Signed-off-by: Chase Southwood <chase.southwood@xxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
---
.../comedi/drivers/addi-data/hwdrv_apci1500.c | 249 ++++++++++-----------
1 file changed, 123 insertions(+), 126 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
index 3cc827e..031882e 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
@@ -172,17 +172,17 @@ static int apci1500_di_config(struct comedi_device *dev,
if (data[0] == 1) {
i_MaxChannel = 8;
- } /* if (data[0] == 1) */
+ }
else {
if (data[0] == 2) {
i_MaxChannel = 6;
- } /* if(data[0]==2) */
+ }
else {
dev_warn(dev->hw_dev,
"The specified port event does not exist\n");
return -EINVAL;
- } /* else if(data[0]==2) */
- } /* else if (data[0] == 1) */
+ }
+ }
switch (data[1]) {
case 0:
data[1] = APCI1500_AND;
@@ -197,7 +197,7 @@ static int apci1500_di_config(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"The specified interrupt logic does not exist\n");
return -EINVAL;
- } /* switch(data[1]); */
+ }
i_Logic = data[1];
for (i_Count = i_MaxChannel, i = 0; i_Count > 0; i_Count--, i++) {
@@ -242,8 +242,8 @@ static int apci1500_di_config(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"The option indicated in the event mask does not exist\n");
return -EINVAL;
- } /* switch(i_EventMask) */
- } /* for (i_Count = i_MaxChannel; i_Count >0;i_Count --) */
+ }
+ }
if (data[0] == 1) {
/* Test the interrupt logic */
@@ -259,7 +259,7 @@ static int apci1500_di_config(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"Transition error on an OR PRIORITY logic\n");
return -EINVAL;
- } /* if (data[1]== APCI1500_OR_PRIORITY && i_PatternTransition != 0) */
+ }
/* Tests if more than one transition */
/* was declared for an AND logic */
@@ -271,14 +271,14 @@ static int apci1500_di_config(struct comedi_device *dev,
((i_PatternTransition >>
i_Count) & 0x1);
- } /* for (i_Count = 0; i_Count < 8; i_Count++) */
+ }
if (i_PatternTransitionCount > 1) {
dev_warn(dev->hw_dev,
"Transition error on an AND logic\n");
return -EINVAL;
- } /* if (i_PatternTransitionCount > 1) */
- } /* if (data[1]== APCI1500_AND) */
+ }
+ }
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
@@ -347,13 +347,13 @@ static int apci1500_di_config(struct comedi_device *dev,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY) */
+ }
else {
dev_warn(dev->hw_dev,
"The choice for interrupt logic does not exist\n");
return -EINVAL;
- } /* else }// if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY) */
- } /* if (data[0]== 1) */
+ }
+ }
/* Test if event setting for port 2 */
@@ -448,13 +448,13 @@ static int apci1500_di_config(struct comedi_device *dev,
outb(0xF4,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if (data[1] == APCI1500_OR) */
+ }
else {
dev_warn(dev->hw_dev,
"The choice for interrupt logic does not exist\n");
return -EINVAL;
- } /* elseif (data[1] == APCI1500_OR) */
- } /* if(data[0]==2) */
+ }
+ }
return insn->n;
}
@@ -518,13 +518,13 @@ static int apci1500_di_write(struct comedi_device *dev,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if(i_Event1Status==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Event 1 not initialised\n");
return -EINVAL;
- } /* else if(i_Event1Status==1) */
- } /* if (data[1]==1) */
+ }
+ }
if (data[1] == 2) {
if (i_Event2Status == 1) {
@@ -555,19 +555,19 @@ static int apci1500_di_write(struct comedi_device *dev,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_Event2InterruptStatus = 1;
- } /* if(i_Event2Status==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Event 2 not initialised\n");
return -EINVAL;
- } /* else if(i_Event2Status==1) */
- } /* if(data[1]==2) */
- } /* if (data[1] == 1 || data[0] == 2) */
+ }
+ }
+ }
else {
dev_warn(dev->hw_dev,
"The port parameter is in error\n");
return -EINVAL;
- } /* else if (data[1] == 1 || data[0] == 2) */
+ }
break;
@@ -600,13 +600,13 @@ static int apci1500_di_write(struct comedi_device *dev,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_Event1InterruptStatus = 0;
- } /* if(i_Event1Status==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Event 1 not initialised\n");
return -EINVAL;
- } /* else if(i_Event1Status==1) */
- } /* if (data[1]==1) */
+ }
+ }
if (data[1] == 2) {
/* Test if event initialised */
if (i_Event2Status == 1) {
@@ -630,26 +630,26 @@ static int apci1500_di_write(struct comedi_device *dev,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_Event2InterruptStatus = 0;
- } /* if(i_Event2Status==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Event 2 not initialised\n");
return -EINVAL;
- } /* else if(i_Event2Status==1) */
- } /* if(data[1]==2) */
+ }
+ }
- } /* if (data[1] == 1 || data[1] == 2) */
+ }
else {
dev_warn(dev->hw_dev,
"The port parameter is in error\n");
return -EINVAL;
- } /* else if (data[1] == 1 || data[1] == 2) */
+ }
break;
default:
dev_warn(dev->hw_dev,
"The option of START/STOP logic does not exist\n");
return -EINVAL;
- } /* switch(data[0]) */
+ }
return insn->n;
}
@@ -843,7 +843,7 @@ static int apci1500_do_write(struct comedi_device *dev,
data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
outw(data[0],
devpriv->i_IobaseAddon + APCI1500_DIGITAL_OP);
- } /* if(data[1]==0) */
+ }
else {
if (data[1] == 1) {
switch (ui_NoOfChannel) {
@@ -875,19 +875,19 @@ static int apci1500_do_write(struct comedi_device *dev,
"chan spec wrong\n");
return -EINVAL; /* "sorry channel spec wrong " */
- } /* switch(ui_NoOfChannels) */
+ }
outw(data[0],
devpriv->i_IobaseAddon +
APCI1500_DIGITAL_OP);
- } /* if(data[1]==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Specified channel not supported\n");
return -EINVAL;
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==0) */
+ }
+ }
+ }
else {
if (data[3] == 1) {
if (data[1] == 0) {
@@ -902,7 +902,7 @@ static int apci1500_do_write(struct comedi_device *dev,
outw(data[0],
devpriv->i_IobaseAddon +
APCI1500_DIGITAL_OP);
- } /* if(data[1]==0) */
+ }
else {
if (data[1] == 1) {
switch (ui_NoOfChannel) {
@@ -954,25 +954,25 @@ static int apci1500_do_write(struct comedi_device *dev,
"chan spec wrong\n");
return -EINVAL; /* "sorry channel spec wrong " */
- } /* switch(ui_NoOfChannels) */
+ }
outw(data[0],
devpriv->i_IobaseAddon +
APCI1500_DIGITAL_OP);
- } /* if(data[1]==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Specified channel not supported\n");
return -EINVAL;
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==1); */
+ }
+ }
+ }
else {
dev_warn(dev->hw_dev,
"Specified functionality does not exist\n");
return -EINVAL;
- } /* if else data[3]==1) */
- } /* if else data[3]==0) */
+ }
+ }
ui_Temp = data[0];
return insn->n;
}
@@ -1004,14 +1004,14 @@ static int apci1500_timer_config(struct comedi_device *dev,
/* Selection of the input clock */
if (data[0] == 0 || data[0] == 1 || data[0] == 2) {
outw(data[0], devpriv->i_IobaseAddon + APCI1500_CLK_SELECT);
- } /* if(data[0]==0||data[0]==1||data[0]==2) */
+ }
else {
if (data[0] != 3) {
dev_warn(dev->hw_dev,
"The option for input clock selection does not exist\n");
return -EINVAL;
- } /* if(data[0]!=3) */
- } /* elseif(data[0]==0||data[0]==1||data[0]==2) */
+ }
+ }
/* Select the counter/timer */
switch (data[1]) {
case COUNTER1:
@@ -1027,7 +1027,7 @@ static int apci1500_timer_config(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"This choice is not a timer nor a counter\n");
return -EINVAL;
- } /* switch(data[2]) */
+ }
/* Selecting single or continuous mode */
switch (data[4]) {
@@ -1041,7 +1041,7 @@ static int apci1500_timer_config(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"This option for single/continuous mode does not exist\n");
return -EINVAL;
- } /* switch(data[4]) */
+ }
i_TimerCounterMode = data[2] | data[4] | 7;
/* Test the reload value */
@@ -1132,18 +1132,18 @@ static int apci1500_timer_config(struct comedi_device *dev,
outb(0x2,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
+ }
else {
dev_warn(dev->hw_dev,
"Error in selection of interrupt enable or disable\n");
return -EINVAL;
- } /* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
- } /* if ((data[3]>= 0) && (data[3] <= 65535)) */
+ }
+ }
else {
dev_warn(dev->hw_dev,
"Error in selection of reload value\n");
return -EINVAL;
- } /* else if ((data[3]>= 0) && (data[3] <= 65535)) */
+ }
i_TimerCounterWatchdogInterrupt = data[7];
i_TimerCounter1Init = 1;
break;
@@ -1160,7 +1160,7 @@ static int apci1500_timer_config(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"This choice is not a timer nor a counter\n");
return -EINVAL;
- } /* switch(data[2]) */
+ }
/* Selecting single or continuous mode */
switch (data[4]) {
