Re: [PATCH v2 2/6] staging: ft1000: space prohibited after '(', '&' and before ')'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Nov 01, 2014 at 10:47:23AM +0800, Chen Weixiang wrote:
> Remove following code style errors from ft1000/ft1000-pcmcia/ft1000_hw.c:
> ERROR: space prohibited after that open parenthesis '('
> ERROR: space prohibited before that close parenthesis ')'
> ERROR: space prohibited after that '&' (ctx:WxW)
> 
> Signed-off-by: Chen Weixiang <weixiang.chen@xxxxxxxxx>
> ---
>  drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c | 32 ++++++++++++------------
>  1 file changed, 16 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
> index fc28dee..9ef7817 100644
> --- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
> +++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
> @@ -888,7 +888,7 @@ static bool ft1000_receive_cmd(struct net_device *dev, u16 *pbuffer,
>  	unsigned long flags;
>  
>  	if (info->AsicID == ELECTRABUZZ_ID) {
> -		size = ( ft1000_read_dpram(dev, *pnxtph) ) + sizeof(struct pseudo_hdr);
> +		size = (ft1000_read_dpram(dev, *pnxtph)) + sizeof(struct pseudo_hdr);

line over 80 char.

>  	} else {
>  		size =
>  			ntohs(ft1000_read_dpram_mag_16
> @@ -998,10 +998,10 @@ static void ft1000_proc_drvmsg(struct net_device *dev)
>      else {
>          tempword = FT1000_DPRAM_MAG_RX_BASE;
>      }
> -    if ( ft1000_receive_cmd(dev, &cmdbuffer[0], MAX_CMD_SQSIZE, &tempword) ) {
> +    if (ft1000_receive_cmd(dev, &cmdbuffer[0], MAX_CMD_SQSIZE, &tempword)) {

whitespace at the beginning of the line.

thanks
sudip

>  
>  		/* Get the message type which is total_len + PSEUDO header + msgtype + message body */
> -		pdrvmsg = (struct drv_msg *) & cmdbuffer[0];
> +		pdrvmsg = (struct drv_msg *) &cmdbuffer[0];
>  		msgtype = ntohs(pdrvmsg->type);
>  		DEBUG(1, "Command message type = 0x%x\n", msgtype);
>  		switch (msgtype) {
> @@ -1055,7 +1055,7 @@ static void ft1000_proc_drvmsg(struct net_device *dev)
>  			info->CardReady = 1;
>  			break;
>  		case MEDIA_STATE:
> -			pmediamsg = (struct media_msg *) & cmdbuffer[0];
> +			pmediamsg = (struct media_msg *) &cmdbuffer[0];
>  			if (info->ProgConStat != 0xFF) {
>  			if (pmediamsg->state) {
>  				DEBUG(1, "Media is up\n");
> @@ -1087,7 +1087,7 @@ static void ft1000_proc_drvmsg(struct net_device *dev)
>              }
>  			break;
>  		case DSP_INIT_MSG:
> -			pdspinitmsg = (struct dsp_init_msg *) & cmdbuffer[0];
> +			pdspinitmsg = (struct dsp_init_msg *) &cmdbuffer[0];
>  			memcpy(info->DspVer, pdspinitmsg->DspVer, DSPVERSZ);
>  			DEBUG(1, "DSPVER = 0x%2x 0x%2x 0x%2x 0x%2x\n",
>  				  info->DspVer[0], info->DspVer[1], info->DspVer[2],
> @@ -1121,7 +1121,7 @@ static void ft1000_proc_drvmsg(struct net_device *dev)
>  			tempword = ntohs(pdrvmsg->length);
>  			info->DSPInfoBlklen = tempword;
>  			if (tempword < (MAX_DSP_SESS_REC - 4)) {
> -				pmsg = (u16 *) & pdrvmsg->data[0];
> +				pmsg = (u16 *) &pdrvmsg->data[0];
>  				for (i = 0; i < ((tempword + 1) / 2); i++) {
>  					DEBUG(1,
>  						  "FT1000:drivermsg:dsp info data = 0x%x\n",
> @@ -1203,7 +1203,7 @@ static void ft1000_proc_drvmsg(struct net_device *dev)
>  				 * Put message into Slow Queue
>  				 * Form Pseudo header
>  				 */
> -				pmsg = (u16 *) & tempbuffer[0];
> +				pmsg = (u16 *) &tempbuffer[0];
>  				ppseudo_hdr = (struct pseudo_hdr *) pmsg;
>  				ppseudo_hdr->length = htons(0x0012);
>  				ppseudo_hdr->source = 0x10;
> @@ -1224,7 +1224,7 @@ static void ft1000_proc_drvmsg(struct net_device *dev)
>                  for (i = 1; i < 7; i++) {
>                      ppseudo_hdr->checksum ^= *pmsg++;
>                  }
> -				pmsg = (u16 *) & tempbuffer[16];
> +				pmsg = (u16 *) &tempbuffer[16];
>  				*pmsg++ = htons(RSP_DRV_ERR_RPT_MSG);
>  				*pmsg++ = htons(0x000e);
>  				*pmsg++ = htons(info->DSP_TIME[0]);
> @@ -1880,22 +1880,22 @@ static int ft1000_copy_down_pkt(struct net_device *dev, u16 * packet, u16 len)
>  				  i + 8, htons(*packet));
>  		}
>  	} else {
> -		outl(*(u32 *) & pseudo.buff[0],
> +		outl(*(u32 *) &pseudo.buff[0],
>  			 dev->base_addr + FT1000_REG_MAG_UFDR);
>  		DEBUG(1, "ft1000_copy_down_pkt: Pseudo = 0x%8x\n",
> -			  *(u32 *) & pseudo.buff[0]);
> -		outl(*(u32 *) & pseudo.buff[2],
> +			  *(u32 *) &pseudo.buff[0]);
> +		outl(*(u32 *) &pseudo.buff[2],
>  			 dev->base_addr + FT1000_REG_MAG_UFDR);
>  		DEBUG(1, "ft1000_copy_down_pkt: Pseudo = 0x%8x\n",
> -			  *(u32 *) & pseudo.buff[2]);
> -		outl(*(u32 *) & pseudo.buff[4],
> +			  *(u32 *) &pseudo.buff[2]);
> +		outl(*(u32 *) &pseudo.buff[4],
>  			 dev->base_addr + FT1000_REG_MAG_UFDR);
>  		DEBUG(1, "ft1000_copy_down_pkt: Pseudo = 0x%8x\n",
> -			  *(u32 *) & pseudo.buff[4]);
> -		outl(*(u32 *) & pseudo.buff[6],
> +			  *(u32 *) &pseudo.buff[4]);
> +		outl(*(u32 *) &pseudo.buff[6],
>  			 dev->base_addr + FT1000_REG_MAG_UFDR);
>  		DEBUG(1, "ft1000_copy_down_pkt: Pseudo = 0x%8x\n",
> -			  *(u32 *) & pseudo.buff[6]);
> +			  *(u32 *) &pseudo.buff[6]);
>  
>  		plong = (u32 *) packet;
>  		/* Write PPP type + IP Packet into Downlink FIFO */
> -- 
> 2.1.2
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux