Signed-off-by: navin patidar <navin.patidar@xxxxxxxxx>
---
drivers/staging/rtl8188eu/hal/pwrseq.c | 2 +-
drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h | 341 --------------------
drivers/staging/rtl8188eu/include/pwrseq.h | 341 ++++++++++++++++++++
drivers/staging/rtl8188eu/include/rtl8188e_hal.h | 2 +-
4 files changed, 343 insertions(+), 343 deletions(-)
delete mode 100644 drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h
create mode 100644 drivers/staging/rtl8188eu/include/pwrseq.h
diff --git a/drivers/staging/rtl8188eu/hal/pwrseq.c b/drivers/staging/rtl8188eu/hal/pwrseq.c
index 4c29e63..20dce42 100644
--- a/drivers/staging/rtl8188eu/hal/pwrseq.c
+++ b/drivers/staging/rtl8188eu/hal/pwrseq.c
@@ -18,7 +18,7 @@
*
******************************************************************************/
-#include "Hal8188EPwrSeq.h"
+#include "pwrseq.h"
#include <rtl8188e_hal.h>
/*
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h b/drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h
deleted file mode 100644
index 43db92d..0000000
--- a/drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h
+++ /dev/null
@@ -1,341 +0,0 @@
-
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- *
- ******************************************************************************/
-
-#ifndef __HAL8188EPWRSEQ_H__
-#define __HAL8188EPWRSEQ_H__
-
-#include "pwrseqcmd.h"
-
-/*
- Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd
- There are 6 HW Power States:
- 0: POFF--Power Off
- 1: PDN--Power Down
- 2: CARDEMU--Card Emulation
- 3: ACT--Active Mode
- 4: LPS--Low Power State
- 5: SUS--Suspend
-
- The transision from different states are defined below
- TRANS_CARDEMU_TO_ACT
- TRANS_ACT_TO_CARDEMU
- TRANS_CARDEMU_TO_SUS
- TRANS_SUS_TO_CARDEMU
- TRANS_CARDEMU_TO_PDN
- TRANS_ACT_TO_LPS
- TRANS_LPS_TO_ACT
-
- TRANS_END
-
- PWR SEQ Version: rtl8188E_PwrSeq_V09.h
-*/
-#define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10
-#define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10
-#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10
-#define RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS 10
-#define RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS 10
-#define RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS 10
-#define RTL8188E_TRANS_ACT_TO_LPS_STEPS 15
-#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15
-#define RTL8188E_TRANS_END_STEPS 1
-
-
-#define RTL8188E_TRANS_CARDEMU_TO_ACT \
- /* format
- * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value
- * },
- * comment here
- */ \
- {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1}, \
- /* wait till 0x04[17] = 1 power ready*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0|BIT1, 0}, \
- /* 0x02[1:0] = 0 reset BB*/ \
- {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \
- /*0x24[23] = 2b'01 schmit trigger */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, \
- /* 0x04[15] = 0 disable HWPDN (control by DRV)*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4|BIT3, 0}, \
- /*0x04[12:11] = 2b'00 disable WL suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0}, \
- /*0x04[8] = 1 polling until return 0*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0}, \
- /*wait till 0x04[8] = 0*/ \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, \
- /*LDO normal mode*/ \
- {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \
- /*SDIO Driving*/
-
-#define RTL8188E_TRANS_ACT_TO_CARDEMU \
- /* format
- * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value
- * },
- * comments here
- */ \
- {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \
- /*0x1F[7:0] = 0 turn off RF*/ \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \
- /*LDO Sleep mode*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, \
- /*0x04[9] = 1 turn off MAC by HW state machine*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0}, \
- /*wait till 0x04[9] = 0 polling until return 0 to disable*/
-
-#define RTL8188E_TRANS_CARDEMU_TO_SUS \
- /* format
- * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
- * value },
- * comments here
- */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, BIT3|BIT4, BIT3}, \
- /* 0x04[12:11] = 2b'01enable WL suspend */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3|BIT4}, \
- /* 0x04[12:11] = 2b'11enable WL suspend for PCIe */ \
- {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, 0xFF, BIT7}, \
- /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
- {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, BIT4, 0}, \
- /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
- {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, BIT4, BIT4}, \
- /*Set USB suspend enable local register 0xfe10[4]=1 */ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, \
- /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, \
- /*wait power state to suspend*/
-
-#define RTL8188E_TRANS_SUS_TO_CARDEMU \
- /* format
- * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
- * value },
- * comments here
- */ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, \
- /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, \
- /*wait power state to suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, \
- /*0x04[12:11] = 2b'01enable WL suspend*/
-
-#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \
- /* format
- * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
- * value },
- * comments here
- */ \
- {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \
- /*0x24[23] = 2b'01 schmit trigger */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, BIT3|BIT4, BIT3}, \
- /*0x04[12:11] = 2b'01 enable WL suspend*/ \
- {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, 0xFF, 0}, \
- /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
- {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, BIT4, 0}, \
- /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
- {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \
- /*Set USB suspend enable local register 0xfe10[4]=1 */ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, \
- /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, \
- /*wait power state to suspend*/
-
-#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \
- /* format
- * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
- * value },
- * comments here
- */ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, \
- /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, \
- /*wait power state to suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, \
- /*0x04[12:11] = 2b'01enable WL suspend*/
-
-#define RTL8188E_TRANS_CARDEMU_TO_PDN \
- /* format
- * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
- * value },
- * comments here
- */ \
- {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0}, \
- /* 0x04[16] = 0*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \
- /* 0x04[15] = 1*/
-
-#define RTL8188E_TRANS_PDN_TO_CARDEMU \
- /* format
- * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
- * value },
- * comments here
- */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, \
- /* 0x04[15] = 0*/
-
-/* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */
-#define RTL8188E_TRANS_ACT_TO_LPS \
- /* format
- * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
- * value },
- * comments here
- */ \
- {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
- {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
- /*Should be zero if no packet is transmitting*/ \
- {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
- /*Should be zero if no packet is transmitting*/ \
- {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
- /*Should be zero if no packet is transmitting*/ \
- {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
- /*Should be zero if no packet is transmitting*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0}, \
- /*CCK and OFDM are disabled,and clock are gated*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, \
- PWRSEQ_DELAY_US},/*Delay 1us*/ \
- {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \
- {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0},/*check if removed later*/\
- {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5}, \
- /*Respond TxOK to scheduler*/
-
-
-#define RTL8188E_TRANS_LPS_TO_ACT \
- /* format
- * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
- * value },
- * comments here
- */ \
- {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/ \
- {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/ \
- {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/ \
- {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, \
- /* 0x08[4] = 0 switch TSF to 40M */ \
- {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0}, \
- /* Polling 0x109[7]=0 TSF in 40M */ \
- {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0}, \
- /* 0x29[7:6] = 2b'00 enable BB clock */ \
- {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, \
- /* 0x101[1] = 1 */ \
- {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \
- /* 0x100[7:0] = 0xFF enable WMAC TRX */ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0}, \
- /* 0x02[1:0] = 2b'11 enable BB macro */ \
- {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/
-
-#define RTL8188E_TRANS_END \
- /* format
- * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
- * value },
- * comments here
- */ \
- {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, 0, \
- PWR_CMD_END, 0, 0},
-
-
-extern struct wl_pwr_cfg rtl8188E_power_on_flow
- [RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_radio_off_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_card_disable_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_card_enable_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_suspend_flow[
- RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_resume_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_hwpdn_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_enter_lps_flow
- [RTL8188E_TRANS_ACT_TO_LPS_STEPS + RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_leave_lps_flow
- [RTL8188E_TRANS_LPS_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS];
-
-#endif /* __HAL8188EPWRSEQ_H__ */
diff --git a/drivers/staging/rtl8188eu/include/pwrseq.h b/drivers/staging/rtl8188eu/include/pwrseq.h
new file mode 100644
index 0000000..43db92d
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/pwrseq.h
@@ -0,0 +1,341 @@
+
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __HAL8188EPWRSEQ_H__
+#define __HAL8188EPWRSEQ_H__
+
+#include "pwrseqcmd.h"
+
+/*
+ Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd
+ There are 6 HW Power States:
+ 0: POFF--Power Off
+ 1: PDN--Power Down
+ 2: CARDEMU--Card Emulation
+ 3: ACT--Active Mode
+ 4: LPS--Low Power State
+ 5: SUS--Suspend
+
+ The transision from different states are defined below
+ TRANS_CARDEMU_TO_ACT
+ TRANS_ACT_TO_CARDEMU
+ TRANS_CARDEMU_TO_SUS
+ TRANS_SUS_TO_CARDEMU
+ TRANS_CARDEMU_TO_PDN
+ TRANS_ACT_TO_LPS
+ TRANS_LPS_TO_ACT
+
+ TRANS_END
+
+ PWR SEQ Version: rtl8188E_PwrSeq_V09.h
+*/
+#define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10
+#define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10
+#define RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS 10
+#define RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_ACT_TO_LPS_STEPS 15
+#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15
+#define RTL8188E_TRANS_END_STEPS 1
+
+
+#define RTL8188E_TRANS_CARDEMU_TO_ACT \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value
+ * },
+ * comment here
+ */ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1}, \
+ /* wait till 0x04[17] = 1 power ready*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0|BIT1, 0}, \
+ /* 0x02[1:0] = 0 reset BB*/ \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \
+ /*0x24[23] = 2b'01 schmit trigger */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, \
+ /* 0x04[15] = 0 disable HWPDN (control by DRV)*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4|BIT3, 0}, \