@@ -1174,7 +1174,7 @@ static int apci1500_timer_config(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"This option for single/continuous mode does not exist\n");
return -EINVAL;
- } /* switch(data[4]) */
+ }
/* Selecting software or hardware trigger */
switch (data[5]) {
@@ -1188,7 +1188,7 @@ static int apci1500_timer_config(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"This choice for software or hardware trigger does not exist\n");
return -EINVAL;
- } /* switch(data[5]) */
+ }
/* Selecting software or hardware gate */
switch (data[6]) {
@@ -1202,7 +1202,7 @@ static int apci1500_timer_config(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"This choice for software or hardware gate does not exist\n");
return -EINVAL;
- } /* switch(data[6]) */
+ }
i_TimerCounterMode = data[2] | data[4] | data[5] | data[6] | 7;
@@ -1294,18 +1294,18 @@ static int apci1500_timer_config(struct comedi_device *dev,
outb(0x2,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
+ }
else {
dev_warn(dev->hw_dev,
"Error in selection of interrupt enable or disable\n");
return -EINVAL;
- } /* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
- } /* if ((data[3]>= 0) && (data[3] <= 65535)) */
+ }
+ }
else {
dev_warn(dev->hw_dev,
"Error in selection of reload value\n");
return -EINVAL;
- } /* else if ((data[3]>= 0) && (data[3] <= 65535)) */
+ }
i_TimerCounterWatchdogInterrupt = data[7];
i_TimerCounter2Init = 1;
break;
@@ -1322,7 +1322,7 @@ static int apci1500_timer_config(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"This choice is not a watchdog nor a counter\n");
return -EINVAL;
- } /* switch(data[2]) */
+ }
/* Selecting single or continuous mode */
switch (data[4]) {
@@ -1336,7 +1336,7 @@ static int apci1500_timer_config(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"This option for single/continuous mode does not exist\n");
return -EINVAL;
- } /* switch(data[4]) */
+ }
/* Selecting software or hardware gate */
switch (data[6]) {
@@ -1350,7 +1350,7 @@ static int apci1500_timer_config(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"This choice for software or hardware gate does not exist\n");
return -EINVAL;
- } /* switch(data[6]) */
+ }
/* Test if used for watchdog */
@@ -1359,10 +1359,10 @@ static int apci1500_timer_config(struct comedi_device *dev,
/* - Enables retrigger */
/* - Pulses output */
i_TimerCounterMode = data[2] | data[4] | 0x54;
- } /* if (data[2] == APCI1500_WATCHDOG) */
+ }
else {
i_TimerCounterMode = data[2] | data[4] | data[6] | 7;
- } /* elseif (data[2] == APCI1500_WATCHDOG) */
+ }
/* Test the reload value */
if ((data[3] >= 0) && (data[3] <= 65535)) {
@@ -1454,20 +1454,20 @@ static int apci1500_timer_config(struct comedi_device *dev,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* elseif(data[2]==APCI1500_COUNTER) */
+ }
- } /* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
+ }
else {
dev_warn(dev->hw_dev,
"Error in selection of interrupt enable or disable\n");
return -EINVAL;
- } /* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
- } /* if ((data[3]>= 0) && (data[3] <= 65535)) */
+ }
+ }
else {
dev_warn(dev->hw_dev,
"Error in selection of reload value\n");
return -EINVAL;
- } /* else if ((data[3]>= 0) && (data[3] <= 65535)) */
+ }
i_TimerCounterWatchdogInterrupt = data[7];
i_WatchdogCounter3Init = 1;
break;
@@ -1476,7 +1476,7 @@ static int apci1500_timer_config(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"The specified counter/timer option does not exist\n");
return -EINVAL;
- } /* switch(data[1]) */
+ }
i_CounterLogic = data[2];
return insn->n;
}
@@ -1515,7 +1515,7 @@ static int apci1500_timer_write(struct comedi_device *dev,
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_TimerCounter1Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Counter/Timer1 not configured\n");
@@ -1543,12 +1543,12 @@ static int apci1500_timer_write(struct comedi_device *dev,
/* Set Trigger and gate */
i_CommandAndStatusValue = 0x6;
- } /* if( i_TimerCounter1Enabled==1) */
+ }
else {
/* Set Trigger */
i_CommandAndStatusValue = 0x2;
- } /* elseif(i_TimerCounter1Enabled==1) */
+ }
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
@@ -1557,7 +1557,7 @@ static int apci1500_timer_write(struct comedi_device *dev,
