Clean redundant comments in the code.
Since I perform single fix type per patch, I've ignored the 80 line warning
when checking the patch against checkpatch.
I will fix the 80 line warnings on further patches.
Signed-off-by: Igor Bezukh <igbzkh@xxxxxxxxx>
---
drivers/staging/vt6655/wcmd.c | 46 ++++++++++++-----------------------------
1 file changed, 13 insertions(+), 33 deletions(-)
diff --git a/drivers/staging/vt6655/wcmd.c b/drivers/staging/vt6655/wcmd.c
index a689645..2456b30 100644
--- a/drivers/staging/vt6655/wcmd.c
+++ b/drivers/staging/vt6655/wcmd.c
@@ -54,13 +54,7 @@
#include "iowpa.h"
#include "channel.h"
-/*--------------------- Static Definitions -------------------------*/
-
-/*--------------------- Static Classes ----------------------------*/
-
-/*--------------------- Static Variables --------------------------*/
static int msglevel = MSG_LEVEL_INFO;
-/*--------------------- Static Functions --------------------------*/
static
void
@@ -85,10 +79,6 @@ s_bCommandComplete(
PSDevice pDevice
);
-/*--------------------- Export Variables --------------------------*/
-
-/*--------------------- Export Functions --------------------------*/
-
/*
* Description:
* Stop AdHoc beacon during scan process
@@ -134,7 +124,7 @@ vAdHocBeaconStop(PSDevice pDevice)
if (bStop)
MACvRegBitsOff(pDevice->PortOffset, MAC_REG_TCR, TCR_AUTOBCNTX);
-} /* vAdHocBeaconStop */
+}
/*
* Description:
@@ -167,7 +157,7 @@ vAdHocBeaconRestart(PSDevice pDevice)
}
}
-/*+
+/*
*
* Routine Description:
* Prepare and send probe request management frames.
@@ -176,7 +166,7 @@ vAdHocBeaconRestart(PSDevice pDevice)
* Return Value:
* none.
*
- -*/
+ */
static
void
@@ -223,7 +213,7 @@ s_vProbeChannel(
}
}
-/*+
+/*
*
* Routine Description:
* Constructs an probe request frame
@@ -232,7 +222,7 @@ s_vProbeChannel(
* Return Value:
* A ptr to Tx frame or NULL on allocation failure
*
- -*/
+ */
PSTxMgmtPacket
s_MgrMakeProbeRequest(
@@ -292,7 +282,6 @@ vCommandTimerWait(
init_timer(&pDevice->sTimerCommand);
pDevice->sTimerCommand.data = (unsigned long) pDevice;
pDevice->sTimerCommand.function = (TimerFunction)vCommandTimer;
- // RUN_AT :1 msec ~= (HZ/1024)
pDevice->sTimerCommand.expires = (unsigned int)RUN_AT((MSecond * HZ) >> 10);
add_timer(&pDevice->sTimerCommand);
return;
@@ -366,9 +355,8 @@ vCommandTimer(
s_bCommandComplete(pDevice);
} else {
-//2008-8-4 <add> by chester
if (!is_channel_valid(pMgmt->uScanChannel)) {
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Invalid channel pMgmt->uScanChannel = %d \n", pMgmt->uScanChannel);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Invalid channel pMgmt->uScanChannel = %d\n", pMgmt->uScanChannel);
s_bCommandComplete(pDevice);
spin_unlock_irq(&pDevice->lock);
return;
@@ -394,7 +382,6 @@ vCommandTimer(
CARDbSetBSSID(pMgmt->pAdapter, pMgmt->abyCurrBSSID, OP_MODE_UNKNOWN);
pMgmt->uScanChannel++;
-//2008-8-4 <modify> by chester
if (!is_channel_valid(pMgmt->uScanChannel) &&
pMgmt->uScanChannel <= pDevice->byMaxChannel) {
pMgmt->uScanChannel = pDevice->byMaxChannel + 1;
@@ -431,7 +418,6 @@ vCommandTimer(
pMgmt->eScanState = WMAC_NO_SCANNING;
vAdHocBeaconRestart(pDevice);
-//2008-0409-07, <Add> by Einsn Liu
#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
if (pMgmt->eScanType == WMAC_SCAN_PASSIVE)
{//send scan event to wpa_Supplicant
@@ -471,7 +457,6 @@ vCommandTimer(
return;
}
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " CARDbRadioPowerOff\n");
- //2008-09-02 <mark> by chester
s_bCommandComplete(pDevice);
break;
@@ -482,7 +467,6 @@ vCommandTimer(
spin_unlock_irq(&pDevice->lock);
return;
}
-//2008-09-02 <mark> by chester
s_bCommandComplete(pDevice);
break;
@@ -615,7 +599,7 @@ vCommandTimer(
else if (pMgmt->eCurrState < WMAC_STATE_AUTHPENDING) {
printk("WLAN_AUTHENTICATE_WAIT:Authen Fail???\n");
- } else if (pDevice->byLinkWaitCount <= 4) { //mike add:wait another 2 sec if authenticated_frame delay!
+ } else if (pDevice->byLinkWaitCount <= 4) {
pDevice->byLinkWaitCount++;
printk("WLAN_AUTHENTICATE_WAIT:wait %d times!!\n", pDevice->byLinkWaitCount);
spin_unlock_irq(&pDevice->lock);
@@ -652,7 +636,7 @@ vCommandTimer(
init_timer(&pDevice->sTimerTxData);
pDevice->sTimerTxData.data = (unsigned long) pDevice;
pDevice->sTimerTxData.function = (TimerFunction)BSSvSecondTxData;
- pDevice->sTimerTxData.expires = RUN_AT(10*HZ); //10s callback
+ pDevice->sTimerTxData.expires = RUN_AT(10*HZ);
pDevice->fTxDataInSleep = false;
pDevice->nTxDataTimeCout = 0;
}
@@ -662,7 +646,7 @@ vCommandTimer(
#endif
} else if (pMgmt->eCurrState < WMAC_STATE_ASSOCPENDING) {
printk("WLAN_ASSOCIATE_WAIT:Association Fail???\n");
- } else if (pDevice->byLinkWaitCount <= 4) { //mike add:wait another 2 sec if associated_frame delay!
+ } else if (pDevice->byLinkWaitCount <= 4) {
pDevice->byLinkWaitCount++;
printk("WLAN_ASSOCIATE_WAIT:wait %d times!!\n", pDevice->byLinkWaitCount);
spin_unlock_irq(&pDevice->lock);
@@ -794,7 +778,7 @@ vCommandTimer(
s_bCommandComplete(pDevice);
break;
- } //switch
+ }
spin_unlock_irq(&pDevice->lock);
return;
}
@@ -812,7 +796,6 @@ s_bCommandComplete(
pDevice->eCommandState = WLAN_CMD_IDLE;
if (pDevice->cbFreeCmdQueue == CMD_Q_SIZE) {
- //Command Queue Empty
pDevice->bCmdRunning = false;
return true;
} else {
@@ -961,7 +944,6 @@ bool bClearBSSID_SCAN(
return true;
}
-//mike add:reset command timer
void
vResetCommandTimer(
void *hDeviceContext
@@ -969,9 +951,7 @@ vResetCommandTimer(
{
PSDevice pDevice = (PSDevice)hDeviceContext;
- //delete timer
del_timer(&pDevice->sTimerCommand);
- //init timer
init_timer(&pDevice->sTimerCommand);
pDevice->sTimerCommand.data = (unsigned long) pDevice;
pDevice->sTimerCommand.function = (TimerFunction)vCommandTimer;
@@ -996,7 +976,7 @@ BSSvSecondTxData(
if (pDevice->nTxDataTimeCout < 4) //don't tx data if timer less than 40s
{
- pDevice->sTimerTxData.expires = RUN_AT(10*HZ); //10s callback
+ pDevice->sTimerTxData.expires = RUN_AT(10*HZ);
add_timer(&pDevice->sTimerTxData);
return;
}
@@ -1009,12 +989,12 @@ BSSvSecondTxData(
if (pDevice->bLinkPass == true) {
#endif
pDevice->fTxDataInSleep = true;
- PSbSendNullPacket(pDevice); //send null packet
+ PSbSendNullPacket(pDevice);
pDevice->fTxDataInSleep = false;
}
spin_unlock_irq(&pDevice->lock);
- pDevice->sTimerTxData.expires = RUN_AT(10*HZ); //10s callback
+ pDevice->sTimerTxData.expires = RUN_AT(10*HZ);
add_timer(&pDevice->sTimerTxData);
return;
}
--
1.7.9.5
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
