ if (lcd_addr_x < lcd.bwidth) {
if (lcd_char_conv != NULL)
c = lcd_char_conv[(unsigned char)c];
lcd_write_data(c);
lcd_addr_x++;
}
/* prevents the cursor from wrapping onto the next line */
- if (lcd_addr_x == lcd_bwidth)
+ if (lcd_addr_x == lcd.bwidth)
lcd_gotoxy();
}
@@ -895,7 +910,7 @@ static void lcd_clear_fast_s(void)
lcd_gotoxy();
spin_lock_irq(&pprt_lock);
- for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) {
+ for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) {
lcd_send_serial(0x5F); /* R/W=W, RS=1 */
lcd_send_serial(' ' & 0x0F);
lcd_send_serial((' ' >> 4) & 0x0F);
@@ -918,7 +933,7 @@ static void lcd_clear_fast_p8(void)
lcd_gotoxy();
spin_lock_irq(&pprt_lock);
- for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) {
+ for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) {
/* present the data to the data port */
w_dtr(pprt, ' ');
@@ -956,7 +971,7 @@ static void lcd_clear_fast_tilcd(void)
lcd_gotoxy();
spin_lock_irq(&pprt_lock);
- for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) {
+ for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) {
/* present the data to the data port */
w_dtr(pprt, ' ');
udelay(60);
@@ -981,7 +996,7 @@ static void lcd_clear_display(void)
static void lcd_init_display(void)
{
- lcd_flags = ((lcd_height > 1) ? LCD_FLAG_N : 0)
+ lcd_flags = ((lcd.height > 1) ? LCD_FLAG_N : 0)
| LCD_FLAG_D | LCD_FLAG_C | LCD_FLAG_B;
long_sleep(20); /* wait 20 ms after power-up for the paranoid */
@@ -1095,17 +1110,17 @@ static inline int handle_lcd_special_code(void)
case 'l': /* Shift Cursor Left */
if (lcd_addr_x > 0) {
/* back one char if not at end of line */
- if (lcd_addr_x < lcd_bwidth)
+ if (lcd_addr_x < lcd.bwidth)
lcd_write_cmd(0x10);
lcd_addr_x--;
}
processed = 1;
break;
case 'r': /* shift cursor right */
- if (lcd_addr_x < lcd_width) {
+ if (lcd_addr_x < lcd.width) {
/* allow the cursor to pass the end of the line */
if (lcd_addr_x <
- (lcd_bwidth - 1))
+ (lcd.bwidth - 1))
lcd_write_cmd(0x14);
lcd_addr_x++;
}
@@ -1124,7 +1139,7 @@ static inline int handle_lcd_special_code(void)
case 'k': { /* kill end of line */
int x;
- for (x = lcd_addr_x; x < lcd_bwidth; x++)
+ for (x = lcd_addr_x; x < lcd.bwidth; x++)
lcd_write_data(' ');
/* restore cursor position */
@@ -1272,7 +1287,7 @@ static void lcd_write_char(char c)
if (lcd_addr_x > 0) {
/* check if we're not at the
end of the line */
- if (lcd_addr_x < lcd_bwidth)
+ if (lcd_addr_x < lcd.bwidth)
/* back one char */
lcd_write_cmd(0x10);
lcd_addr_x--;
@@ -1289,10 +1304,10 @@ static void lcd_write_char(char c)
case '\n':
/* flush the remainder of the current line and
go to the beginning of the next line */
- for (; lcd_addr_x < lcd_bwidth; lcd_addr_x++)
+ for (; lcd_addr_x < lcd.bwidth; lcd_addr_x++)
lcd_write_data(' ');
lcd_addr_x = 0;
- lcd_addr_y = (lcd_addr_y + 1) % lcd_height;
+ lcd_addr_y = (lcd_addr_y + 1) % lcd.height;
lcd_gotoxy();
break;
case '\r':
@@ -1421,174 +1436,164 @@ static void lcd_init(void)
switch (selected_lcd_type) {
case LCD_TYPE_OLD:
/* parallel mode, 8 bits */
- if (lcd_proto == NOT_SET)
- lcd_proto = LCD_PROTO_PARALLEL;
- if (lcd_charset == NOT_SET)
- lcd_charset = LCD_CHARSET_NORMAL;
- if (lcd_e_pin == PIN_NOT_SET)
- lcd_e_pin = PIN_STROBE;
- if (lcd_rs_pin == PIN_NOT_SET)
- lcd_rs_pin = PIN_AUTOLF;
-
- if (lcd_width == NOT_SET)
- lcd_width = 40;
- if (lcd_bwidth == NOT_SET)
- lcd_bwidth = 40;
- if (lcd_hwidth == NOT_SET)
- lcd_hwidth = 64;
- if (lcd_height == NOT_SET)
- lcd_height = 2;
+ lcd.proto = LCD_PROTO_PARALLEL;
+ lcd.charset = LCD_CHARSET_NORMAL;
+ lcd.pins.e = PIN_STROBE;
+ lcd.pins.rs = PIN_AUTOLF;
+
+ lcd.width = 40;
+ lcd.bwidth = 40;
+ lcd.hwidth = 64;
+ lcd.height = 2;
break;
case LCD_TYPE_KS0074:
/* serial mode, ks0074 */
- if (lcd_proto == NOT_SET)
- lcd_proto = LCD_PROTO_SERIAL;
- if (lcd_charset == NOT_SET)
- lcd_charset = LCD_CHARSET_KS0074;
- if (lcd_bl_pin == PIN_NOT_SET)
- lcd_bl_pin = PIN_AUTOLF;
- if (lcd_cl_pin == PIN_NOT_SET)
- lcd_cl_pin = PIN_STROBE;
- if (lcd_da_pin == PIN_NOT_SET)
- lcd_da_pin = PIN_D0;
-
- if (lcd_width == NOT_SET)
- lcd_width = 16;
- if (lcd_bwidth == NOT_SET)
- lcd_bwidth = 40;
- if (lcd_hwidth == NOT_SET)
- lcd_hwidth = 16;
- if (lcd_height == NOT_SET)
- lcd_height = 2;
+ lcd.proto = LCD_PROTO_SERIAL;
+ lcd.charset = LCD_CHARSET_KS0074;
+ lcd.pins.bl = PIN_AUTOLF;
+ lcd.pins.cl = PIN_STROBE;
+ lcd.pins.da = PIN_D0;
+
+ lcd.width = 16;
+ lcd.bwidth = 40;
+ lcd.hwidth = 16;
+ lcd.height = 2;
break;
case LCD_TYPE_NEXCOM:
/* parallel mode, 8 bits, generic */
- if (lcd_proto == NOT_SET)
- lcd_proto = LCD_PROTO_PARALLEL;
- if (lcd_charset == NOT_SET)
- lcd_charset = LCD_CHARSET_NORMAL;
- if (lcd_e_pin == PIN_NOT_SET)
- lcd_e_pin = PIN_AUTOLF;
- if (lcd_rs_pin == PIN_NOT_SET)
- lcd_rs_pin = PIN_SELECP;
- if (lcd_rw_pin == PIN_NOT_SET)
- lcd_rw_pin = PIN_INITP;
-
- if (lcd_width == NOT_SET)
- lcd_width = 16;
- if (lcd_bwidth == NOT_SET)
- lcd_bwidth = 40;
- if (lcd_hwidth == NOT_SET)
- lcd_hwidth = 64;
- if (lcd_height == NOT_SET)
- lcd_height = 2;
+ lcd.proto = LCD_PROTO_PARALLEL;
+ lcd.charset = LCD_CHARSET_NORMAL;
+ lcd.pins.e = PIN_AUTOLF;
+ lcd.pins.rs = PIN_SELECP;
+ lcd.pins.rw = PIN_INITP;
+
+ lcd.width = 16;
+ lcd.bwidth = 40;
+ lcd.hwidth = 64;
+ lcd.height = 2;
break;
case LCD_TYPE_CUSTOM:
/* customer-defined */
- if (lcd_proto == NOT_SET)
- lcd_proto = DEFAULT_LCD_PROTO;
- if (lcd_charset == NOT_SET)
- lcd_charset = DEFAULT_LCD_CHARSET;
+ lcd.proto = DEFAULT_LCD_PROTO;
+ lcd.charset = DEFAULT_LCD_CHARSET;
/* default geometry will be set later */
break;
case LCD_TYPE_HANTRONIX:
/* parallel mode, 8 bits, hantronix-like */
default:
- if (lcd_proto == NOT_SET)
- lcd_proto = LCD_PROTO_PARALLEL;
- if (lcd_charset == NOT_SET)
- lcd_charset = LCD_CHARSET_NORMAL;
- if (lcd_e_pin == PIN_NOT_SET)
- lcd_e_pin = PIN_STROBE;
- if (lcd_rs_pin == PIN_NOT_SET)
- lcd_rs_pin = PIN_SELECP;
-
- if (lcd_width == NOT_SET)
- lcd_width = 16;
- if (lcd_bwidth == NOT_SET)
- lcd_bwidth = 40;
- if (lcd_hwidth == NOT_SET)
- lcd_hwidth = 64;
- if (lcd_height == NOT_SET)
- lcd_height = 2;
+ lcd.proto = LCD_PROTO_PARALLEL;
+ lcd.charset = LCD_CHARSET_NORMAL;
+ lcd.pins.e = PIN_STROBE;
+ lcd.pins.rs = PIN_SELECP;
+
+ lcd.width = 16;
+ lcd.bwidth = 40;
+ lcd.hwidth = 64;
+ lcd.height = 2;
break;
}
+ /* Overwrite with module params set on loading */
+ if (lcd_height > -1)
+ lcd.height = lcd_height;
+ if (lcd_width > -1)
+ lcd.width = lcd_width;
+ if (lcd_bwidth > -1)
+ lcd.bwidth = lcd_bwidth;
+ if (lcd_hwidth > -1)
+ lcd.hwidth = lcd_hwidth;
+ if (lcd_charset > -1)
+ lcd.charset = lcd_charset;
+ if (lcd_proto > -1)
+ lcd.proto = lcd_proto;
+ if (lcd_e_pin != PIN_NOT_SET)
+ lcd.pins.e = lcd_e_pin;
+ if (lcd_rs_pin != PIN_NOT_SET)
+ lcd.pins.rs = lcd_rs_pin;
+ if (lcd_rw_pin != PIN_NOT_SET)
+ lcd.pins.rw = lcd_rw_pin;
+ if (lcd_cl_pin != PIN_NOT_SET)
+ lcd.pins.cl = lcd_cl_pin;
+ if (lcd_da_pin != PIN_NOT_SET)
+ lcd.pins.da = lcd_da_pin;
+ if (lcd_bl_pin != PIN_NOT_SET)
+ lcd.pins.bl = lcd_bl_pin;
+
