Some split lines are less than 80 chars if rejoined, so rejoin them. Reported-by: Joe Perches <joe@xxxxxxxxxxx> Signed-off-by: Mark Einon <mark.einon@xxxxxxxxx> --- drivers/staging/et131x/et131x.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index b976c75..f5459ec 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -3389,7 +3389,8 @@ static void et131x_adjust_link(struct net_device *netdev) et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, ®ister18); et131x_mii_write(adapter, phydev->addr, - PHY_MPHY_CONTROL_REG, register18 | 0x4); + PHY_MPHY_CONTROL_REG, + register18 | 0x4); et131x_mii_write(adapter, phydev->addr, PHY_INDEX_REG, register18 | 0x8402); et131x_mii_write(adapter, phydev->addr, PHY_DATA_REG, @@ -3422,7 +3423,8 @@ static void et131x_adjust_link(struct net_device *netdev) et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, ®ister18); et131x_mii_write(adapter, phydev->addr, - PHY_MPHY_CONTROL_REG, register18 | 0x4); + PHY_MPHY_CONTROL_REG, + register18 | 0x4); et131x_mii_write(adapter, phydev->addr, PHY_INDEX_REG, register18 | 0x8402); et131x_mii_write(adapter, phydev->addr, @@ -3746,8 +3748,7 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) */ /* TRAP();*/ - dev_warn(&adapter->pdev->dev, - "RxDMA_ERR interrupt, error %x\n", + dev_warn(&adapter->pdev->dev, "RxDMA_ERR interrupt, error %x\n", readl(&iomem->txmac.tx_test)); } @@ -3773,8 +3774,7 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) * occur. In a nutshell, the whole Tx path will have to be reset * and re-configured afterwards. */ - dev_warn(&adapter->pdev->dev, - "TXMAC interrupt, error 0x%08x\n", + dev_warn(&adapter->pdev->dev, "TXMAC interrupt, error 0x%08x\n", err); /* If we are debugging, we want to see this error, otherwise we -- 1.7.10.4 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel