Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/pcl818.c | 33 +++++++++++----------------------
1 file changed, 11 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index 000dbf8..36c7751 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -319,7 +319,6 @@ struct pcl818_private {
unsigned int act_chanlist_len; /* how long is actual MUX list */
unsigned int act_chanlist_pos; /* actual position in MUX list */
unsigned int ai_data_len; /* len of data buffer */
- unsigned int ao_readback[2];
unsigned int divisor1;
unsigned int divisor2;
unsigned int usefifo:1;
@@ -937,32 +936,18 @@ static int pcl818_ao_insn_write(struct comedi_device *dev,
struct comedi_insn *insn,
unsigned int *data)
{
- struct pcl818_private *devpriv = dev->private;
unsigned int chan = CR_CHAN(insn->chanspec);
+ unsigned int val = s->readback[chan];
int i;
for (i = 0; i < insn->n; i++) {
- devpriv->ao_readback[chan] = data[i];
- outb((data[i] & 0x000f) << 4,
+ val = data[i];
+ outb((val & 0x000f) << 4,
dev->iobase + PCL818_AO_LSB_REG(chan));
- outb((data[i] & 0x0ff0) >> 4,
+ outb((val & 0x0ff0) >> 4,
dev->iobase + PCL818_AO_MSB_REG(chan));
}
-
- return insn->n;
-}
-
-static int pcl818_ao_insn_read(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
-{
- struct pcl818_private *devpriv = dev->private;
- unsigned int chan = CR_CHAN(insn->chanspec);
- int i;
-
- for (i = 0; i < insn->n; i++)
- data[i] = devpriv->ao_readback[chan];
+ s->readback[chan] = val;
return insn->n;
}
@@ -1172,8 +1157,6 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
s->n_chan = board->n_aochan;
s->maxdata = 0x0fff;
s->range_table = &range_unipolar5;
- s->insn_read = pcl818_ao_insn_read;
- s->insn_write = pcl818_ao_insn_write;
if (board->is_818) {
if ((it->options[4] == 1) || (it->options[4] == 10))
s->range_table = &range_unipolar10;
@@ -1185,6 +1168,12 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (it->options[5] == 2)
s->range_table = &range_unknown;
}
+ s->insn_write = pcl818_ao_insn_write;
+ s->insn_read = comedi_readback_insn_read;
+
+ ret = comedi_alloc_subdev_readback(s);
+ if (ret)
+ return ret;
} else {
s->type = COMEDI_SUBD_UNUSED;
}
--
2.0.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
