This patch completes two final matters of cleanup which are each too small
for their own patch. It corrects a couple of indentation issues and
removes a return statement at the end of a void function.
Signed-off-by: Chase Southwood <chase.southwood@xxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
---
.../staging/comedi/drivers/addi-data/hwdrv_apci1500.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
index d98636b..e637be1 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
@@ -986,7 +986,7 @@ static int apci1500_timer_config(struct comedi_device *dev,
devpriv->tsk_Current = current;
-/* Selection of the input clock */
+ /* Selection of the input clock */
if (data[0] == 0 || data[0] == 1 || data[0] == 2) {
outw(data[0], devpriv->i_IobaseAddon + APCI1500_CLK_SELECT);
} else {
@@ -2180,7 +2180,6 @@ static void apci1500_interrupt(int irq, void *d)
"Interrupt from unknown source\n");
}
- return;
}
static int apci1500_reset(struct comedi_device *dev)
@@ -2329,36 +2328,36 @@ static int apci1500_reset(struct comedi_device *dev)
outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* reset all the digital outputs */
outw(0x0, devpriv->i_IobaseAddon + APCI1500_DIGITAL_OP);
-/* Disable the board interrupt */
+ /* Disable the board interrupt */
/* Selects the master interrupt control register */
outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
-/* Deactivates all interrupts */
+ /* Deactivates all interrupts */
outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of port A */
outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
-/* Deactivates all interrupts */
+ /* Deactivates all interrupts */
outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of port B */
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
-/* Deactivates all interrupts */
+ /* Deactivates all interrupts */
outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of timer 1 */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
-/* Deactivates all interrupts */
+ /* Deactivates all interrupts */
outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of timer 2 */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
-/* Deactivates all interrupts */
+ /* Deactivates all interrupts */
outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
-/* Selects the command and status register of timer 3*/
+ /* Selects the command and status register of timer 3*/
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
-/* Deactivates all interrupts */
+ /* Deactivates all interrupts */
outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
return 0;
}
--
2.1.0
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