+ /*0x04[12:11] = 2b'00 disable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0}, \
+ /*0x04[8] = 1 polling until return 0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0}, \
+ /*wait till 0x04[8] = 0*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, \
+ /*LDO normal mode*/ \
+ {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \
+ /*SDIO Driving*/
+
+#define RTL8188E_TRANS_ACT_TO_CARDEMU \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value
+ * },
+ * comments here
+ */ \
+ {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \
+ /*0x1F[7:0] = 0 turn off RF*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \
+ /*LDO Sleep mode*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, \
+ /*0x04[9] = 1 turn off MAC by HW state machine*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0}, \
+ /*wait till 0x04[9] = 0 polling until return 0 to disable*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_SUS \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT3|BIT4, BIT3}, \
+ /* 0x04[12:11] = 2b'01enable WL suspend */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3|BIT4}, \
+ /* 0x04[12:11] = 2b'11enable WL suspend for PCIe */ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, 0xFF, BIT7}, \
+ /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
+ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT4, 0}, \
+ /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT4, BIT4}, \
+ /*Set USB suspend enable local register 0xfe10[4]=1 */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, \
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, \
+ /*wait power state to suspend*/
+
+#define RTL8188E_TRANS_SUS_TO_CARDEMU \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, \
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, \
+ /*wait power state to suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, \
+ /*0x04[12:11] = 2b'01enable WL suspend*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \
+ /*0x24[23] = 2b'01 schmit trigger */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT3|BIT4, BIT3}, \
+ /*0x04[12:11] = 2b'01 enable WL suspend*/ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, 0xFF, 0}, \
+ /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
+ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT4, 0}, \
+ /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \
+ /*Set USB suspend enable local register 0xfe10[4]=1 */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, \
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, \
+ /*wait power state to suspend*/
+
+#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, \
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, \
+ /*wait power state to suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, \
+ /*0x04[12:11] = 2b'01enable WL suspend*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_PDN \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0}, \
+ /* 0x04[16] = 0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \
+ /* 0x04[15] = 1*/
+
+#define RTL8188E_TRANS_PDN_TO_CARDEMU \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, \
+ /* 0x04[15] = 0*/
+
+/* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */
+#define RTL8188E_TRANS_ACT_TO_LPS \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
+ {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0}, \
+ /*CCK and OFDM are disabled,and clock are gated*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, \
+ PWRSEQ_DELAY_US},/*Delay 1us*/ \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0},/*check if removed later*/\
+ {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5}, \
+ /*Respond TxOK to scheduler*/
+
+
+#define RTL8188E_TRANS_LPS_TO_ACT \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/ \
+ {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/ \
+ {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/ \
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, \
+ /* 0x08[4] = 0 switch TSF to 40M */ \
+ {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0}, \
+ /* Polling 0x109[7]=0 TSF in 40M */ \
+ {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0}, \
+ /* 0x29[7:6] = 2b'00 enable BB clock */ \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, \
+ /* 0x101[1] = 1 */ \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \
+ /* 0x100[7:0] = 0xFF enable WMAC TRX */ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0}, \
+ /* 0x02[1:0] = 2b'11 enable BB macro */ \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/
+
+#define RTL8188E_TRANS_END \
+ /* format
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk,
+ * value },
+ * comments here
+ */ \
+ {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, 0, \
+ PWR_CMD_END, 0, 0},
+
+
+extern struct wl_pwr_cfg rtl8188E_power_on_flow
+ [RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_radio_off_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_card_disable_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_card_enable_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_suspend_flow[
+ RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_resume_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_hwpdn_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_enter_lps_flow
+ [RTL8188E_TRANS_ACT_TO_LPS_STEPS + RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_leave_lps_flow
+ [RTL8188E_TRANS_LPS_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS];
+
+#endif /* __HAL8188EPWRSEQ_H__ */
diff --git a/drivers/staging/rtl8188eu/include/rtl8188e_hal.h b/drivers/staging/rtl8188eu/include/rtl8188e_hal.h
index 2c517ce..42ab1d2 100644
--- a/drivers/staging/rtl8188eu/include/rtl8188e_hal.h
+++ b/drivers/staging/rtl8188eu/include/rtl8188e_hal.h
@@ -29,7 +29,7 @@
#include "rtl8188e_recv.h"
#include "rtl8188e_xmit.h"
#include "rtl8188e_cmd.h"
-#include "Hal8188EPwrSeq.h"
+#include "pwrseq.h"
#include "rtw_efuse.h"
#include "rtw_sreset.h"
#include "odm_precomp.h"
--
1.7.10.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
