[PATCH v2 18/18] staging: comedi: das800: use comedi_async 'scans_done' to detect EOA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Remove the private data member 'count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Reviewed-by: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/das800.c | 31 ++++++++++++-------------------
 1 file changed, 12 insertions(+), 19 deletions(-)

diff --git a/drivers/staging/comedi/drivers/das800.c b/drivers/staging/comedi/drivers/das800.c
index 55bc494..e5bdc24 100644
--- a/drivers/staging/comedi/drivers/das800.c
+++ b/drivers/staging/comedi/drivers/das800.c
@@ -219,7 +219,6 @@ static const struct das800_board das800_boards[] = {
 };
 
 struct das800_private {
-	unsigned int count;	/* number of data points left to be taken */
 	unsigned int divisor1;	/* counter 1 value for timed conversions */
 	unsigned int divisor2;	/* counter 2 value for timed conversions */
 	unsigned int do_bits;	/* digital output bits */
@@ -286,9 +285,6 @@ static void das800_set_frequency(struct comedi_device *dev)
 
 static int das800_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
-	struct das800_private *devpriv = dev->private;
-
-	devpriv->count = 0;
 	das800_disable(dev);
 	return 0;
 }
@@ -399,7 +395,6 @@ static int das800_ai_do_cmd(struct comedi_device *dev,
 			    struct comedi_subdevice *s)
 {
 	const struct das800_board *thisboard = dev->board_ptr;
-	struct das800_private *devpriv = dev->private;
 	struct comedi_async *async = s->async;
 	struct comedi_cmd *cmd = &async->cmd;
 	unsigned int gain = CR_RANGE(cmd->chanlist[0]);
@@ -422,11 +417,6 @@ static int das800_ai_do_cmd(struct comedi_device *dev,
 	gain &= 0xf;
 	outb(gain, dev->iobase + DAS800_GAIN);
 
-	if (cmd->stop_src == TRIG_COUNT)
-		devpriv->count = cmd->stop_arg * cmd->chanlist_len;
-	else	/* TRIG_NONE */
-		devpriv->count = 0;
-
 	/* enable auto channel scan, send interrupts on end of conversion
 	 * and set clock source to internal or external
 	 */
@@ -509,11 +499,13 @@ static irqreturn_t das800_interrupt(int irq, void *d)
 		if (s->maxdata == 0x0fff)
 			val >>= 4;	/* 12-bit sample */
 
-		/* if there are more data points to collect */
-		if (cmd->stop_src == TRIG_NONE || devpriv->count > 0) {
-			val &= s->maxdata;
-			comedi_buf_write_samples(s, &val, 1);
-			devpriv->count--;
+		val &= s->maxdata;
+		comedi_buf_write_samples(s, &val, 1);
+
+		if (cmd->stop_src == TRIG_COUNT &&
+		    async->scans_done >= cmd->stop_arg) {
+			async->events |= COMEDI_CB_EOA;
+			break;
 		}
 	}
 
@@ -524,9 +516,11 @@ static irqreturn_t das800_interrupt(int irq, void *d)
 		return IRQ_HANDLED;
 	}
 
-	if (cmd->stop_src == TRIG_NONE || devpriv->count > 0) {
-		/* Re-enable card's interrupt.
-		 * We already have spinlock, so indirect addressing is safe */
+	if (!(async->events & COMEDI_CB_CANCEL_MASK)) {
+		/*
+		 * Re-enable card's interrupt.
+		 * We already have spinlock, so indirect addressing is safe
+		 */
 		das800_ind_write(dev, CONTROL1_INTE | devpriv->do_bits,
 				 CONTROL1);
 		spin_unlock_irqrestore(&dev->spinlock, irq_flags);
@@ -534,7 +528,6 @@ static irqreturn_t das800_interrupt(int irq, void *d)
 		/* otherwise, stop taking data */
 		spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 		das800_disable(dev);
-		async->events |= COMEDI_CB_EOA;
 	}
 	comedi_handle_events(dev, s);
 	return IRQ_HANDLED;
-- 
2.0.3

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux