Re: [PATCH v4 (staging-next) 2/5] staging:iio:hmc5843: Split hmc5843.c to multiple files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16/07/14 14:07, Josef Gajdusek wrote:
This patch splits hmc5843.c to multiple files - the interface-agnostic
hmc5843_core.c, i2c specific hmc5843_i2c.c and header file hmc5843.h. This is
another step to add support of SPI-enabled hmc5983.

Signed-off-by: Josef Gajdusek <atx@xxxxxxxx>
Unfortunately taking the tables non static just causes sparse to complain:

drivers/staging/iio/magnetometer/hmc5843.h:62:28: warning: symbol 'hmc5843_readable_table' was not declared. Should it be static?
drivers/staging/iio/magnetometer/hmc5843.h:71:28: warning: symbol 'hmc5843_writable_table' was not declared. Should it be static?
drivers/staging/iio/magnetometer/hmc5843.h:80:28: warning: symbol 'hmc5843_volatile_table' was not declared. Should it be static?
  CC [M]  drivers/staging/iio/magnetometer/hmc5843_core.o
  CHECK   drivers/staging/iio/magnetometer/hmc5843_i2c.c
drivers/staging/iio/magnetometer/hmc5843.h:62:28: warning: symbol 'hmc5843_readable_table' was not declared. Should it be static?
drivers/staging/iio/magnetometer/hmc5843.h:71:28: warning: symbol 'hmc5843_writable_table' was not declared. Should it be static?
drivers/staging/iio/magnetometer/hmc5843.h:80:28: warning: symbol 'hmc5843_volatile_table' was not declared. Should it be static?
  CC [M]  drivers/staging/iio/magnetometer/hmc5843_i2c.o

I think you'll probably just have to duplicate them (which is irritating, but there we are).

Jonathan
---
  drivers/staging/iio/magnetometer/Kconfig           |  14 +-
  drivers/staging/iio/magnetometer/Makefile          |   3 +-
  drivers/staging/iio/magnetometer/hmc5843.h         |  85 ++++++++++++
  .../iio/magnetometer/{hmc5843.c => hmc5843_core.c} | 154 +++++----------------
  drivers/staging/iio/magnetometer/hmc5843_i2c.c     |  75 ++++++++++
  5 files changed, 203 insertions(+), 128 deletions(-)
  create mode 100644 drivers/staging/iio/magnetometer/hmc5843.h
  rename drivers/staging/iio/magnetometer/{hmc5843.c => hmc5843_core.c} (79%)
  create mode 100644 drivers/staging/iio/magnetometer/hmc5843_i2c.c

diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig
index ad88d61..0a27f98 100644
--- a/drivers/staging/iio/magnetometer/Kconfig
+++ b/drivers/staging/iio/magnetometer/Kconfig
@@ -4,16 +4,22 @@
  menu "Magnetometer sensors"

  config SENSORS_HMC5843
-	tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer"
-	depends on I2C
+	tristate
  	select IIO_BUFFER
  	select IIO_TRIGGERED_BUFFER
+
+config SENSORS_HMC5843_I2C
+	tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)"
+	depends on I2C
+	select SENSORS_HMC5843
  	select REGMAP_I2C
  	help
  	  Say Y here to add support for the Honeywell HMC5843, HMC5883 and
  	  HMC5883L 3-Axis Magnetometer (digital compass).

-	  To compile this driver as a module, choose M here: the module
-	  will be called hmc5843.
+	  This driver can also be compiled as a set of modules.
+	  If so, these modules will be created:
+	  - hmc5843_core (core functions)
+	  - hmc5843_i2c (support for HMC5843, HMC5883 and HMC5883L)

  endmenu
diff --git a/drivers/staging/iio/magnetometer/Makefile b/drivers/staging/iio/magnetometer/Makefile
index f9bfb2e..65baf1c 100644
--- a/drivers/staging/iio/magnetometer/Makefile
+++ b/drivers/staging/iio/magnetometer/Makefile
@@ -2,4 +2,5 @@
  # Makefile for industrial I/O Magnetometer sensors
  #

-obj-$(CONFIG_SENSORS_HMC5843)	+= hmc5843.o
+obj-$(CONFIG_SENSORS_HMC5843)		+= hmc5843_core.o
+obj-$(CONFIG_SENSORS_HMC5843_I2C)	+= hmc5843_i2c.o
diff --git a/drivers/staging/iio/magnetometer/hmc5843.h b/drivers/staging/iio/magnetometer/hmc5843.h
new file mode 100644
index 0000000..0d9b02e
--- /dev/null
+++ b/drivers/staging/iio/magnetometer/hmc5843.h
@@ -0,0 +1,85 @@
+/*
+ * Header file for hmc5843 driver
+ *
+ * Split from hmc5843.c
+ * Copyright (C) Josef Gajdusek <atx@xxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * */
+
+
+#ifndef HMC5843_CORE_H
+#define HMC5843_CORE_H
+
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+
+#define HMC5843_CONFIG_REG_A			0x00
+#define HMC5843_CONFIG_REG_B			0x01
+#define HMC5843_MODE_REG			0x02
+#define HMC5843_DATA_OUT_MSB_REGS		0x03
+#define HMC5843_STATUS_REG			0x09
+#define HMC5843_ID_REG				0x0a
+#define HMC5843_ID_END				0x0c
+
+enum hmc5843_ids {
+	HMC5843_ID,
+	HMC5883_ID,
+	HMC5883L_ID,
+};
+
+struct hmc5843_data {
+	struct device *dev;
+	struct mutex lock;
+	struct regmap *regmap;
+	const struct hmc5843_chip_info *variant;
+	__be16 buffer[8]; /* 3x 16-bit channels + padding + 64-bit timestamp */
+};
+
+int hmc5843_common_probe(struct device *dev, struct regmap *regmap,
+		enum hmc5843_ids id);
+int hmc5843_common_remove(struct device *dev);
+
+int hmc5843_common_suspend(struct device *dev);
+int hmc5843_common_resume(struct device *dev);
+
+#ifdef CONFIG_PM_SLEEP
+static SIMPLE_DEV_PM_OPS(hmc5843_pm_ops,
+		hmc5843_common_suspend,
+		hmc5843_common_resume);
+#define HMC5843_PM_OPS (&hmc5843_pm_ops)
+#else
+#define HMC5843_PM_OPS NULL
+#endif
+
+static const struct regmap_range hmc5843_readable_ranges[] = {
+		regmap_reg_range(0, HMC5843_ID_END),
+};
+
+struct regmap_access_table hmc5843_readable_table = {
+		.yes_ranges = hmc5843_readable_ranges,
+		.n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges),
+};
+
+static const struct regmap_range hmc5843_writable_ranges[] = {
+		regmap_reg_range(0, HMC5843_MODE_REG),
+};
+
+struct regmap_access_table hmc5843_writable_table = {
+		.yes_ranges = hmc5843_writable_ranges,
+		.n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges),
+};
+
+static const struct regmap_range hmc5843_volatile_ranges[] = {
+		regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG),
+};
+
+struct regmap_access_table hmc5843_volatile_table = {
+		.yes_ranges = hmc5843_volatile_ranges,
+		.n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges),
+};
+
+#endif /* HMC5843_CORE_H */
diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843_core.c
similarity index 79%
rename from drivers/staging/iio/magnetometer/hmc5843.c
rename to drivers/staging/iio/magnetometer/hmc5843_core.c
index 6f06f98..bdeaf43 100644
--- a/drivers/staging/iio/magnetometer/hmc5843.c
+++ b/drivers/staging/iio/magnetometer/hmc5843_core.c
@@ -4,6 +4,8 @@

      Support for HMC5883 and HMC5883L by Peter Meerwald <pmeerw@xxxxxxxxxx>.

+    Split to multiple files by Josef Gajdusek <atx@xxxxxxxx> - 2014
+
      This program is free software; you can redistribute it and/or modify
      it under the terms of the GNU General Public License as published by
      the Free Software Foundation; either version 2 of the License, or
@@ -20,7 +22,6 @@
  */

  #include <linux/module.h>
-#include <linux/i2c.h>
  #include <linux/regmap.h>
  #include <linux/iio/iio.h>
  #include <linux/iio/sysfs.h>
@@ -29,19 +30,7 @@
  #include <linux/iio/triggered_buffer.h>
  #include <linux/delay.h>

-#define HMC5843_CONFIG_REG_A			0x00
-#define HMC5843_CONFIG_REG_B			0x01
-#define HMC5843_MODE_REG			0x02
-#define HMC5843_DATA_OUT_MSB_REGS		0x03
-#define HMC5843_STATUS_REG			0x09
-#define HMC5843_ID_REG				0x0a
-#define HMC5843_ID_END				0x0c
-
-enum hmc5843_ids {
-	HMC5843_ID,
-	HMC5883_ID,
-	HMC5883L_ID,
-};
+#include "hmc5843.h"

  /*
   * Range gain settings in (+-)Ga
@@ -121,15 +110,6 @@ struct hmc5843_chip_info {
  	const int *regval_to_nanoscale;
  };

-/* Each client has this additional data */
-struct hmc5843_data {
-	struct i2c_client *client;
-	struct mutex lock;
-	struct regmap *regmap;
-	const struct hmc5843_chip_info *variant;
-	__be16 buffer[8]; /* 3x 16-bit channels + padding + 64-bit timestamp */
-};
-
  /* The lower two bits contain the current conversion mode */
  static s32 hmc5843_set_mode(struct hmc5843_data *data, u8 operating_mode)
  {
@@ -159,7 +139,7 @@ static int hmc5843_wait_measurement(struct hmc5843_data *data)
  	}

  	if (tries < 0) {
-		dev_err(&data->client->dev, "data not ready\n");
+		dev_err(data->dev, "data not ready\n");
  		return -EIO;
  	}

@@ -524,7 +504,7 @@ static int hmc5843_init(struct hmc5843_data *data)
  	if (ret < 0)
  		return ret;
  	if (id[0] != 'H' || id[1] != '4' || id[2] != '3') {
-		dev_err(&data->client->dev, "no HMC5843/5883/5883L sensor\n");
+		dev_err(data->dev, "no HMC5843/5883/5883L sensor\n");
  		return -ENODEV;
  	}

@@ -550,66 +530,43 @@ static const struct iio_info hmc5843_info = {

  static const unsigned long hmc5843_scan_masks[] = {0x7, 0};

-static const struct regmap_range hmc5843_readable_ranges[] = {
-		regmap_reg_range(0, HMC5843_ID_END),
-};
-
-static struct regmap_access_table hmc5843_readable_table = {
-		.yes_ranges = hmc5843_readable_ranges,
-		.n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges),
-};

-static const struct regmap_range hmc5843_writable_ranges[] = {
-		regmap_reg_range(0, HMC5843_MODE_REG),
-};
-
-static struct regmap_access_table hmc5843_writable_table = {
-		.yes_ranges = hmc5843_writable_ranges,
-		.n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges),
-};
-
-static const struct regmap_range hmc5843_volatile_ranges[] = {
-		regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG),
-};
-
-static struct regmap_access_table hmc5843_volatile_table = {
-		.yes_ranges = hmc5843_volatile_ranges,
-		.n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges),
-};
-
-static struct regmap_config hmc5843_regmap_config = {
-		.reg_bits = 8,
-		.val_bits = 8,
-
-		.rd_table = &hmc5843_readable_table,
-		.wr_table = &hmc5843_writable_table,
-		.volatile_table = &hmc5843_volatile_table,
+int hmc5843_common_suspend(struct device *dev)
+{
+	return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)),
+			HMC5843_MODE_CONVERSION_CONTINUOUS);
+}
+EXPORT_SYMBOL(hmc5843_common_suspend);

-		.cache_type = REGCACHE_RBTREE,
-};
+int hmc5843_common_resume(struct device *dev)
+{
+	return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)),
+			HMC5843_MODE_SLEEP);
+}
+EXPORT_SYMBOL(hmc5843_common_resume);

-static int hmc5843_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+int hmc5843_common_probe(struct device *dev, struct regmap *regmap,
+		enum hmc5843_ids id)
  {
  	struct hmc5843_data *data;
  	struct iio_dev *indio_dev;
  	int ret;

-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
  	if (indio_dev == NULL)
  		return -ENOMEM;

+	dev_set_drvdata(dev, indio_dev);
+
  	/* default settings at probe */
  	data = iio_priv(indio_dev);
-	data->client = client;
-	data->variant = &hmc5843_chip_info_tbl[id->driver_data];
-	data->regmap = devm_regmap_init_i2c(client, &hmc5843_regmap_config);
+	data->dev = dev;
+	data->regmap = regmap;
+	data->variant = &hmc5843_chip_info_tbl[id];
  	mutex_init(&data->lock);

-	i2c_set_clientdata(client, indio_dev);
+	indio_dev->dev.parent = dev;
  	indio_dev->info = &hmc5843_info;
-	indio_dev->name = id->name;
-	indio_dev->dev.parent = &client->dev;
  	indio_dev->modes = INDIO_DIRECT_MODE;
  	indio_dev->channels = data->variant->channels;
  	indio_dev->num_channels = 4;
@@ -634,10 +591,11 @@ buffer_cleanup:
  	iio_triggered_buffer_cleanup(indio_dev);
  	return ret;
  }
+EXPORT_SYMBOL(hmc5843_common_probe);

