Greetings,
0day kernel testing robot got the below dmesg and the first bad commit is
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
commit 9ad2e2e1d6506252f31a142a9b04121992af25e3
Author: Jonathan Cameron <jic23@xxxxxxxxx>
AuthorDate: Fri Oct 14 16:34:15 2011 +0100
Commit: Greg Kroah-Hartman <gregkh@xxxxxxx>
CommitDate: Mon Oct 17 15:36:30 2011 -0700
staging:iio:dummy Add buffered reading support
Very simple buffered reading. Did not provide a trigger as
the sysfs trigger already meets that requirement.
Signed-off-by: Jonathan Cameron <jic23@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
===================================================
PARENT COMMIT NOT CLEAN. LOOK OUT FOR WRONG BISECT!
===================================================
Attached dmesg for the parent commit, too, to help confirm whether it is a noise error.
+-------------------------------------------------------+------------+------------+
| | e6477000fc | 9ad2e2e1d6 |
+-------------------------------------------------------+------------+------------+
| boot_successes | 774 | 0 |
| boot_failures | 426 | 300 |
| BUG:kernel_boot_hang | 426 | 0 |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference | 0 | 300 |
| Oops | 0 | 300 |
| RIP:iio_buffer_register | 0 | 300 |
| Kernel_panic-not_syncing:Attempted_to_kill_init | 0 | 300 |
| backtrace:iio_dummy_init | 0 | 300 |
| backtrace:async_page_fault | 0 | 300 |
+-------------------------------------------------------+------------+------------+
[ 1.369812] device-mapper: multipath service-time: version 0.2.0 loaded
[ 1.370969] Bluetooth: Virtual HCI driver ver 1.3
[ 1.371923] cpuidle: using governor ladder
[ 1.374155] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0
[ 1.375337] IP: [<ffffffff81a111de>] iio_buffer_register+0x2e/0x600
[ 1.376212] PGD 0
[ 1.376515] Oops: 0000 [#1] DEBUG_PAGEALLOC
[ 1.376709] CPU 0
[ 1.376709] Pid: 1, comm: swapper Not tainted 3.1.0-rc4-01470-g9ad2e2e #10
[ 1.376709] RIP: 0010:[<ffffffff81a111de>] [<ffffffff81a111de>] iio_buffer_register+0x2e/0x600
[ 1.376709] RSP: 0018:ffff880013425e50 EFLAGS: 00010246
[ 1.376709] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 1.376709] RDX: 0000000000000005 RSI: ffffffff82a77640 RDI: ffff880011be3008
[ 1.376709] RBP: ffff880013425ec0 R08: 0000000000000000 R09: 0000000000000000
[ 1.376709] R10: 0000000000000001 R11: 0000000000000002 R12: ffff880011be3008
[ 1.376709] R13: 00000000fffffff4 R14: 0000000000000000 R15: ffff880011be3008
[ 1.376709] FS: 0000000000000000(0000) GS:ffffffff82652000(0000) knlGS:0000000000000000
[ 1.376709] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1.376709] CR2: 00000000000000e0 CR3: 000000000260d000 CR4: 00000000000006b0
[ 1.376709] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1.376709] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1.376709] Process swapper (pid: 1, threadinfo ffff880013424000, task ffff880013422000)
[ 1.376709] Stack:
[ 1.376709] 0000000000000000 0000000000000000 ffff880013425e90 ffffffff81158c61
[ 1.376709] ffff880013425ea0 ffff880011be3668 ffffffff823f05d3 ffffffff82a77640
[ 1.376709] ffff880013425ec0 0000000000000000 ffff880011be3008 00000000fffffff4
[ 1.376709] Call Trace:
[ 1.376709] [<ffffffff81158c61>] ? debug_mutex_init+0x41/0x60
[ 1.376709] [<ffffffff82f39dc6>] iio_dummy_init+0x1a5/0x272
[ 1.376709] [<ffffffff82f39c21>] ? iio_init+0xe6/0xe6
[ 1.376709] [<ffffffff82ee3420>] do_one_initcall+0xd2/0x27b
[ 1.376709] [<ffffffff82ee36fa>] kernel_init+0x131/0x243
[ 1.376709] [<ffffffff81c65004>] kernel_thread_helper+0x4/0x10
[ 1.376709] [<ffffffff81c637b0>] ? retint_restore_args+0x13/0x13
[ 1.376709] [<ffffffff82ee35c9>] ? do_one_initcall+0x27b/0x27b
[ 1.376709] [<ffffffff81c65000>] ? gs_change+0x13/0x13
[ 1.376709] Code: e5 41 57 41 56 41 55 41 54 53 48 83 ec 48 e8 7a 2c 25 00 4c 8b b7 48 04 00 00 48 83 05 ab e4 1b 02 01 31 c0 49 89 ff 48 89 75 c8
[ 1.376709] 83 be e0 00 00 00 00 0f 95 c0 48 63 c8 48 83 c1 02 48 83 04
[ 1.376709] RIP [<ffffffff81a111de>] iio_buffer_register+0x2e/0x600
[ 1.376709] RSP <ffff880013425e50>
[ 1.376709] CR2: 00000000000000e0
[ 1.408095] ---[ end trace 45d5343e36d694cc ]---
[ 1.408926] Kernel panic - not syncing: Attempted to kill init!
git bisect start v3.2 v3.1 --
git bisect bad 6aaf05f472c97ebceff47d9eef464574f1a55727 # 22:21 0- 213 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
git bisect bad 3f8ddb032afa729d4bad1bf2965d3ec068de6b72 # 22:25 0- 71 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock
git bisect bad 37be944a0270402f9cda291a930b0286f6dc92f5 # 22:28 0- 210 Merge branch 'drm-core-next' of git://people.freedesktop.org/~airlied/linux
git bisect bad 3cfef9524677a4ecb392d6fbffe6ebce6302f1d4 # 22:33 0- 214 Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 4e7e2a2008f5d8c49791c412849d5b0232d39bb3 # 22:58 300+ 95 Merge branch 'for-linus' of git://opensource.wolfsonmicro.com/regmap
git bisect good 7670c7010c7b367ca40c3aba02afb36149764a6e # 23:16 300+ 106 Merge branch 'for-linus' of git://github.com/gregungerer/m68knommu
git bisect good efb8d21b2c6db3497655cc6a033ae8a9883e4063 # 23:24 300+ 140 Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
git bisect bad 37d96c28ecf0af1215bb6bbf580dbb1fabb5a6ec # 23:32 0- 32 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
git bisect bad aa77677e0a288e08073620db5d2a31df83ca4788 # 23:38 0- 6 Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
git bisect good c909ebbd0dcf19c617408c2cfde56c4bbd4f6cb4 # 23:52 300+ 0 staging: hv: add newline to log messages in netvsc
git bisect good bb7410b2fd325d889f674d2456ce953c519fb774 # 00:07 300+ 35 staging: brcm80211: removed likely/unlikely calls
git bisect good b2d62733e6ea427921e201269c1b55bca3a87936 # 00:17 300+ 73 staging: brcm80211: removed redundant code from brcms_c_set_gmode
git bisect good 39f10bf18c80c98d9fec376beabe80b9c59c7498 # 00:36 300+ 137 staging: xgifb: eliminate XGIfb_CRT2_write_enable variable
git bisect bad e63abd0a1b757f6433869c13da4cf1b07fc14284 # 00:45 0- 49 iio: Spell fix - consistent use of Converter - no functional changes
git bisect good b55e073e95804b022075e464b9cf82e269fd457a # 01:00 300+ 66 staging/easycap: kill timeval members of easycap struct
git bisect bad 9ad2e2e1d6506252f31a142a9b04121992af25e3 # 01:05 0- 148 staging:iio:dummy Add buffered reading support
git bisect good 3e2c96eab9278317569e2baf165f71042c927712 # 01:14 300+ 104 staging:iio: gpio build dependency fixing
git bisect good 9c95e01e84e31178b9a83b683a501ed76166c259 # 01:20 300+ 89 staging:iio:adc:max1363 incorrect allocation of available_scanmasks
git bisect good e6477000fced2c961c26fa42845bd388fdf95e79 # 01:25 300+ 61 staging:iio:dummy Add event support + fake event generator
# first bad commit: [9ad2e2e1d6506252f31a142a9b04121992af25e3] staging:iio:dummy Add buffered reading support
git bisect good e6477000fced2c961c26fa42845bd388fdf95e79 # 01:32 900+ 426 staging:iio:dummy Add event support + fake event generator
git bisect bad eee4ca37c17a74bc97c899b0e68a36ff0f17392a # 01:32 0- 26 0day head guard for 'devel-hourly-2014072206'
git bisect bad 15ba2236f3556fc01b9ca91394465152b5ea74b6 # 01:37 283- 180 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
git bisect bad 594a8bbcd415c795f54ee8b07f64ba313cc6074e # 01:44 1- 6 Add linux-next specific files for 20140721
This script may reproduce the error.
----------------------------------------------------------------------------
#!/bin/bash
kernel=$1
initrd=yocto-minimal-x86_64.cgz
wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/blob/master/initrd/$initrd
kvm=(
qemu-system-x86_64
-cpu kvm64
-enable-kvm
-kernel $kernel
-initrd $initrd
-m 320
-smp 1
-net nic,vlan=1,model=e1000
-net user,vlan=1
-boot order=nc
-no-reboot
-watchdog i6300esb
-rtc base=localtime
-serial stdio
-display none
-monitor null
)
append=(
hung_task_panic=1
earlyprintk=ttyS0,115200
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
panic=10
softlockup_panic=1
nmi_watchdog=panic
prompt_ramdisk=0
console=ttyS0,115200
console=tty0
vga=normal
root=/dev/ram0
rw
drbd.minor_count=8
)
"${kvm[@]}" --append "${append[*]}"
----------------------------------------------------------------------------
Thanks,
Fengguang
early console in setup code Probing EDD (edd=off to disable)... ok early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Linux version 3.1.0-rc4-01470-g9ad2e2e (kbuild@lkp-hsx01) (gcc version 4.8.2 (Debian 4.8.2-18) ) #10 Wed Jul 23 09:04:20 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-07220709/linux-devel:devel-hourly-2014072206:9ad2e2e1d6506252f31a142a9b04121992af25e3:bisect-linux1/.vmlinuz-9ad2e2e1d6506252f31a142a9b04121992af25e3-20140723090438-257-ivb41 branch=linux-devel/devel-hourly-2014072206 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-07220709/9ad2e2e1d6506252f31a142a9b04121992af25e3/vmlinuz-3.1.0-rc4-01470-g9ad2e2e drbd.minor_count=8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000013ffe000 (usable) [ 0.000000] BIOS-e820: 0000000013ffe000 - 0000000014000000 (reserved) [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x13ffe max_arch_pfn = 0x400000000 [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000f0ed0] f0ed0 [ 0.000000] mpc: f0ee0-f0fb0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-0000000013ffe000 [ 0.000000] 0000000000 - 0013ffe000 page 4k [ 0.000000] kernel direct mapping tables up to 13ffe000 @ 13c44000-13ce6000 [ 0.000000] RAMDISK: 13ce6000 - 13ff0000 [ 0.000000] ACPI: RSDP 00000000000f0d50 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0000000013fffbc1 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0000000013fff1c0 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0000000013ffe040 01180 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0000000013ffe000 00040 [ 0.000000] ACPI: SSDT 0000000013fff234 008DD (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0000000013fffb11 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0000000013fffb89 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000) [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:2663641, boot clock [ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880012e00000-ffff8800133fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00013ffe [ 0.000000] On node 0 totalpages: 81805 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1064 pages used for memmap [ 0.000000] DMA32 zone: 76758 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 2662d00 [ 0.000000] Allocating PCI resources starting at 14000000 (gap: 14000000:eaffc000) [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 80680 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-07220709/linux-devel:devel-hourly-2014072206:9ad2e2e1d6506252f31a142a9b04121992af25e3:bisect-linux1/.vmlinuz-9ad2e2e1d6506252f31a142a9b04121992af25e3-20140723090438-257-ivb41 branch=linux-devel/devel-hourly-2014072206 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-07220709/9ad2e2e1d6506252f31a142a9b04121992af25e3/vmlinuz-3.1.0-rc4-01470-g9ad2e2e drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Memory: 270932k/327672k available (12700k kernel code, 452k absent, 56288k reserved, 18901k data, 628k init) [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6367 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] hpet clockevent registered [ 0.000000] Detected 2693.508 MHz processor. [ 0.006666] Calibrating delay loop (skipped) preset value.. 5389.47 BogoMIPS (lpj=8978360) [ 0.006666] pid_max: default: 32768 minimum: 301 [ 0.006666] Mount-cache hash table entries: 256 [ 0.007128] CPU: Intel Common KVM processor stepping 01 [ 0.011565] ACPI: Core revision 20110623 [ 0.024139] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.026145] Getting VERSION: 1050014 [ 0.026677] Getting VERSION: 1050014 [ 0.027167] Getting ID: 0 [ 0.027537] Getting ID: ff000000 [ 0.028006] Getting LVT0: 8700 [ 0.028425] Getting LVT1: 8400 [ 0.028875] enabled ExtINT on CPU#0 [ 0.030206] ENABLING IO-APIC IRQs [ 0.030668] init IO_APIC IRQs [ 0.031086] apic 0 pin 0 not connected [ 0.031647] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.032735] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.033374] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.034481] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.035566] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.036704] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.037809] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.038894] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.040039] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.041148] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.042260] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.043371] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.044499] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.045605] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.046705] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.047825] apic 0 pin 16 not connected [ 0.048363] apic 0 pin 17 not connected [ 0.048889] apic 0 pin 18 not connected [ 0.050006] apic 0 pin 19 not connected [ 0.050551] apic 0 pin 20 not connected [ 0.051100] apic 0 pin 21 not connected [ 0.051645] apic 0 pin 22 not connected [ 0.052177] apic 0 pin 23 not connected [ 0.052860] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.053338] Using local APIC timer interrupts. [ 0.053341] calibrating APIC timer ... [ 0.056663] ... lapic delta = 6249708 [ 0.056663] ... PM-Timer delta = 357978 [ 0.056663] ... PM-Timer result ok [ 0.056663] ..... delta 6249708 [ 0.056663] ..... mult: 268440417 [ 0.056663] ..... calibration result: 3333177 [ 0.056663] ..... CPU clock speed is 2693.2997 MHz. [ 0.056663] ..... host bus clock speed is 1000.0177 MHz. [ 0.056663] xor: automatically using best checksumming function: generic_sse [ 0.070001] generic_sse: 12176.400 MB/sec [ 0.070396] xor: using function: generic_sse (12176.400 MB/sec) [ 0.070927] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.072221] print_constraints: dummy: [ 0.072829] NET: Registered protocol family 16 [ 0.073723] ACPI: bus type pci registered [ 0.074152] PCI: Using configuration type 1 for base access [ 0.083813] bio: create slab <bio-0> at 0 [ 0.140010] raid6: int64x1 2942 MB/s [ 0.196665] raid6: int64x2 3182 MB/s [ 0.253337] raid6: int64x4 2272 MB/s [ 0.310003] raid6: int64x8 2184 MB/s [ 0.366666] raid6: sse2x1 3052 MB/s [ 0.423327] raid6: sse2x2 3618 MB/s [ 0.479988] raid6: sse2x4 1838 MB/s [ 0.480357] raid6: using algorithm sse2x2 (3618 MB/s) [ 0.481171] ACPI: Added _OSI(Module Device) [ 0.481562] ACPI: Added _OSI(Processor Device) [ 0.481964] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.482398] ACPI: Added _OSI(Processor Aggregator Device) [ 0.486151] ACPI: EC: Look up EC in DSDT [ 0.499909] ACPI: Interpreter enabled [ 0.499973] ACPI: (supports S0 S3 S5) [ 0.500450] ACPI: Using IOAPIC for interrupt routing [ 0.530893] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.533116] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.534827] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.536643] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xadff] [ 0.537641] pci_root PNP0A03:00: host bridge window [io 0xae0f-0xaeff] [ 0.538654] pci_root PNP0A03:00: host bridge window [io 0xaf20-0xafdf] [ 0.539630] pci_root PNP0A03:00: host bridge window [io 0xafe4-0xffff] [ 0.539976] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.541088] pci_root PNP0A03:00: host bridge window [mem 0x14000000-0xfebfffff] [ 0.542372] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600 [ 0.543850] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601 [ 0.545435] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101 [ 0.549976] pci 0000:00:01.1: reg 20: [io 0xc040-0xc04f] [ 0.552104] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680 [ 0.553757] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.554806] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.555677] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300 [ 0.557098] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 0.558608] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff] [ 0.563747] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref] [ 0.564475] pci 0000:00:03.0: [8086:100e] type 0 class 0x000200 [ 0.565764] pci 0000:00:03.0: reg 10: [mem 0xfebc0000-0xfebdffff] [ 0.567020] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f] [ 0.571064] pci 0000:00:03.0: reg 30: [mem 0xfeb80000-0xfebbffff pref] [ 0.571752] pci 0000:00:04.0: [8086:25ab] type 0 class 0x000880 [ 0.572691] pci 0000:00:04.0: reg 10: [mem 0xfebf1000-0xfebf100f] [ 0.575934] pci_bus 0000:00: on NUMA node 0 [ 0.576325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.582211] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.612340] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.613250] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.613785] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.614677] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.615418] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.617601] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.618338] vgaarb: loaded [ 0.618589] vgaarb: bridge control possible 0000:00:02.0 [ 0.619569] i2c-core: driver [aat2870] using legacy suspend method [ 0.619965] i2c-core: driver [aat2870] using legacy resume method [ 0.620864] SCSI subsystem initialized [ 0.621387] libata version 3.00 loaded. [ 0.622164] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.622744] PCI: Using ACPI for IRQ routing [ 0.623300] PCI: pci_cache_line_size set to 64 bytes [ 0.623945] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.624513] reserve RAM buffer: 0000000013ffe000 - 0000000013ffffff [ 0.625679] Bluetooth: Core ver 2.16 [ 0.626106] NET: Registered protocol family 31 [ 0.626513] Bluetooth: HCI device and connection manager initialized [ 0.626694] Bluetooth: HCI socket layer initialized [ 0.627141] NET: Registered protocol family 8 [ 0.627540] NET: Registered protocol family 20 [ 0.628113] Switching to clocksource kvm-clock [ 0.629189] Warning: could not register all branches stats [ 0.629699] Warning: could not register annotated branches stats [ 0.658114] pnp: PnP ACPI init [ 0.658696] ACPI: bus type pnp registered [ 0.659752] pnp 00:00: [bus 00-ff] [ 0.660315] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.660880] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.661529] pnp 00:00: [io 0x0d00-0xadff window] [ 0.662169] pnp 00:00: [io 0xae0f-0xaeff window] [ 0.662812] pnp 00:00: [io 0xaf20-0xafdf window] [ 0.663540] pnp 00:00: [io 0xafe4-0xffff window] [ 0.664188] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.664937] pnp 00:00: [mem 0x14000000-0xfebfffff window] [ 0.665970] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.667067] pnp 00:01: [io 0x0070-0x0071] [ 0.667656] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.668711] pnp 00:01: [irq 8] [ 0.668993] pnp 00:01: [io 0x0072-0x0077] [ 0.669493] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.670242] pnp 00:02: [io 0x0060] [ 0.670572] pnp 00:02: [io 0x0064] [ 0.670913] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.671640] pnp 00:02: [irq 1] [ 0.672064] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.672724] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.673545] pnp 00:03: [irq 12] [ 0.673955] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.674775] pnp 00:04: [io 0x03f2-0x03f5] [ 0.675157] pnp 00:04: [io 0x03f7] [ 0.675482] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.676211] pnp 00:04: [irq 6] [ 0.676495] pnp 00:04: [dma 2] [ 0.676985] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.677716] pnp 00:05: [io 0x0378-0x037f] [ 0.678099] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.678827] pnp 00:05: [irq 7] [ 0.679258] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.679982] pnp 00:06: [io 0x03f8-0x03ff] [ 0.680379] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.681115] pnp 00:06: [irq 4] [ 0.681509] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.683223] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 0.683892] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.685065] pnp 00:08: [io 0xaf00-0xaf1f] [ 0.685702] pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active) [ 0.686317] pnp: PnP ACPI: found 9 devices [ 0.686763] ACPI: ACPI bus type pnp unregistered [ 0.694137] PCI: max bus depth: 0 pci_try_num: 1 [ 0.694573] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.695079] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff] [ 0.695651] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff] [ 0.696151] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf] [ 0.696655] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff] [ 0.697328] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff] [ 0.698337] pci_bus 0000:00: resource 10 [mem 0x14000000-0xfebfffff] [ 0.699331] NET: Registered protocol family 1 [ 0.699861] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.700946] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.701888] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.702948] pci 0000:00:02.0: Boot video device [ 0.703911] PCI: CLS 0 bytes, default 64 [ 0.704906] Unpacking initramfs... [ 0.875994] debug: unmapping init memory ffff880013ce6000..ffff880013ff0000 [ 0.878864] kvm: no hardware support [ 0.880681] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1 [ 0.881668] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 0.883782] Intel AES-NI instructions are not detected. [ 0.884499] Intel PCLMULQDQ-NI instructions are not detected. [ 0.885812] audit: initializing netlink socket (disabled) [ 0.886798] type=2000 audit(1406048667.883:1): initialized [ 0.891026] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.893517] VFS: Disk quotas dquot_6.5.2 [ 0.894082] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.895208] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.896359] NTFS driver 2.1.30 [Flags: R/W DEBUG]. [ 0.898417] JFS: nTxBlock = 2116, nTxLock = 16933 [ 0.901810] msgmni has been set to 529 [ 0.902690] alg: No test for cipher_null (cipher_null-generic) [ 0.903896] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 0.904943] alg: No test for digest_null (digest_null-generic) [ 0.905947] alg: No test for compress_null (compress_null-generic) [ 0.910476] alg: No test for fcrypt (fcrypt-generic) [ 0.925829] alg: No test for stdrng (krng) [ 0.946889] NET: Registered protocol family 38 [ 0.947733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.948754] io scheduler noop registered (default) [ 0.949404] io scheduler deadline registered [ 0.949983] list_sort_test: start testing list_sort() [ 0.954462] i2c-core: driver [adp8860_bl] using legacy suspend method [ 0.955333] i2c-core: driver [adp8860_bl] using legacy resume method [ 0.957309] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.958360] ACPI: Power Button [PWRF] [ 0.959255] ACPI: acpi_idle registered with cpuidle [ 0.961573] XENFS: not registering filesystem on non-xen platform [ 0.962710] HDLC line discipline maxframe=4096 [ 0.963314] N_HDLC line discipline registered. [ 0.964050] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 0.964800] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.994665] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.025624] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.028321] Non-volatile memory driver v1.3 [ 1.029420] smapi::smapi_init, ERROR invalid usSmapiID [ 1.030223] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 1.031446] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 1.032408] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 1.033459] ipmi message handler version 39.2 [ 1.034062] ipmi device interface [ 1.034705] IPMI System Interface driver. [ 1.035489] ipmi_si: Adding default-specified kcs state machine [ 1.036320] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 1.037877] ipmi_si: Interface detection failed [ 1.038599] ipmi_si: Adding default-specified smic state machine [ 1.039569] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 1.041254] ipmi_si: Interface detection failed [ 1.041996] ipmi_si: Adding default-specified bt state machine [ 1.042869] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 1.044410] ipmi_si: Interface detection failed [ 1.045450] ipmi_si: Unable to find any System Interface(s) [ 1.046276] IPMI Watchdog: driver initialized [ 1.047041] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 1.048156] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.049448] Hangcheck: Using getrawmonotonic(). [ 1.050382] [drm:drm_core_init] *ERROR* Cannot create /proc/dri [ 1.051811] Uniform Multi-Platform E-IDE driver [ 1.052662] ide-gd driver 1.18 [ 1.053248] ide-cd driver 5.00 [ 1.054456] Loading iSCSI transport class v2.0-870. [ 1.057300] rdac: device handler registered [ 1.058105] hp_sw: device handler registered [ 1.058751] emc: device handler registered [ 1.059347] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 1.060567] osst :I: Tape driver with OnStream support version 0.99.4 [ 1.060570] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 1.063002] SCSI Media Changer driver v0.25 [ 1.064213] osd: LOADED open-osd 0.2.0 [ 1.064936] Error: Driver 'pata_platform' is already registered, aborting... [ 1.066852] SSFDC read-only Flash Translation layer [ 1.067537] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.068458] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [ 1.069731] physmap-flash.0: failed to claim resource 0 [ 1.070652] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 1.071705] slram: not enough parameters. [ 1.077189] Spectra MTD driver [ 1.077787] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.079069] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.080431] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.081689] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.082943] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.084300] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.085555] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit) [ 1.086878] flash size: 128 MiB [ 1.087314] page size: 512 bytes [ 1.087765] OOB area size: 16 bytes [ 1.088241] sector size: 16 KiB [ 1.088682] pages number: 262144 [ 1.089124] pages per sector: 32 [ 1.089560] bus width: 8 [ 1.089917] bits in sector size: 14 [ 1.090509] bits in page size: 9 [ 1.090962] bits in OOB size: 4 [ 1.091386] flash size with OOB: 135168 KiB [ 1.091957] page address bytes: 4 [ 1.092408] sector address bytes: 3 [ 1.092881] options: 0x62 [ 1.095356] Scanning device for bad blocks [ 1.237428] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 1.240141] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 1.243074] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@xxxxxxxxxxxxxxxxx> [ 1.244872] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@xxxxxxxxxxxxxxxxx> [ 1.246429] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.248818] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.249565] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.341948] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.353330] i2c /dev entries driver [ 1.354133] i2c-parport-light: adapter type unspecified [ 1.354855] Driver for 1-wire Dallas network protocol. [ 1.356016] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 1.357506] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 1.359111] i2c-core: driver [max17040] using legacy suspend method [ 1.360150] i2c-core: driver [max17040] using legacy resume method [ 1.361420] md: raid1 personality registered for level 1 [ 1.362211] md: raid10 personality registered for level 10 [ 1.363007] md: raid6 personality registered for level 6 [ 1.363892] md: raid5 personality registered for level 5 [ 1.364661] md: raid4 personality registered for level 4 [ 1.365418] md: faulty personality registered for level -5 [ 1.366498] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@xxxxxxxxxx [ 1.368040] device-mapper: multipath: version 1.3.0 loaded [ 1.368872] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.369812] device-mapper: multipath service-time: version 0.2.0 loaded [ 1.370969] Bluetooth: Virtual HCI driver ver 1.3 [ 1.371923] cpuidle: using governor ladder [ 1.374155] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0 [ 1.375337] IP: [<ffffffff81a111de>] iio_buffer_register+0x2e/0x600 [ 1.376212] PGD 0 [ 1.376515] Oops: 0000 [#1] DEBUG_PAGEALLOC [ 1.376709] CPU 0 [ 1.376709] Pid: 1, comm: swapper Not tainted 3.1.0-rc4-01470-g9ad2e2e #10 [ 1.376709] RIP: 0010:[<ffffffff81a111de>] [<ffffffff81a111de>] iio_buffer_register+0x2e/0x600 [ 1.376709] RSP: 0018:ffff880013425e50 EFLAGS: 00010246 [ 1.376709] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 1.376709] RDX: 0000000000000005 RSI: ffffffff82a77640 RDI: ffff880011be3008 [ 1.376709] RBP: ffff880013425ec0 R08: 0000000000000000 R09: 0000000000000000 [ 1.376709] R10: 0000000000000001 R11: 0000000000000002 R12: ffff880011be3008 [ 1.376709] R13: 00000000fffffff4 R14: 0000000000000000 R15: ffff880011be3008 [ 1.376709] FS: 0000000000000000(0000) GS:ffffffff82652000(0000) knlGS:0000000000000000 [ 1.376709] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1.376709] CR2: 00000000000000e0 CR3: 000000000260d000 CR4: 00000000000006b0 [ 1.376709] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.376709] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1.376709] Process swapper (pid: 1, threadinfo ffff880013424000, task ffff880013422000) [ 1.376709] Stack: [ 1.376709] 0000000000000000 0000000000000000 ffff880013425e90 ffffffff81158c61 [ 1.376709] ffff880013425ea0 ffff880011be3668 ffffffff823f05d3 ffffffff82a77640 [ 1.376709] ffff880013425ec0 0000000000000000 ffff880011be3008 00000000fffffff4 [ 1.376709] Call Trace: [ 1.376709] [<ffffffff81158c61>] ? debug_mutex_init+0x41/0x60 [ 1.376709] [<ffffffff82f39dc6>] iio_dummy_init+0x1a5/0x272 [ 1.376709] [<ffffffff82f39c21>] ? iio_init+0xe6/0xe6 [ 1.376709] [<ffffffff82ee3420>] do_one_initcall+0xd2/0x27b [ 1.376709] [<ffffffff82ee36fa>] kernel_init+0x131/0x243 [ 1.376709] [<ffffffff81c65004>] kernel_thread_helper+0x4/0x10 [ 1.376709] [<ffffffff81c637b0>] ? retint_restore_args+0x13/0x13 [ 1.376709] [<ffffffff82ee35c9>] ? do_one_initcall+0x27b/0x27b [ 1.376709] [<ffffffff81c65000>] ? gs_change+0x13/0x13 [ 1.376709] Code: e5 41 57 41 56 41 55 41 54 53 48 83 ec 48 e8 7a 2c 25 00 4c 8b b7 48 04 00 00 48 83 05 ab e4 1b 02 01 31 c0 49 89 ff 48 89 75 c8 [ 1.376709] 83 be e0 00 00 00 00 0f 95 c0 48 63 c8 48 83 c1 02 48 83 04 [ 1.376709] RIP [<ffffffff81a111de>] iio_buffer_register+0x2e/0x600 [ 1.376709] RSP <ffff880013425e50> [ 1.376709] CR2: 00000000000000e0 [ 1.408095] ---[ end trace 45d5343e36d694cc ]--- [ 1.408926] Kernel panic - not syncing: Attempted to kill init! [ 1.409767] Pid: 1, comm: swapper Tainted: G D 3.1.0-rc4-01470-g9ad2e2e #10 [ 1.410961] Call Trace: [ 1.411338] [<ffffffff81c42549>] panic+0xd9/0x30b [ 1.412045] [<ffffffff81102ed3>] do_exit+0xd43/0x1180 [ 1.412787] [<ffffffff810fe0e8>] ? kmsg_dump+0x168/0x1d0 [ 1.413669] [<ffffffff810fe02a>] ? kmsg_dump+0xaa/0x1d0 [ 1.414435] [<ffffffff8109daa1>] oops_end+0x191/0x1e0 [ 1.415184] [<ffffffff810cc1bf>] no_context+0x33f/0x5a0 [ 1.415956] [<ffffffff810cc5c5>] __bad_area_nosemaphore+0xd5/0x4c0 [ 1.416970] [<ffffffff811465f2>] ? sched_clock_local.constprop.2+0xc2/0x170 [ 1.417992] [<ffffffff810ccca9>] ? do_page_fault+0x289/0xe10 [ 1.418829] [<ffffffff810cc9cb>] bad_area_nosemaphore+0x1b/0x30 [ 1.419693] [<ffffffff810ccdfd>] do_page_fault+0x3dd/0xe10 [ 1.420568] [<ffffffff8123ee56>] ? slob_alloc.isra.7+0x2f6/0x530 [ 1.421417] [<ffffffff815e999a>] ? trace_hardirqs_off_thunk+0x3a/0x3c [ 1.422317] [<ffffffff810c5df7>] do_async_page_fault+0x37/0xc0 [ 1.423130] [<ffffffff81c63a65>] async_page_fault+0x25/0x30 [ 1.424010] [<ffffffff81a111de>] ? iio_buffer_register+0x2e/0x600 [ 1.424856] [<ffffffff81158c61>] ? debug_mutex_init+0x41/0x60 [ 1.425653] [<ffffffff82f39dc6>] iio_dummy_init+0x1a5/0x272 [ 1.426417] [<ffffffff82f39c21>] ? iio_init+0xe6/0xe6 [ 1.427228] [<ffffffff82ee3420>] do_one_initcall+0xd2/0x27b [ 1.428004] [<ffffffff82ee36fa>] kernel_init+0x131/0x243 [ 1.428747] [<ffffffff81c65004>] kernel_thread_helper+0x4/0x10 [ 1.429543] [<ffffffff81c637b0>] ? retint_restore_args+0x13/0x13 [ 1.430493] [<ffffffff82ee35c9>] ? do_one_initcall+0x27b/0x27b [ 1.431302] [<ffffffff81c65000>] ? gs_change+0x13/0x13 [ 1.432035] Rebooting in 10 seconds.. Elapsed time: 5 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-randconfig-s0-07220709/9ad2e2e1d6506252f31a142a9b04121992af25e3/vmlinuz-3.1.0-rc4-01470-g9ad2e2e -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-07220709/linux-devel:devel-hourly-2014072206:9ad2e2e1d6506252f31a142a9b04121992af25e3:bisect-linux1/.vmlinuz-9ad2e2e1d6506252f31a142a9b04121992af25e3-20140723090438-257-ivb41 branch=linux-devel/devel-hourly-2014072206 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-07220709/9ad2e2e1d6506252f31a142a9b04121992af25e3/vmlinuz-3.1.0-rc4-01470-g9ad2e2e drbd.minor_count=8' -initrd /kernel-tests/initrd/yocto-minimal-x86_64.cgz -m 320 -smp 1 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-yocto-ivb41-92 -serial file:/dev/shm/kboot/serial-yocto-ivb41-92 -daemonize -display none -monitor null
early console in setup code Probing EDD (edd=off to disable)... ok early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Linux version 3.1.0-rc4-01469-ge647700 (kbuild@lkp-hsx01) (gcc version 4.8.2 (Debian 4.8.2-18) ) #12 Wed Jul 23 09:21:18 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-07220709/linux-devel:devel-hourly-2014072206:e6477000fced2c961c26fa42845bd388fdf95e79:bisect-linux1/.vmlinuz-e6477000fced2c961c26fa42845bd388fdf95e79-20140723092146-119-ivb41 branch=linux-devel/devel-hourly-2014072206 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-07220709/e6477000fced2c961c26fa42845bd388fdf95e79/vmlinuz-3.1.0-rc4-01469-ge647700 drbd.minor_count=8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000013ffe000 (usable) [ 0.000000] BIOS-e820: 0000000013ffe000 - 0000000014000000 (reserved) [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x13ffe max_arch_pfn = 0x400000000 [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000f0eb0] f0eb0 [ 0.000000] mpc: f0ec0-f0fa4 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-0000000013ffe000 [ 0.000000] 0000000000 - 0013ffe000 page 4k [ 0.000000] kernel direct mapping tables up to 13ffe000 @ 1289b000-1293d000 [ 0.000000] RAMDISK: 1293d000 - 13ff0000 [ 0.000000] ACPI: RSDP 00000000000f0d00 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0000000013fffc2a 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0000000013fff1c0 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0000000013ffe040 01180 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0000000013ffe000 00040 [ 0.000000] ACPI: SSDT 0000000013fff234 0093E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0000000013fffb72 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0000000013fffbf2 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000) [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:2663641, boot clock [ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880011a00000-ffff880011ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00013ffe [ 0.000000] On node 0 totalpages: 81805 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1064 pages used for memmap [ 0.000000] DMA32 zone: 76758 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 2662d00 [ 0.000000] Allocating PCI resources starting at 14000000 (gap: 14000000:eaffc000) [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 80680 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-07220709/linux-devel:devel-hourly-2014072206:e6477000fced2c961c26fa42845bd388fdf95e79:bisect-linux1/.vmlinuz-e6477000fced2c961c26fa42845bd388fdf95e79-20140723092146-119-ivb41 branch=linux-devel/devel-hourly-2014072206 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-07220709/e6477000fced2c961c26fa42845bd388fdf95e79/vmlinuz-3.1.0-rc4-01469-ge647700 drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Memory: 250800k/327672k available (12700k kernel code, 452k absent, 76420k reserved, 18901k data, 628k init) [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6367 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] hpet clockevent registered [ 0.000000] Detected 2693.508 MHz processor. [ 0.006666] Calibrating delay loop (skipped) preset value.. 5389.47 BogoMIPS (lpj=8978360) [ 0.006666] pid_max: default: 32768 minimum: 301 [ 0.006731] Mount-cache hash table entries: 256 [ 0.008740] CPU: Intel Common KVM processor stepping 01 [ 0.013548] ACPI: Core revision 20110623 [ 0.028788] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.037355] Getting VERSION: 1050014 [ 0.037904] Getting VERSION: 1050014 [ 0.038450] Getting ID: 0 [ 0.038862] Getting ID: ff000000 [ 0.039353] Getting LVT0: 8700 [ 0.039802] Getting LVT1: 8400 [ 0.040038] enabled ExtINT on CPU#0 [ 0.041453] ENABLING IO-APIC IRQs [ 0.041950] init IO_APIC IRQs [ 0.042384] apic 0 pin 0 not connected [ 0.043347] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.044517] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.045684] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.046732] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.047935] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.049172] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.050043] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.051237] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.052422] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.053376] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.054561] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.055748] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.056728] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.057917] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.060042] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.061221] apic 0 pin 16 not connected [ 0.061799] apic 0 pin 17 not connected [ 0.062370] apic 0 pin 18 not connected [ 0.063340] apic 0 pin 19 not connected [ 0.063952] apic 0 pin 20 not connected [ 0.064584] apic 0 pin 21 not connected [ 0.065239] apic 0 pin 22 not connected [ 0.065881] apic 0 pin 23 not connected [ 0.066848] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070005] Using local APIC timer interrupts. [ 0.070009] calibrating APIC timer ... [ 0.073329] ... lapic delta = 10834669 [ 0.073329] ... PM-Timer delta = 620518 [ 0.073329] APIC calibration not consistent with PM-Timer: 173ms instead of 100ms [ 0.073329] APIC delta adjusted to PM-Timer: 6250121 (10834669) [ 0.073329] TSC delta adjusted to PM-Timer: 269351132 (466923756) [ 0.073329] ..... delta 6250121 [ 0.073329] ..... mult: 268458156 [ 0.073329] ..... calibration result: 3333397 [ 0.073329] ..... CPU clock speed is 2693.2602 MHz. [ 0.073329] ..... host bus clock speed is 1000.0397 MHz. [ 0.074554] xor: automatically using best checksumming function: generic_sse [ 0.090025] generic_sse: 7846.800 MB/sec [ 0.093356] xor: using function: generic_sse (7846.800 MB/sec) [ 0.094664] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.097980] print_constraints: dummy: [ 0.099326] NET: Registered protocol family 16 [ 0.100859] ACPI: bus type pci registered [ 0.103442] PCI: Using configuration type 1 for base access [ 0.129752] bio: create slab <bio-0> at 0 [ 0.186699] raid6: int64x1 1644 MB/s [ 0.243371] raid6: int64x2 1535 MB/s [ 0.300028] raid6: int64x4 1346 MB/s [ 0.356669] raid6: int64x8 857 MB/s [ 0.416657] raid6: sse2x1 885 MB/s [ 0.473338] raid6: sse2x2 1410 MB/s [ 0.530034] raid6: sse2x4 1359 MB/s [ 0.533308] raid6: using algorithm sse2x2 (1410 MB/s) [ 0.534935] ACPI: Added _OSI(Module Device) [ 0.536650] ACPI: Added _OSI(Processor Device) [ 0.539980] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.540967] ACPI: Added _OSI(Processor Aggregator Device) [ 0.553724] ACPI: EC: Look up EC in DSDT [ 0.597247] ACPI: Interpreter enabled [ 0.599982] ACPI: (supports S0 S3 S5) [ 0.603533] ACPI: Using IOAPIC for interrupt routing [ 0.653574] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.660102] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.664245] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.666648] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xadff] [ 0.669977] pci_root PNP0A03:00: host bridge window [io 0xae0f-0xaeff] [ 0.671977] pci_root PNP0A03:00: host bridge window [io 0xaf20-0xafdf] [ 0.673312] pci_root PNP0A03:00: host bridge window [io 0xafe4-0xffff] [ 0.674780] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.676644] pci_root PNP0A03:00: host bridge window [mem 0x14000000-0xfebfffff] [ 0.680141] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600 [ 0.683816] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601 [ 0.687359] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101 [ 0.692421] pci 0000:00:01.1: reg 20: [io 0xc040-0xc04f] [ 0.694790] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680 [ 0.700110] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.701614] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.703548] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300 [ 0.710644] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 0.714750] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff] [ 0.730629] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref] [ 0.733488] pci 0000:00:03.0: [8086:100e] type 0 class 0x000200 [ 0.737743] pci 0000:00:03.0: reg 10: [mem 0xfebc0000-0xfebdffff] [ 0.741050] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f] [ 0.748018] pci 0000:00:03.0: reg 30: [mem 0xfeb80000-0xfebbffff pref] [ 0.750155] pci 0000:00:04.0: [8086:25ab] type 0 class 0x000880 [ 0.753901] pci 0000:00:04.0: reg 10: [mem 0xfebf1000-0xfebf100f] [ 0.763661] pci_bus 0000:00: on NUMA node 0 [ 0.766646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.774579] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.825199] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.827674] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.829596] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.830948] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.833683] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.838872] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.839978] vgaarb: loaded [ 0.840559] vgaarb: bridge control possible 0000:00:02.0 [ 0.844252] i2c-core: driver [aat2870] using legacy suspend method [ 0.846622] i2c-core: driver [aat2870] using legacy resume method [ 0.848587] SCSI subsystem initialized [ 0.850211] libata version 3.00 loaded. [ 0.851628] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.852927] PCI: Using ACPI for IRQ routing [ 0.853298] PCI: pci_cache_line_size set to 64 bytes [ 0.854615] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.856642] reserve RAM buffer: 0000000013ffe000 - 0000000013ffffff [ 0.859010] Bluetooth: Core ver 2.16 [ 0.860218] NET: Registered protocol family 31 [ 0.863286] Bluetooth: HCI device and connection manager initialized [ 0.864620] Bluetooth: HCI socket layer initialized [ 0.865649] NET: Registered protocol family 8 [ 0.866624] NET: Registered protocol family 20 [ 0.867830] Switching to clocksource kvm-clock [ 0.869488] Warning: could not register all branches stats [ 0.869488] Warning: could not register annotated branches stats [ 0.975084] pnp: PnP ACPI init [ 0.975665] ACPI: bus type pnp registered [ 0.976961] pnp 00:00: [bus 00-ff] [ 0.977490] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.978083] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.979082] pnp 00:00: [io 0x0d00-0xadff window] [ 0.980225] pnp 00:00: [io 0xae0f-0xaeff window] [ 0.981236] pnp 00:00: [io 0xaf20-0xafdf window] [ 0.982238] pnp 00:00: [io 0xafe4-0xffff window] [ 0.983242] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.994334] pnp 00:00: [mem 0x14000000-0xfebfffff window] [ 0.995752] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.997191] pnp 00:01: [io 0x0070-0x0071] [ 0.997730] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.998752] pnp 00:01: [irq 8] [ 0.999158] pnp 00:01: [io 0x0072-0x0077] [ 0.999959] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.001596] pnp 00:02: [io 0x0060] [ 1.002340] pnp 00:02: [io 0x0064] [ 1.003076] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 1.005692] pnp 00:02: [irq 1] [ 1.006641] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.017998] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 1.019701] pnp 00:03: [irq 12] [ 1.020615] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.021664] pnp 00:04: [io 0x03f2-0x03f5] [ 1.022207] pnp 00:04: [io 0x03f7] [ 1.022666] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 1.024029] pnp 00:04: [irq 6] [ 1.024695] pnp 00:04: [dma 2] [ 1.025712] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.033745] pnp 00:05: [io 0x0378-0x037f] [ 1.034641] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 1.036339] pnp 00:05: [irq 7] [ 1.037402] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.039232] pnp 00:06: [io 0x03f8-0x03ff] [ 1.050392] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 1.052076] pnp 00:06: [irq 4] [ 1.053046] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.055657] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 1.057201] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.059432] pnp 00:08: [io 0xaf00-0xaf1f] [ 1.063871] pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active) [ 1.065282] pnp: PnP ACPI: found 9 devices [ 1.066125] ACPI: ACPI bus type pnp unregistered [ 1.084732] PCI: max bus depth: 0 pci_try_num: 1 [ 1.085734] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.088124] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff] [ 1.089281] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff] [ 1.100711] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf] [ 1.101891] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff] [ 1.103055] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff] [ 1.104127] pci_bus 0000:00: resource 10 [mem 0x14000000-0xfebfffff] [ 1.104996] NET: Registered protocol family 1 [ 1.105614] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.106433] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.107735] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.109329] pci 0000:00:02.0: Boot video device [ 1.113554] PCI: CLS 0 bytes, default 64 [ 1.114898] Unpacking initramfs... [ 4.485330] debug: unmapping init memory ffff88001293d000..ffff880013ff0000 [ 4.520965] kvm: no hardware support [ 4.522958] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1 [ 4.524595] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 4.527323] Intel AES-NI instructions are not detected. [ 4.528404] Intel PCLMULQDQ-NI instructions are not detected. [ 4.542026] audit: initializing netlink socket (disabled) [ 4.543592] type=2000 audit(1406049668.543:1): initialized [ 4.549256] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 4.551158] VFS: Disk quotas dquot_6.5.2 [ 4.552036] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.553845] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 4.558449] NTFS driver 2.1.30 [Flags: R/W DEBUG]. [ 4.724911] JFS: nTxBlock = 1959, nTxLock = 15675 [ 4.728739] msgmni has been set to 489 [ 4.729833] alg: No test for cipher_null (cipher_null-generic) [ 4.731327] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 4.733878] alg: No test for digest_null (digest_null-generic) [ 4.737701] alg: No test for compress_null (compress_null-generic) [ 4.756092] alg: No test for fcrypt (fcrypt-generic) [ 4.763989] alg: No test for stdrng (krng) [ 4.804879] NET: Registered protocol family 38 [ 4.818877] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 4.820675] io scheduler noop registered (default) [ 4.821761] io scheduler deadline registered [ 4.822701] list_sort_test: start testing list_sort() [ 4.828270] i2c-core: driver [adp8860_bl] using legacy suspend method [ 4.829773] i2c-core: driver [adp8860_bl] using legacy resume method [ 4.839721] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 4.841415] ACPI: Power Button [PWRF] [ 4.842511] ACPI: acpi_idle registered with cpuidle [ 4.849027] XENFS: not registering filesystem on non-xen platform [ 4.864291] HDLC line discipline maxframe=4096 [ 4.865245] N_HDLC line discipline registered. [ 4.866168] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 4.867413] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.925234] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.982053] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.986598] Non-volatile memory driver v1.3 [ 4.994014] smapi::smapi_init, ERROR invalid usSmapiID [ 4.995327] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 5.010367] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 5.011874] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 5.013569] ipmi message handler version 39.2 [ 5.014501] ipmi device interface [ 5.015481] IPMI System Interface driver. [ 5.016816] ipmi_si: Adding default-specified kcs state machine [ 5.018090] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 5.020303] ipmi_si: Interface detection failed [ 5.021282] ipmi_si: Adding default-specified smic state machine [ 5.022535] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 5.024702] ipmi_si: Interface detection failed [ 5.026827] ipmi_si: Adding default-specified bt state machine [ 5.030278] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 5.032322] ipmi_si: Interface detection failed [ 5.034816] ipmi_si: Unable to find any System Interface(s) [ 5.037950] IPMI Watchdog: driver initialized [ 5.039692] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 5.050591] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 5.052552] Hangcheck: Using getrawmonotonic(). [ 5.054658] [drm:drm_core_init] *ERROR* Cannot create /proc/dri [ 5.057106] Uniform Multi-Platform E-IDE driver [ 5.059076] ide-gd driver 1.18 [ 5.060414] ide-cd driver 5.00 [ 5.065411] Loading iSCSI transport class v2.0-870. [ 5.071865] rdac: device handler registered [ 5.073008] hp_sw: device handler registered [ 5.075084] emc: device handler registered [ 5.077668] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 5.080891] osst :I: Tape driver with OnStream support version 0.99.4 [ 5.080894] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 5.099639] SCSI Media Changer driver v0.25 [ 5.101388] osd: LOADED open-osd 0.2.0 [ 5.102578] Error: Driver 'pata_platform' is already registered, aborting... [ 5.105471] SSFDC read-only Flash Translation layer [ 5.106527] mtdoops: mtd device (mtddev=name/number) must be supplied [ 5.108395] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [ 5.110566] physmap-flash.0: failed to claim resource 0 [ 5.111751] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 5.113197] slram: not enough parameters. [ 5.131212] Spectra MTD driver [ 5.132273] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 5.134544] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 5.136594] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 5.145773] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 5.147913] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 5.149888] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 5.152185] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit) [ 5.167772] flash size: 128 MiB [ 5.168439] page size: 512 bytes [ 5.169104] OOB area size: 16 bytes [ 5.169835] sector size: 16 KiB [ 5.170756] pages number: 262144 [ 5.171620] pages per sector: 32 [ 5.172473] bus width: 8 [ 5.173149] bits in sector size: 14 [ 5.174022] bits in page size: 9 [ 5.174741] bits in OOB size: 4 [ 5.175415] flash size with OOB: 135168 KiB [ 5.176298] page address bytes: 4 [ 5.177236] sector address bytes: 3 [ 5.178161] options: 0x62 [ 5.181415] Scanning device for bad blocks [ 5.458686] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 5.473903] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 5.478715] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@xxxxxxxxxxxxxxxxx> [ 5.481218] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@xxxxxxxxxxxxxxxxx> [ 5.484718] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 5.494279] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.495560] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.626544] Refined TSC clocksource calibration: 2693.507 MHz. [ 5.631740] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 5.650324] i2c /dev entries driver [ 5.651690] i2c-parport-light: adapter type unspecified [ 5.652796] Driver for 1-wire Dallas network protocol. [ 5.654970] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 5.656668] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 5.659872] i2c-core: driver [max17040] using legacy suspend method [ 5.661765] i2c-core: driver [max17040] using legacy resume method [ 5.664372] md: raid1 personality registered for level 1 [ 5.665453] md: raid10 personality registered for level 10 [ 5.666574] md: raid6 personality registered for level 6 [ 5.668101] md: raid5 personality registered for level 5 [ 5.669527] md: raid4 personality registered for level 4 [ 5.671130] md: faulty personality registered for level -5 [ 5.674162] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@xxxxxxxxxx [ 5.676516] device-mapper: multipath: version 1.3.0 loaded [ 5.677835] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.679389] device-mapper: multipath service-time: version 0.2.0 loaded [ 5.681481] Bluetooth: Virtual HCI driver ver 1.3 [ 5.683117] cpuidle: using governor ladder [ 5.690262] i2c-core: driver [adt7316] using legacy suspend method [ 5.691513] i2c-core: driver [adt7316] using legacy resume method [ 5.694951] i2c-core: driver [tsl2563] using legacy suspend method [ 5.697795] i2c-core: driver [tsl2563] using legacy resume method [ 5.699755] i2c-core: driver [tsl2583] using legacy suspend method [ 5.701612] i2c-core: driver [tsl2583] using legacy resume method [ 5.703616] i2c-core: driver [hmc5843] using legacy suspend method [ 5.704865] i2c-core: driver [hmc5843] using legacy resume method [ 5.707160] i2c-core: driver [cptm1217] using legacy suspend method [ 5.708768] i2c-core: driver [cptm1217] using legacy resume method [ 5.712052] ALSA device list: [ 5.712877] No soundcards found. [ 5.713920] NET: Registered protocol family 26 [ 5.716084] NET: Registered protocol family 17 [ 5.717292] NET: Registered protocol family 15 [ 5.718222] NET: Registered protocol family 5 [ 5.719162] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 5.721304] DECnet: Routing cache hash table of 128 buckets, 10Kbytes [ 5.723085] NET: Registered protocol family 12 [ 5.724812] Installing 9P2000 support [ 5.728207] NET: Registered protocol family 37 [ 5.741741] Registering the dns_resolver key type [ 5.743765] batman_adv: B.A.T.M.A.N. advanced 2011.3.0 (compatibility version 14) loaded [ 5.746030] [ 5.746033] printing PIC contents [ 5.747551] ... PIC IMR: ffff [ 5.748395] ... PIC IRR: 1013 [ 5.749279] ... PIC ISR: 0000 [ 5.750257] ... PIC ELCR: 0c00 [ 5.751049] printing local APIC contents on CPU#0/0: [ 5.753498] ... APIC ID: 00000000 (0) [ 5.753498] ... APIC VERSION: 01050014 [ 5.753498] ... APIC TASKPRI: 00000000 (00) [ 5.753498] ... APIC PROCPRI: 00000000 [ 5.753498] ... APIC LDR: 01000000 [ 5.753498] ... APIC DFR: ffffffff [ 5.753498] ... APIC SPIV: 000001ff [ 5.753498] ... APIC ISR field: [ 5.753498] 0000000000000000000000000000000000000000000000000000000000000000 [ 5.753498] ... APIC TMR field: [ 5.753498] 0000000002000000000000000000000000000000000000000000000000000000 [ 5.753498] ... APIC IRR field: [ 5.753498] 0000000000010000000000000000000000000000000000000000000000008000 [ 5.753498] ... APIC ESR: 00000000 [ 5.753498] ... APIC ICR: 000c4610 [ 5.753498] ... APIC ICR2: 00000000 [ 5.753498] ... APIC LVTT: 000000ef [ 5.753498] ... APIC LVTPC: 00010000 [ 5.753498] ... APIC LVT0: 00010700 [ 5.753498] ... APIC LVT1: 00000400 [ 5.753498] ... APIC LVTERR: 000000fe [ 5.753498] ... APIC TMICT: 00030434 [ 5.753498] ... APIC TMCCT: 00000000 [ 5.753498] ... APIC TDCR: 00000003 [ 5.753498] [ 5.806374] number of MP IRQ sources: 15. [ 5.807607] number of IO-APIC #0 registers: 24. [ 5.808856] testing the IO APIC....................... [ 5.810384] [ 5.810820] IO APIC #0...... [ 5.811628] .... register #00: 00000000 [ 5.814065] ....... : physical APIC id: 00 [ 5.817134] ....... : Delivery Type: 0 [ 5.818040] ....... : LTS : 0 [ 5.820158] .... register #01: 00170011 [ 5.821176] ....... : max redirection entries: 17 [ 5.824394] ....... : PRQ implemented: 0 [ 5.825391] ....... : IO APIC version: 11 [ 5.827479] .... register #02: 00000000 [ 5.830715] ....... : arbitration: 00 [ 5.831614] .... IRQ redirection table: [ 5.832597] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 5.839573] 00 00 1 0 0 0 0 0 0 00 [ 5.841132] 01 01 0 0 0 0 0 1 1 31 [ 5.842585] 02 01 0 0 0 0 0 1 1 30 [ 5.844002] 03 01 0 0 0 0 0 1 1 33 [ 5.847349] 04 01 1 0 0 0 0 1 1 34 [ 5.848766] 05 01 1 1 0 0 0 1 1 35 [ 5.851206] 06 01 0 0 0 0 0 1 1 36 [ 5.854898] 07 01 0 0 0 0 0 1 1 37 [ 5.857089] 08 01 0 0 0 0 0 1 1 38 [ 5.860976] 09 01 0 1 0 0 0 1 1 39 [ 5.862262] 0a 01 1 1 0 0 0 1 1 3A [ 5.876473] 0b 01 1 1 0 0 0 1 1 3B [ 5.877810] 0c 01 0 0 0 0 0 1 1 3C [ 5.879117] 0d 01 0 0 0 0 0 1 1 3D [ 5.880561] 0e 01 0 0 0 0 0 1 1 3E [ 5.881759] 0f 01 0 0 0 0 0 1 1 3F [ 5.883169] 10 00 1 0 0 0 0 0 0 00 [ 5.884689] 11 00 1 0 0 0 0 0 0 00 [ 5.885951] 12 00 1 0 0 0 0 0 0 00 [ 5.887267] 13 00 1 0 0 0 0 0 0 00 [ 5.888461] 14 00 1 0 0 0 0 0 0 00 [ 5.889644] 15 00 1 0 0 0 0 0 0 00 [ 5.891113] 16 00 1 0 0 0 0 0 0 00 [ 5.894526] 17 00 1 0 0 0 0 0 0 00 [ 5.895792] IRQ to pin mappings: [ 5.897714] IRQ0 -> 0:2 [ 5.900755] IRQ1 -> 0:1 [ 5.901375] IRQ3 -> 0:3 [ 5.901983] IRQ4 -> 0:4 [ 5.902597] IRQ5 -> 0:5 [ 5.906802] IRQ6 -> 0:6 [ 5.907438] IRQ7 -> 0:7 [ 5.908203] IRQ8 -> 0:8 [ 5.909051] IRQ9 -> 0:9 [ 5.910150] IRQ10 -> 0:10 [ 5.914281] IRQ11 -> 0:11 [ 5.915090] IRQ12 -> 0:12 [ 5.915878] IRQ13 -> 0:13 [ 5.916601] IRQ14 -> 0:14 [ 5.920370] IRQ15 -> 0:15 [ 5.921131] .................................... done. [ 5.939357] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 5.943219] registered taskstats version 1 [ 5.944719] raid6test: testing the 4-disk case... [ 5.946059] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK [ 5.947993] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(P) OK [ 5.949773] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(Q) OK [ 5.964928] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(P) OK [ 5.967127] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(Q) OK [ 5.968981] raid6test: test_disks(2, 3): faila= 2(P) failb= 3(Q) OK [ 5.971150] raid6test: testing the 5-disk case... [ 5.972573] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK [ 5.974577] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK [ 5.976460] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(P) OK [ 5.978585] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(Q) OK [ 5.993927] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK [ 5.995799] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(P) OK [ 5.997932] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(Q) OK [ 6.000171] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(P) OK [ 6.002077] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(Q) OK [ 6.004165] raid6test: test_disks(3, 4): faila= 3(P) failb= 4(Q) OK [ 6.006096] raid6test: testing the 11-disk case... [ 6.007631] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK [ 6.010530] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK [ 6.014736] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK [ 6.017663] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK [ 6.021929] raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK [ 6.037738] raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK [ 6.039505] raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK [ 6.041410] raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK [ 6.043227] raid6test: test_disks(0, 9): faila= 0(D) failb= 9(P) OK [ 6.045031] raid6test: test_disks(0, 10): faila= 0(D) failb= 10(Q) OK [ 6.047046] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK [ 6.048871] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK [ 6.050753] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK [ 6.052464] raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK [ 6.059564] raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK [ 6.061428] raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK [ 6.063546] raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK [ 6.067823] raid6test: test_disks(1, 9): faila= 1(D) failb= 9(P) OK [ 6.069510] raid6test: test_disks(1, 10): faila= 1(D) failb= 10(Q) OK [ 6.084709] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK [ 6.086625] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK [ 6.088779] raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK [ 6.090865] raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK [ 6.092804] raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK [ 6.094883] raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK [ 6.096641] raid6test: test_disks(2, 9): faila= 2(D) failb= 9(P) OK [ 6.111512] raid6test: test_disks(2, 10): faila= 2(D) failb= 10(Q) OK [ 6.113525] raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK [ 6.115192] raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK [ 6.117299] raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK [ 6.119252] raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK [ 6.121148] raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK [ 6.122833] raid6test: test_disks(3, 9): faila= 3(D) failb= 9(P) OK [ 6.124845] raid6test: test_disks(3, 10): faila= 3(D) failb= 10(Q) OK [ 6.127202] raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK [ 6.132159] raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK [ 6.147133] raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK [ 6.149149] raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK [ 6.151313] raid6test: test_disks(4, 9): faila= 4(D) failb= 9(P) OK [ 6.153506] raid6test: test_disks(4, 10): faila= 4(D) failb= 10(Q) OK [ 6.155454] raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK [ 6.157540] raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK [ 6.159477] raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK [ 6.168803] raid6test: test_disks(5, 9): faila= 5(D) failb= 9(P) OK [ 6.170886] raid6test: test_disks(5, 10): faila= 5(D) failb= 10(Q) OK [ 6.172856] raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK [ 6.174757] raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK [ 6.176497] raid6test: test_disks(6, 9): faila= 6(D) failb= 9(P) OK [ 6.191649] raid6test: test_disks(6, 10): faila= 6(D) failb= 10(Q) OK [ 6.193747] raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK [ 6.195669] raid6test: test_disks(7, 9): faila= 7(D) failb= 9(P) OK [ 6.197759] raid6test: test_disks(7, 10): faila= 7(D) failb= 10(Q) OK [ 6.199699] raid6test: test_disks(8, 9): faila= 8(D) failb= 9(P) OK [ 6.201553] raid6test: test_disks(8, 10): faila= 8(D) failb= 10(Q) OK [ 6.203611] raid6test: test_disks(9, 10): faila= 9(P) failb= 10(Q) OK [ 6.205527] raid6test: testing the 12-disk case... [ 6.220536] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK [ 6.222391] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK [ 6.224500] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK [ 6.226438] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK [ 6.228370] raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK [ 6.230195] raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK [ 6.232118] raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK [ 6.234049] raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK [ 6.237206] raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK [ 6.241074] raid6test: test_disks(0, 10): faila= 0(D) failb= 10(P) OK [ 6.244154] raid6test: test_disks(0, 11): faila= 0(D) failb= 11(Q) OK [ 6.248240] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK [ 6.251220] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK [ 6.255359] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK [ 6.264735] raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK [ 6.266806] raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK [ 6.268640] raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK [ 6.270688] raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK [ 6.274285] raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK [ 6.292378] raid6test: test_disks(1, 10): faila= 1(D) failb= 10(P) OK [ 6.294422] raid6test: test_disks(1, 11): faila= 1(D) failb= 11(Q) OK [ 6.296279] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK [ 6.298347] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK [ 6.300362] raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK [ 6.302162] raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK [ 6.304252] raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK [ 6.308077] raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK [ 6.311294] raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK [ 6.315117] raid6test: test_disks(2, 10): faila= 2(D) failb= 10(P) OK [ 6.330565] raid6test: test_disks(2, 11): faila= 2(D) failb= 11(Q) OK [ 6.332543] raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK [ 6.334571] raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK [ 6.336456] raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK [ 6.338514] raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK [ 6.340537] raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK [ 6.342449] raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK [ 6.344492] raid6test: test_disks(3, 10): faila= 3(D) failb= 10(P) OK [ 6.348207] raid6test: test_disks(3, 11): faila= 3(D) failb= 11(Q) OK [ 6.351743] raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK [ 6.355186] raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK [ 6.371531] raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK [ 6.373555] raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK [ 6.375392] raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK [ 6.377407] raid6test: test_disks(4, 10): faila= 4(D) failb= 10(P) OK [ 6.379320] raid6test: test_disks(4, 11): faila= 4(D) failb= 11(Q) OK [ 6.381333] raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK [ 6.383221] raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK [ 6.385235] raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK [ 6.388698] raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK [ 6.403888] raid6test: test_disks(5, 10): faila= 5(D) failb= 10(P) OK [ 6.405784] raid6test: test_disks(5, 11): faila= 5(D) failb= 11(Q) OK [ 6.407771] raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK [ 6.409567] raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK [ 6.411518] raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK [ 6.413328] raid6test: test_disks(6, 10): faila= 6(D) failb= 10(P) OK [ 6.415258] raid6test: test_disks(6, 11): faila= 6(D) failb= 11(Q) OK [ 6.417187] raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK [ 6.419011] raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK [ 6.434098] raid6test: test_disks(7, 10): faila= 7(D) failb= 10(P) OK [ 6.435936] raid6test: test_disks(7, 11): faila= 7(D) failb= 11(Q) OK [ 6.438016] raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK [ 6.439872] raid6test: test_disks(8, 10): faila= 8(D) failb= 10(P) OK [ 6.441787] raid6test: test_disks(8, 11): faila= 8(D) failb= 11(Q) OK [ 6.443752] raid6test: test_disks(9, 10): faila= 9(D) failb= 10(P) OK [ 6.445593] raid6test: test_disks(9, 11): faila= 9(D) failb= 11(Q) OK [ 6.447556] raid6test: test_disks(10, 11): faila= 10(P) failb= 11(Q) OK [ 6.451652] raid6test: testing the 16-disk case... [ 6.453849] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK [ 6.458410] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK [ 6.473615] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK [ 6.475206] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK [ 6.476915] raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK [ 6.478723] raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK [ 6.480543] raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK [ 6.482118] raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK [ 6.483883] raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK [ 6.485690] raid6test: test_disks(0, 10): faila= 0(D) failb= 10(D) OK [ 6.487595] raid6test: test_disks(0, 11): faila= 0(D) failb= 11(D) OK [ 6.490944] raid6test: test_disks(0, 12): faila= 0(D) failb= 12(D) OK [ 6.494300] raid6test: test_disks(0, 13): faila= 0(D) failb= 13(D) OK [ 6.497623] raid6test: test_disks(0, 14): faila= 0(D) failb= 14(P) OK [ 6.501050] raid6test: test_disks(0, 15): faila= 0(D) failb= 15(Q) OK [ 6.504589] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK [ 6.508108] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK [ 6.511448] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK [ 6.515131] raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK [ 6.531470] raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK [ 6.533260] raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK [ 6.534962] raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK [ 6.536611] raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK [ 6.538541] raid6test: test_disks(1, 10): faila= 1(D) failb= 10(D) OK [ 6.540397] raid6test: test_disks(1, 11): faila= 1(D) failb= 11(D) OK [ 6.541988] raid6test: test_disks(1, 12): faila= 1(D) failb= 12(D) OK [ 6.543756] raid6test: test_disks(1, 13): faila= 1(D) failb= 13(D) OK [ 6.545579] raid6test: test_disks(1, 14): faila= 1(D) failb= 14(P) OK [ 6.553857] raid6test: test_disks(1, 15): faila= 1(D) failb= 15(Q) OK [ 6.555699] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK [ 6.557705] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK [ 6.559545] raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK [ 6.574318] raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK [ 6.576152] raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK [ 6.578128] raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK [ 6.579932] raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK [ 6.581832] raid6test: test_disks(2, 10): faila= 2(D) failb= 10(D) OK [ 6.583703] raid6test: test_disks(2, 11): faila= 2(D) failb= 11(D) OK [ 6.585550] raid6test: test_disks(2, 12): faila= 2(D) failb= 12(D) OK [ 6.587544] raid6test: test_disks(2, 13): faila= 2(D) failb= 13(D) OK [ 6.589414] raid6test: test_disks(2, 14): faila= 2(D) failb= 14(P) OK [ 6.591429] raid6test: test_disks(2, 15): faila= 2(D) failb= 15(Q) OK [ 6.593300] raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK [ 6.595366] raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK [ 6.600180] raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK [ 6.602021] raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK [ 6.604081] raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK [ 6.605997] raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK [ 6.607959] raid6test: test_disks(3, 10): faila= 3(D) failb= 10(D) OK [ 6.609818] raid6test: test_disks(3, 11): faila= 3(D) failb= 11(D) OK [ 6.611974] raid6test: test_disks(3, 12): faila= 3(D) failb= 12(D) OK [ 6.614008] raid6test: test_disks(3, 13): faila= 3(D) failb= 13(D) OK [ 6.615961] raid6test: test_disks(3, 14): faila= 3(D) failb= 14(P) OK [ 6.618121] raid6test: test_disks(3, 15): faila= 3(D) failb= 15(Q) OK [ 6.619997] raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK [ 6.621963] raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK [ 6.623977] raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK [ 6.625876] raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK [ 6.627923] raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK [ 6.629801] raid6test: test_disks(4, 10): faila= 4(D) failb= 10(D) OK [ 6.631800] raid6test: test_disks(4, 11): faila= 4(D) failb= 11(D) OK [ 6.633823] raid6test: test_disks(4, 12): faila= 4(D) failb= 12(D) OK [ 6.635738] raid6test: test_disks(4, 13): faila= 4(D) failb= 13(D) OK [ 6.637705] raid6test: test_disks(4, 14): faila= 4(D) failb= 14(P) OK [ 6.639622] raid6test: test_disks(4, 15): faila= 4(D) failb= 15(Q) OK [ 6.641672] raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK [ 6.643652] raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK [ 6.645530] raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK [ 6.647487] raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK [ 6.649372] raid6test: test_disks(5, 10): faila= 5(D) failb= 10(D) OK [ 6.651400] raid6test: test_disks(5, 11): faila= 5(D) failb= 11(D) OK [ 6.653274] raid6test: test_disks(5, 12): faila= 5(D) failb= 12(D) OK [ 6.655262] raid6test: test_disks(5, 13): faila= 5(D) failb= 13(D) OK [ 6.657271] raid6test: test_disks(5, 14): faila= 5(D) failb= 14(P) OK [ 6.659105] raid6test: test_disks(5, 15): faila= 5(D) failb= 15(Q) OK [ 6.661095] raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK [ 6.662960] raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK [ 6.664940] raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK [ 6.666935] raid6test: test_disks(6, 10): faila= 6(D) failb= 10(D) OK [ 6.668886] raid6test: test_disks(6, 11): faila= 6(D) failb= 11(D) OK [ 6.671006] raid6test: test_disks(6, 12): faila= 6(D) failb= 12(D) OK [ 6.673046] raid6test: test_disks(6, 13): faila= 6(D) failb= 13(D) OK [ 6.675092] raid6test: test_disks(6, 14): faila= 6(D) failb= 14(P) OK [ 6.677308] raid6test: test_disks(6, 15): faila= 6(D) failb= 15(Q) OK [ 6.679192] raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK [ 6.681265] raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK [ 6.684370] raid6test: test_disks(7, 10): faila= 7(D) failb= 10(D) OK [ 6.687799] raid6test: test_disks(7, 11): faila= 7(D) failb= 11(D) OK [ 6.692339] raid6test: test_disks(7, 12): faila= 7(D) failb= 12(D) OK [ 6.695809] raid6test: test_disks(7, 13): faila= 7(D) failb= 13(D) OK [ 6.699700] raid6test: test_disks(7, 14): faila= 7(D) failb= 14(P) OK [ 6.703100] raid6test: test_disks(7, 15): faila= 7(D) failb= 15(Q) OK [ 6.706989] raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK [ 6.710304] raid6test: test_disks(8, 10): faila= 8(D) failb= 10(D) OK [ 6.715448] raid6test: test_disks(8, 11): faila= 8(D) failb= 11(D) OK [ 6.717662] raid6test: test_disks(8, 12): faila= 8(D) failb= 12(D) OK [ 6.722452] raid6test: test_disks(8, 13): faila= 8(D) failb= 13(D) OK [ 6.725319] raid6test: test_disks(8, 14): faila= 8(D) failb= 14(P) OK [ 6.728919] raid6test: test_disks(8, 15): faila= 8(D) failb= 15(Q) OK [ 6.732594] raid6test: test_disks(9, 10): faila= 9(D) failb= 10(D) OK [ 6.736322] raid6test: test_disks(9, 11): faila= 9(D) failb= 11(D) OK [ 6.743629] raid6test: test_disks(9, 12): faila= 9(D) failb= 12(D) OK [ 6.747102] raid6test: test_disks(9, 13): faila= 9(D) failb= 13(D) OK [ 6.750448] raid6test: test_disks(9, 14): faila= 9(D) failb= 14(P) OK [ 6.755447] raid6test: test_disks(9, 15): faila= 9(D) failb= 15(Q) OK [ 6.758845] raid6test: test_disks(10, 11): faila= 10(D) failb= 11(D) OK [ 6.762569] raid6test: test_disks(10, 12): faila= 10(D) failb= 12(D) OK [ 6.765910] raid6test: test_disks(10, 13): faila= 10(D) failb= 13(D) OK [ 6.769711] raid6test: test_disks(10, 14): faila= 10(D) failb= 14(P) OK [ 6.772990] raid6test: test_disks(10, 15): faila= 10(D) failb= 15(Q) OK [ 6.776961] raid6test: test_disks(11, 12): faila= 11(D) failb= 12(D) OK [ 6.782002] raid6test: test_disks(11, 13): faila= 11(D) failb= 13(D) OK [ 6.785325] raid6test: test_disks(11, 14): faila= 11(D) failb= 14(P) OK [ 6.789112] raid6test: test_disks(11, 15): faila= 11(D) failb= 15(Q) OK [ 6.792364] raid6test: test_disks(12, 13): faila= 12(D) failb= 13(D) OK [ 6.796215] raid6test: test_disks(12, 14): faila= 12(D) failb= 14(P) OK [ 6.799456] raid6test: test_disks(12, 15): faila= 12(D) failb= 15(Q) OK [ 6.803313] raid6test: test_disks(13, 14): faila= 13(D) failb= 14(P) OK [ 6.806546] raid6test: test_disks(13, 15): faila= 13(D) failb= 15(Q) OK [ 6.810393] raid6test: test_disks(14, 15): faila= 14(P) failb= 15(Q) OK [ 6.815272] raid6test: [ 6.815919] raid6test: complete (257 tests, 0 failures) [ 6.876253] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 6.881990] EDD information not available. [ 6.884687] debug: unmapping init memory ffffffff82ee2000..ffffffff82f7f000 [ 6.886312] Write protecting the kernel read-only data: 22528k [ 6.893087] debug: unmapping init memory ffff880001c77000..ffff880001e00000 [ 6.898856] debug: unmapping init memory ffff880002460000..ffff880002600000 /bin/sh: /proc/self/fd/9: No such file or directory /bin/sh: /proc/self/fd/9: No such file or directory /bin/sh: /proc/self/fd/9: No such file or directory BUG: kernel boot hang Elapsed time: 35 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-randconfig-s0-07220709/e6477000fced2c961c26fa42845bd388fdf95e79/vmlinuz-3.1.0-rc4-01469-ge647700 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-07220709/linux-devel:devel-hourly-2014072206:e6477000fced2c961c26fa42845bd388fdf95e79:bisect-linux1/.vmlinuz-e6477000fced2c961c26fa42845bd388fdf95e79-20140723092146-119-ivb41 branch=linux-devel/devel-hourly-2014072206 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-07220709/e6477000fced2c961c26fa42845bd388fdf95e79/vmlinuz-3.1.0-rc4-01469-ge647700 drbd.minor_count=8' -initrd /kernel-tests/initrd/quantal-core-x86_64.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-ivb41-100 -serial file:/dev/shm/kboot/serial-quantal-ivb41-100 -daemonize -display none -monitor null
Attachment:
x86_64-randconfig-s0-07220709-eee4ca37c17a74bc97c899b0e68a36ff0f17392a-BUG:-unable-to-handle-kernel-NULL-pointer-dereference-75630.log
Description: Binary data
# # Automatically generated file; DO NOT EDIT. # Linux/x86_64 3.1.0-rc4 Kernel Configuration # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y CONFIG_HAVE_IRQ_WORK=y CONFIG_IRQ_WORK=y # # General setup # # CONFIG_EXPERIMENTAL is not set CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y # CONFIG_KERNEL_GZIP is not set CONFIG_KERNEL_BZIP2=y # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_XZ is not set # CONFIG_KERNEL_LZO is not set CONFIG_DEFAULT_HOSTNAME="(none)" # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_FHANDLE=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y # CONFIG_TASK_XACCT is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set CONFIG_HAVE_GENERIC_HARDIRQS=y # # IRQ subsystem # CONFIG_GENERIC_HARDIRQS=y CONFIG_HAVE_SPARSE_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y # # RCU Subsystem # CONFIG_TINY_RCU=y # CONFIG_PREEMPT_RCU is not set CONFIG_RCU_TRACE=y # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y # CONFIG_CGROUPS is not set # CONFIG_NAMESPACES is not set # CONFIG_SCHED_AUTOGROUP is not set # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set # CONFIG_RD_XZ is not set # CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_ANON_INODES=y CONFIG_EXPERT=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set # CONFIG_PCSPKR_PLATFORM is not set CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_EMBEDDED=y CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_PERF_COUNTERS is not set CONFIG_DEBUG_PERF_USE_VMALLOC=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_PCI_QUIRKS=y # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y # CONFIG_PROFILING is not set CONFIG_TRACEPOINTS=y CONFIG_HAVE_OPROFILE=y # CONFIG_JUMP_LABEL is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_USER_RETURN_NOTIFIER=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y # # GCOV-based kernel profiling # CONFIG_GCOV_KERNEL=y CONFIG_GCOV_PROFILE_ALL=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y # CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y # CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PREEMPT_NOTIFIERS=y # CONFIG_INLINE_SPIN_TRYLOCK is not set # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set # CONFIG_INLINE_SPIN_LOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK_IRQ is not set # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set # CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set # CONFIG_INLINE_READ_LOCK is not set # CONFIG_INLINE_READ_LOCK_BH is not set # CONFIG_INLINE_READ_LOCK_IRQ is not set # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set # CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set # CONFIG_INLINE_WRITE_LOCK is not set # CONFIG_INLINE_WRITE_LOCK_BH is not set # CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set # CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # # Processor type and features # CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_SMP is not set CONFIG_X86_MPPARSE=y CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_VSMP is not set # CONFIG_SCHED_OMIT_FRAME_POINTER is not set CONFIG_PARAVIRT_GUEST=y CONFIG_PARAVIRT_TIME_ACCOUNTING=y CONFIG_XEN=y CONFIG_XEN_DOM0=y CONFIG_XEN_PRIVILEGED_GUEST=y CONFIG_XEN_PVHVM=y CONFIG_XEN_MAX_DOMAIN_MEMORY=128 CONFIG_XEN_SAVE_RESTORE=y # CONFIG_XEN_DEBUG_FS is not set # CONFIG_XEN_DEBUG is not set CONFIG_KVM_CLOCK=y CONFIG_KVM_GUEST=y CONFIG_PARAVIRT=y CONFIG_PARAVIRT_CLOCK=y # CONFIG_PARAVIRT_DEBUG is not set CONFIG_NO_BOOTMEM=y # CONFIG_MEMTEST is not set # CONFIG_MK8 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_MATOM is not set CONFIG_GENERIC_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_CMPXCHG=y CONFIG_CMPXCHG_LOCAL=y CONFIG_CMPXCHG_DOUBLE=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_PROCESSOR_SELECT=y CONFIG_CPU_SUP_INTEL=y # CONFIG_CPU_SUP_AMD is not set CONFIG_CPU_SUP_CENTAUR=y CONFIG_HPET_TIMER=y # CONFIG_DMI is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y CONFIG_NR_CPUS=1 CONFIG_IRQ_TIME_ACCOUNTING=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_PREEMPT_COUNT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y # CONFIG_X86_MCE is not set # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y # CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y # CONFIG_X86_MSR is not set CONFIG_X86_CPUID=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y # CONFIG_DIRECT_GBPAGES is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_MEMBLOCK=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_COMPACTION=y CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MMU_NOTIFIER=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set CONFIG_NEED_PER_CPU_KM=y CONFIG_CLEANCACHE=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y # CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW=64 # CONFIG_MTRR is not set # CONFIG_EFI is not set # CONFIG_SECCOMP is not set CONFIG_CC_STACKPROTECTOR=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x1000000 # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management and ACPI options # CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATE_CALLBACKS=y CONFIG_PM_SLEEP=y CONFIG_PM_RUNTIME=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y # CONFIG_ACPI_EC_DEBUGFS is not set CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_SBS is not set # CONFIG_ACPI_HED is not set # CONFIG_ACPI_CUSTOM_METHOD is not set # CONFIG_ACPI_APEI is not set # CONFIG_SFI is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y # CONFIG_CPU_FREQ_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # x86 CPU frequency scaling drivers # # CONFIG_X86_PCC_CPUFREQ is not set # CONFIG_X86_ACPI_CPUFREQ is not set # CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set CONFIG_X86_P4_CLOCKMOD=y # # shared options # CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y # CONFIG_INTEL_IDLE is not set # # Memory power savings # # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_MMCONFIG is not set CONFIG_PCI_XEN=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set CONFIG_XEN_PCIDEV_FRONTEND=y CONFIG_HT_IRQ=y # CONFIG_PCI_IOV is not set CONFIG_PCI_IOAPIC=y CONFIG_PCI_LABEL=y CONFIG_ISA_DMA_API=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_RAPIDIO is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IA32_EMULATION is not set # CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set CONFIG_HAVE_TEXT_POKE_SMP=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_NET_KEY=y # CONFIG_INET is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y CONFIG_NETFILTER_DEBUG=y CONFIG_NETFILTER_ADVANCED=y CONFIG_ATM=y # CONFIG_ATM_LANE is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set CONFIG_DECNET=y CONFIG_LLC=y CONFIG_LLC2=y # CONFIG_IPX is not set CONFIG_ATALK=y CONFIG_DEV_APPLETALK=y CONFIG_IPDDP=y CONFIG_IPDDP_ENCAP=y # CONFIG_IPDDP_DECAP is not set # CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_DCB=y CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=y CONFIG_BATMAN_ADV_DEBUG=y CONFIG_HAVE_BPF_JIT=y # # Network testing # # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set CONFIG_BT=y # CONFIG_BT_L2CAP is not set # CONFIG_BT_SCO is not set # # Bluetooth device drivers # # CONFIG_BT_HCIUART is not set CONFIG_BT_HCIVHCI=y CONFIG_BT_MRVL=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_LIB80211 is not set # # CFG80211 needs to be enabled for MAC80211 # # CONFIG_WIMAX is not set CONFIG_RFKILL=y CONFIG_RFKILL_LEDS=y # CONFIG_RFKILL_INPUT is not set CONFIG_RFKILL_REGULATOR=y CONFIG_NET_9P=y CONFIG_NET_9P_VIRTIO=y # CONFIG_NET_9P_DEBUG is not set CONFIG_CAIF=y # CONFIG_CAIF_DEBUG is not set CONFIG_CAIF_NETDEV=y # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="" # CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set CONFIG_DEBUG_DEVRES=y CONFIG_SYS_HYPERVISOR=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_CONNECTOR=y # CONFIG_PROC_EVENTS is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_AR7_PARTS=y # # User Modules And Translation Layers # # CONFIG_MTD_CHAR is not set CONFIG_HAVE_MTD_OTP=y CONFIG_MTD_BLKDEVS=y # CONFIG_MTD_BLOCK is not set CONFIG_MTD_BLOCK_RO=y # CONFIG_FTL is not set # CONFIG_NFTL is not set CONFIG_INFTL=y CONFIG_RFD_FTL=y CONFIG_SSFDC=y CONFIG_MTD_OOPS=y # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set CONFIG_MTD_CFI_STAA=y CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y CONFIG_MTD_ROM=y CONFIG_MTD_ABSENT=y # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_COMPAT=y CONFIG_MTD_PHYSMAP_START=0x8000000 CONFIG_MTD_PHYSMAP_LEN=0 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_SC520CDP is not set # CONFIG_MTD_NETSC520 is not set # CONFIG_MTD_TS5500 is not set CONFIG_MTD_SBC_GXX=y # CONFIG_MTD_AMD76XROM is not set CONFIG_MTD_ICHXROM=y # CONFIG_MTD_ESB2ROM is not set # CONFIG_MTD_CK804XROM is not set # CONFIG_MTD_SCB2_FLASH is not set # CONFIG_MTD_NETtel is not set CONFIG_MTD_L440GX=y # CONFIG_MTD_PCI is not set # CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set CONFIG_MTD_LATCH_ADDR=y # # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_SST25L is not set CONFIG_MTD_SLRAM=y # CONFIG_MTD_PHRAM is not set CONFIG_MTD_MTDRAM=y CONFIG_MTDRAM_TOTAL_SIZE=4096 CONFIG_MTDRAM_ERASE_SIZE=128 CONFIG_MTDRAM_ABS_POS=0 # CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_NAND_ECC=y CONFIG_MTD_NAND_ECC_SMC=y CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set CONFIG_MTD_NAND_BCH=y CONFIG_MTD_NAND_ECC_BCH=y # CONFIG_MTD_SM_COMMON is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_DENALI=y CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018 CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_RICOH is not set # CONFIG_MTD_NAND_CAFE is not set CONFIG_MTD_NAND_NANDSIM=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=y CONFIG_MTD_ONENAND_OTP=y # CONFIG_MTD_ONENAND_2X_PROGRAM is not set # CONFIG_MTD_ONENAND_SIM is not set # # LPDDR flash memory drivers # CONFIG_MTD_LPDDR=y CONFIG_MTD_QINFO_PROBE=y # CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_PNP=y CONFIG_PNP_DEBUG_MESSAGES=y # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # # DRBD disabled because PROC_FS, INET or CONNECTOR not selected # # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_OSD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_XEN_BLKDEV_FRONTEND=y # CONFIG_XEN_BLKDEV_BACKEND is not set # CONFIG_BLK_DEV_HD is not set # CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_ATAPI=y CONFIG_BLK_DEV_IDE_SATA=y CONFIG_IDE_GD=y # CONFIG_IDE_GD_ATA is not set # CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set CONFIG_BLK_DEV_IDETAPE=y # CONFIG_BLK_DEV_IDEACPI is not set CONFIG_IDE_TASK_IOCTL=y # # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set CONFIG_BLK_DEV_PLATFORM=y # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set # # PCI IDE chipsets support # # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_RZ1000 is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_BLK_DEV_IDEDMA is not set # # SCSI device support # CONFIG_SCSI_MOD=y CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_NETLINK=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_CHR_DEV_OSST=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=y CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_SCSI_DH=y CONFIG_SCSI_DH_RDAC=y CONFIG_SCSI_DH_HP_SW=y CONFIG_SCSI_DH_EMC=y CONFIG_SCSI_OSD_INITIATOR=y CONFIG_SCSI_OSD_ULD=y CONFIG_SCSI_OSD_DPRINT_SENSE=1 # CONFIG_SCSI_OSD_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # # CONFIG_SATA_AHCI is not set CONFIG_SATA_AHCI_PLATFORM=y # CONFIG_SATA_INIC162X is not set # CONFIG_SATA_ACARD_AHCI is not set # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_SVW is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # # PATA SFF controllers with BMDMA # # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_ATP867X is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_EFAR is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SCH is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # # PIO-only SFF controllers # # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_NS87410 is not set CONFIG_PATA_PLATFORM=y # CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # # CONFIG_PATA_ACPI is not set # CONFIG_ATA_GENERIC is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set CONFIG_MD_RAID1=y CONFIG_MD_RAID10=y CONFIG_MD_RAID456=y # CONFIG_MD_MULTIPATH is not set CONFIG_MD_FAULTY=y CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=y CONFIG_DM_SNAPSHOT=y CONFIG_DM_MIRROR=y CONFIG_DM_ZERO=y CONFIG_DM_MULTIPATH=y # CONFIG_DM_MULTIPATH_QL is not set CONFIG_DM_MULTIPATH_ST=y # CONFIG_TARGET_CORE is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_FIREWIRE_NOSY is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set # CONFIG_NETDEVICES is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=y CONFIG_INPUT_SPARSEKMAP=y # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_JOYDEV=y # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ADP5520=y CONFIG_KEYBOARD_ADP5588=y CONFIG_KEYBOARD_ADP5589=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_LKKBD is not set CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_GPIO_POLLED=y CONFIG_KEYBOARD_TCA6416=y # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set CONFIG_KEYBOARD_MAX7359=y CONFIG_KEYBOARD_MCS=y CONFIG_KEYBOARD_MPR121=y CONFIG_KEYBOARD_NEWTON=y # CONFIG_KEYBOARD_OPENCORES is not set CONFIG_KEYBOARD_STOWAWAY=y CONFIG_KEYBOARD_SUNKBD=y # CONFIG_KEYBOARD_TC3589X is not set CONFIG_KEYBOARD_TWL4030=y CONFIG_KEYBOARD_XTKBD=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y # CONFIG_MOUSE_PS2_TRACKPOINT is not set CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_PS2_SENTELIC=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set CONFIG_MOUSE_VSXXXAA=y CONFIG_MOUSE_GPIO=y # CONFIG_MOUSE_SYNAPTICS_I2C is not set CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=y CONFIG_JOYSTICK_A3D=y # CONFIG_JOYSTICK_ADI is not set CONFIG_JOYSTICK_COBRA=y CONFIG_JOYSTICK_GF2K=y # CONFIG_JOYSTICK_GRIP is not set CONFIG_JOYSTICK_GRIP_MP=y CONFIG_JOYSTICK_GUILLEMOT=y CONFIG_JOYSTICK_INTERACT=y CONFIG_JOYSTICK_SIDEWINDER=y CONFIG_JOYSTICK_TMDC=y CONFIG_JOYSTICK_IFORCE=y # CONFIG_JOYSTICK_IFORCE_232 is not set CONFIG_JOYSTICK_WARRIOR=y # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set CONFIG_JOYSTICK_SPACEBALL=y CONFIG_JOYSTICK_STINGER=y CONFIG_JOYSTICK_TWIDJOY=y CONFIG_JOYSTICK_ZHENHUA=y CONFIG_JOYSTICK_AS5011=y # CONFIG_JOYSTICK_JOYDUMP is not set # CONFIG_JOYSTICK_XPAD is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_88PM860X=y CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_TOUCHSCREEN_AD7877=y # CONFIG_TOUCHSCREEN_AD7879 is not set CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_TOUCHSCREEN_BU21013=y CONFIG_TOUCHSCREEN_CY8CTMG110=y # CONFIG_TOUCHSCREEN_DYNAPRO is not set CONFIG_TOUCHSCREEN_HAMPSHIRE=y CONFIG_TOUCHSCREEN_EETI=y CONFIG_TOUCHSCREEN_FUJITSU=y # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set CONFIG_TOUCHSCREEN_WACOM_W8001=y CONFIG_TOUCHSCREEN_MAX11801=y CONFIG_TOUCHSCREEN_MCS5000=y CONFIG_TOUCHSCREEN_MTOUCH=y CONFIG_TOUCHSCREEN_INEXIO=y # CONFIG_TOUCHSCREEN_MK712 is not set CONFIG_TOUCHSCREEN_PENMOUNT=y CONFIG_TOUCHSCREEN_TOUCHRIGHT=y CONFIG_TOUCHSCREEN_TOUCHWIN=y CONFIG_TOUCHSCREEN_WM831X=y # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set CONFIG_TOUCHSCREEN_MC13783=y # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set CONFIG_TOUCHSCREEN_TSC2005=y # CONFIG_TOUCHSCREEN_TSC2007 is not set CONFIG_TOUCHSCREEN_PCAP=y CONFIG_TOUCHSCREEN_ST1232=y CONFIG_TOUCHSCREEN_TPS6507X=y # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=y CONFIG_SERIO_ALTERA_PS2=y CONFIG_SERIO_PS2MULT=y CONFIG_GAMEPORT=y CONFIG_GAMEPORT_NS558=y # CONFIG_GAMEPORT_L4 is not set # CONFIG_GAMEPORT_EMU10K1 is not set # CONFIG_GAMEPORT_FM801 is not set # # Character devices # # CONFIG_VT is not set # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_SYNCLINK is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set # CONFIG_ISI is not set CONFIG_N_HDLC=y # CONFIG_TRACE_ROUTER is not set CONFIG_TRACE_SINK=y CONFIG_DEVKMEM=y # CONFIG_STALDRV is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y # CONFIG_SERIAL_8250_SHARE_IRQ is not set # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # CONFIG_SERIAL_MAX3100=y # CONFIG_SERIAL_MAX3107 is not set # CONFIG_SERIAL_MFD_HSU is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set CONFIG_SERIAL_ALTERA_UART=y CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4 CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200 CONFIG_SERIAL_ALTERA_UART_CONSOLE=y # CONFIG_SERIAL_PCH_UART is not set # CONFIG_SERIAL_XILINX_PS_UART is not set CONFIG_TTY_PRINTK=y CONFIG_HVC_DRIVER=y # CONFIG_HVC_XEN is not set CONFIG_VIRTIO_CONSOLE=y CONFIG_IPMI_HANDLER=y # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=y CONFIG_IPMI_SI=y CONFIG_IPMI_WATCHDOG=y CONFIG_IPMI_POWEROFF=y CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_INTEL=y CONFIG_HW_RANDOM_AMD=y # CONFIG_HW_RANDOM_VIA is not set # CONFIG_HW_RANDOM_VIRTIO is not set CONFIG_NVRAM=y # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set CONFIG_R3964=y # CONFIG_APPLICOM is not set CONFIG_MWAVE=y CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_HPET is not set CONFIG_HANGCHECK_TIMER=y CONFIG_DEVPORT=y # CONFIG_RAMOOPS is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIAPRO is not set # # ACPI drivers # # CONFIG_I2C_SCMI is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_GPIO=y # CONFIG_I2C_INTEL_MID is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=y # CONFIG_I2C_EG20T is not set # # External I2C/SMBus adapter drivers # CONFIG_I2C_PARPORT_LIGHT=y # # Other I2C/SMBus bus drivers # # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_ALTERA=y CONFIG_SPI_BITBANG=y # CONFIG_SPI_GPIO is not set CONFIG_SPI_OC_TINY=y # CONFIG_SPI_PXA2XX_PCI is not set # CONFIG_SPI_TOPCLIFF_PCH is not set # CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters # CONFIG_SPI_TLE62X0=y # # PPS support # # # PPS generators support # # # PTP clock support # # # Enable Device Drivers -> PPS to see the PTP clock options. # CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set CONFIG_GPIO_GENERIC=y CONFIG_GPIO_MAX730X=y # # Memory mapped GPIO drivers: # CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_GPIO_IT8761E=y # CONFIG_GPIO_SCH is not set # CONFIG_GPIO_VX855 is not set # # I2C GPIO expanders: # CONFIG_GPIO_MAX7300=y CONFIG_GPIO_MAX732X=y # CONFIG_GPIO_MAX732X_IRQ is not set # CONFIG_GPIO_PCA953X is not set CONFIG_GPIO_PCF857X=y CONFIG_GPIO_SX150X=y # CONFIG_GPIO_TC3589X is not set CONFIG_GPIO_TPS65912=y CONFIG_GPIO_TWL4030=y CONFIG_GPIO_WM831X=y # CONFIG_GPIO_ADP5520 is not set CONFIG_GPIO_ADP5588=y CONFIG_GPIO_ADP5588_IRQ=y # # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set # CONFIG_GPIO_PCH is not set # CONFIG_GPIO_ML_IOH is not set # CONFIG_GPIO_RDC321X is not set # # SPI GPIO expanders: # CONFIG_GPIO_MAX7301=y # CONFIG_GPIO_MCP23S08 is not set # CONFIG_GPIO_MC33880 is not set # CONFIG_GPIO_74X164 is not set # # AC97 GPIO expanders: # # # MODULbus GPIO expanders: # CONFIG_GPIO_TPS65910=y CONFIG_W1=y CONFIG_W1_CON=y # # 1-wire Bus Masters # # CONFIG_W1_MASTER_MATROX is not set CONFIG_W1_MASTER_DS1WM=y CONFIG_W1_MASTER_GPIO=y # # 1-wire Slaves # CONFIG_W1_SLAVE_THERM=y # CONFIG_W1_SLAVE_SMEM is not set # CONFIG_W1_SLAVE_DS2408 is not set CONFIG_W1_SLAVE_DS2423=y # CONFIG_W1_SLAVE_DS2431 is not set # CONFIG_W1_SLAVE_DS2433 is not set CONFIG_W1_SLAVE_DS2760=y CONFIG_W1_SLAVE_DS2780=y # CONFIG_W1_SLAVE_BQ27000 is not set CONFIG_POWER_SUPPLY=y CONFIG_POWER_SUPPLY_DEBUG=y CONFIG_PDA_POWER=y # CONFIG_WM831X_BACKUP is not set CONFIG_WM831X_POWER=y # CONFIG_TEST_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_DS2780 is not set CONFIG_BATTERY_DS2782=y # CONFIG_BATTERY_BQ20Z75 is not set # CONFIG_BATTERY_BQ27x00 is not set CONFIG_BATTERY_MAX17040=y CONFIG_BATTERY_MAX17042=y CONFIG_CHARGER_PCF50633=y # CONFIG_CHARGER_MAX8903 is not set CONFIG_CHARGER_TWL4030=y # CONFIG_CHARGER_GPIO is not set CONFIG_CHARGER_MAX8998=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y # # Broadcom specific AMBA # CONFIG_BCMA=y CONFIG_BCMA_HOST_PCI_POSSIBLE=y CONFIG_BCMA_HOST_PCI=y # CONFIG_BCMA_DEBUG is not set CONFIG_MFD_SUPPORT=y CONFIG_MFD_CORE=y CONFIG_MFD_88PM860X=y CONFIG_MFD_SM501=y # CONFIG_MFD_SM501_GPIO is not set # CONFIG_HTC_PASIC3 is not set CONFIG_HTC_I2CPLD=y # CONFIG_TPS6105X is not set # CONFIG_TPS65010 is not set # CONFIG_TPS6507X is not set # CONFIG_MFD_TPS6586X is not set CONFIG_MFD_TPS65910=y CONFIG_MFD_TPS65912=y CONFIG_MFD_TPS65912_I2C=y CONFIG_MFD_TPS65912_SPI=y CONFIG_TWL4030_CORE=y # CONFIG_TWL4030_MADC is not set # CONFIG_MFD_TWL4030_AUDIO is not set # CONFIG_TWL6030_PWM is not set # CONFIG_TWL6040_CORE is not set # CONFIG_MFD_STMPE is not set CONFIG_MFD_TC3589X=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set CONFIG_PMIC_ADP5520=y # CONFIG_MFD_MAX8925 is not set CONFIG_MFD_MAX8997=y CONFIG_MFD_MAX8998=y CONFIG_MFD_WM8400=y CONFIG_MFD_WM831X=y CONFIG_MFD_WM831X_I2C=y # CONFIG_MFD_WM831X_SPI is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set CONFIG_MFD_PCF50633=y # CONFIG_PCF50633_ADC is not set # CONFIG_PCF50633_GPIO is not set CONFIG_MFD_MC13783=y CONFIG_MFD_MC13XXX=y # CONFIG_ABX500_CORE is not set CONFIG_EZX_PCAP=y # CONFIG_MFD_CS5535 is not set # CONFIG_MFD_TIMBERDALE is not set # CONFIG_LPC_SCH is not set # CONFIG_MFD_RDC321X is not set # CONFIG_MFD_JANZ_CMODIO is not set # CONFIG_MFD_VX855 is not set CONFIG_MFD_WL1273_CORE=y CONFIG_MFD_AAT2870_CORE=y CONFIG_REGULATOR=y CONFIG_REGULATOR_DEBUG=y # CONFIG_REGULATOR_DUMMY is not set CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_USERSPACE_CONSUMER=y # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set CONFIG_REGULATOR_MAX8649=y CONFIG_REGULATOR_MAX8660=y CONFIG_REGULATOR_MAX8952=y # CONFIG_REGULATOR_MAX8997 is not set CONFIG_REGULATOR_MAX8998=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_WM831X=y CONFIG_REGULATOR_WM8400=y # CONFIG_REGULATOR_PCF50633 is not set CONFIG_REGULATOR_LP3971=y CONFIG_REGULATOR_LP3972=y # CONFIG_REGULATOR_PCAP is not set CONFIG_REGULATOR_MC13XXX_CORE=y CONFIG_REGULATOR_MC13783=y # CONFIG_REGULATOR_MC13892 is not set CONFIG_REGULATOR_TPS65023=y # CONFIG_REGULATOR_TPS6507X is not set CONFIG_REGULATOR_TPS65912=y # CONFIG_REGULATOR_88PM8607 is not set CONFIG_REGULATOR_ISL6271A=y CONFIG_REGULATOR_AD5398=y CONFIG_REGULATOR_TPS6524X=y CONFIG_REGULATOR_TPS65910=y # CONFIG_REGULATOR_AAT2870 is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_VGA_SWITCHEROO is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set # CONFIG_STUB_POULSBO is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_L4F00242T03 is not set # CONFIG_LCD_LMS283GF05 is not set CONFIG_LCD_LTV350QV=y CONFIG_LCD_ILI9320=y CONFIG_LCD_TDO24M=y CONFIG_LCD_VGG2432A4=y CONFIG_LCD_PLATFORM=y CONFIG_LCD_S6E63M0=y CONFIG_LCD_LD9040=y CONFIG_LCD_AMS369FG06=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set # CONFIG_BACKLIGHT_PROGEAR is not set # CONFIG_BACKLIGHT_APPLE is not set # CONFIG_BACKLIGHT_SAHARA is not set CONFIG_BACKLIGHT_WM831X=y # CONFIG_BACKLIGHT_ADP5520 is not set CONFIG_BACKLIGHT_ADP8860=y # CONFIG_BACKLIGHT_ADP8870 is not set CONFIG_BACKLIGHT_88PM860X=y CONFIG_BACKLIGHT_PCF50633=y # CONFIG_BACKLIGHT_AAT2870 is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y # CONFIG_SOUND_OSS_CORE_PRECLAIM is not set CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_JACK=y CONFIG_SND_SEQUENCER=y CONFIG_SND_SEQ_DUMMY=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y # CONFIG_SND_PCM_OSS is not set # CONFIG_SND_SEQUENCER_OSS is not set CONFIG_SND_HRTIMER=y # CONFIG_SND_SEQ_HRTIMER_DEFAULT is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set CONFIG_SND_DMA_SGBUF=y # CONFIG_SND_RAWMIDI_SEQ is not set # CONFIG_SND_OPL3_LIB_SEQ is not set # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_DRIVERS is not set CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ASIHPI is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_INDIGOIOX is not set # CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_LOLA is not set # CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set CONFIG_SND_SPI=y CONFIG_SND_SOC=y # CONFIG_SND_SOC_CACHE_LZO is not set CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_SND_SOC_ALL_CODECS is not set # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HIDRAW=y # CONFIG_HID_PID is not set # # Special HID drivers # CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # CONFIG_LEDS_88PM860X=y CONFIG_LEDS_LM3530=y # CONFIG_LEDS_ALIX2 is not set CONFIG_LEDS_GPIO=y CONFIG_LEDS_LP3944=y CONFIG_LEDS_LP5521=y # CONFIG_LEDS_LP5523 is not set CONFIG_LEDS_PCA955X=y CONFIG_LEDS_WM831X_STATUS=y # CONFIG_LEDS_DAC124S085 is not set CONFIG_LEDS_REGULATOR=y # CONFIG_LEDS_BD2802 is not set CONFIG_LEDS_LT3593=y CONFIG_LEDS_ADP5520=y CONFIG_LEDS_MC13783=y CONFIG_LEDS_TRIGGERS=y # # LED Triggers # CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_BACKLIGHT=y CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) # CONFIG_ACCESSIBILITY=y # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set CONFIG_UIO=y # CONFIG_UIO_CIF is not set # CONFIG_UIO_PDRV is not set # CONFIG_UIO_PDRV_GENIRQ is not set # CONFIG_UIO_AEC is not set # CONFIG_UIO_SERCOS3 is not set # CONFIG_UIO_PCI_GENERIC is not set # CONFIG_UIO_NETX is not set CONFIG_VIRTIO=y CONFIG_VIRTIO_RING=y # # Virtio drivers # CONFIG_VIRTIO_BALLOON=y # # Xen driver support # # CONFIG_XEN_BALLOON is not set CONFIG_XEN_DEV_EVTCHN=y CONFIG_XEN_BACKEND=y CONFIG_XENFS=y # CONFIG_XEN_COMPAT_XENFS is not set CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=y CONFIG_XEN_GNTDEV=y # CONFIG_XEN_GRANT_DEV_ALLOC is not set CONFIG_XEN_PLATFORM_PCI=y CONFIG_SWIOTLB_XEN=y CONFIG_XEN_TMEM=y CONFIG_XEN_PCIDEV_BACKEND=y CONFIG_STAGING=y CONFIG_ECHO=y # CONFIG_RTS_PSTOR is not set # CONFIG_POHMELFS is not set # CONFIG_IDE_PHISON is not set # CONFIG_DRM_NOUVEAU is not set # CONFIG_VME_BUS is not set # CONFIG_DX_SEP is not set CONFIG_IIO=y CONFIG_IIO_BUFFER=y CONFIG_IIO_SW_RING=y CONFIG_IIO_KFIFO_BUF=y CONFIG_IIO_TRIGGER=y CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 # # Accelerometers # # CONFIG_ADIS16201 is not set CONFIG_ADIS16203=y # CONFIG_ADIS16204 is not set # CONFIG_ADIS16209 is not set CONFIG_ADIS16220=y CONFIG_ADIS16240=y CONFIG_KXSD9=y CONFIG_LIS3L02DQ=y CONFIG_LIS3L02DQ_BUF_KFIFO=y # CONFIG_LIS3L02DQ_BUF_RING_SW is not set CONFIG_SCA3000=y # # Analog to digital convertors # CONFIG_AD7150=y CONFIG_AD7152=y CONFIG_AD7291=y # CONFIG_AD7298 is not set # CONFIG_AD7606 is not set CONFIG_AD799X=y CONFIG_AD799X_RING_BUFFER=y # CONFIG_AD7476 is not set # CONFIG_AD7887 is not set # CONFIG_AD7780 is not set CONFIG_AD7793=y CONFIG_AD7746=y # CONFIG_AD7816 is not set CONFIG_AD7192=y # CONFIG_ADT7310 is not set # CONFIG_ADT7410 is not set CONFIG_AD7280=y # CONFIG_MAX1363 is not set # # Analog digital bi-direction convertors # CONFIG_ADT7316=y # CONFIG_ADT7316_SPI is not set CONFIG_ADT7316_I2C=y # # Digital to analog convertors # CONFIG_AD5624R_SPI=y # CONFIG_AD5446 is not set # CONFIG_AD5504 is not set CONFIG_AD5791=y CONFIG_AD5686=y # # Direct Digital Synthesis # CONFIG_AD5930=y CONFIG_AD9832=y CONFIG_AD9834=y CONFIG_AD9850=y CONFIG_AD9852=y CONFIG_AD9910=y CONFIG_AD9951=y # # Digital gyroscope sensors # CONFIG_ADIS16060=y CONFIG_ADIS16080=y CONFIG_ADIS16130=y # CONFIG_ADIS16260 is not set CONFIG_ADXRS450=y # # Network Analyzer, Impedance Converters # CONFIG_AD5933=y # # Inertial measurement units # CONFIG_ADIS16400=y # # Light sensors # CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_TSL2563=y CONFIG_TSL2583=y # # Magnetometer sensors # # CONFIG_SENSORS_AK8975 is not set CONFIG_SENSORS_HMC5843=y # # Active energy metering IC # # CONFIG_ADE7753 is not set CONFIG_ADE7754=y CONFIG_ADE7758=y # CONFIG_ADE7759 is not set # CONFIG_ADE7854 is not set # # Resolver to digital converters # # CONFIG_AD2S90 is not set # CONFIG_AD2S1200 is not set CONFIG_AD2S1210=y # # Triggers - standalone # # CONFIG_IIO_GPIO_TRIGGER is not set # CONFIG_IIO_SYSFS_TRIGGER is not set CONFIG_IIO_SIMPLE_DUMMY=y # CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set # CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set # CONFIG_XVMALLOC is not set # CONFIG_ZRAM is not set # CONFIG_ZCACHE is not set # CONFIG_CRYSTALHD is not set # CONFIG_ACPI_QUICKSTART is not set CONFIG_FT1000=y # # Speakup console speech # CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=y # CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set # CONFIG_DRM_PSB is not set CONFIG_ALTERA_STAPL=y CONFIG_X86_PLATFORM_DEVICES=y # CONFIG_ACERHDF is not set # CONFIG_ASUS_LAPTOP is not set # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_HP_ACCEL is not set # CONFIG_MSI_LAPTOP is not set # CONFIG_PANASONIC_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_IDEAPAD_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_TOPSTAR_LAPTOP is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_TOSHIBA_BT_RFKILL is not set # CONFIG_ACPI_CMPC is not set # CONFIG_INTEL_IPS is not set # CONFIG_IBM_RTL is not set # CONFIG_XO15_EBOOK is not set CONFIG_SAMSUNG_LAPTOP=y # CONFIG_INTEL_OAKTRAIL is not set # CONFIG_SAMSUNG_Q10 is not set CONFIG_CLKEVT_I8253=y CONFIG_CLKBLD_I8253=y # CONFIG_IOMMU_SUPPORT is not set # CONFIG_VIRT_DRIVERS is not set # CONFIG_HYPERV is not set # # Firmware Drivers # CONFIG_EDD=y # CONFIG_EDD_OFF is not set # CONFIG_FIRMWARE_MEMMAP is not set CONFIG_DELL_RBU=y # CONFIG_DCDBAS is not set # CONFIG_ISCSI_IBFT_FIND is not set # CONFIG_SIGMA is not set CONFIG_GOOGLE_FIRMWARE=y # # Google Firmware Drivers # # # File systems # # CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_JBD_DEBUG=y CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y CONFIG_REISERFS_CHECK=y # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=y CONFIG_JFS_POSIX_ACL=y # CONFIG_JFS_SECURITY is not set CONFIG_JFS_DEBUG=y CONFIG_JFS_STATISTICS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y # CONFIG_FILE_LOCKING is not set CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y CONFIG_QUOTA=y # CONFIG_QUOTA_NETLINK_INTERFACE is not set # CONFIG_PRINT_QUOTA_WARNING is not set CONFIG_QUOTA_DEBUG=y CONFIG_QUOTA_TREE=y CONFIG_QFMT_V1=y CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=y CONFIG_NTFS_DEBUG=y CONFIG_NTFS_RW=y # # Pseudo filesystems # # CONFIG_PROC_FS is not set CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_TMPFS_XATTR is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y CONFIG_HFSPLUS_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 # CONFIG_JFFS2_FS_WRITEBUFFER is not set CONFIG_JFFS2_COMPRESSION_OPTIONS=y # CONFIG_JFFS2_ZLIB is not set CONFIG_JFFS2_LZO=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_JFFS2_CMODE_NONE is not set # CONFIG_JFFS2_CMODE_PRIORITY is not set # CONFIG_JFFS2_CMODE_SIZE is not set CONFIG_JFFS2_CMODE_FAVOURLZO=y # CONFIG_CRAMFS is not set CONFIG_SQUASHFS=y CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y # CONFIG_SQUASHFS_LZO is not set # CONFIG_SQUASHFS_XZ is not set # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 CONFIG_VXFS_FS=y CONFIG_MINIX_FS=y CONFIG_OMFS_FS=y CONFIG_HPFS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_PSTORE is not set CONFIG_SYSV_FS=y CONFIG_UFS_FS=y CONFIG_UFS_DEBUG=y CONFIG_ORE=y CONFIG_EXOFS_FS=y # CONFIG_EXOFS_DEBUG is not set # CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set CONFIG_OSF_PARTITION=y # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set # CONFIG_MSDOS_PARTITION is not set CONFIG_LDM_PARTITION=y CONFIG_LDM_DEBUG=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set CONFIG_NLS_CODEPAGE_855=y CONFIG_NLS_CODEPAGE_857=y # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set CONFIG_NLS_CODEPAGE_862=y CONFIG_NLS_CODEPAGE_863=y # CONFIG_NLS_CODEPAGE_864 is not set CONFIG_NLS_CODEPAGE_865=y CONFIG_NLS_CODEPAGE_866=y CONFIG_NLS_CODEPAGE_869=y CONFIG_NLS_CODEPAGE_936=y CONFIG_NLS_CODEPAGE_950=y CONFIG_NLS_CODEPAGE_932=y # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set CONFIG_NLS_CODEPAGE_1251=y CONFIG_NLS_ASCII=y # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set CONFIG_NLS_ISO8859_4=y CONFIG_NLS_ISO8859_5=y CONFIG_NLS_ISO8859_6=y CONFIG_NLS_ISO8859_7=y # CONFIG_NLS_ISO8859_9 is not set CONFIG_NLS_ISO8859_13=y CONFIG_NLS_ISO8859_14=y CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set CONFIG_NLS_KOI8_U=y CONFIG_NLS_UTF8=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 # CONFIG_ENABLE_WARN_DEPRECATED is not set CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_STRIP_ASM_SYMS is not set CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y # CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_LOCKUP_DETECTOR is not set # CONFIG_HARDLOCKUP_DETECTOR is not set CONFIG_DETECT_HUNG_TASK=y CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y # CONFIG_PROVE_RCU is not set # CONFIG_SPARSE_RCU_POINTER is not set CONFIG_LOCKDEP=y CONFIG_LOCK_STAT=y CONFIG_DEBUG_LOCKDEP=y CONFIG_TRACE_IRQFLAGS=y CONFIG_DEBUG_ATOMIC_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_VM=y # CONFIG_DEBUG_VIRTUAL is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set CONFIG_TEST_LIST_SORT=y CONFIG_DEBUG_SG=y CONFIG_DEBUG_NOTIFIERS=y # CONFIG_DEBUG_CREDENTIALS is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y # CONFIG_LKDTM is not set CONFIG_FAULT_INJECTION=y # CONFIG_FAIL_PAGE_ALLOC is not set # CONFIG_FAIL_MAKE_REQUEST is not set CONFIG_FAIL_IO_TIMEOUT=y CONFIG_FAULT_INJECTION_DEBUG_FS=y CONFIG_DEBUG_PAGEALLOC=y CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACER_MAX_TRACE=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_EVENT_POWER_TRACING_DEPRECATED=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y CONFIG_FUNCTION_TRACER=y CONFIG_FUNCTION_GRAPH_TRACER=y CONFIG_IRQSOFF_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_FTRACE_SYSCALLS is not set CONFIG_TRACE_BRANCH_PROFILING=y # CONFIG_BRANCH_PROFILE_NONE is not set # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set CONFIG_PROFILE_ALL_BRANCHES=y CONFIG_TRACING_BRANCHES=y CONFIG_BRANCH_TRACER=y CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_DYNAMIC_FTRACE is not set CONFIG_FUNCTION_PROFILER=y # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_MMIOTRACE is not set CONFIG_RING_BUFFER_BENCHMARK=y # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_BUILD_DOCSRC is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set CONFIG_ATOMIC64_SELFTEST=y CONFIG_ASYNC_RAID6_TEST=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_HAVE_ARCH_KMEMCHECK=y CONFIG_TEST_KSTRTOX=y # CONFIG_STRICT_DEVMEM is not set CONFIG_X86_VERBOSE_BOOTUP=y # CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y # CONFIG_DEBUG_RODATA_TEST is not set CONFIG_IOMMU_STRESS=y CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 # CONFIG_IO_DELAY_0X80 is not set CONFIG_IO_DELAY_0XED=y # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=1 # CONFIG_DEBUG_BOOT_PARAMS is not set # CONFIG_CPA_DEBUG is not set # CONFIG_OPTIMIZE_INLINING is not set # # Security options # CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set CONFIG_SECURITYFS=y CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y CONFIG_ASYNC_PQ=y CONFIG_ASYNC_RAID6_RECOV=y CONFIG_CRYPTO=y # # Crypto core or helper # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=y CONFIG_CRYPTO_AUTHENC=y # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_SEQIV=y # # Block modes # CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_CTS=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y # # Hash modes # CONFIG_CRYPTO_HMAC=y # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=y CONFIG_CRYPTO_GHASH=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_RMD128=y CONFIG_CRYPTO_RMD160=y # CONFIG_CRYPTO_RMD256 is not set CONFIG_CRYPTO_RMD320=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y # # Ciphers # CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_X86_64=y CONFIG_CRYPTO_AES_NI_INTEL=y # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_CAMELLIA=y CONFIG_CRYPTO_CAST5=y CONFIG_CRYPTO_CAST6=y CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_TEA=y # CONFIG_CRYPTO_TWOFISH is not set CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_TWOFISH_X86_64=y # # Compression # CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_ZLIB=y CONFIG_CRYPTO_LZO=y # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRYPTO_USER_API=y CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_USER_API_SKCIPHER=y # CONFIG_CRYPTO_HW is not set CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_EVENTFD=y CONFIG_KVM_APIC_ARCHITECTURE=y CONFIG_KVM_MMIO=y CONFIG_KVM_ASYNC_PF=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=y CONFIG_KVM_INTEL=y # CONFIG_KVM_AMD is not set # CONFIG_KVM_MMU_AUDIT is not set CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_RAID6_PQ=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y CONFIG_CRC8=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y # CONFIG_XZ_DEC is not set # CONFIG_XZ_DEC_BCJ is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_BCH=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y # CONFIG_AVERAGE is not set # CONFIG_CORDIC is not set
_______________________________________________ LKP mailing list LKP@xxxxxxxxxxxxxxx
_______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