/* this is used to catch wrong and default values */
- if (lcd_width <= 0)
- lcd_width = DEFAULT_LCD_WIDTH;
- if (lcd_bwidth <= 0)
- lcd_bwidth = DEFAULT_LCD_BWIDTH;
- if (lcd_hwidth <= 0)
- lcd_hwidth = DEFAULT_LCD_HWIDTH;
- if (lcd_height <= 0)
- lcd_height = DEFAULT_LCD_HEIGHT;
-
- if (lcd_proto == LCD_PROTO_SERIAL) { /* SERIAL */
+ if (lcd.width <= 0)
+ lcd.width = DEFAULT_LCD_WIDTH;
+ if (lcd.bwidth <= 0)
+ lcd.bwidth = DEFAULT_LCD_BWIDTH;
+ if (lcd.hwidth <= 0)
+ lcd.hwidth = DEFAULT_LCD_HWIDTH;
+ if (lcd.height <= 0)
+ lcd.height = DEFAULT_LCD_HEIGHT;
+
+ if (lcd.proto == LCD_PROTO_SERIAL) { /* SERIAL */
lcd_write_cmd = lcd_write_cmd_s;
lcd_write_data = lcd_write_data_s;
lcd_clear_fast = lcd_clear_fast_s;
- if (lcd_cl_pin == PIN_NOT_SET)
- lcd_cl_pin = DEFAULT_LCD_PIN_SCL;
- if (lcd_da_pin == PIN_NOT_SET)
- lcd_da_pin = DEFAULT_LCD_PIN_SDA;
+ if (lcd.pins.cl == PIN_NOT_SET)
+ lcd.pins.cl = DEFAULT_LCD_PIN_SCL;
+ if (lcd.pins.da == PIN_NOT_SET)
+ lcd.pins.da = DEFAULT_LCD_PIN_SDA;
- } else if (lcd_proto == LCD_PROTO_PARALLEL) { /* PARALLEL */
+ } else if (lcd.proto == LCD_PROTO_PARALLEL) { /* PARALLEL */
lcd_write_cmd = lcd_write_cmd_p8;
lcd_write_data = lcd_write_data_p8;
lcd_clear_fast = lcd_clear_fast_p8;
- if (lcd_e_pin == PIN_NOT_SET)
- lcd_e_pin = DEFAULT_LCD_PIN_E;
- if (lcd_rs_pin == PIN_NOT_SET)
- lcd_rs_pin = DEFAULT_LCD_PIN_RS;
- if (lcd_rw_pin == PIN_NOT_SET)
- lcd_rw_pin = DEFAULT_LCD_PIN_RW;
+ if (lcd.pins.e == PIN_NOT_SET)
+ lcd.pins.e = DEFAULT_LCD_PIN_E;
+ if (lcd.pins.rs == PIN_NOT_SET)
+ lcd.pins.rs = DEFAULT_LCD_PIN_RS;
+ if (lcd.pins.rw == PIN_NOT_SET)
+ lcd.pins.rw = DEFAULT_LCD_PIN_RW;
} else {
lcd_write_cmd = lcd_write_cmd_tilcd;
lcd_write_data = lcd_write_data_tilcd;
lcd_clear_fast = lcd_clear_fast_tilcd;
}
- if (lcd_bl_pin == PIN_NOT_SET)
- lcd_bl_pin = DEFAULT_LCD_PIN_BL;
-
- if (lcd_e_pin == PIN_NOT_SET)
- lcd_e_pin = PIN_NONE;
- if (lcd_rs_pin == PIN_NOT_SET)
- lcd_rs_pin = PIN_NONE;
- if (lcd_rw_pin == PIN_NOT_SET)
- lcd_rw_pin = PIN_NONE;
- if (lcd_bl_pin == PIN_NOT_SET)
- lcd_bl_pin = PIN_NONE;
- if (lcd_cl_pin == PIN_NOT_SET)
- lcd_cl_pin = PIN_NONE;
- if (lcd_da_pin == PIN_NOT_SET)
- lcd_da_pin = PIN_NONE;
-
- if (lcd_charset == NOT_SET)
- lcd_charset = DEFAULT_LCD_CHARSET;
-
- if (lcd_charset == LCD_CHARSET_KS0074)
+ if (lcd.pins.bl == PIN_NOT_SET)
+ lcd.pins.bl = DEFAULT_LCD_PIN_BL;
+
+ if (lcd.pins.e == PIN_NOT_SET)
+ lcd.pins.e = PIN_NONE;
+ if (lcd.pins.rs == PIN_NOT_SET)
+ lcd.pins.rs = PIN_NONE;
+ if (lcd.pins.rw == PIN_NOT_SET)
+ lcd.pins.rw = PIN_NONE;
+ if (lcd.pins.bl == PIN_NOT_SET)
+ lcd.pins.bl = PIN_NONE;
+ if (lcd.pins.cl == PIN_NOT_SET)
+ lcd.pins.cl = PIN_NONE;
+ if (lcd.pins.da == PIN_NOT_SET)
+ lcd.pins.da = PIN_NONE;
+
+ if (lcd.charset == NOT_SET)
+ lcd.charset = DEFAULT_LCD_CHARSET;
+
+ if (lcd.charset == LCD_CHARSET_KS0074)
lcd_char_conv = lcd_char_conv_ks0074;
else
lcd_char_conv = NULL;
- if (lcd_bl_pin != PIN_NONE)
+ if (lcd.pins.bl != PIN_NONE)
init_scan_timer();
- pin_to_bits(lcd_e_pin, lcd_bits[LCD_PORT_D][LCD_BIT_E],
+ pin_to_bits(lcd.pins.e, lcd_bits[LCD_PORT_D][LCD_BIT_E],
lcd_bits[LCD_PORT_C][LCD_BIT_E]);
- pin_to_bits(lcd_rs_pin, lcd_bits[LCD_PORT_D][LCD_BIT_RS],
+ pin_to_bits(lcd.pins.rs, lcd_bits[LCD_PORT_D][LCD_BIT_RS],
lcd_bits[LCD_PORT_C][LCD_BIT_RS]);
- pin_to_bits(lcd_rw_pin, lcd_bits[LCD_PORT_D][LCD_BIT_RW],
+ pin_to_bits(lcd.pins.rw, lcd_bits[LCD_PORT_D][LCD_BIT_RW],
lcd_bits[LCD_PORT_C][LCD_BIT_RW]);
- pin_to_bits(lcd_bl_pin, lcd_bits[LCD_PORT_D][LCD_BIT_BL],
+ pin_to_bits(lcd.pins.bl, lcd_bits[LCD_PORT_D][LCD_BIT_BL],
lcd_bits[LCD_PORT_C][LCD_BIT_BL]);
- pin_to_bits(lcd_cl_pin, lcd_bits[LCD_PORT_D][LCD_BIT_CL],
+ pin_to_bits(lcd.pins.cl, lcd_bits[LCD_PORT_D][LCD_BIT_CL],
lcd_bits[LCD_PORT_C][LCD_BIT_CL]);
- pin_to_bits(lcd_da_pin, lcd_bits[LCD_PORT_D][LCD_BIT_DA],
+ pin_to_bits(lcd.pins.da, lcd_bits[LCD_PORT_D][LCD_BIT_DA],
lcd_bits[LCD_PORT_C][LCD_BIT_DA]);
/* before this line, we must NOT send anything to the display.
@@ -2279,6 +2284,23 @@ static int __init panel_init_module(void)
}
/*
+ * Init lcd struct with load-time values to preserve exact current
+ * functionality (at least for now).
+ */
+ lcd.height = lcd_height;
+ lcd.width = lcd_width;
+ lcd.bwidth = lcd_bwidth;
+ lcd.hwidth = lcd_hwidth;
+ lcd.charset = lcd_charset;
+ lcd.proto = lcd_proto;
+ lcd.pins.e = lcd_e_pin;
+ lcd.pins.rs = lcd_rs_pin;
+ lcd.pins.rw = lcd_rw_pin;
+ lcd.pins.cl = lcd_cl_pin;
+ lcd.pins.da = lcd_da_pin;
+ lcd.pins.bl = lcd_bl_pin;
+
+ /*
* Overwrite selection with module param values (both keypad and lcd),
* where the deprecated params have lower prio.
*/
--
2.1.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
