This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. This causes the (*do_cmd) to immediately generate a COMEDI_CB_EOA event
without acquiring any data.
This "empty acquisition" async command is not really useful. Validate that the
cmd->stop_arg is >= 1 in the (*do_cmdtest) and remove the "empty acquisition"
code.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/amplc_pci230.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index da1bbce..b5bed0f 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -1679,7 +1679,9 @@ static int pci230_ai_cmdtest(struct comedi_device *dev,
err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
- if (cmd->stop_src == TRIG_NONE)
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+ else /* TRIG_NONE */
err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (cmd->scan_begin_src == TRIG_EXT) {
@@ -1908,13 +1910,6 @@ static void pci230_ai_start(struct comedi_device *dev,
struct comedi_cmd *cmd = &async->cmd;
devpriv->ai_cmd_started = true;
- if (cmd->stop_src == TRIG_COUNT && devpriv->ai_scan_count == 0) {
- /* An empty acquisition! */
- async->events |= COMEDI_CB_EOA;
- pci230_ai_stop(dev, s);
- comedi_event(dev, s);
- return;
- }
/* Enable ADC FIFO trigger level interrupt. */
spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
--
2.0.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
