This driver has some serious bitrot. In addition, it's not in the Kconfig or Makefile so it can't even be built. Just remove it. It would be easier to rewrite the driver than fix it. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- .../comedi/drivers/addi-data/hwdrv_apci3200.c | 3002 -------------------- drivers/staging/comedi/drivers/addi_apci_3200.c | 125 - 2 files changed, 3127 deletions(-) delete mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c delete mode 100644 drivers/staging/comedi/drivers/addi_apci_3200.c diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c deleted file mode 100644 index 470b3f0..0000000 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c +++ /dev/null @@ -1,3002 +0,0 @@ -/** -@verbatim - -Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. - - ADDI-DATA GmbH - Dieselstrasse 3 - D-77833 Ottersweier - Tel: +19(0)7223/9493-0 - Fax: +49(0)7223/9493-92 - http://www.addi-data.com - info@xxxxxxxxxxxxx - -This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. - -This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - -@endverbatim -*/ -/* - - +-----------------------------------------------------------------------+ - | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | - +-----------------------------------------------------------------------+ - | Tel : +49 (0) 7223/9493-0 | email : info@xxxxxxxxxxxxx | - | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | - +-------------------------------+---------------------------------------+ - | Project : APCI-3200 | Compiler : GCC | - | Module name : hwdrv_apci3200.c| Version : 2.96 | - +-------------------------------+---------------------------------------+ - | Project manager: Eric Stolz | Date : 02/12/2002 | - +-------------------------------+---------------------------------------+ - | Description : Hardware Layer Access For APCI-3200 | - +-----------------------------------------------------------------------+ - | UPDATES | - +----------+-----------+------------------------------------------------+ - | Date | Author | Description of updates | - +----------+-----------+------------------------------------------------+ - | 02.07.04 | J. Krauth | Modification from the driver in order to | - | | | correct some errors when using several boards. | - | | | | - | | | | - +----------+-----------+------------------------------------------------+ - | 26.10.04 | J. Krauth | - Update for COMEDI 0.7.68 | - | | | - Read eeprom value | - | | | - Append APCI-3300 | - +----------+-----------+------------------------------------------------+ -*/ - -/* Card Specific information */ -/* #define APCI3200_ADDRESS_RANGE 264 */ - -/* Analog Input related Defines */ -#define APCI3200_AI_OFFSET_GAIN 0 -#define APCI3200_AI_SC_TEST 4 -#define APCI3200_AI_IRQ 8 -#define APCI3200_AI_AUTOCAL 12 -#define APCI3200_RELOAD_CONV_TIME_VAL 32 -#define APCI3200_CONV_TIME_TIME_BASE 36 -#define APCI3200_RELOAD_DELAY_TIME_VAL 40 -#define APCI3200_DELAY_TIME_TIME_BASE 44 -#define APCI3200_AI_MODULE1 0 -#define APCI3200_AI_MODULE2 64 -#define APCI3200_AI_MODULE3 128 -#define APCI3200_AI_MODULE4 192 -#define TRUE 1 -#define FALSE 0 -#define APCI3200_AI_EOSIRQ 16 -#define APCI3200_AI_EOS 20 -#define APCI3200_AI_CHAN_ID 24 -#define APCI3200_AI_CHAN_VAL 28 -#define ANALOG_INPUT 0 -#define TEMPERATURE 1 -#define RESISTANCE 2 - -#define ENABLE_EXT_TRIG 1 -#define ENABLE_EXT_GATE 2 -#define ENABLE_EXT_TRIG_GATE 3 - -#define APCI3200_MAXVOLT 2.5 -#define ADDIDATA_GREATER_THAN_TEST 0 -#define ADDIDATA_LESS_THAN_TEST 1 - -#define ADDIDATA_UNIPOLAR 1 -#define ADDIDATA_BIPOLAR 2 - -#define MAX_MODULE 4 - -/* ANALOG INPUT RANGE */ -static const struct comedi_lrange range_apci3200_ai = { - 8, { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(2), - BIP_RANGE(1), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2), - UNI_RANGE(1) - } -}; - -static const struct comedi_lrange range_apci3300_ai = { - 4, { - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2), - UNI_RANGE(1) - } -}; - -int MODULE_NO; -struct { - int i_Gain; - int i_Polarity; - int i_OffsetRange; - int i_Coupling; - int i_SingleDiff; - int i_AutoCalibration; - unsigned int ui_ReloadValue; - unsigned int ui_TimeUnitReloadVal; - int i_Interrupt; - int i_ModuleSelection; -} Config_Parameters_Module1, Config_Parameters_Module2, - Config_Parameters_Module3, Config_Parameters_Module4; - - -struct str_ADDIDATA_RTDStruct { - unsigned int ul_NumberOfValue; - unsigned int *pul_ResistanceValue; - unsigned int *pul_TemperatureValue; -}; - -struct str_Module { - unsigned long ul_CurrentSourceCJC; - unsigned long ul_CurrentSource[5]; - unsigned long ul_GainFactor[8]; /* Gain Factor */ - unsigned int w_GainValue[10]; -}; - -struct str_BoardInfos { - - int i_CJCAvailable; - int i_CJCPolarity; - int i_CJCGain; - int i_InterruptFlag; - int i_ADDIDATAPolarity; - int i_ADDIDATAGain; - int i_AutoCalibration; - int i_ADDIDATAConversionTime; - int i_ADDIDATAConversionTimeUnit; - int i_ADDIDATAType; - int i_ChannelNo; - int i_ChannelCount; - int i_ScanType; - int i_FirstChannel; - int i_LastChannel; - int i_Sum; - int i_Offset; - unsigned int ui_Channel_num; - int i_Count; - int i_Initialised; - unsigned int ui_InterruptChannelValue[144]; /* Buffer */ - unsigned char b_StructInitialized; - /* 7 is the maximal number of channels */ - unsigned int ui_ScanValueArray[7 + 12]; - - int i_ConnectionType; - int i_NbrOfModule; - struct str_Module s_Module[MAX_MODULE]; -}; - -/* BEGIN JK 06.07.04: Management of sevrals boards */ -/* - int i_CJCAvailable=1; - int i_CJCPolarity=0; - int i_CJCGain=2;/* changed from 0 to 2 */ - int i_InterruptFlag=0; - int i_ADDIDATAPolarity; - int i_ADDIDATAGain; - int i_AutoCalibration=0; /* : auto calibration */ - int i_ADDIDATAConversionTime; - int i_ADDIDATAConversionTimeUnit; - int i_ADDIDATAType; - int i_ChannelNo; - int i_ChannelCount=0; - int i_ScanType; - int i_FirstChannel; - int i_LastChannel; - int i_Sum=0; - int i_Offset; - unsigned int ui_Channel_num=0; - static int i_Count=0; - int i_Initialised=0; - unsigned int ui_InterruptChannelValue[96]; /* Buffer */ -*/ -struct str_BoardInfos s_BoardInfos[100]; /* 100 will be the max number of boards to be used */ -/* END JK 06.07.04: Management of sevrals boards */ - -#define AMCC_OP_REG_MCSR 0x3c -#define EEPROM_BUSY 0x80000000 -#define NVCMD_LOAD_LOW (0x4 << 5) /* nvRam load low command */ -#define NVCMD_LOAD_HIGH (0x5 << 5) /* nvRam load high command */ -#define NVCMD_BEGIN_READ (0x7 << 5) /* nvRam begin read command */ -#define NVCMD_BEGIN_WRITE (0x6 << 5) /* EEPROM begin write command */ - -static int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead, - unsigned int dw_PCIBoardEepromAddress, - unsigned short w_EepromStartAddress, - unsigned short *pw_DataRead) -{ - unsigned int dw_eeprom_busy = 0; - int i_Counter = 0; - int i_WordCounter; - int i; - unsigned char pb_ReadByte[1]; - unsigned char b_ReadLowByte = 0; - unsigned char b_ReadHighByte = 0; - unsigned char b_SelectedAddressLow = 0; - unsigned char b_SelectedAddressHigh = 0; - unsigned short w_ReadWord = 0; - - for (i_WordCounter = 0; i_WordCounter < i_NbOfWordsToRead; - i_WordCounter++) { - do { - dw_eeprom_busy = - inl(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR); - dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } while (dw_eeprom_busy == EEPROM_BUSY); - - for (i_Counter = 0; i_Counter < 2; i_Counter++) { - b_SelectedAddressLow = (w_EepromStartAddress + i_Counter) % 256; /* Read the low 8 bit part */ - b_SelectedAddressHigh = (w_EepromStartAddress + i_Counter) / 256; /* Read the high 8 bit part */ - - /* Select the load low address mode */ - outb(NVCMD_LOAD_LOW, - dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + - 3); - - /* Wait on busy */ - do { - dw_eeprom_busy = - inl(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR); - dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } while (dw_eeprom_busy == EEPROM_BUSY); - - /* Load the low address */ - outb(b_SelectedAddressLow, - dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + - 2); - - /* Wait on busy */ - do { - dw_eeprom_busy = - inl(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR); - dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } while (dw_eeprom_busy == EEPROM_BUSY); - - /* Select the load high address mode */ - outb(NVCMD_LOAD_HIGH, - dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + - 3); - - /* Wait on busy */ - do { - dw_eeprom_busy = - inl(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR); - dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } while (dw_eeprom_busy == EEPROM_BUSY); - - /* Load the high address */ - outb(b_SelectedAddressHigh, - dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + - 2); - - /* Wait on busy */ - do { - dw_eeprom_busy = - inl(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR); - dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } while (dw_eeprom_busy == EEPROM_BUSY); - - /* Select the READ mode */ - outb(NVCMD_BEGIN_READ, - dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + - 3); - - /* Wait on busy */ - do { - dw_eeprom_busy = - inl(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR); - dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } while (dw_eeprom_busy == EEPROM_BUSY); - - /* Read data into the EEPROM */ - *pb_ReadByte = - inb(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR + 2); - - /* Wait on busy */ - do { - dw_eeprom_busy = - inl(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR); - dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } while (dw_eeprom_busy == EEPROM_BUSY); - - /* Select the upper address part */ - if (i_Counter == 0) - b_ReadLowByte = pb_ReadByte[0]; - else - b_ReadHighByte = pb_ReadByte[0]; - - - /* Sleep */ - msleep(1); - - } - w_ReadWord = - (b_ReadLowByte | (((unsigned short)b_ReadHighByte) * - 256)); - - pw_DataRead[i_WordCounter] = w_ReadWord; - - w_EepromStartAddress += 2; /* to read the next word */ - - } /* for (...) i_NbOfWordsToRead */ - return 0; -} - -static void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress, - struct str_BoardInfos *BoardInformations) -{ - unsigned short w_AnalogInputMainHeaderAddress; - unsigned short w_AnalogInputComponentAddress; - unsigned short w_NumberOfModuls = 0; - unsigned short w_CurrentSources[2]; - unsigned short w_ModulCounter = 0; - unsigned short w_FirstHeaderSize = 0; - unsigned short w_NumberOfInputs = 0; - unsigned short w_CJCFlag = 0; - unsigned short w_NumberOfGainValue = 0; - unsigned short w_SingleHeaderAddress = 0; - unsigned short w_SingleHeaderSize = 0; - unsigned short w_Input = 0; - unsigned short w_GainFactorAddress = 0; - unsigned short w_GainFactorValue[2]; - unsigned short w_GainIndex = 0; - unsigned short w_GainValue = 0; - - /*****************************************/ - /** Get the Analog input header address **/ - /*****************************************/ - i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ - dw_PCIBoardEepromAddress, 0x116, /* w_EepromStartAddress: Analog input header address */ - &w_AnalogInputMainHeaderAddress); - - /*******************************************/ - /** Compute the real analog input address **/ - /*******************************************/ - w_AnalogInputMainHeaderAddress = w_AnalogInputMainHeaderAddress + 0x100; - - /******************************/ - /** Get the number of moduls **/ - /******************************/ - i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ - dw_PCIBoardEepromAddress, w_AnalogInputMainHeaderAddress + 0x02, /* w_EepromStartAddress: Number of conponment */ - &w_NumberOfModuls); - - for (w_ModulCounter = 0; w_ModulCounter < w_NumberOfModuls; - w_ModulCounter++) { - /***********************************/ - /** Compute the component address **/ - /***********************************/ - w_AnalogInputComponentAddress = - w_AnalogInputMainHeaderAddress + - (w_FirstHeaderSize * w_ModulCounter) + 0x04; - - /****************************/ - /** Read first header size **/ - /****************************/ - i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ - dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress, /* Address of the first header */ - &w_FirstHeaderSize); - - w_FirstHeaderSize = w_FirstHeaderSize >> 4; - - /***************************/ - /** Read number of inputs **/ - /***************************/ - i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ - dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x06, /* Number of inputs for the first modul */ - &w_NumberOfInputs); - - w_NumberOfInputs = w_NumberOfInputs >> 4; - - /***********************/ - /** Read the CJC flag **/ - /***********************/ - i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ - dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x08, /* CJC flag */ - &w_CJCFlag); - - w_CJCFlag = (w_CJCFlag >> 3) & 0x1; /* Get only the CJC flag */ - - /*******************************/ - /** Read number of gain value **/ - /*******************************/ - i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ - dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x44, /* Number of gain value */ - &w_NumberOfGainValue); - - w_NumberOfGainValue = w_NumberOfGainValue & 0xFF; - - /***********************************/ - /** Compute single header address **/ - /***********************************/ - w_SingleHeaderAddress = - w_AnalogInputComponentAddress + 0x46 + - (((w_NumberOfGainValue / 16) + 1) * 2) + - (6 * w_NumberOfGainValue) + - (4 * (((w_NumberOfGainValue / 16) + 1) * 2)); - - /********************************************/ - /** Read current sources value for input 1 **/ - /********************************************/ - i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ - dw_PCIBoardEepromAddress, w_SingleHeaderAddress, /* w_EepromStartAddress: Single header address */ - &w_SingleHeaderSize); - - w_SingleHeaderSize = w_SingleHeaderSize >> 4; - - /*************************************/ - /** Read gain factor for the module **/ - /*************************************/ - w_GainFactorAddress = w_AnalogInputComponentAddress; - - for (w_GainIndex = 0; w_GainIndex < w_NumberOfGainValue; - w_GainIndex++) { - /************************************/ - /** Read gain value for the module **/ - /************************************/ - i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ - dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + (2 * (1 + (w_NumberOfGainValue / 16))) + (0x02 * w_GainIndex), /* Gain value */ - &w_GainValue); - - BoardInformations->s_Module[w_ModulCounter]. - w_GainValue[w_GainIndex] = w_GainValue; - - /*************************************/ - /** Read gain factor for the module **/ - /*************************************/ - i_AddiHeaderRW_ReadEeprom(2, /* i_NbOfWordsToRead */ - dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + ((2 * w_NumberOfGainValue) + (2 * (1 + (w_NumberOfGainValue / 16)))) + (0x04 * w_GainIndex), /* Gain factor */ - w_GainFactorValue); - - BoardInformations->s_Module[w_ModulCounter]. - ul_GainFactor[w_GainIndex] = - (w_GainFactorValue[1] << 16) + - w_GainFactorValue[0]; - } - - /***************************************************************/ - /** Read current source value for each channels of the module **/ - /***************************************************************/ - for (w_Input = 0; w_Input < w_NumberOfInputs; w_Input++) { - /********************************************/ - /** Read current sources value for input 1 **/ - /********************************************/ - i_AddiHeaderRW_ReadEeprom(2, /* i_NbOfWordsToRead */ - dw_PCIBoardEepromAddress, - (w_Input * w_SingleHeaderSize) + - w_SingleHeaderAddress + 0x0C, w_CurrentSources); - - /************************************/ - /** Save the current sources value **/ - /************************************/ - BoardInformations->s_Module[w_ModulCounter]. - ul_CurrentSource[w_Input] = - (w_CurrentSources[0] + - ((w_CurrentSources[1] & 0xFFF) << 16)); - } - - /***************************************/ - /** Read the CJC current source value **/ - /***************************************/ - i_AddiHeaderRW_ReadEeprom(2, /* i_NbOfWordsToRead */ - dw_PCIBoardEepromAddress, - (w_Input * w_SingleHeaderSize) + w_SingleHeaderAddress + - 0x0C, w_CurrentSources); - - /************************************/ - /** Save the current sources value **/ - /************************************/ - BoardInformations->s_Module[w_ModulCounter]. - ul_CurrentSourceCJC = - (w_CurrentSources[0] + - ((w_CurrentSources[1] & 0xFFF) << 16)); - } -} - -static int i_APCI3200_GetChannelCalibrationValue(struct comedi_device *dev, - unsigned int ui_Channel_num, - unsigned int *CJCCurrentSource, - unsigned int *ChannelCurrentSource, - unsigned int *ChannelGainFactor) -{ - int i_DiffChannel = 0; - int i_Module = 0; - - /* Test if single or differential mode */ - if (s_BoardInfos[dev->minor].i_ConnectionType == 1) { - /* if diff */ - - if (ui_Channel_num <= 1) - i_DiffChannel = ui_Channel_num, i_Module = 0; - else if ((ui_Channel_num >= 2) && (ui_Channel_num <= 3)) - i_DiffChannel = ui_Channel_num - 2, i_Module = 1; - else if ((ui_Channel_num >= 4) && (ui_Channel_num <= 5)) - i_DiffChannel = ui_Channel_num - 4, i_Module = 2; - else if ((ui_Channel_num >= 6) && (ui_Channel_num <= 7)) - i_DiffChannel = ui_Channel_num - 6, i_Module = 3; - - } else { - /* if single */ - if ((ui_Channel_num == 0) || (ui_Channel_num == 1)) - i_DiffChannel = 0, i_Module = 0; - else if ((ui_Channel_num == 2) || (ui_Channel_num == 3)) - i_DiffChannel = 1, i_Module = 0; - else if ((ui_Channel_num == 4) || (ui_Channel_num == 5)) - i_DiffChannel = 0, i_Module = 1; - else if ((ui_Channel_num == 6) || (ui_Channel_num == 7)) - i_DiffChannel = 1, i_Module = 1; - else if ((ui_Channel_num == 8) || (ui_Channel_num == 9)) - i_DiffChannel = 0, i_Module = 2; - else if ((ui_Channel_num == 10) || (ui_Channel_num == 11)) - i_DiffChannel = 1, i_Module = 2; - else if ((ui_Channel_num == 12) || (ui_Channel_num == 13)) - i_DiffChannel = 0, i_Module = 3; - else if ((ui_Channel_num == 14) || (ui_Channel_num == 15)) - i_DiffChannel = 1, i_Module = 3; - } - - /* Test if thermocouple or RTD mode */ - *CJCCurrentSource = - s_BoardInfos[dev->minor].s_Module[i_Module].ul_CurrentSourceCJC; - - *ChannelCurrentSource = - s_BoardInfos[dev->minor].s_Module[i_Module]. - ul_CurrentSource[i_DiffChannel]; - /* } */ - /* } */ - - /* Channle gain factor */ - *ChannelGainFactor = - s_BoardInfos[dev->minor].s_Module[i_Module]. - ul_GainFactor[s_BoardInfos[dev->minor].i_ADDIDATAGain]; - /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - - return 0; -} - -static int apci3200_di_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - struct addi_private *devpriv = dev->private; - - data[1] = inl(devpriv->i_IobaseReserved) & 0xf; - - return insn->n; -} - -static int apci3200_do_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - struct addi_private *devpriv = dev->private; - - s->state = inl(devpriv->i_IobaseAddon) & 0xf; - - if (comedi_dio_update_state(s, data)) - outl(s->state, devpriv->i_IobaseAddon); - - data[1] = s->state; - - return insn->n; -} - -static int i_APCI3200_Read1AnalogInputChannel(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - struct addi_private *devpriv = dev->private; - unsigned int ui_EOC = 0; - unsigned int ui_ChannelNo = 0; - unsigned int ui_CommandRegister = 0; - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* ui_ChannelNo=i_ChannelNo; */ - ui_ChannelNo = s_BoardInfos[dev->minor].i_ChannelNo; - - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /*********************************/ - /* Write the channel to configure */ - /*********************************/ - /* Begin JK 20.10.2004: Bad channel value is used when using differential mode */ - /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */ - /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */ - outl(0 | s_BoardInfos[dev->minor].i_ChannelNo, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x4); - /* End JK 20.10.2004: Bad channel value is used when using differential mode */ - - /*******************************/ - /* Set the convert timing unit */ - /*******************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - - /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */ - outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); - - /**************************/ - /* Set the convert timing */ - /**************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - - /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */ - outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); - - /**************************************************************************/ - /* Set the start end stop index to the selected channel and set the start */ - /**************************************************************************/ - - ui_CommandRegister = ui_ChannelNo | (ui_ChannelNo << 8) | 0x80000; - - /*Test if the interrupt is enable */ - if (s_BoardInfos[dev->minor].i_InterruptFlag == 1) { - /* Enable the interrupt */ - ui_CommandRegister = ui_CommandRegister | 0x00100000; - } - - /******************************/ - /* Write the command register */ - /******************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - - /* outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); */ - outl(ui_CommandRegister, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); - - /*Test if interrupt is enable */ - if (s_BoardInfos[dev->minor].i_InterruptFlag == 0) { - do { - /*************************/ - /*Read the EOC Status bit */ - /*************************/ - - /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */ - ui_EOC = inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 20) & 1; - - } while (ui_EOC != 1); - - /***************************************/ - /* Read the digital value of the input */ - /***************************************/ - - /* data[0] = inl (devpriv->iobase+i_Offset + 28); */ - data[0] = - inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 28); - /* END JK 06.07.04: Management of sevrals boards */ - - } - return 0; -} - -static int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device *dev, - unsigned int *data) -{ - struct addi_private *devpriv = dev->private; - unsigned int ui_Temp = 0, ui_EOC = 0; - unsigned int ui_CommandRegister = 0; - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /*********************************/ - /* Write the channel to configure */ - /*********************************/ - /* Begin JK 20.10.2004: This seems not necessary ! */ - /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */ - /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */ - /* End JK 20.10.2004: This seems not necessary ! */ - - /*******************************/ - /* Set the convert timing unit */ - /*******************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */ - outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); - /**************************/ - /* Set the convert timing */ - /**************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */ - outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); - /*****************************/ - /*Read the calibration offset */ - /*****************************/ - /* ui_Temp = inl(devpriv->iobase+i_Offset + 12); */ - ui_Temp = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); - - /*********************************/ - /*Configure the Offset Conversion */ - /*********************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl((ui_Temp | 0x00020000), devpriv->iobase+i_Offset + 12); */ - outl((ui_Temp | 0x00020000), - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); - /*******************************/ - /*Initialise ui_CommandRegister */ - /*******************************/ - - ui_CommandRegister = 0; - - /*Test if the interrupt is enable */ - if (s_BoardInfos[dev->minor].i_InterruptFlag == 1) { - /*Enable the interrupt */ - ui_CommandRegister = ui_CommandRegister | 0x00100000; - } - - /**********************/ - /*Start the conversion */ - /**********************/ - ui_CommandRegister = ui_CommandRegister | 0x00080000; - - /***************************/ - /*Write the command regiter */ - /***************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); */ - outl(ui_CommandRegister, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); - - /*Test if interrupt is enable */ - if (s_BoardInfos[dev->minor].i_InterruptFlag == 0) { - do { - /*******************/ - /*Read the EOC flag */ - /*******************/ - - /* ui_EOC = inl (devpriv->iobase+i_Offset + 20) & 1; */ - ui_EOC = inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 20) & 1; - - } while (ui_EOC != 1); - - /**************************************************/ - /*Read the digital value of the calibration Offset */ - /**************************************************/ - - /* data[0] = inl(devpriv->iobase+i_Offset+ 28); */ - data[0] = - inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 28); - } - return 0; -} - -static int i_APCI3200_ReadCalibrationGainValue(struct comedi_device *dev, - unsigned int *data) -{ - struct addi_private *devpriv = dev->private; - unsigned int ui_EOC = 0; - int ui_CommandRegister = 0; - - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /*********************************/ - /* Write the channel to configure */ - /*********************************/ - /* Begin JK 20.10.2004: This seems not necessary ! */ - /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */ - /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */ - /* End JK 20.10.2004: This seems not necessary ! */ - - /***************************/ - /*Read the calibration gain */ - /***************************/ - /*******************************/ - /* Set the convert timing unit */ - /*******************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */ - outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); - /**************************/ - /* Set the convert timing */ - /**************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */ - outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); - /*******************************/ - /*Configure the Gain Conversion */ - /*******************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(0x00040000 , devpriv->iobase+i_Offset + 12); */ - outl(0x00040000, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); - - /*******************************/ - /*Initialise ui_CommandRegister */ - /*******************************/ - - ui_CommandRegister = 0; - - /*Test if the interrupt is enable */ - if (s_BoardInfos[dev->minor].i_InterruptFlag == 1) { - /*Enable the interrupt */ - ui_CommandRegister = ui_CommandRegister | 0x00100000; - } - - /**********************/ - /*Start the conversion */ - /**********************/ - - ui_CommandRegister = ui_CommandRegister | 0x00080000; - /***************************/ - /*Write the command regiter */ - /***************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); */ - outl(ui_CommandRegister, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); - - /*Test if interrupt is enable */ - if (s_BoardInfos[dev->minor].i_InterruptFlag == 0) { - do { - - /*******************/ - /*Read the EOC flag */ - /*******************/ - - /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */ - ui_EOC = inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 20) & 1; - - } while (ui_EOC != 1); - - /************************************************/ - /*Read the digital value of the calibration Gain */ - /************************************************/ - - /* data[0] = inl(devpriv->iobase+i_Offset + 28); */ - data[0] = - inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 28); - - } - return 0; -} - -static int i_APCI3200_ReadCJCValue(struct comedi_device *dev, - unsigned int *data) -{ - struct addi_private *devpriv = dev->private; - unsigned int ui_EOC = 0; - int ui_CommandRegister = 0; - - /******************************/ - /*Set the converting time unit */ - /******************************/ - - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - - /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */ - outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); - /**************************/ - /* Set the convert timing */ - /**************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - - /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */ - outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); - - /******************************/ - /*Configure the CJC Conversion */ - /******************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - - /* outl( 0x00000400 , devpriv->iobase+i_Offset + 4); */ - outl(0x00000400, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); - /*******************************/ - /*Initialise dw_CommandRegister */ - /*******************************/ - ui_CommandRegister = 0; - /*Test if the interrupt is enable */ - if (s_BoardInfos[dev->minor].i_InterruptFlag == 1) { - /*Enable the interrupt */ - ui_CommandRegister = ui_CommandRegister | 0x00100000; - } - - /**********************/ - /*Start the conversion */ - /**********************/ - - ui_CommandRegister = ui_CommandRegister | 0x00080000; - - /***************************/ - /*Write the command regiter */ - /***************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); */ - outl(ui_CommandRegister, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); - - /*Test if interrupt is enable */ - if (s_BoardInfos[dev->minor].i_InterruptFlag == 0) { - do { - - /*******************/ - /*Read the EOC flag */ - /*******************/ - - /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */ - ui_EOC = inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 20) & 1; - - } while (ui_EOC != 1); - - /***********************************/ - /*Read the digital value of the CJC */ - /***********************************/ - - /* data[0] = inl(devpriv->iobase+i_Offset + 28); */ - data[0] = - inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 28); - } - return 0; -} - -static int i_APCI3200_ReadCJCCalOffset(struct comedi_device *dev, - unsigned int *data) -{ - struct addi_private *devpriv = dev->private; - unsigned int ui_EOC = 0; - int ui_CommandRegister = 0; - - /*******************************************/ - /*Read calibration offset value for the CJC */ - /*******************************************/ - /*******************************/ - /* Set the convert timing unit */ - /*******************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */ - outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); - /**************************/ - /* Set the convert timing */ - /**************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */ - outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); - /******************************/ - /*Configure the CJC Conversion */ - /******************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(0x00000400 , devpriv->iobase+i_Offset + 4); */ - outl(0x00000400, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); - /*********************************/ - /*Configure the Offset Conversion */ - /*********************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(0x00020000, devpriv->iobase+i_Offset + 12); */ - outl(0x00020000, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); - /*******************************/ - /*Initialise ui_CommandRegister */ - /*******************************/ - ui_CommandRegister = 0; - /*Test if the interrupt is enable */ - if (s_BoardInfos[dev->minor].i_InterruptFlag == 1) { - /*Enable the interrupt */ - ui_CommandRegister = ui_CommandRegister | 0x00100000; - } - - /**********************/ - /*Start the conversion */ - /**********************/ - ui_CommandRegister = ui_CommandRegister | 0x00080000; - /***************************/ - /*Write the command regiter */ - /***************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(ui_CommandRegister,devpriv->iobase+i_Offset + 8); */ - outl(ui_CommandRegister, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); - if (s_BoardInfos[dev->minor].i_InterruptFlag == 0) { - do { - /*******************/ - /*Read the EOC flag */ - /*******************/ - /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */ - ui_EOC = inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 20) & 1; - } while (ui_EOC != 1); - - /**************************************************/ - /*Read the digital value of the calibration Offset */ - /**************************************************/ - /* data[0] = inl(devpriv->iobase+i_Offset + 28); */ - data[0] = - inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 28); - } - return 0; -} - -static int i_APCI3200_ReadCJCCalGain(struct comedi_device *dev, - unsigned int *data) -{ - struct addi_private *devpriv = dev->private; - unsigned int ui_EOC = 0; - int ui_CommandRegister = 0; - - /*******************************/ - /* Set the convert timing unit */ - /*******************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */ - outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); - /**************************/ - /* Set the convert timing */ - /**************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */ - outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); - /******************************/ - /*Configure the CJC Conversion */ - /******************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(0x00000400,devpriv->iobase+i_Offset + 4); */ - outl(0x00000400, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); - /*******************************/ - /*Configure the Gain Conversion */ - /*******************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(0x00040000,devpriv->iobase+i_Offset + 12); */ - outl(0x00040000, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); - - /*******************************/ - /*Initialise dw_CommandRegister */ - /*******************************/ - ui_CommandRegister = 0; - /*Test if the interrupt is enable */ - if (s_BoardInfos[dev->minor].i_InterruptFlag == 1) { - /*Enable the interrupt */ - ui_CommandRegister = ui_CommandRegister | 0x00100000; - } - /**********************/ - /*Start the conversion */ - /**********************/ - ui_CommandRegister = ui_CommandRegister | 0x00080000; - /***************************/ - /*Write the command regiter */ - /***************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(ui_CommandRegister ,devpriv->iobase+i_Offset + 8); */ - outl(ui_CommandRegister, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); - if (s_BoardInfos[dev->minor].i_InterruptFlag == 0) { - do { - /*******************/ - /*Read the EOC flag */ - /*******************/ - /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */ - ui_EOC = inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 20) & 1; - } while (ui_EOC != 1); - /************************************************/ - /*Read the digital value of the calibration Gain */ - /************************************************/ - /* data[0] = inl (devpriv->iobase+i_Offset + 28); */ - data[0] = - inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 28); - } - return 0; -} - -static int apci3200_reset(struct comedi_device *dev) -{ - struct addi_private *devpriv = dev->private; - int i_Temp; - unsigned int dw_Dummy; - - /* i_InterruptFlag=0; */ - /* i_Initialised==0; */ - /* i_Count=0; */ - /* i_Sum=0; */ - - s_BoardInfos[dev->minor].i_InterruptFlag = 0; - s_BoardInfos[dev->minor].i_Initialised = 0; - s_BoardInfos[dev->minor].i_Count = 0; - s_BoardInfos[dev->minor].i_Sum = 0; - s_BoardInfos[dev->minor].b_StructInitialized = 0; - - outl(0x83838383, devpriv->i_IobaseAmcc + 0x60); - - /* Enable the interrupt for the controller */ - dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38); - outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38); - outl(0, devpriv->i_IobaseAddon); /* Resets the output */ - /***************/ - /*Empty the buffer */ - /**************/ - for (i_Temp = 0; i_Temp <= 95; i_Temp++) { - /* ui_InterruptChannelValue[i_Temp]=0; */ - s_BoardInfos[dev->minor].ui_InterruptChannelValue[i_Temp] = 0; - } /* for(i_Temp=0;i_Temp<=95;i_Temp++) */ - /*****************************/ - /*Reset the START and IRQ bit */ - /*****************************/ - for (i_Temp = 0; i_Temp <= 192;) { - while (((inl(devpriv->iobase + i_Temp + 12) >> 19) & 1) != 1) ; - outl(0, devpriv->iobase + i_Temp + 8); - i_Temp = i_Temp + 64; - } /* for(i_Temp=0;i_Temp<=192;i_Temp+64) */ - return 0; -} - -/* - * Read value of the selected channel - * - * data[0] : Digital Value Of Input - * data[1] : Calibration Offset Value - * data[2] : Calibration Gain Value - * data[3] : CJC value - * data[4] : CJC offset value - * data[5] : CJC gain value - * data[6] : CJC current source from eeprom - * data[7] : Channel current source from eeprom - * data[8] : Channle gain factor from eeprom - */ -static int apci3200_ai_read(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - unsigned int ui_DummyValue = 0; - int i_ConvertCJCCalibration; - int i = 0; - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* if(i_Initialised==0) */ - if (s_BoardInfos[dev->minor].i_Initialised == 0) - /* END JK 06.07.04: Management of sevrals boards */ - { - apci3200_reset(dev); - return -EINVAL; - } /* if(i_Initialised==0); */ - - switch (insn->unused[0]) { - case 0: - - i_APCI3200_Read1AnalogInputChannel(dev, s, insn, - &ui_DummyValue); - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* ui_InterruptChannelValue[i_Count+0]=ui_DummyValue; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[s_BoardInfos[dev->minor]. - i_Count + 0] = ui_DummyValue; - /* END JK 06.07.04: Management of sevrals boards */ - - /* Begin JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - i_APCI3200_GetChannelCalibrationValue(dev, - s_BoardInfos[dev->minor].ui_Channel_num, - &s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[s_BoardInfos[dev->minor]. - i_Count + 6], - &s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[s_BoardInfos[dev->minor]. - i_Count + 7], - &s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[s_BoardInfos[dev->minor]. - i_Count + 8]); - /* End JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) */ - if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2) - && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE) - && (s_BoardInfos[dev->minor].i_CJCAvailable == 1)) - /* END JK 06.07.04: Management of sevrals boards */ - { - i_APCI3200_ReadCJCValue(dev, &ui_DummyValue); - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* ui_InterruptChannelValue[i_Count + 3]=ui_DummyValue; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[s_BoardInfos[dev-> - minor].i_Count + 3] = ui_DummyValue; - /* END JK 06.07.04: Management of sevrals boards */ - } /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) */ - else { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* ui_InterruptChannelValue[i_Count + 3]=0; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[s_BoardInfos[dev-> - minor].i_Count + 3] = 0; - /* END JK 06.07.04: Management of sevrals boards */ - } /* elseif((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) */ - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) */ - if ((s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) - && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE)) - /* END JK 06.07.04: Management of sevrals boards */ - { - i_APCI3200_ReadCalibrationOffsetValue(dev, - &ui_DummyValue); - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* ui_InterruptChannelValue[i_Count + 1]=ui_DummyValue; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[s_BoardInfos[dev-> - minor].i_Count + 1] = ui_DummyValue; - /* END JK 06.07.04: Management of sevrals boards */ - i_APCI3200_ReadCalibrationGainValue(dev, - &ui_DummyValue); - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* ui_InterruptChannelValue[i_Count + 2]=ui_DummyValue; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[s_BoardInfos[dev-> - minor].i_Count + 2] = ui_DummyValue; - /* END JK 06.07.04: Management of sevrals boards */ - } /* if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) */ - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)&& (i_CJCAvailable==1)) */ - if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2) - && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE) - && (s_BoardInfos[dev->minor].i_CJCAvailable == 1)) - /* END JK 06.07.04: Management of sevrals boards */ - { - /**********************************************************/ - /*Test if the Calibration channel must be read for the CJC */ - /**********************************************************/ - /**********************************/ - /*Test if the polarity is the same */ - /**********************************/ - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */ - if (s_BoardInfos[dev->minor].i_CJCPolarity != - s_BoardInfos[dev->minor].i_ADDIDATAPolarity) - /* END JK 06.07.04: Management of sevrals boards */ - { - i_ConvertCJCCalibration = 1; - } /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */ - else { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* if(i_CJCGain==i_ADDIDATAGain) */ - if (s_BoardInfos[dev->minor].i_CJCGain == - s_BoardInfos[dev->minor].i_ADDIDATAGain) - /* END JK 06.07.04: Management of sevrals boards */ - { - i_ConvertCJCCalibration = 0; - } /* if(i_CJCGain==i_ADDIDATAGain) */ - else { - i_ConvertCJCCalibration = 1; - } /* elseif(i_CJCGain==i_ADDIDATAGain) */ - } /* elseif(i_CJCPolarity!=i_ADDIDATAPolarity) */ - if (i_ConvertCJCCalibration == 1) { - i_APCI3200_ReadCJCCalOffset(dev, - &ui_DummyValue); - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* ui_InterruptChannelValue[i_Count+4]=ui_DummyValue; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[s_BoardInfos - [dev->minor].i_Count + 4] = - ui_DummyValue; - /* END JK 06.07.04: Management of sevrals boards */ - - i_APCI3200_ReadCJCCalGain(dev, &ui_DummyValue); - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* ui_InterruptChannelValue[i_Count+5]=ui_DummyValue; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[s_BoardInfos - [dev->minor].i_Count + 5] = - ui_DummyValue; - /* END JK 06.07.04: Management of sevrals boards */ - } /* if(i_ConvertCJCCalibration==1) */ - else { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* ui_InterruptChannelValue[i_Count+4]=0; */ - /* ui_InterruptChannelValue[i_Count+5]=0; */ - - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[s_BoardInfos - [dev->minor].i_Count + 4] = 0; - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[s_BoardInfos - [dev->minor].i_Count + 5] = 0; - /* END JK 06.07.04: Management of sevrals boards */ - } /* elseif(i_ConvertCJCCalibration==1) */ - } /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) */ - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* if(i_ScanType!=1) */ - if (s_BoardInfos[dev->minor].i_ScanType != 1) { - /* i_Count=0; */ - s_BoardInfos[dev->minor].i_Count = 0; - } /* if(i_ScanType!=1) */ - else { - /* i_Count=i_Count +6; */ - /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count +6; */ - s_BoardInfos[dev->minor].i_Count = - s_BoardInfos[dev->minor].i_Count + 9; - /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - } /* else if(i_ScanType!=1) */ - - /* if((i_ScanType==1) &&(i_InterruptFlag==1)) */ - if ((s_BoardInfos[dev->minor].i_ScanType == 1) - && (s_BoardInfos[dev->minor].i_InterruptFlag == 1)) { - /* i_Count=i_Count-6; */ - /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count-6; */ - s_BoardInfos[dev->minor].i_Count = - s_BoardInfos[dev->minor].i_Count - 9; - /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - } - /* if(i_ScanType==0) */ - if (s_BoardInfos[dev->minor].i_ScanType == 0) { - /* - data[0]= ui_InterruptChannelValue[0]; - data[1]= ui_InterruptChannelValue[1]; - data[2]= ui_InterruptChannelValue[2]; - data[3]= ui_InterruptChannelValue[3]; - data[4]= ui_InterruptChannelValue[4]; - data[5]= ui_InterruptChannelValue[5]; - */ - data[0] = - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[0]; - data[1] = - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[1]; - data[2] = - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[2]; - data[3] = - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[3]; - data[4] = - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[4]; - data[5] = - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[5]; - - /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - i_APCI3200_GetChannelCalibrationValue(dev, - s_BoardInfos[dev->minor].ui_Channel_num, - &data[6], &data[7], &data[8]); - /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - } - break; - case 1: - - for (i = 0; i < insn->n; i++) { - /* data[i]=ui_InterruptChannelValue[i]; */ - data[i] = - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue[i]; - } - - /* i_Count=0; */ - /* i_Sum=0; */ - /* if(i_ScanType==1) */ - s_BoardInfos[dev->minor].i_Count = 0; - s_BoardInfos[dev->minor].i_Sum = 0; - if (s_BoardInfos[dev->minor].i_ScanType == 1) { - /* i_Initialised=0; */ - /* i_InterruptFlag=0; */ - s_BoardInfos[dev->minor].i_Initialised = 0; - s_BoardInfos[dev->minor].i_InterruptFlag = 0; - /* END JK 06.07.04: Management of sevrals boards */ - } - break; - default: - printk("\nThe parameters passed are in error\n"); - apci3200_reset(dev); - return -EINVAL; - } /* switch(insn->unused[0]) */ - - return insn->n; -} - -/* - * Configures The Analog Input Subdevice - * - * data[0] = 0 Normal AI - * = 1 RTD - * = 2 THERMOCOUPLE - * data[1] = Gain To Use - * data[2] = 0 Bipolar - * = 1 Unipolar - * data[3] = Offset Range - * data[4] = 0 DC Coupling - * = 1 AC Coupling - * data[5] = 0 Single - * = 1 Differential - * data[6] = TimerReloadValue - * data[7] = ConvertingTimeUnit - * data[8] = 0 Analog voltage measurement - * = 1 Resistance measurement - * = 2 Temperature measurement - * data[9] = 0 Interrupt Disable - * = 1 INterrupt Enable - * data[10] = Type of Thermocouple - * data[11] = single channel Module Number - * data[12] = 0 Single Read - * = 1 Read more channel - * = 2 Single scan - * = 3 Continuous Scan - * data[13] = Number of channels to read - * data[14] = 0 RTD not used - * = 1 RTD 2 wire connection - * = 2 RTD 3 wire connection - * = 3 RTD 4 wire connection - */ -static int apci3200_ai_config(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - struct addi_private *devpriv = dev->private; - unsigned int ul_Config = 0, ul_Temp = 0; - unsigned int ui_ChannelNo = 0; - unsigned int ui_Dummy = 0; - int i_err = 0; - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* Initialize the structure */ - if (s_BoardInfos[dev->minor].b_StructInitialized != 1) { - s_BoardInfos[dev->minor].i_CJCAvailable = 1; - s_BoardInfos[dev->minor].i_CJCPolarity = 0; - s_BoardInfos[dev->minor].i_CJCGain = 2; /* changed from 0 to 2 */ - s_BoardInfos[dev->minor].i_InterruptFlag = 0; - s_BoardInfos[dev->minor].i_AutoCalibration = 0; /* : auto calibration */ - s_BoardInfos[dev->minor].i_ChannelCount = 0; - s_BoardInfos[dev->minor].i_Sum = 0; - s_BoardInfos[dev->minor].ui_Channel_num = 0; - s_BoardInfos[dev->minor].i_Count = 0; - s_BoardInfos[dev->minor].i_Initialised = 0; - s_BoardInfos[dev->minor].b_StructInitialized = 1; - - /* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - s_BoardInfos[dev->minor].i_ConnectionType = 0; - /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - - /* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - memset(s_BoardInfos[dev->minor].s_Module, 0, - sizeof(s_BoardInfos[dev->minor].s_Module[MAX_MODULE])); - - v_GetAPCI3200EepromCalibrationValue(devpriv->i_IobaseAmcc, - &s_BoardInfos[dev->minor]); - /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - } - - if (data[0] != 0 && data[0] != 1 && data[0] != 2) { - printk("\nThe selection of acquisition type is in error\n"); - i_err++; - } /* if(data[0]!=0 && data[0]!=1 && data[0]!=2) */ - if (data[0] == 1) { - if (data[14] != 0 && data[14] != 1 && data[14] != 2 - && data[14] != 4) { - printk("\n Error in selection of RTD connection type\n"); - i_err++; - } /* if(data[14]!=0 && data[14]!=1 && data[14]!=2 && data[14]!=4) */ - } /* if(data[0]==1 ) */ - if (data[1] < 0 || data[1] > 7) { - printk("\nThe selection of gain is in error\n"); - i_err++; - } /* if(data[1]<0 || data[1]>7) */ - if (data[2] != 0 && data[2] != 1) { - printk("\nThe selection of polarity is in error\n"); - i_err++; - } /* if(data[2]!=0 && data[2]!=1) */ - if (data[3] != 0) { - printk("\nThe selection of offset range is in error\n"); - i_err++; - } /* if(data[3]!=0) */ - if (data[4] != 0 && data[4] != 1) { - printk("\nThe selection of coupling is in error\n"); - i_err++; - } /* if(data[4]!=0 && data[4]!=1) */ - if (data[5] != 0 && data[5] != 1) { - printk("\nThe selection of single/differential mode is in error\n"); - i_err++; - } /* if(data[5]!=0 && data[5]!=1) */ - if (data[8] != 0 && data[8] != 1 && data[2] != 2) { - printk("\nError in selection of functionality\n"); - } /* if(data[8]!=0 && data[8]!=1 && data[2]!=2) */ - if (data[12] == 0 || data[12] == 1) { - if (data[6] != 20 && data[6] != 40 && data[6] != 80 - && data[6] != 160) { - printk("\nThe selection of conversion time reload value is in error\n"); - i_err++; - } /* if (data[6]!=20 && data[6]!=40 && data[6]!=80 && data[6]!=160 ) */ - if (data[7] != 2) { - printk("\nThe selection of conversion time unit is in error\n"); - i_err++; - } /* if(data[7]!=2) */ - } - if (data[9] != 0 && data[9] != 1) { - printk("\nThe selection of interrupt enable is in error\n"); - i_err++; - } /* if(data[9]!=0 && data[9]!=1) */ - if (data[11] < 0 || data[11] > 4) { - printk("\nThe selection of module is in error\n"); - i_err++; - } /* if(data[11] <0 || data[11]>1) */ - if (data[12] < 0 || data[12] > 3) { - printk("\nThe selection of singlechannel/scan selection is in error\n"); - i_err++; - } /* if(data[12] < 0 || data[12]> 3) */ - if (data[13] < 0 || data[13] > 16) { - printk("\nThe selection of number of channels is in error\n"); - i_err++; - } /* if(data[13] <0 ||data[13] >15) */ - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* - i_ChannelCount=data[13]; - i_ScanType=data[12]; - i_ADDIDATAPolarity = data[2]; - i_ADDIDATAGain=data[1]; - i_ADDIDATAConversionTime=data[6]; - i_ADDIDATAConversionTimeUnit=data[7]; - i_ADDIDATAType=data[0]; - */ - - /* Save acquisition configuration for the actual board */ - s_BoardInfos[dev->minor].i_ChannelCount = data[13]; - s_BoardInfos[dev->minor].i_ScanType = data[12]; - s_BoardInfos[dev->minor].i_ADDIDATAPolarity = data[2]; - s_BoardInfos[dev->minor].i_ADDIDATAGain = data[1]; - s_BoardInfos[dev->minor].i_ADDIDATAConversionTime = data[6]; - s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit = data[7]; - s_BoardInfos[dev->minor].i_ADDIDATAType = data[0]; - /* Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - s_BoardInfos[dev->minor].i_ConnectionType = data[5]; - /* End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - /* END JK 06.07.04: Management of sevrals boards */ - - /* Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - memset(s_BoardInfos[dev->minor].ui_ScanValueArray, 0, (7 + 12) * sizeof(unsigned int)); /* 7 is the maximal number of channels */ - /* End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - - /* BEGIN JK 02.07.04 : This while can't be do, it block the process when using severals boards */ - /* while(i_InterruptFlag==1) */ - while (s_BoardInfos[dev->minor].i_InterruptFlag == 1) { -#ifndef MSXBOX - udelay(1); -#else - /* In the case where the driver is compiled for the MSX-Box */ - /* we used a printk to have a little delay because udelay */ - /* seems to be broken under the MSX-Box. */ - /* This solution hat to be studied. */ - printk(""); -#endif - } - /* END JK 02.07.04 : This while can't be do, it block the process when using severals boards */ - - ui_ChannelNo = CR_CHAN(insn->chanspec); /* get the channel */ - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_ChannelNo=ui_ChannelNo; */ - /* ui_Channel_num =ui_ChannelNo; */ - - s_BoardInfos[dev->minor].i_ChannelNo = ui_ChannelNo; - s_BoardInfos[dev->minor].ui_Channel_num = ui_ChannelNo; - - /* END JK 06.07.04: Management of sevrals boards */ - - if (data[5] == 0) { - if (ui_ChannelNo > 15) { - printk("\nThe Selection of the channel is in error\n"); - i_err++; - } /* if(ui_ChannelNo>15) */ - } /* if(data[5]==0) */ - else { - if (data[14] == 2) { - if (ui_ChannelNo > 3) { - printk("\nThe Selection of the channel is in error\n"); - i_err++; - } /* if(ui_ChannelNo>3) */ - } /* if(data[14]==2) */ - else { - if (ui_ChannelNo > 7) { - printk("\nThe Selection of the channel is in error\n"); - i_err++; - } /* if(ui_ChannelNo>7) */ - } /* elseif(data[14]==2) */ - } /* elseif(data[5]==0) */ - if (data[12] == 0 || data[12] == 1) { - switch (data[5]) { - case 0: - if (ui_ChannelNo <= 3) { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Offset=0; */ - s_BoardInfos[dev->minor].i_Offset = 0; - /* END JK 06.07.04: Management of sevrals boards */ - } /* if(ui_ChannelNo <=3) */ - if (ui_ChannelNo >= 4 && ui_ChannelNo <= 7) { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Offset=64; */ - s_BoardInfos[dev->minor].i_Offset = 64; - /* END JK 06.07.04: Management of sevrals boards */ - } /* if(ui_ChannelNo >=4 && ui_ChannelNo <=7) */ - if (ui_ChannelNo >= 8 && ui_ChannelNo <= 11) { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Offset=128; */ - s_BoardInfos[dev->minor].i_Offset = 128; - /* END JK 06.07.04: Management of sevrals boards */ - } /* if(ui_ChannelNo >=8 && ui_ChannelNo <=11) */ - if (ui_ChannelNo >= 12 && ui_ChannelNo <= 15) { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Offset=192; */ - s_BoardInfos[dev->minor].i_Offset = 192; - /* END JK 06.07.04: Management of sevrals boards */ - } /* if(ui_ChannelNo >=12 && ui_ChannelNo <=15) */ - break; - case 1: - if (data[14] == 2) { - if (ui_ChannelNo == 0) { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Offset=0; */ - s_BoardInfos[dev->minor].i_Offset = 0; - /* END JK 06.07.04: Management of sevrals boards */ - } /* if(ui_ChannelNo ==0 ) */ - if (ui_ChannelNo == 1) { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Offset=0; */ - s_BoardInfos[dev->minor].i_Offset = 64; - /* END JK 06.07.04: Management of sevrals boards */ - } /* if(ui_ChannelNo ==1) */ - if (ui_ChannelNo == 2) { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Offset=128; */ - s_BoardInfos[dev->minor].i_Offset = 128; - /* END JK 06.07.04: Management of sevrals boards */ - } /* if(ui_ChannelNo ==2 ) */ - if (ui_ChannelNo == 3) { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Offset=192; */ - s_BoardInfos[dev->minor].i_Offset = 192; - /* END JK 06.07.04: Management of sevrals boards */ - } /* if(ui_ChannelNo ==3) */ - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_ChannelNo=0; */ - s_BoardInfos[dev->minor].i_ChannelNo = 0; - /* END JK 06.07.04: Management of sevrals boards */ - ui_ChannelNo = 0; - break; - } /* if(data[14]==2) */ - if (ui_ChannelNo <= 1) { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Offset=0; */ - s_BoardInfos[dev->minor].i_Offset = 0; - /* END JK 06.07.04: Management of sevrals boards */ - } /* if(ui_ChannelNo <=1) */ - if (ui_ChannelNo >= 2 && ui_ChannelNo <= 3) { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_ChannelNo=i_ChannelNo-2; */ - /* i_Offset=64; */ - s_BoardInfos[dev->minor].i_ChannelNo = - s_BoardInfos[dev->minor].i_ChannelNo - - 2; - s_BoardInfos[dev->minor].i_Offset = 64; - /* END JK 06.07.04: Management of sevrals boards */ - ui_ChannelNo = ui_ChannelNo - 2; - } /* if(ui_ChannelNo >=2 && ui_ChannelNo <=3) */ - if (ui_ChannelNo >= 4 && ui_ChannelNo <= 5) { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_ChannelNo=i_ChannelNo-4; */ - /* i_Offset=128; */ - s_BoardInfos[dev->minor].i_ChannelNo = - s_BoardInfos[dev->minor].i_ChannelNo - - 4; - s_BoardInfos[dev->minor].i_Offset = 128; - /* END JK 06.07.04: Management of sevrals boards */ - ui_ChannelNo = ui_ChannelNo - 4; - } /* if(ui_ChannelNo >=4 && ui_ChannelNo <=5) */ - if (ui_ChannelNo >= 6 && ui_ChannelNo <= 7) { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_ChannelNo=i_ChannelNo-6; */ - /* i_Offset=192; */ - s_BoardInfos[dev->minor].i_ChannelNo = - s_BoardInfos[dev->minor].i_ChannelNo - - 6; - s_BoardInfos[dev->minor].i_Offset = 192; - /* END JK 06.07.04: Management of sevrals boards */ - ui_ChannelNo = ui_ChannelNo - 6; - } /* if(ui_ChannelNo >=6 && ui_ChannelNo <=7) */ - break; - - default: - printk("\n This selection of polarity does not exist\n"); - i_err++; - } /* switch(data[2]) */ - } /* if(data[12]==0 || data[12]==1) */ - else { - switch (data[11]) { - case 1: - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Offset=0; */ - s_BoardInfos[dev->minor].i_Offset = 0; - /* END JK 06.07.04: Management of sevrals boards */ - break; - case 2: - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Offset=64; */ - s_BoardInfos[dev->minor].i_Offset = 64; - /* END JK 06.07.04: Management of sevrals boards */ - break; - case 3: - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Offset=128; */ - s_BoardInfos[dev->minor].i_Offset = 128; - /* END JK 06.07.04: Management of sevrals boards */ - break; - case 4: - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Offset=192; */ - s_BoardInfos[dev->minor].i_Offset = 192; - /* END JK 06.07.04: Management of sevrals boards */ - break; - default: - printk("\nError in module selection\n"); - i_err++; - } /* switch(data[11]) */ - } /* elseif(data[12]==0 || data[12]==1) */ - if (i_err) { - apci3200_reset(dev); - return -EINVAL; - } - /* if(i_ScanType!=1) */ - if (s_BoardInfos[dev->minor].i_ScanType != 1) { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Count=0; */ - /* i_Sum=0; */ - s_BoardInfos[dev->minor].i_Count = 0; - s_BoardInfos[dev->minor].i_Sum = 0; - /* END JK 06.07.04: Management of sevrals boards */ - } /* if(i_ScanType!=1) */ - - ul_Config = - data[1] | (data[2] << 6) | (data[5] << 7) | (data[3] << 8) | - (data[4] << 9); - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* END JK 06.07.04: Management of sevrals boards */ - /*********************************/ - /* Write the channel to configure */ - /*********************************/ - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* outl(0 | ui_ChannelNo , devpriv->iobase+i_Offset + 0x4); */ - outl(0 | ui_ChannelNo, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x4); - /* END JK 06.07.04: Management of sevrals boards */ - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* END JK 06.07.04: Management of sevrals boards */ - /**************************/ - /* Reset the configuration */ - /**************************/ - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* outl(0 , devpriv->iobase+i_Offset + 0x0); */ - outl(0, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x0); - /* END JK 06.07.04: Management of sevrals boards */ - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* END JK 06.07.04: Management of sevrals boards */ - - /***************************/ - /* Write the configuration */ - /***************************/ - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* outl(ul_Config , devpriv->iobase+i_Offset + 0x0); */ - outl(ul_Config, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x0); - /* END JK 06.07.04: Management of sevrals boards */ - - /***************************/ - /*Reset the calibration bit */ - /***************************/ - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* ul_Temp = inl(devpriv->iobase+i_Offset + 12); */ - ul_Temp = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); - /* END JK 06.07.04: Management of sevrals boards */ - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* END JK 06.07.04: Management of sevrals boards */ - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* outl((ul_Temp & 0xFFF9FFFF) , devpriv->iobase+.i_Offset + 12); */ - outl((ul_Temp & 0xFFF9FFFF), - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); - /* END JK 06.07.04: Management of sevrals boards */ - - if (data[9] == 1) { - devpriv->tsk_Current = current; - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_InterruptFlag=1; */ - s_BoardInfos[dev->minor].i_InterruptFlag = 1; - /* END JK 06.07.04: Management of sevrals boards */ - } /* if(data[9]==1) */ - else { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_InterruptFlag=0; */ - s_BoardInfos[dev->minor].i_InterruptFlag = 0; - /* END JK 06.07.04: Management of sevrals boards */ - } /* else if(data[9]==1) */ - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Initialised=1; */ - s_BoardInfos[dev->minor].i_Initialised = 1; - /* END JK 06.07.04: Management of sevrals boards */ - - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* if(i_ScanType==1) */ - if (s_BoardInfos[dev->minor].i_ScanType == 1) - /* END JK 06.07.04: Management of sevrals boards */ - { - /* BEGIN JK 06.07.04: Management of sevrals boards */ - /* i_Sum=i_Sum+1; */ - s_BoardInfos[dev->minor].i_Sum = - s_BoardInfos[dev->minor].i_Sum + 1; - /* END JK 06.07.04: Management of sevrals boards */ - - insn->unused[0] = 0; - apci3200_ai_read(dev, s, insn, &ui_Dummy); - } - - return insn->n; -} - -/* - * Tests the Selected Anlog Input Channel - * - * data[0] = 0 TestAnalogInputShortCircuit - * = 1 TestAnalogInputConnection - * - * data[0] : Digital value obtained - * data[1] : calibration offset - * data[2] : calibration gain - */ -static int apci3200_ai_bits_test(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - struct addi_private *devpriv = dev->private; - unsigned int ui_Configuration = 0; - int i_Temp; /* ,i_TimeUnit; */ - - /* if(i_Initialised==0) */ - - if (s_BoardInfos[dev->minor].i_Initialised == 0) { - apci3200_reset(dev); - return -EINVAL; - } /* if(i_Initialised==0); */ - if (data[0] != 0 && data[0] != 1) { - printk("\nError in selection of functionality\n"); - apci3200_reset(dev); - return -EINVAL; - } /* if(data[0]!=0 && data[0]!=1) */ - - if (data[0] == 1) /* Perform Short Circuit TEST */ - { - /**************************/ - /*Set the short-cicuit bit */ - /**************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor]. - i_Offset + 12) >> 19) & 1) != - 1) ; - /* outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4); */ - outl((0x00001000 | s_BoardInfos[dev->minor].i_ChannelNo), - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 4); - /*************************/ - /*Set the time unit to ns */ - /*************************/ - /* i_TimeUnit= i_ADDIDATAConversionTimeUnit; - i_ADDIDATAConversionTimeUnit= 1; */ - /* i_Temp= i_InterruptFlag ; */ - i_Temp = s_BoardInfos[dev->minor].i_InterruptFlag; - s_BoardInfos[dev->minor].i_InterruptFlag = 0; - i_APCI3200_Read1AnalogInputChannel(dev, s, insn, data); - /* if(i_AutoCalibration == FALSE) */ - if (s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) { - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor]. - i_Offset + - 12) >> 19) & 1) != 1) ; - - /* outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4); */ - outl((0x00001000 | s_BoardInfos[dev->minor]. - i_ChannelNo), - devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 4); - data++; - i_APCI3200_ReadCalibrationOffsetValue(dev, data); - data++; - i_APCI3200_ReadCalibrationGainValue(dev, data); - } - } else { - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor]. - i_Offset + 12) >> 19) & 1) != - 1) ; - /* outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4); */ - outl((0x00000800 | s_BoardInfos[dev->minor].i_ChannelNo), - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 4); - /* ui_Configuration = inl(devpriv->iobase+i_Offset + 0); */ - ui_Configuration = - inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 0); - /*************************/ - /*Set the time unit to ns */ - /*************************/ - /* i_TimeUnit= i_ADDIDATAConversionTimeUnit; - i_ADDIDATAConversionTimeUnit= 1; */ - /* i_Temp= i_InterruptFlag ; */ - i_Temp = s_BoardInfos[dev->minor].i_InterruptFlag; - s_BoardInfos[dev->minor].i_InterruptFlag = 0; - i_APCI3200_Read1AnalogInputChannel(dev, s, insn, data); - /* if(i_AutoCalibration == FALSE) */ - if (s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) { - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor]. - i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4); */ - outl((0x00000800 | s_BoardInfos[dev->minor]. - i_ChannelNo), - devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 4); - data++; - i_APCI3200_ReadCalibrationOffsetValue(dev, data); - data++; - i_APCI3200_ReadCalibrationGainValue(dev, data); - } - } - /* i_InterruptFlag=i_Temp ; */ - s_BoardInfos[dev->minor].i_InterruptFlag = i_Temp; - return insn->n; -} - -static int apci3200_ai_write(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - apci3200_reset(dev); - return insn->n; -} - -static int apci3200_ai_cmdtest(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_cmd *cmd) -{ - - int err = 0; - unsigned int ui_ConvertTime = 0; - unsigned int ui_ConvertTimeBase = 0; - unsigned int ui_DelayTime = 0; - unsigned int ui_DelayTimeBase = 0; - int i_NbrOfChannel = 0; - int i_Cpt = 0; - double d_ConversionTimeForAllChannels = 0.0; - double d_SCANTimeNewUnit = 0.0; - unsigned int arg; - - /* Step 1 : check if triggers are trivially valid */ - - err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW | TRIG_EXT); - err |= cfc_check_trigger_src(&cmd->scan_begin_src, - TRIG_TIMER | TRIG_FOLLOW); - err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_TIMER); - err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT); - err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_COUNT | TRIG_NONE); - - if (s_BoardInfos[dev->minor].i_InterruptFlag == 0) - err |= -EINVAL; - - if (err) { - apci3200_reset(dev); - return 1; - } - - /* Step 2a : make sure trigger sources are unique */ - - err |= cfc_check_trigger_is_unique(&cmd->start_src); - err |= cfc_check_trigger_is_unique(&cmd->scan_begin_src); - err |= cfc_check_trigger_is_unique(&cmd->stop_src); - - /* Step 2b : and mutually compatible */ - - if (err) { - apci3200_reset(dev); - return 2; - } - - /* Step 3: check if arguments are trivially valid */ - - switch (cmd->start_src) { - case TRIG_NOW: - err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0); - break; - case TRIG_EXT: - /* validate the trigger edge selection */ - arg = cmd->start_arg & 0xffff; - if (arg < 1 || arg > 3) { - cmd->start_arg &= ~0xffff; - cmd->start_arg |= 1; - err |= -EINVAL; - } - /* validate the trigger mode selection */ - arg = cmd->start_arg >> 16; - if (arg != 2) { - cmd->start_arg &= ~(0xffff << 16); - cmd->start_arg |= (2 << 16); - err |= -EINVAL; - } - break; - } - - err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len); - - /* i_FirstChannel=cmd->chanlist[0]; */ - s_BoardInfos[dev->minor].i_FirstChannel = cmd->chanlist[0]; - /* i_LastChannel=cmd->chanlist[1]; */ - s_BoardInfos[dev->minor].i_LastChannel = cmd->chanlist[1]; - - if (cmd->convert_src == TRIG_TIMER) { - ui_ConvertTime = cmd->convert_arg & 0xFFFF; - ui_ConvertTimeBase = cmd->convert_arg >> 16; - if (ui_ConvertTime != 20 && ui_ConvertTime != 40 - && ui_ConvertTime != 80 && ui_ConvertTime != 160) - { - printk("\nThe selection of conversion time reload value is in error\n"); - err++; - } /* if (ui_ConvertTime!=20 && ui_ConvertTime!=40 && ui_ConvertTime!=80 && ui_ConvertTime!=160 ) */ - if (ui_ConvertTimeBase != 2) { - printk("\nThe selection of conversion time unit is in error\n"); - err++; - } /* if(ui_ConvertTimeBase!=2) */ - } else { - ui_ConvertTime = 0; - ui_ConvertTimeBase = 0; - } - if (cmd->scan_begin_src == TRIG_FOLLOW) { - ui_DelayTime = 0; - ui_DelayTimeBase = 0; - } /* if(cmd->scan_begin_src==TRIG_FOLLOW) */ - else { - ui_DelayTime = cmd->scan_begin_arg & 0xFFFF; - ui_DelayTimeBase = cmd->scan_begin_arg >> 16; - if (ui_DelayTimeBase != 2 && ui_DelayTimeBase != 3) { - err++; - printk("\nThe Delay time base selection is in error\n"); - } - if (ui_DelayTime < 1 || ui_DelayTime > 1023) { - err++; - printk("\nThe Delay time value is in error\n"); - } - if (err) { - apci3200_reset(dev); - return 3; - } - fpu_begin(); - d_SCANTimeNewUnit = (double)ui_DelayTime; - /* i_NbrOfChannel= i_LastChannel-i_FirstChannel + 4; */ - i_NbrOfChannel = - s_BoardInfos[dev->minor].i_LastChannel - - s_BoardInfos[dev->minor].i_FirstChannel + 4; - /**********************************************************/ - /*calculate the total conversion time for all the channels */ - /**********************************************************/ - d_ConversionTimeForAllChannels = - (double)((double)ui_ConvertTime / - (double)i_NbrOfChannel); - - /*******************************/ - /*Convert the frequence in time */ - /*******************************/ - d_ConversionTimeForAllChannels = - (double)1.0 / d_ConversionTimeForAllChannels; - ui_ConvertTimeBase = 3; - /***********************************/ - /*Test if the time unit is the same */ - /***********************************/ - - if (ui_DelayTimeBase <= ui_ConvertTimeBase) { - - for (i_Cpt = 0; - i_Cpt < (ui_ConvertTimeBase - ui_DelayTimeBase); - i_Cpt++) { - - d_ConversionTimeForAllChannels = - d_ConversionTimeForAllChannels * 1000; - d_ConversionTimeForAllChannels = - d_ConversionTimeForAllChannels + 1; - } - } else { - for (i_Cpt = 0; - i_Cpt < (ui_DelayTimeBase - ui_ConvertTimeBase); - i_Cpt++) { - d_SCANTimeNewUnit = d_SCANTimeNewUnit * 1000; - - } - } - - if (d_ConversionTimeForAllChannels >= d_SCANTimeNewUnit) { - - printk("\nSCAN Delay value cannot be used\n"); - /*********************************/ - /*SCAN Delay value cannot be used */ - /*********************************/ - err++; - } - fpu_end(); - } /* else if(cmd->scan_begin_src==TRIG_FOLLOW) */ - - if (err) { - apci3200_reset(dev); - return 4; - } - - return 0; -} - -static int apci3200_cancel(struct comedi_device *dev, - struct comedi_subdevice *s) -{ - struct addi_private *devpriv = dev->private; - unsigned int ui_Configuration = 0; - - /* i_InterruptFlag=0; */ - /* i_Initialised=0; */ - /* i_Count=0; */ - /* i_Sum=0; */ - s_BoardInfos[dev->minor].i_InterruptFlag = 0; - s_BoardInfos[dev->minor].i_Initialised = 0; - s_BoardInfos[dev->minor].i_Count = 0; - s_BoardInfos[dev->minor].i_Sum = 0; - - /*******************/ - /*Read the register */ - /*******************/ - /* ui_Configuration = inl(devpriv->iobase+i_Offset + 8); */ - ui_Configuration = - inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); - /*****************************/ - /*Reset the START and IRQ bit */ - /*****************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl((ui_Configuration & 0xFFE7FFFF),devpriv->iobase+i_Offset + 8); */ - outl((ui_Configuration & 0xFFE7FFFF), - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); - return 0; -} - -/* - * Does asynchronous acquisition - * Determines the mode 1 or 2. - */ -static int apci3200_ai_cmd(struct comedi_device *dev, - struct comedi_subdevice *s) -{ - struct addi_private *devpriv = dev->private; - struct comedi_cmd *cmd = &s->async->cmd; - unsigned int ui_Configuration = 0; - /* INT i_CurrentSource = 0; */ - unsigned int ui_Trigger = 0; - unsigned int ui_TriggerEdge = 0; - unsigned int ui_Triggermode = 0; - unsigned int ui_ScanMode = 0; - unsigned int ui_ConvertTime = 0; - unsigned int ui_ConvertTimeBase = 0; - unsigned int ui_DelayTime = 0; - unsigned int ui_DelayTimeBase = 0; - unsigned int ui_DelayMode = 0; - - /* i_FirstChannel=cmd->chanlist[0]; */ - /* i_LastChannel=cmd->chanlist[1]; */ - s_BoardInfos[dev->minor].i_FirstChannel = cmd->chanlist[0]; - s_BoardInfos[dev->minor].i_LastChannel = cmd->chanlist[1]; - if (cmd->start_src == TRIG_EXT) { - ui_Trigger = 1; - ui_TriggerEdge = cmd->start_arg & 0xFFFF; - ui_Triggermode = cmd->start_arg >> 16; - } /* if(cmd->start_src==TRIG_EXT) */ - else { - ui_Trigger = 0; - } /* elseif(cmd->start_src==TRIG_EXT) */ - - if (cmd->stop_src == TRIG_COUNT) { - ui_ScanMode = 0; - } /* if (cmd->stop_src==TRIG_COUNT) */ - else { - ui_ScanMode = 2; - } /* else if (cmd->stop_src==TRIG_COUNT) */ - - if (cmd->scan_begin_src == TRIG_FOLLOW) { - ui_DelayTime = 0; - ui_DelayTimeBase = 0; - ui_DelayMode = 0; - } /* if(cmd->scan_begin_src==TRIG_FOLLOW) */ - else { - ui_DelayTime = cmd->scan_begin_arg & 0xFFFF; - ui_DelayTimeBase = cmd->scan_begin_arg >> 16; - ui_DelayMode = 1; - } /* else if(cmd->scan_begin_src==TRIG_FOLLOW) */ - if (cmd->convert_src == TRIG_TIMER) { - ui_ConvertTime = cmd->convert_arg & 0xFFFF; - ui_ConvertTimeBase = cmd->convert_arg >> 16; - } else { - ui_ConvertTime = 0; - ui_ConvertTimeBase = 0; - } - - /* if(i_ADDIDATAType ==1 || ((i_ADDIDATAType==2))) */ - /* { */ - /**************************************************/ - /*Read the old configuration of the current source */ - /**************************************************/ - /* ui_Configuration = inl(devpriv->iobase+i_Offset + 12); */ - ui_Configuration = - inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); - /***********************************************/ - /*Write the configuration of the current source */ - /***********************************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl((ui_Configuration & 0xFFC00000 ), devpriv->iobase+i_Offset +12); */ - outl((ui_Configuration & 0xFFC00000), - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); - /* } */ - ui_Configuration = 0; - - /* ui_Configuration = i_FirstChannel |(i_LastChannel << 8)| 0x00100000 | */ - ui_Configuration = - s_BoardInfos[dev->minor].i_FirstChannel | (s_BoardInfos[dev-> - minor]. - i_LastChannel << 8) | 0x00100000 | (ui_Trigger << 24) | - (ui_TriggerEdge << 25) | (ui_Triggermode << 27) | (ui_DelayMode - << 18) | (ui_ScanMode << 16); - - /*************************/ - /*Write the Configuration */ - /*************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl( ui_Configuration, devpriv->iobase+i_Offset + 0x8); */ - outl(ui_Configuration, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x8); - /***********************/ - /*Write the Delay Value */ - /***********************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(ui_DelayTime,devpriv->iobase+i_Offset + 40); */ - outl(ui_DelayTime, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 40); - /***************************/ - /*Write the Delay time base */ - /***************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(ui_DelayTimeBase,devpriv->iobase+i_Offset + 44); */ - outl(ui_DelayTimeBase, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 44); - /*********************************/ - /*Write the conversion time value */ - /*********************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(ui_ConvertTime,devpriv->iobase+i_Offset + 32); */ - outl(ui_ConvertTime, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); - - /********************************/ - /*Write the conversion time base */ - /********************************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl(ui_ConvertTimeBase,devpriv->iobase+i_Offset + 36); */ - outl(ui_ConvertTimeBase, - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); - /*******************/ - /*Read the register */ - /*******************/ - /* ui_Configuration = inl(devpriv->iobase+i_Offset + 4); */ - ui_Configuration = - inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); - /******************/ - /*Set the SCAN bit */ - /******************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - - /* outl(((ui_Configuration & 0x1E0FF) | 0x00002000),devpriv->iobase+i_Offset + 4); */ - outl(((ui_Configuration & 0x1E0FF) | 0x00002000), - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); - /*******************/ - /*Read the register */ - /*******************/ - ui_Configuration = 0; - /* ui_Configuration = inl(devpriv->iobase+i_Offset + 8); */ - ui_Configuration = - inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); - - /*******************/ - /*Set the START bit */ - /*******************/ - /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ - while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + - 12) >> 19) & 1) != 1) ; - /* outl((ui_Configuration | 0x00080000),devpriv->iobase+i_Offset + 8); */ - outl((ui_Configuration | 0x00080000), - devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); - return 0; -} - -/* - * This function copies the acquired data(from FIFO) to Comedi buffer. - */ -static int i_APCI3200_InterruptHandleEos(struct comedi_device *dev) -{ - struct addi_private *devpriv = dev->private; - struct comedi_subdevice *s = dev->read_subdev; - unsigned int ui_StatusRegister = 0; - - /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - /* comedi_async *async = s->async; */ - /* UINT *data; */ - /* data=async->data+async->buf_int_ptr;//new samples added from here onwards */ - int n = 0, i = 0; - /* END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - - /************************************/ - /*Read the interrupt status register */ - /************************************/ - /* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */ - ui_StatusRegister = - inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 16); - - /*************************/ - /*Test if interrupt occur */ - /*************************/ - - if ((ui_StatusRegister & 0x2) == 0x2) { - /*************************/ - /*Read the channel number */ - /*************************/ - /* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */ - /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - /* This value is not used */ - /* ui_ChannelNumber = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 24); */ - /* END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - - /*************************************/ - /*Read the digital Analog Input value */ - /*************************************/ - - /* data[i_Count] = inl(devpriv->iobase+i_Offset + 28); */ - /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - /* data[s_BoardInfos [dev->minor].i_Count] = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 28); */ - s_BoardInfos[dev->minor].ui_ScanValueArray[s_BoardInfos[dev-> - minor].i_Count] = - inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 28); - /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - - /* if((i_Count == (i_LastChannel-i_FirstChannel+3))) */ - if ((s_BoardInfos[dev->minor].i_Count == - (s_BoardInfos[dev->minor].i_LastChannel - - s_BoardInfos[dev->minor]. - i_FirstChannel + 3))) { - - /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - s_BoardInfos[dev->minor].i_Count++; - - for (i = s_BoardInfos[dev->minor].i_FirstChannel; - i <= s_BoardInfos[dev->minor].i_LastChannel; - i++) { - i_APCI3200_GetChannelCalibrationValue(dev, i, - &s_BoardInfos[dev->minor]. - ui_ScanValueArray[s_BoardInfos[dev-> - minor].i_Count + ((i - - s_BoardInfos - [dev->minor]. - i_FirstChannel) - * 3)], - &s_BoardInfos[dev->minor]. - ui_ScanValueArray[s_BoardInfos[dev-> - minor].i_Count + ((i - - s_BoardInfos - [dev->minor]. - i_FirstChannel) - * 3) + 1], - &s_BoardInfos[dev->minor]. - ui_ScanValueArray[s_BoardInfos[dev-> - minor].i_Count + ((i - - s_BoardInfos - [dev->minor]. - i_FirstChannel) - * 3) + 2]); - } - - /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - - /* i_Count=-1; */ - - s_BoardInfos[dev->minor].i_Count = -1; - - /* async->buf_int_count+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int); */ - /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - /* async->buf_int_count+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int); */ - /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - /* async->buf_int_ptr+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int); */ - /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - /* async->buf_int_ptr+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int); */ - /* comedi_eos(dev,s); */ - - /* Set the event type (Comedi Buffer End Of Scan) */ - s->async->events |= COMEDI_CB_EOS; - - /* Test if enougth memory is available and allocate it for 7 values */ - n = comedi_buf_write_alloc(s, - (7 + 12) * sizeof(unsigned int)); - - /* If not enough memory available, event is set to Comedi Buffer Error */ - if (n > ((7 + 12) * sizeof(unsigned int))) { - printk("\ncomedi_buf_write_alloc n = %i", n); - s->async->events |= COMEDI_CB_ERROR; - } - /* Write all 7 scan values in the comedi buffer */ - comedi_buf_memcpy_to(s, 0, - (unsigned int *) s_BoardInfos[dev->minor]. - ui_ScanValueArray, (7 + 12) * sizeof(unsigned int)); - - /* Update comedi buffer pinters indexes */ - comedi_buf_write_free(s, - (7 + 12) * sizeof(unsigned int)); - - comedi_handle_events(dev, s); - /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - - /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - /* */ - /* if (s->async->buf_int_ptr>=s->async->data_len) // for buffer rool over */ - /* { */ - /* /* buffer rollover */ */ - /* s->async->buf_int_ptr=0; */ - /* comedi_eobuf(dev,s); */ - /* } */ - /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - } - /* i_Count++; */ - s_BoardInfos[dev->minor].i_Count++; - } - /* i_InterruptFlag=0; */ - s_BoardInfos[dev->minor].i_InterruptFlag = 0; - return 0; -} - -static void apci3200_interrupt(int irq, void *d) -{ - struct comedi_device *dev = d; - struct addi_private *devpriv = dev->private; - unsigned int ui_StatusRegister = 0; - unsigned int ui_ChannelNumber = 0; - int i_CalibrationFlag = 0; - int i_CJCFlag = 0; - unsigned int ui_DummyValue = 0; - unsigned int ui_DigitalTemperature = 0; - unsigned int ui_DigitalInput = 0; - int i_ConvertCJCCalibration; - /* BEGIN JK TEST */ - int i_ReturnValue = 0; - /* END JK TEST */ - - /* switch(i_ScanType) */ - switch (s_BoardInfos[dev->minor].i_ScanType) { - case 0: - case 1: - /* switch(i_ADDIDATAType) */ - switch (s_BoardInfos[dev->minor].i_ADDIDATAType) { - case 0: - case 1: - - /************************************/ - /*Read the interrupt status register */ - /************************************/ - /* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */ - ui_StatusRegister = - inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 16); - if ((ui_StatusRegister & 0x2) == 0x2) { - /* i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17); */ - i_CalibrationFlag = - ((inl(devpriv->iobase + - s_BoardInfos[dev-> - minor]. - i_Offset + - 12) & 0x00060000) >> - 17); - /*************************/ - /*Read the channel number */ - /*************************/ - /* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */ - - /*************************************/ - /*Read the digital analog input value */ - /*************************************/ - /* ui_DigitalInput = inl(devpriv->iobase+i_Offset + 28); */ - ui_DigitalInput = - inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 28); - - /***********************************************/ - /* Test if the value read is the channel value */ - /***********************************************/ - if (i_CalibrationFlag == 0) { - /* ui_InterruptChannelValue[i_Count + 0] = ui_DigitalInput; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue - [s_BoardInfos[dev->minor]. - i_Count + 0] = ui_DigitalInput; - - /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - /* - i_APCI3200_GetChannelCalibrationValue (dev, s_BoardInfos [dev->minor].ui_Channel_num, - &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 6], - &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 7], - &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 8]); - */ - /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - - /******************************************************/ - /*Start the conversion of the calibration offset value */ - /******************************************************/ - i_APCI3200_ReadCalibrationOffsetValue - (dev, &ui_DummyValue); - } /* if (i_CalibrationFlag == 0) */ - /**********************************************************/ - /* Test if the value read is the calibration offset value */ - /**********************************************************/ - - if (i_CalibrationFlag == 1) { - - /******************/ - /* Save the value */ - /******************/ - - /* ui_InterruptChannelValue[i_Count + 1] = ui_DigitalInput; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue - [s_BoardInfos[dev->minor]. - i_Count + 1] = ui_DigitalInput; - - /******************************************************/ - /* Start the conversion of the calibration gain value */ - /******************************************************/ - i_APCI3200_ReadCalibrationGainValue(dev, - &ui_DummyValue); - } /* if (i_CalibrationFlag == 1) */ - /******************************************************/ - /*Test if the value read is the calibration gain value */ - /******************************************************/ - - if (i_CalibrationFlag == 2) { - - /****************/ - /*Save the value */ - /****************/ - /* ui_InterruptChannelValue[i_Count + 2] = ui_DigitalInput; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue - [s_BoardInfos[dev->minor]. - i_Count + 2] = ui_DigitalInput; - /* if(i_ScanType==1) */ - if (s_BoardInfos[dev->minor]. - i_ScanType == 1) { - - /* i_InterruptFlag=0; */ - s_BoardInfos[dev->minor]. - i_InterruptFlag = 0; - /* i_Count=i_Count + 6; */ - /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6; */ - s_BoardInfos[dev->minor]. - i_Count = - s_BoardInfos[dev-> - minor].i_Count + 9; - /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - } /* if(i_ScanType==1) */ - else { - /* i_Count=0; */ - s_BoardInfos[dev->minor]. - i_Count = 0; - } /* elseif(i_ScanType==1) */ - /* if(i_ScanType!=1) */ - if (s_BoardInfos[dev->minor]. - i_ScanType != 1) { - i_ReturnValue = send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */ - } /* if(i_ScanType!=1) */ - else { - /* if(i_ChannelCount==i_Sum) */ - if (s_BoardInfos[dev->minor]. - i_ChannelCount == - s_BoardInfos[dev-> - minor].i_Sum) { - send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */ - } - } /* if(i_ScanType!=1) */ - } /* if (i_CalibrationFlag == 2) */ - } /* if ((ui_StatusRegister & 0x2) == 0x2) */ - - break; - - case 2: - /************************************/ - /*Read the interrupt status register */ - /************************************/ - - /* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */ - ui_StatusRegister = - inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 16); - /*************************/ - /*Test if interrupt occur */ - /*************************/ - - if ((ui_StatusRegister & 0x2) == 0x2) { - - /* i_CJCFlag = ((inl(devpriv->iobase+i_Offset + 4) & 0x00000400) >> 10); */ - i_CJCFlag = - ((inl(devpriv->iobase + - s_BoardInfos[dev-> - minor]. - i_Offset + - 4) & 0x00000400) >> 10); - - /* i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17); */ - i_CalibrationFlag = - ((inl(devpriv->iobase + - s_BoardInfos[dev-> - minor]. - i_Offset + - 12) & 0x00060000) >> - 17); - - /*************************/ - /*Read the channel number */ - /*************************/ - - /* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */ - ui_ChannelNumber = - inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 24); - /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - s_BoardInfos[dev->minor].ui_Channel_num = - ui_ChannelNumber; - /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - - /************************************/ - /*Read the digital temperature value */ - /************************************/ - /* ui_DigitalTemperature = inl(devpriv->iobase+i_Offset + 28); */ - ui_DigitalTemperature = - inl(devpriv->iobase + - s_BoardInfos[dev->minor].i_Offset + 28); - - /*********************************************/ - /*Test if the value read is the channel value */ - /*********************************************/ - - if ((i_CalibrationFlag == 0) - && (i_CJCFlag == 0)) { - /* ui_InterruptChannelValue[i_Count + 0]=ui_DigitalTemperature; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue - [s_BoardInfos[dev->minor]. - i_Count + 0] = - ui_DigitalTemperature; - - /*********************************/ - /*Start the conversion of the CJC */ - /*********************************/ - i_APCI3200_ReadCJCValue(dev, - &ui_DummyValue); - - } /* if ((i_CalibrationFlag == 0) && (i_CJCFlag == 0)) */ - - /*****************************************/ - /*Test if the value read is the CJC value */ - /*****************************************/ - - if ((i_CJCFlag == 1) - && (i_CalibrationFlag == 0)) { - /* ui_InterruptChannelValue[i_Count + 3]=ui_DigitalTemperature; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue - [s_BoardInfos[dev->minor]. - i_Count + 3] = - ui_DigitalTemperature; - - /******************************************************/ - /*Start the conversion of the calibration offset value */ - /******************************************************/ - i_APCI3200_ReadCalibrationOffsetValue - (dev, &ui_DummyValue); - } /* if ((i_CJCFlag == 1) && (i_CalibrationFlag == 0)) */ - - /********************************************************/ - /*Test if the value read is the calibration offset value */ - /********************************************************/ - - if ((i_CalibrationFlag == 1) - && (i_CJCFlag == 0)) { - /* ui_InterruptChannelValue[i_Count + 1]=ui_DigitalTemperature; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue - [s_BoardInfos[dev->minor]. - i_Count + 1] = - ui_DigitalTemperature; - - /****************************************************/ - /*Start the conversion of the calibration gain value */ - /****************************************************/ - i_APCI3200_ReadCalibrationGainValue(dev, - &ui_DummyValue); - - } /* if ((i_CalibrationFlag == 1) && (i_CJCFlag == 0)) */ - - /******************************************************/ - /*Test if the value read is the calibration gain value */ - /******************************************************/ - - if ((i_CalibrationFlag == 2) - && (i_CJCFlag == 0)) { - /* ui_InterruptChannelValue[i_Count + 2]=ui_DigitalTemperature; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue - [s_BoardInfos[dev->minor]. - i_Count + 2] = - ui_DigitalTemperature; - - /**********************************************************/ - /*Test if the Calibration channel must be read for the CJC */ - /**********************************************************/ - - /*Test if the polarity is the same */ - /**********************************/ - /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */ - if (s_BoardInfos[dev->minor]. - i_CJCPolarity != - s_BoardInfos[dev->minor]. - i_ADDIDATAPolarity) { - i_ConvertCJCCalibration = 1; - } /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */ - else { - /* if(i_CJCGain==i_ADDIDATAGain) */ - if (s_BoardInfos[dev->minor]. - i_CJCGain == - s_BoardInfos[dev-> - minor]. - i_ADDIDATAGain) { - i_ConvertCJCCalibration - = 0; - } /* if(i_CJCGain==i_ADDIDATAGain) */ - else { - i_ConvertCJCCalibration - = 1; - } /* elseif(i_CJCGain==i_ADDIDATAGain) */ - } /* elseif(i_CJCPolarity!=i_ADDIDATAPolarity) */ - if (i_ConvertCJCCalibration == 1) { - /****************************************************************/ - /*Start the conversion of the calibration gain value for the CJC */ - /****************************************************************/ - i_APCI3200_ReadCJCCalOffset(dev, - &ui_DummyValue); - - } /* if(i_ConvertCJCCalibration==1) */ - else { - /* ui_InterruptChannelValue[i_Count + 4]=0; */ - /* ui_InterruptChannelValue[i_Count + 5]=0; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue - [s_BoardInfos[dev-> - minor].i_Count + - 4] = 0; - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue - [s_BoardInfos[dev-> - minor].i_Count + - 5] = 0; - } /* elseif(i_ConvertCJCCalibration==1) */ - } /* else if ((i_CalibrationFlag == 2) && (i_CJCFlag == 0)) */ - - /********************************************************************/ - /*Test if the value read is the calibration offset value for the CJC */ - /********************************************************************/ - - if ((i_CalibrationFlag == 1) - && (i_CJCFlag == 1)) { - /* ui_InterruptChannelValue[i_Count + 4]=ui_DigitalTemperature; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue - [s_BoardInfos[dev->minor]. - i_Count + 4] = - ui_DigitalTemperature; - - /****************************************************************/ - /*Start the conversion of the calibration gain value for the CJC */ - /****************************************************************/ - i_APCI3200_ReadCJCCalGain(dev, - &ui_DummyValue); - - } /* if ((i_CalibrationFlag == 1) && (i_CJCFlag == 1)) */ - - /******************************************************************/ - /*Test if the value read is the calibration gain value for the CJC */ - /******************************************************************/ - - if ((i_CalibrationFlag == 2) - && (i_CJCFlag == 1)) { - /* ui_InterruptChannelValue[i_Count + 5]=ui_DigitalTemperature; */ - s_BoardInfos[dev->minor]. - ui_InterruptChannelValue - [s_BoardInfos[dev->minor]. - i_Count + 5] = - ui_DigitalTemperature; - - /* if(i_ScanType==1) */ - if (s_BoardInfos[dev->minor]. - i_ScanType == 1) { - - /* i_InterruptFlag=0; */ - s_BoardInfos[dev->minor]. - i_InterruptFlag = 0; - /* i_Count=i_Count + 6; */ - /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6; */ - s_BoardInfos[dev->minor]. - i_Count = - s_BoardInfos[dev-> - minor].i_Count + 9; - /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - } /* if(i_ScanType==1) */ - else { - /* i_Count=0; */ - s_BoardInfos[dev->minor]. - i_Count = 0; - } /* elseif(i_ScanType==1) */ - - /* if(i_ScanType!=1) */ - if (s_BoardInfos[dev->minor]. - i_ScanType != 1) { - send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */ - } /* if(i_ScanType!=1) */ - else { - /* if(i_ChannelCount==i_Sum) */ - if (s_BoardInfos[dev->minor]. - i_ChannelCount == - s_BoardInfos[dev-> - minor].i_Sum) { - send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */ - - } /* if(i_ChannelCount==i_Sum) */ - } /* else if(i_ScanType!=1) */ - } /* if ((i_CalibrationFlag == 2) && (i_CJCFlag == 1)) */ - - } /* else if ((ui_StatusRegister & 0x2) == 0x2) */ - break; - } /* switch(i_ADDIDATAType) */ - break; - case 2: - case 3: - i_APCI3200_InterruptHandleEos(dev); - break; - } /* switch(i_ScanType) */ - return; -} diff --git a/drivers/staging/comedi/drivers/addi_apci_3200.c b/drivers/staging/comedi/drivers/addi_apci_3200.c deleted file mode 100644 index fe6897e..0000000 --- a/drivers/staging/comedi/drivers/addi_apci_3200.c +++ /dev/null @@ -1,125 +0,0 @@ -#include <linux/module.h> -#include <linux/pci.h> - -#include <asm/i387.h> - -#include "../comedidev.h" -#include "comedi_fc.h" -#include "amcc_s5933.h" - -#include "addi-data/addi_common.h" - -static void fpu_begin(void) -{ - kernel_fpu_begin(); -} - -static void fpu_end(void) -{ - kernel_fpu_end(); -} - -#include "addi-data/addi_eeprom.c" -#include "addi-data/hwdrv_apci3200.c" -#include "addi-data/addi_common.c" - -enum apci3200_boardid { - BOARD_APCI3200, - BOARD_APCI3300, -}; - -static const struct addi_board apci3200_boardtypes[] = { - [BOARD_APCI3200] = { - .pc_DriverName = "apci3200", - .i_IorangeBase1 = 256, - .i_PCIEeprom = 1, - .pc_EepromChip = "S5920", - .i_NbrAiChannel = 16, - .i_NbrAiChannelDiff = 8, - .i_AiChannelList = 16, - .i_AiMaxdata = 0x3ffff, - .pr_AiRangelist = &range_apci3200_ai, - .i_NbrDiChannel = 4, - .i_NbrDoChannel = 4, - .ui_MinAcquisitiontimeNs = 10000, - .ui_MinDelaytimeNs = 100000, - .interrupt = apci3200_interrupt, - .reset = apci3200_reset, - .ai_config = apci3200_ai_config, - .ai_read = apci3200_ai_read, - .ai_write = apci3200_ai_write, - .ai_bits = apci3200_ai_bits_test, - .ai_cmdtest = apci3200_ai_cmdtest, - .ai_cmd = apci3200_ai_cmd, - .ai_cancel = apci3200_cancel, - .di_bits = apci3200_di_insn_bits, - .do_bits = apci3200_do_insn_bits, - }, - [BOARD_APCI3300] = { - .pc_DriverName = "apci3300", - .i_IorangeBase1 = 256, - .i_PCIEeprom = 1, - .pc_EepromChip = "S5920", - .i_NbrAiChannelDiff = 8, - .i_AiChannelList = 8, - .i_AiMaxdata = 0x3ffff, - .pr_AiRangelist = &range_apci3300_ai, - .i_NbrDiChannel = 4, - .i_NbrDoChannel = 4, - .ui_MinAcquisitiontimeNs = 10000, - .ui_MinDelaytimeNs = 100000, - .interrupt = apci3200_interrupt, - .reset = apci3200_reset, - .ai_config = apci3200_ai_config, - .ai_read = apci3200_ai_read, - .ai_write = apci3200_ai_write, - .ai_bits = apci3200_ai_bits_test, - .ai_cmdtest = apci3200_ai_cmdtest, - .ai_cmd = apci3200_ai_cmd, - .ai_cancel = apci3200_cancel, - .di_bits = apci3200_di_insn_bits, - .do_bits = apci3200_do_insn_bits, - }, -}; - -static int apci3200_auto_attach(struct comedi_device *dev, - unsigned long context) -{ - const struct addi_board *board = NULL; - - if (context < ARRAY_SIZE(apci3200_boardtypes)) - board = &apci3200_boardtypes[context]; - if (!board) - return -ENODEV; - dev->board_ptr = board; - - return addi_auto_attach(dev, context); -} - -static struct comedi_driver apci3200_driver = { - .driver_name = "addi_apci_3200", - .module = THIS_MODULE, - .auto_attach = apci3200_auto_attach, - .detach = i_ADDI_Detach, -}; - -static int apci3200_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id) -{ - return comedi_pci_auto_config(dev, &apci3200_driver, id->driver_data); -} - -static const struct pci_device_id apci3200_pci_table[] = { - { PCI_VDEVICE(ADDIDATA, 0x3000), BOARD_APCI3200 }, - { PCI_VDEVICE(ADDIDATA, 0x3007), BOARD_APCI3300 }, - { 0 } -}; -MODULE_DEVICE_TABLE(pci, apci3200_pci_table); - -static struct pci_driver apci3200_pci_driver = { - .name = "addi_apci_3200", - .id_table = apci3200_pci_table, - .probe = apci3200_pci_probe, - .remove = comedi_pci_auto_unconfig, -}; -module_comedi_pci_driver(apci3200_driver, apci3200_pci_driver); -- 2.0.3 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
