Fix the checkpatch.pl warnings:
WARNING: Missing a blank line after declarations
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregk@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/ni_mio_common.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index b630c66..af5ee50 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -1115,6 +1115,7 @@ static int ni_ao_wait_for_dma_load(struct comedi_device *dev)
{
static const int timeout = 10000;
int i;
+
for (i = 0; i < timeout; i++) {
unsigned short b_status;
@@ -1810,6 +1811,7 @@ static int ni_ai_reset(struct comedi_device *dev, struct comedi_subdevice *s)
AI_Output_Control_Register);
} else {
unsigned ai_output_control_bits;
+
ni_stc_writew(dev,
AI_SHIFTIN_Pulse_Width |
AI_SOC_Polarity |
@@ -1904,6 +1906,7 @@ static void ni_m_series_load_channelgain_list(struct comedi_device *dev,
if ((list[0] & CR_ALT_SOURCE)) {
unsigned bypass_bits;
+
chan = CR_CHAN(list[0]);
range = CR_RANGE(list[0]);
range_code = ni_gainlkup[board->gainlkup][range];
@@ -1927,6 +1930,7 @@ static void ni_m_series_load_channelgain_list(struct comedi_device *dev,
}
for (i = 0; i < n_chan; i++) {
unsigned config_bits = 0;
+
chan = CR_CHAN(list[i]);
aref = CR_AREF(list[i]);
range = CR_RANGE(list[i]);
@@ -2703,6 +2707,7 @@ static int ni_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
#ifdef PCIDMA
{
int retval = ni_ai_setup_MITE_dma(dev);
+
if (retval)
return retval;
}
@@ -2825,6 +2830,7 @@ static int ni_m_series_ao_config_chanlist(struct comedi_device *dev,
}
for (i = 0; i < n_chans; i++) {
const struct comedi_krange *krange;
+
chan = CR_CHAN(chanspec[i]);
range = CR_RANGE(chanspec[i]);
krange = s->range_table->range + range;
@@ -3249,6 +3255,7 @@ static int ni_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
AO_Output_Control_Register);
} else {
unsigned bits;
+
devpriv->ao_mode1 &= ~AO_Multiple_Channels;
bits = AO_UPDATE_Output_Select(AO_Update_Output_High_Z);
if (devpriv->is_m_series || devpriv->is_6xxx) {
@@ -3426,6 +3433,7 @@ static int ni_ao_reset(struct comedi_device *dev, struct comedi_subdevice *s)
if (devpriv->is_6xxx) {
unsigned immediate_bits = 0;
unsigned i;
+
for (i = 0; i < s->n_chan; ++i)
immediate_bits |= 1 << i;
ni_ao_win_outw(dev, immediate_bits, AO_Immediate_671x);
@@ -3928,6 +3936,7 @@ static void init_ao_67xx(struct comedi_device *dev, struct comedi_subdevice *s)
static unsigned ni_gpct_to_stc_register(enum ni_gpct_register reg)
{
unsigned stc_register;
+
switch (reg) {
case NITIO_G0_AUTO_INC:
stc_register = G_Autoincrement_Register(0);
@@ -4882,6 +4891,7 @@ static int ni_mseries_get_pll_parameters(unsigned reference_period_ns,
static const unsigned target_picosec = 12500;
static const unsigned fudge_factor_80_to_20Mhz = 4;
int best_period_picosec = 0;
+
for (div = 1; div <= max_div; ++div) {
for (mult = 1; mult <= max_mult; ++mult) {
unsigned new_period_ps =
@@ -4961,6 +4971,7 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device *dev,
{
unsigned rtsi_channel;
static const unsigned max_rtsi_channel = 7;
+
for (rtsi_channel = 0; rtsi_channel <= max_rtsi_channel;
++rtsi_channel) {
if (source ==
@@ -5758,6 +5769,7 @@ static int ni_E_init(struct comedi_device *dev,
ni_writeb(dev, 0, Magic_611x);
} else if (devpriv->is_m_series) {
int channel;
+
for (channel = 0; channel < board->n_aochan; ++channel) {
ni_writeb(dev, 0xf,
M_Offset_AO_Waveform_Order(channel));
--
1.9.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