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_TimerCounter1Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Counter/Timer1 not configured\n");
@@ -1569,7 +1569,7 @@ static int apci1500_timer_write(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"The specified option for start/stop/trigger does not exist\n");
return -EINVAL;
- } /* switch(data[1]) */
+ }
break;
case COUNTER2:
@@ -1590,7 +1590,7 @@ static int apci1500_timer_write(struct comedi_device *dev,
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_TimerCounter2Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Counter/Timer2 not configured\n");
@@ -1617,12 +1617,12 @@ static int apci1500_timer_write(struct comedi_device *dev,
/* Set Trigger and gate */
i_CommandAndStatusValue = 0x6;
- } /* if( i_TimerCounter2Enabled==1) */
+ }
else {
/* Set Trigger */
i_CommandAndStatusValue = 0x2;
- } /* elseif(i_TimerCounter2Enabled==1) */
+ }
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
@@ -1631,7 +1631,7 @@ static int apci1500_timer_write(struct comedi_device *dev,
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_TimerCounter2Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Counter/Timer2 not configured\n");
@@ -1642,7 +1642,7 @@ static int apci1500_timer_write(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"The specified option for start/stop/trigger does not exist\n");
return -EINVAL;
- } /* switch(data[1]) */
+ }
break;
case COUNTER3:
switch (data[1]) {
@@ -1664,7 +1664,7 @@ static int apci1500_timer_write(struct comedi_device *dev,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_WatchdogCounter3init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Watchdog/Counter3 not configured\n");
@@ -1694,12 +1694,12 @@ static int apci1500_timer_write(struct comedi_device *dev,
/* Set Trigger and gate */
i_CommandAndStatusValue = 0x6;
- } /* if( i_WatchdogCounter3Enabled==1) */
+ }
else {
/* Set Trigger */
i_CommandAndStatusValue = 0x2;
- } /* elseif(i_WatchdogCounter3Enabled==1) */
+ }
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
@@ -1708,7 +1708,7 @@ static int apci1500_timer_write(struct comedi_device *dev,
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_WatchdogCounter3Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Counter3 not configured\n");
@@ -1726,7 +1726,7 @@ static int apci1500_timer_write(struct comedi_device *dev,
outb(0x6,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_WatchdogCounter3Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Watchdog 3 not configured\n");
@@ -1737,19 +1737,19 @@ static int apci1500_timer_write(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"Wrong choice of watchdog/counter3\n");
return -EINVAL;
- } /* switch(data[2]) */
+ }
break;
default:
dev_warn(dev->hw_dev,
"The specified option for start/stop/trigger does not exist\n");
return -EINVAL;
- } /* switch(data[1]) */
+ }
break;
default:
dev_warn(dev->hw_dev,
"The specified choice for counter/watchdog/timer does not exist\n");
return -EINVAL;
- } /* switch(data[0]) */
+ }
return insn->n;
}
@@ -1774,12 +1774,12 @@ static int apci1500_timer_bits(struct comedi_device *dev,
/* Set RCC and gate */
i_CommandAndStatusValue = 0xC;
- } /* if( i_TimerCounter1Init==1) */
+ }
else {
/* Set RCC */
i_CommandAndStatusValue = 0x8;
- } /* elseif(i_TimerCounter1Init==1) */
+ }
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
@@ -1804,12 +1804,12 @@ static int apci1500_timer_bits(struct comedi_device *dev,
data[0] =
data[0] | inb(devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_TimerCounter1Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Timer/Counter1 not configured\n");
return -EINVAL;
- } /* elseif( i_TimerCounter1Init==1) */
+ }
break;
case COUNTER2:
/* Read counter/timer2 */
@@ -1818,12 +1818,12 @@ static int apci1500_timer_bits(struct comedi_device *dev,
/* Set RCC and gate */
i_CommandAndStatusValue = 0xC;
- } /* if( i_TimerCounter2Init==1) */
+ }
else {
/* Set RCC */
i_CommandAndStatusValue = 0x8;
- } /* elseif(i_TimerCounter2Init==1) */
+ }
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
@@ -1853,7 +1853,7 @@ static int apci1500_timer_bits(struct comedi_device *dev,
dev_warn(dev->hw_dev,
"Timer/Counter2 not configured\n");
return -EINVAL;
- } /* elseif( i_TimerCounter2Init==1) */
+ }
break;
case COUNTER3:
/* Read counter/watchdog2 */
@@ -1862,12 +1862,12 @@ static int apci1500_timer_bits(struct comedi_device *dev,
/* Set RCC and gate */
i_CommandAndStatusValue = 0xC;
- } /* if( i_TimerCounter2Init==1) */
+ }
else {
/* Set RCC */
i_CommandAndStatusValue = 0x8;
- } /* elseif(i_WatchdogCounter3Init==1) */
+ }
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
@@ -1892,18 +1892,18 @@ static int apci1500_timer_bits(struct comedi_device *dev,
data[0] =
data[0] | inb(devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_WatchdogCounter3Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"WatchdogCounter3 not configured\n");
return -EINVAL;
- } /* elseif( i_WatchdogCounter3Init==1) */
+ }
break;
default:
dev_warn(dev->hw_dev,
"The choice of timer/counter/watchdog does not exist\n");
return -EINVAL;
- } /* switch(data[0]) */
+ }
return insn->n;
}
@@ -1942,17 +1942,17 @@ static int apci1500_do_bits(struct comedi_device *dev,
outl(0x0, devpriv->i_IobaseAmcc + 0x38);
if (data[0] == 1) {
i_Constant = 0xC0;
- } /* if(data[0]==1) */
+ }
else {
if (data[0] == 0) {
i_Constant = 0x00;
- } /* if{data[0]==0) */
+ }
else {
dev_warn(dev->hw_dev,
"The parameter passed to driver is in error for enabling the voltage interrupt\n");
return -EINVAL;
- } /* else if(data[0]==0) */
- } /* elseif(data[0]==1) */
+ }
+ }
/* Selects the mode specification register of port B */
outb(APCI1500_RW_PORT_B_SPECIFICATION,
@@ -2067,10 +2067,7 @@ static void apci1500_interrupt(int irq, void *d)
if ((ui_InterruptStatus & 0x800000) == 0x800000) {
/* Disable all Interrupt */
/* Selects the master interrupt control register */
- /* outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER); */
/* Disables the main interrupt on the board */
- /* outb(0x00,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER); */
-
/* Selects the command and status register of port A */
outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
@@ -2105,11 +2102,11 @@ static void apci1500_interrupt(int irq, void *d)
i_InputChannel = 1 + (i_RegValue >> 1);
- } /* if(i_Logic==APCI1500_OR_PRIORITY) */
+ }
else {
i_InputChannel = 0;
- } /* elseif(i_Logic==APCI1500_OR_PRIORITY) */
- } /* if ((i_RegValue & 0x60) == 0x60) */
+ }
+ }
/* Selects the command and status register of port B */
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS,
@@ -2142,17 +2139,17 @@ static void apci1500_interrupt(int irq, void *d)
if (i_RegValue & 0x80) {
i_InterruptMask =
i_InterruptMask | 0x40;
- } /* if (i_RegValue & 0x80) */
+ }
if (i_RegValue & 0x40) {
i_InterruptMask =
i_InterruptMask | 0x80;
- } /* if (i_RegValue & 0x40) */
- } /* if (i_RegValue) */
+ }
+ }
else {
i_InterruptMask = i_InterruptMask | 2;
- } /* if (i_RegValue) */
- } /* if ((i_RegValue & 0x60) == 0x60) */
+ }
+ }
/* Selects the command and status register of timer 1 */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
@@ -2170,7 +2167,7 @@ static void apci1500_interrupt(int irq, void *d)
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_InterruptMask = i_InterruptMask | 4;
- } /* if ((i_RegValue & 0x60) == 0x60) */
+ }
/* Selects the command and status register of timer 2 */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
@@ -2187,7 +2184,7 @@ static void apci1500_interrupt(int irq, void *d)
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_InterruptMask = i_InterruptMask | 8;
- } /* if ((i_RegValue & 0x60) == 0x60) */
+ }
/* Selects the command and status register of timer 3 */
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
@@ -2208,7 +2205,7 @@ static void apci1500_interrupt(int irq, void *d)
i_InterruptMask = i_InterruptMask | 0x10;
else
i_InterruptMask = i_InterruptMask | 0x20;
- } /* if ((i_RegValue & 0x60) == 0x60) */
+ }
send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */
/* Enable all Interrupts */
@@ -2218,12 +2215,12 @@ static void apci1500_interrupt(int irq, void *d)
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Authorizes the main interrupt on the board */
outb(0xD0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
- } /* if ((ui_InterruptStatus & 0x800000) == 0x800000) */
+ }
else {
dev_warn(dev->hw_dev,
"Interrupt from unknown source\n");
- } /* else if ((ui_InterruptStatus & 0x800000) == 0x800000) */
+ }
return;
}
--
2.1.0
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
