On Friday, July 25, 2014 2:05 AM, Ian Abbott wrote: > Use preferred style for copyright and driver description comments. > > Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx> > --- > drivers/staging/comedi/drivers/amplc_pc236.c | 92 ++++++++++++++-------------- > 1 file changed, 46 insertions(+), 46 deletions(-) > > diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c > index 243b0f4..9d64e45 100644 > --- a/drivers/staging/comedi/drivers/amplc_pc236.c > +++ b/drivers/staging/comedi/drivers/amplc_pc236.c > @@ -1,51 +1,51 @@ > /* > - comedi/drivers/amplc_pc236.c > - Driver for Amplicon PC36AT and PCI236 DIO boards. > - > - Copyright (C) 2002 MEV Ltd. <http://www.mev.co.uk/> > - > - COMEDI - Linux Control and Measurement Device Interface > - Copyright (C) 2000 David A. Schleef <ds@xxxxxxxxxxx> > - > - This program is free software; you can redistribute it and/or modify > - it under the terms of the GNU General Public License as published by > - the Free Software Foundation; either version 2 of the License, or > - (at your option) any later version. > - > - This program is distributed in the hope that it will be useful, > - but WITHOUT ANY WARRANTY; without even the implied warranty of > - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - GNU General Public License for more details. > -*/ > + * comedi/drivers/amplc_pc236.c > + * Driver for Amplicon PC36AT and PCI236 DIO boards. > + * > + * Copyright (C) 2002 MEV Ltd. <http://www.mev.co.uk/> > + * > + * COMEDI - Linux Control and Measurement Device Interface > + * Copyright (C) 2000 David A. Schleef <ds@xxxxxxxxxxx> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > /* > -Driver: amplc_pc236 > -Description: Amplicon PC36AT, PCI236 > -Author: Ian Abbott <abbotti@xxxxxxxxx> > -Devices: [Amplicon] PC36AT (pc36at), PCI236 (pci236 or amplc_pc236) > -Updated: Wed, 01 Apr 2009 15:41:25 +0100 > -Status: works > - > -Configuration options - PC36AT: > - [0] - I/O port base address > - [1] - IRQ (optional) > - > -Configuration options - PCI236: > - [0] - PCI bus of device (optional) > - [1] - PCI slot of device (optional) > - If bus/slot is not specified, the first available PCI device will be > - used. > - > -The PC36AT ISA board and PCI236 PCI board have a single 8255 appearing -as subdevice 0. > - > -Subdevice 1 pretends to be a digital input device, but it always returns > -0 when read. However, if you run a command with scan_begin_src=TRIG_EXT, -a rising edge on port C bit 3 acts as an external trigger, which can be -used to wake up tasks. This is like the comedi_parport device, but the -only way to physically disable the interrupt on the PC36AT is to remove -the IRQ jumper. If no interrupt is connected, then subdevice 1 is -unused. > -*/ Ian, This patch appears to be corrupted. > + * Driver: amplc_pc236 > + * Description: Amplicon PC36AT, PCI236 > + * Author: Ian Abbott <abbotti@xxxxxxxxx> > + * Devices: [Amplicon] PC36AT (pc36at), PCI236 (pci236 or amplc_pc236) > + * Updated: Wed, 01 Apr 2009 15:41:25 +0100 > + * Status: works > + * > + * Configuration options - PC36AT: > + * [0] - I/O port base address > + * [1] - IRQ (optional) > + * > + * Configuration options - PCI236: > + * [0] - PCI bus of device (optional) > + * [1] - PCI slot of device (optional) > + * If bus/slot is not specified, the first available PCI device will be > + * used. > + * > + * The PC36AT ISA board and PCI236 PCI board have a single 8255 > + appearing Patch corruption? > + * as subdevice 0. > + * > + * Subdevice 1 pretends to be a digital input device, but it always > + returns Again? > + * 0 when read. However, if you run a command with > + scan_begin_src=TRIG_EXT, Again? > + * a rising edge on port C bit 3 acts as an external trigger, which can > + be Again? > + * used to wake up tasks. This is like the comedi_parport device, but > + the Again? > + * only way to physically disable the interrupt on the PC36AT is to > + remove Again? > + * the IRQ jumper. If no interrupt is connected, then subdevice 1 is > + * unused. > + */ > > #include <linux/module.h> > #include <linux/pci.h> Not sure what happened.. Hartley _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
