The comedi_error() function is just a wrapper around dev_err() that adds the dev->driver->driver_name prefix to the message and a terminating new-line character. The addition of the driver_name is just added noise and some of the users of comedi_error() add unnecessary additional new-line characters. Use dev_err() directly instead of comedi_error() to avoid any confusion and so that all the comedi generated kernel messages have the same format. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregk@xxxxxxxxxxxxxxxxxxx> --- .../comedi/drivers/addi-data/hwdrv_apci3120.c | 27 +++++++++++----------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c index bfa154d..6e61226 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c @@ -318,7 +318,8 @@ static int apci3120_setup_chan_list(struct comedi_device *dev, /* correct channel and range number check itself comedi/range.c */ if (n_chan < 1) { if (!check) - comedi_error(dev, "range/channel list is empty!"); + dev_err(dev->class_dev, + "range/channel list is empty!\n"); return 0; } /* All is ok, so we can setup channel/range list */ @@ -1373,10 +1374,10 @@ static void apci3120_interrupt_dma(int irq, void *d) if (samplesinbuf < devpriv->ui_DmaBufferUsesize[devpriv->ui_DmaActualBuffer]) { - comedi_error(dev, "Interrupted DMA transfer!"); + dev_err(dev->class_dev, "Interrupted DMA transfer!\n"); } if (samplesinbuf & 1) { - comedi_error(dev, "Odd count of bytes in DMA ring!"); + dev_err(dev->class_dev, "Odd count of bytes in DMA ring!\n"); apci3120_cancel(dev, s); return; } @@ -1548,7 +1549,7 @@ static void apci3120_interrupt(int irq, void *d) int_amcc = inl(devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR); /* get AMCC int register */ if ((!int_daq) && (!(int_amcc & ANY_S593X_INT))) { - comedi_error(dev, "IRQ from unknown source"); + dev_err(dev->class_dev, "IRQ from unknown source\n"); return; } @@ -1565,9 +1566,9 @@ static void apci3120_interrupt(int irq, void *d) inb(devpriv->i_IobaseAmcc + APCI3120_TIMER_STATUS_REGISTER); if (int_amcc & MASTER_ABORT_INT) - comedi_error(dev, "AMCC IRQ - MASTER DMA ABORT!"); + dev_err(dev->class_dev, "AMCC IRQ - MASTER DMA ABORT!\n"); if (int_amcc & TARGET_ABORT_INT) - comedi_error(dev, "AMCC IRQ - TARGET DMA ABORT!"); + dev_err(dev->class_dev, "AMCC IRQ - TARGET DMA ABORT!\n"); /* Ckeck if EOC interrupt */ if (((int_daq & 0x8) == 0) @@ -1740,7 +1741,7 @@ static int apci3120_config_insn_timer(struct comedi_device *dev, unsigned char b_Tmp; if (!data[1]) - comedi_error(dev, "config:No timer constant !"); + dev_err(dev->class_dev, "No timer constant!\n"); devpriv->b_Timer2Interrupt = (unsigned char) data[2]; /* save info whether to enable or disable interrupt */ @@ -1886,14 +1887,14 @@ static int apci3120_write_insn_timer(struct comedi_device *dev, if ((devpriv->b_Timer2Mode != APCI3120_WATCHDOG) && (devpriv->b_Timer2Mode != APCI3120_TIMER)) { - comedi_error(dev, "\nwrite:timer2 not configured "); + dev_err(dev->class_dev, "timer2 not configured\n"); return -EINVAL; } if (data[0] == 2) { /* write new value */ if (devpriv->b_Timer2Mode != APCI3120_TIMER) { - comedi_error(dev, - "write :timer2 not configured in TIMER MODE"); + dev_err(dev->class_dev, + "timer2 not configured in TIMER MODE\n"); return -EINVAL; } @@ -1991,8 +1992,8 @@ static int apci3120_write_insn_timer(struct comedi_device *dev, case 2: /* write new value to Timer */ if (devpriv->b_Timer2Mode != APCI3120_TIMER) { - comedi_error(dev, - "write :timer2 not configured in TIMER MODE"); + dev_err(dev->class_dev, + "timer2 not configured in TIMER MODE\n"); return -EINVAL; } /* ui_Timervalue2=data[1]; // passed as argument */ @@ -2056,7 +2057,7 @@ static int apci3120_read_insn_timer(struct comedi_device *dev, if ((devpriv->b_Timer2Mode != APCI3120_WATCHDOG) && (devpriv->b_Timer2Mode != APCI3120_TIMER)) { - comedi_error(dev, "\nread:timer2 not configured "); + dev_err(dev->class_dev, "timer2 not configured\n"); } /* this_board->timer_read(dev,data); */ -- 1.9.3 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel