I've updated my contact details and removed obsolete comments. Signed-off-by: Bernd Porr <mail@xxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/usbdux.c | 59 ++++++++++++++++----------------- 1 file changed, 28 insertions(+), 31 deletions(-) diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 053bc50..24fa9f66 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -1,37 +1,34 @@ /* - comedi/drivers/usbdux.c - Copyright (C) 2003-2007 Bernd Porr, Bernd.Porr@xxxxxxx - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. + * usbdux.c + * Copyright (C) 2003-2014 Bernd Porr, mail@xxxxxxxxxxxxxxx + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ + /* -Driver: usbdux -Description: University of Stirling USB DAQ & INCITE Technology Limited -Devices: [ITL] USB-DUX (usbdux.o) -Author: Bernd Porr <BerndPorr@xxxxxxx> -Updated: 8 Dec 2008 -Status: Stable -Configuration options: - You have to upload firmware with the -i option. The - firmware is usually installed under /usr/share/usb or - /usr/local/share/usb or /lib/firmware. - -Connection scheme for the counter at the digital port: - 0=/CLK0, 1=UP/DOWN0, 2=RESET0, 4=/CLK1, 5=UP/DOWN1, 6=RESET1. - The sampling rate of the counter is approximately 500Hz. - -Please note that under USB2.0 the length of the channel list determines -the max sampling rate. If you sample only one channel you get 8kHz -sampling rate. If you sample two channels you get 4kHz and so on. -*/ + * Driver: usbdux + * Description: University of Stirling USB DAQ & INCITE Technology Limited + * Devices: (ITL) USB-DUX [usbdux] + * Author: Bernd Porr <mail@xxxxxxxxxxxxxxx> + * Updated: 10 Oct 2014 + * Status: Stable + * Connection scheme for the counter at the digital port: + * 0=/CLK0, 1=UP/DOWN0, 2=RESET0, 4=/CLK1, 5=UP/DOWN1, 6=RESET1. + * The sampling rate of the counter is approximately 500Hz. + * + * Note that under USB2.0 the length of the channel list determines + * the max sampling rate. If you sample only one channel you get 8kHz + * sampling rate. If you sample two channels you get 4kHz and so on. + */ + /* * I must give credit here to Chris Baugher who * wrote the driver for AT-MIO-16d. I used some parts of this -- 1.9.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
