[PATCH v2 12/18] staging: comedi: s626: use comedi_async 'scans_done' to detect EOA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.

Also, remove the unnecessary COMEDI_CB_EOS event. The core automatically
detects and adds that event.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/s626.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 6976bb0..fc7d8a5 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -78,7 +78,6 @@ struct s626_buffer_dma {
 
 struct s626_private {
 	uint8_t ai_cmd_running;		/* ai_cmd is running */
-	int ai_sample_count;		/* number of samples to acquire */
 	unsigned int ai_sample_timer;	/* time between samples in
 					 * units of the timer */
 	int ai_convert_count;		/* conversion counter */
@@ -1496,16 +1495,11 @@ static bool s626_handle_eos_interrupt(struct comedi_device *dev)
 		comedi_buf_write_samples(s, &tempdata, 1);
 	}
 
-	/* end of scan occurs */
-	async->events |= COMEDI_CB_EOS;
+	if (cmd->stop_src == TRIG_COUNT && async->scans_done >= cmd->stop_arg)
+		async->events |= COMEDI_CB_EOA;
 
-	if (cmd->stop_src == TRIG_COUNT) {
-		devpriv->ai_sample_count--;
-		if (devpriv->ai_sample_count <= 0) {
-			devpriv->ai_cmd_running = 0;
-			async->events |= COMEDI_CB_EOA;
-		}
-	}
+	if (async->events & COMEDI_CB_CANCEL_MASK)
+		devpriv->ai_cmd_running = 0;
 
 	if (devpriv->ai_cmd_running && cmd->scan_begin_src == TRIG_EXT)
 		s626_dio_set_irq(dev, cmd->scan_begin_arg);
@@ -2091,8 +2085,6 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		break;
 	}
 
-	devpriv->ai_sample_count = cmd->stop_arg;
-
 	s626_reset_adc(dev, ppl);
 
 	switch (cmd->start_src) {
-- 
2.0.3

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux