Convert this driver to use comedi_load_firmware() to download the firmware
to the board.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/me4000.c | 93 ++++++++++++++-------------------
1 file changed, 40 insertions(+), 53 deletions(-)
diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c
index 5c10b78..6dd7c1b 100644
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -44,8 +44,6 @@ broken.
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
#include "../comedidev.h"
@@ -53,10 +51,7 @@ broken.
#include "8253.h"
#include "plx9052.h"
-#if 0
-/* file removed due to GPL incompatibility */
-#include "me4000_fw.h"
-#endif
+#define ME4000_FIRMWARE "me4000_firmware.bin"
/*
* ME4000 Register map and bit defines
@@ -333,27 +328,20 @@ static const struct comedi_lrange me4000_ai_range = {
}
};
-#define FIRMWARE_NOT_AVAILABLE 1
-#if FIRMWARE_NOT_AVAILABLE
-extern unsigned char *xilinx_firm;
-#endif
-
-static int xilinx_download(struct comedi_device *dev)
+static int me4000_xilinx_download(struct comedi_device *dev,
+ const u8 *data, size_t size,
+ unsigned long context)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct me4000_info *info = dev->private;
unsigned long xilinx_iobase = pci_resource_start(pcidev, 5);
- u32 value = 0;
- wait_queue_head_t queue;
- int idx = 0;
- int size = 0;
- unsigned int intcsr;
+ unsigned int file_length;
+ unsigned int val;
+ unsigned int i;
if (!xilinx_iobase)
return -ENODEV;
- init_waitqueue_head(&queue);
-
/*
* Set PLX local interrupt 2 polarity to high.
* Interrupt is thrown by init pin of xilinx.
@@ -361,61 +349,58 @@ static int xilinx_download(struct comedi_device *dev)
outl(PLX9052_INTCSR_LI2POL, info->plx_regbase + PLX9052_INTCSR);
/* Set /CS and /WRITE of the Xilinx */
- value = inl(info->plx_regbase + PLX9052_CNTRL);
- value |= PLX9052_CNTRL_UIO2_DATA;
- outl(value, info->plx_regbase + PLX9052_CNTRL);
+ val = inl(info->plx_regbase + PLX9052_CNTRL);
+ val |= PLX9052_CNTRL_UIO2_DATA;
+ outl(val, info->plx_regbase + PLX9052_CNTRL);
/* Init Xilinx with CS1 */
inb(xilinx_iobase + 0xC8);
/* Wait until /INIT pin is set */
udelay(20);
- intcsr = inl(info->plx_regbase + PLX9052_INTCSR);
- if (!(intcsr & PLX9052_INTCSR_LI2STAT)) {
+ val = inl(info->plx_regbase + PLX9052_INTCSR);
+ if (!(val & PLX9052_INTCSR_LI2STAT)) {
dev_err(dev->class_dev, "Can't init Xilinx\n");
return -EIO;
}
/* Reset /CS and /WRITE of the Xilinx */
- value = inl(info->plx_regbase + PLX9052_CNTRL);
- value &= ~PLX9052_CNTRL_UIO2_DATA;
- outl(value, info->plx_regbase + PLX9052_CNTRL);
- if (FIRMWARE_NOT_AVAILABLE) {
- dev_err(dev->class_dev,
- "xilinx firmware unavailable due to licensing, aborting");
- return -EIO;
- } else {
- /* Download Xilinx firmware */
- size = (xilinx_firm[0] << 24) + (xilinx_firm[1] << 16) +
- (xilinx_firm[2] << 8) + xilinx_firm[3];
- udelay(10);
+ val = inl(info->plx_regbase + PLX9052_CNTRL);
+ val &= ~PLX9052_CNTRL_UIO2_DATA;
+ outl(val, info->plx_regbase + PLX9052_CNTRL);
- for (idx = 0; idx < size; idx++) {
- outb(xilinx_firm[16 + idx], xilinx_iobase);
- udelay(10);
+ /* Download Xilinx firmware */
+ file_length = (((unsigned int)data[0] & 0xff) << 24) +
+ (((unsigned int)data[1] & 0xff) << 16) +
+ (((unsigned int)data[2] & 0xff) << 8) +
+ ((unsigned int)data[3] & 0xff);
+ udelay(10);
- /* Check if BUSY flag is low */
- if (inl(info->plx_regbase + PLX9052_CNTRL) & PLX9052_CNTRL_UIO1_DATA) {
- dev_err(dev->class_dev,
- "Xilinx is still busy (idx = %d)\n",
- idx);
- return -EIO;
- }
+ for (i = 0; i < file_length; i++) {
+ outb(data[16 + i], xilinx_iobase);
+ udelay(10);
+
+ /* Check if BUSY flag is low */
+ val = inl(info->plx_regbase + PLX9052_CNTRL);
+ if (val & PLX9052_CNTRL_UIO1_DATA) {
+ dev_err(dev->class_dev,
+ "Xilinx is still busy (i = %d)\n", i);
+ return -EIO;
}
}
/* If done flag is high download was successful */
- if (inl(info->plx_regbase + PLX9052_CNTRL) & PLX9052_CNTRL_UIO0_DATA) {
- } else {
+ val = inl(info->plx_regbase + PLX9052_CNTRL);
+ if (!(val & PLX9052_CNTRL_UIO0_DATA)) {
dev_err(dev->class_dev, "DONE flag is not set\n");
dev_err(dev->class_dev, "Download not successful\n");
return -EIO;
}
/* Set /CS and /WRITE */
- value = inl(info->plx_regbase + PLX9052_CNTRL);
- value |= PLX9052_CNTRL_UIO2_DATA;
- outl(value, info->plx_regbase + PLX9052_CNTRL);
+ val = inl(info->plx_regbase + PLX9052_CNTRL);
+ val |= PLX9052_CNTRL_UIO2_DATA;
+ outl(val, info->plx_regbase + PLX9052_CNTRL);
return 0;
}
@@ -1386,8 +1371,9 @@ static int me4000_auto_attach(struct comedi_device *dev,
if (!info->plx_regbase || !dev->iobase || !info->timer_regbase)
return -ENODEV;
- result = xilinx_download(dev);
- if (result)
+ result = comedi_load_firmware(dev, &pcidev->dev, ME4000_FIRMWARE,
+ me4000_xilinx_download, 0);
+ if (result < 0)
return result;
me4000_reset(dev);
@@ -1550,3 +1536,4 @@ module_comedi_pci_driver(me4000_driver, me4000_pci_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org";);
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(ME4000_FIRMWARE);
--
2.0.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
