This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0 for both the analog input and output async commands. The (*do_cmd) for
both subdevices sets up and starts the command without handling the "empty
acquisition". This results in the interrupt functions trying to transfer 0 data
samples.
Validate that the cmd->stop_arg is >= 1 in the (*do_cmdtest) to prevent the
"empty acquisition".
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/dt282x.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c
index 4017fcb..949baae 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -728,11 +728,10 @@ static int dt282x_ai_cmdtest(struct comedi_device *dev,
err |= cfc_check_trigger_arg_min(&cmd->convert_arg, board->ai_speed);
err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
- if (cmd->stop_src == TRIG_COUNT) {
- /* any count is allowed */
- } else { /* TRIG_NONE */
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+ else /* TRIG_EXT | TRIG_NONE */
err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
- }
if (err)
return 3;
@@ -890,11 +889,10 @@ static int dt282x_ao_cmdtest(struct comedi_device *dev,
err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
- if (cmd->stop_src == TRIG_COUNT) {
- /* any count is allowed */
- } else { /* TRIG_NONE */
+ if (cmd->stop_src == TRIG_COUNT)
+ err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+ else /* TRIG_EXT | TRIG_NONE */
err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
- }
if (err)
return 3;
--
2.0.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