-static int hmc5843_remove(struct i2c_client *client)
+int hmc5843_common_remove(struct device *dev)
  {
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);

  	iio_device_unregister(indio_dev);
  	iio_triggered_buffer_cleanup(indio_dev);
@@ -647,58 +605,8 @@ static int hmc5843_remove(struct i2c_client *client)

  	return 0;
  }
-
-#ifdef CONFIG_PM_SLEEP
-static int hmc5843_suspend(struct device *dev)
-{
-	struct hmc5843_data *data = iio_priv(i2c_get_clientdata(
-		to_i2c_client(dev)));
-
-	return hmc5843_set_mode(data, HMC5843_MODE_SLEEP);
-}
-
-static int hmc5843_resume(struct device *dev)
-{
-	struct hmc5843_data *data = iio_priv(i2c_get_clientdata(
-		to_i2c_client(dev)));
-
-	return hmc5843_set_mode(data, HMC5843_MODE_CONVERSION_CONTINUOUS);
-}
-
-static SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, hmc5843_suspend, hmc5843_resume);
-#define HMC5843_PM_OPS (&hmc5843_pm_ops)
-#else
-#define HMC5843_PM_OPS NULL
-#endif
-
-static const struct i2c_device_id hmc5843_id[] = {
-	{ "hmc5843", HMC5843_ID },
-	{ "hmc5883", HMC5883_ID },
-	{ "hmc5883l", HMC5883L_ID },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, hmc5843_id);
-
-static const struct of_device_id hmc5843_of_match[] = {
-	{ .compatible = "honeywell,hmc5843", .data = (void *)HMC5843_ID },
-	{ .compatible = "honeywell,hmc5883", .data = (void *)HMC5883_ID },
-	{ .compatible = "honeywell,hmc5883l", .data = (void *)HMC5883L_ID },
-	{}
-};
-MODULE_DEVICE_TABLE(of, hmc5843_of_match);
-
-static struct i2c_driver hmc5843_driver = {
-	.driver = {
-		.name	= "hmc5843",
-		.pm	= HMC5843_PM_OPS,
-		.of_match_table = hmc5843_of_match,
-	},
-	.id_table	= hmc5843_id,
-	.probe		= hmc5843_probe,
-	.remove		= hmc5843_remove,
-};
-module_i2c_driver(hmc5843_driver);
+EXPORT_SYMBOL(hmc5843_common_remove);

  MODULE_AUTHOR("Shubhrajyoti Datta <shubhrajyoti@xxxxxx>");
-MODULE_DESCRIPTION("HMC5843/5883/5883L driver");
+MODULE_DESCRIPTION("HMC5843/5883/5883L core driver");
  MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/magnetometer/hmc5843_i2c.c b/drivers/staging/iio/magnetometer/hmc5843_i2c.c
new file mode 100644
index 0000000..20b5c93
--- /dev/null
+++ b/drivers/staging/iio/magnetometer/hmc5843_i2c.c
@@ -0,0 +1,75 @@
+/*
+ * i2c driver for hmc5843/5843/5883/5883l
+ *
+ * Split from hmc5843.c
+ * Copyright (C) Josef Gajdusek <atx@xxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include "hmc5843.h"
+
+static struct regmap_config hmc5843_i2c_regmap_config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+
+		.rd_table = &hmc5843_readable_table,
+		.wr_table = &hmc5843_writable_table,
+		.volatile_table = &hmc5843_volatile_table,
+
+		.cache_type = REGCACHE_RBTREE,
+};
+
+static int hmc5843_i2c_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	return hmc5843_common_probe(&client->dev,
+			devm_regmap_init_i2c(client, &hmc5843_i2c_regmap_config),
+			id->driver_data);
+}
+
+static int hmc5843_i2c_remove(struct i2c_client *client)
+{
+	return hmc5843_common_remove(&client->dev);
+}
+
+static const struct i2c_device_id hmc5843_id[] = {
+	{ "hmc5843", HMC5843_ID },
+	{ "hmc5883", HMC5883_ID },
+	{ "hmc5883l", HMC5883L_ID },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, hmc5843_id);
+
+static const struct of_device_id hmc5843_of_match[] = {
+	{ .compatible = "honeywell,hmc5843", .data = (void *)HMC5843_ID },
+	{ .compatible = "honeywell,hmc5883", .data = (void *)HMC5883_ID },
+	{ .compatible = "honeywell,hmc5883l", .data = (void *)HMC5883L_ID },
+	{}
+};
+MODULE_DEVICE_TABLE(of, hmc5843_of_match);
+
+static struct i2c_driver hmc5843_driver = {
+	.driver = {
+		.name	= "hmc5843",
+		.pm	= HMC5843_PM_OPS,
+		.of_match_table = hmc5843_of_match,
+	},
+	.id_table	= hmc5843_id,
+	.probe		= hmc5843_i2c_probe,
+	.remove		= hmc5843_i2c_remove,
+};
+module_i2c_driver(hmc5843_driver);
+
+MODULE_AUTHOR("Josef Gajdusek <atx@xxxxxxxx>");
+MODULE_DESCRIPTION("HMC5843/5883/5883L i2c driver");
+MODULE_LICENSE("GPL");


_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux