The driver hasn't been cleaned up and nobody is working to do so, so remove it. Signed-off-by: Kristina Martšenko <kristina.martsenko@xxxxxxxxx> Cc: Pavel Machek <pavel@xxxxxx> --- v2: Rebased on top of staging-next, no other changes. MAINTAINERS | 5 - drivers/staging/Kconfig | 2 - drivers/staging/Makefile | 1 - drivers/staging/winbond/Kconfig | 11 - drivers/staging/winbond/Makefile | 15 - drivers/staging/winbond/TODO | 12 - drivers/staging/winbond/core.h | 61 - drivers/staging/winbond/localpara.h | 311 ---- drivers/staging/winbond/mac_structures.h | 71 - drivers/staging/winbond/mds.c | 650 -------- drivers/staging/winbond/mds_f.h | 22 - drivers/staging/winbond/mds_s.h | 130 -- drivers/staging/winbond/mto.c | 167 --- drivers/staging/winbond/mto.h | 134 -- drivers/staging/winbond/phy_calibration.c | 1317 ---------------- drivers/staging/winbond/phy_calibration.h | 85 -- drivers/staging/winbond/reg.c | 2328 ----------------------------- drivers/staging/winbond/sme_api.h | 191 --- drivers/staging/winbond/wb35reg.c | 806 ---------- drivers/staging/winbond/wb35reg_f.h | 65 - drivers/staging/winbond/wb35reg_s.h | 240 --- drivers/staging/winbond/wb35rx.c | 358 ----- drivers/staging/winbond/wb35rx_f.h | 15 - drivers/staging/winbond/wb35rx_s.h | 44 - drivers/staging/winbond/wb35tx.c | 290 ---- drivers/staging/winbond/wb35tx_f.h | 22 - drivers/staging/winbond/wb35tx_s.h | 39 - drivers/staging/winbond/wbhal.h | 513 ------- drivers/staging/winbond/wbusb.c | 853 ----------- 29 files changed, 8758 deletions(-) delete mode 100644 drivers/staging/winbond/Kconfig delete mode 100644 drivers/staging/winbond/Makefile delete mode 100644 drivers/staging/winbond/TODO delete mode 100644 drivers/staging/winbond/core.h delete mode 100644 drivers/staging/winbond/localpara.h delete mode 100644 drivers/staging/winbond/mac_structures.h delete mode 100644 drivers/staging/winbond/mds.c delete mode 100644 drivers/staging/winbond/mds_f.h delete mode 100644 drivers/staging/winbond/mds_s.h delete mode 100644 drivers/staging/winbond/mto.c delete mode 100644 drivers/staging/winbond/mto.h delete mode 100644 drivers/staging/winbond/phy_calibration.c delete mode 100644 drivers/staging/winbond/phy_calibration.h delete mode 100644 drivers/staging/winbond/reg.c delete mode 100644 drivers/staging/winbond/sme_api.h delete mode 100644 drivers/staging/winbond/wb35reg.c delete mode 100644 drivers/staging/winbond/wb35reg_f.h delete mode 100644 drivers/staging/winbond/wb35reg_s.h delete mode 100644 drivers/staging/winbond/wb35rx.c delete mode 100644 drivers/staging/winbond/wb35rx_f.h delete mode 100644 drivers/staging/winbond/wb35rx_s.h delete mode 100644 drivers/staging/winbond/wb35tx.c delete mode 100644 drivers/staging/winbond/wb35tx_f.h delete mode 100644 drivers/staging/winbond/wb35tx_s.h delete mode 100644 drivers/staging/winbond/wbhal.h delete mode 100644 drivers/staging/winbond/wbusb.c diff --git a/MAINTAINERS b/MAINTAINERS index 1a3564d..4c7cff4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8631,11 +8631,6 @@ M: Forest Bond <forest@xxxxxxxxxxxxxxxxxxx> S: Odd Fixes F: drivers/staging/vt665?/ -STAGING - WINBOND IS89C35 WLAN USB DRIVER -M: Pavel Machek <pavel@xxxxxx> -S: Odd Fixes -F: drivers/staging/winbond/ - STAGING - XGI Z7,Z9,Z11 PCI DISPLAY DRIVER M: Arnaud Patard <arnaud.patard@xxxxxxxxxxx> S: Odd Fixes diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 52d7e8b..c7e34a2 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -30,8 +30,6 @@ source "drivers/staging/slicoss/Kconfig" source "drivers/staging/usbip/Kconfig" -source "drivers/staging/winbond/Kconfig" - source "drivers/staging/wlan-ng/Kconfig" source "drivers/staging/comedi/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 1b9e10c..8ad1689 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -7,7 +7,6 @@ obj-y += media/ obj-$(CONFIG_ET131X) += et131x/ obj-$(CONFIG_SLICOSS) += slicoss/ obj-$(CONFIG_USBIP_CORE) += usbip/ -obj-$(CONFIG_W35UND) += winbond/ obj-$(CONFIG_PRISM2_USB) += wlan-ng/ obj-$(CONFIG_COMEDI) += comedi/ obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon/ diff --git a/drivers/staging/winbond/Kconfig b/drivers/staging/winbond/Kconfig deleted file mode 100644 index db5b053..0000000 --- a/drivers/staging/winbond/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -config W35UND - tristate "IS89C35 WLAN USB driver" - depends on MAC80211 && WLAN && USB - default n - ---help--- - This is highly experimental driver for Winbond WIFI card. - - Hardware is present in some Kohjinsha subnotebooks, and in some - stand-alone USB modules. Chipset name seems to be w89c35d. - - Check <http://code.google.com/p/winbondport/> for new version. diff --git a/drivers/staging/winbond/Makefile b/drivers/staging/winbond/Makefile deleted file mode 100644 index 081d48d..0000000 --- a/drivers/staging/winbond/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -w35und-y := \ - mds.o \ - mto.o \ - phy_calibration.o \ - reg.o \ - wb35reg.o \ - wb35rx.o \ - wb35tx.o \ - wbusb.o \ - - -obj-$(CONFIG_W35UND) += w35und.o - - - diff --git a/drivers/staging/winbond/TODO b/drivers/staging/winbond/TODO deleted file mode 100644 index b4c592a..0000000 --- a/drivers/staging/winbond/TODO +++ /dev/null @@ -1,12 +0,0 @@ -TODO: - - sparse cleanups - - checkpatch cleanups - - kerneldoc cleanups - - fix severeCamelCaseInfestation - - remove unused ioctls - - use cfg80211 for regulatory stuff - - fix 4k stack problems - - fix locking problems (it's done using atomics...) - -Please send patches to Greg Kroah-Hartman <greg@xxxxxxxxx> and -Pavel Machek <pavel@xxxxxx> diff --git a/drivers/staging/winbond/core.h b/drivers/staging/winbond/core.h deleted file mode 100644 index fc0ef24..0000000 --- a/drivers/staging/winbond/core.h +++ /dev/null @@ -1,61 +0,0 @@ -#ifndef __WINBOND_CORE_H -#define __WINBOND_CORE_H - -#include <linux/wireless.h> -#include <linux/types.h> -#include <linux/delay.h> - -#include "wbhal.h" -#include "mto.h" - -#include "mac_structures.h" -#include "mds_s.h" - -#define MAX_NUM_TX_MMPDU 2 -#define MAX_MMPDU_SIZE 1512 -#define MAX_NUM_RX_MMPDU 6 - -struct mlme_frame { - s8 *pMMPDU; - u16 len; - u8 data_type; - u8 is_in_used; - - u8 TxMMPDU[MAX_NUM_TX_MMPDU][MAX_MMPDU_SIZE]; - u8 TxMMPDUInUse[(MAX_NUM_TX_MMPDU + 3) & ~0x03]; - - u16 wNumTxMMPDU; - u16 wNumTxMMPDUDiscarded; - - u8 RxMMPDU[MAX_NUM_RX_MMPDU][MAX_MMPDU_SIZE]; - u8 SaveRxBufSlotInUse[(MAX_NUM_RX_MMPDU + 3) & ~0x03]; - - u16 wNumRxMMPDU; - u16 wNumRxMMPDUDiscarded; - - u16 wNumRxMMPDUInMLME; /* Number of the Rx MMPDU */ - u16 reserved_1; /* in MLME. */ - /* excluding the discarded */ -}; - -#define WBLINUX_PACKET_ARRAY_SIZE (ETHERNET_TX_DESCRIPTORS*4) - -#define WB_MAX_LINK_NAME_LEN 40 - -struct wbsoft_priv { - struct wb_local_para sLocalPara; /* Myself connected - parameters */ - - struct mlme_frame sMlmeFrame; /* connect to peerSTA parameters */ - - struct wb35_mto_params sMtoPara; /* MTO_struct ... */ - struct hw_data sHwData; /*For HAL */ - struct wb35_mds Mds; - - u32 RxByteCount; - u32 TxByteCount; - - bool enabled; -}; - -#endif /* __WINBOND_CORE_H */ diff --git a/drivers/staging/winbond/localpara.h b/drivers/staging/winbond/localpara.h deleted file mode 100644 index 8ca80dd..0000000 --- a/drivers/staging/winbond/localpara.h +++ /dev/null @@ -1,311 +0,0 @@ -#ifndef __WINBOND_LOCALPARA_H -#define __WINBOND_LOCALPARA_H - -/* - * ============================================================= - * LocalPara.h - - * ============================================================= - */ - -#include "mac_structures.h" - -/* Define the local ability */ - -#define LOCAL_DEFAULT_BEACON_PERIOD 100 /* ms */ -#define LOCAL_DEFAULT_ATIM_WINDOW 0 -#define LOCAL_DEFAULT_ERP_CAPABILITY 0x0431 /* - * 0x0001: ESS - * 0x0010: Privacy - * 0x0020: short preamble - * 0x0400: short slot time - */ -#define LOCAL_DEFAULT_LISTEN_INTERVAL 5 - -#define LOCAL_DEFAULT_24_CHANNEL_NUM 13 /* channel 1..13 */ -#define LOCAL_DEFAULT_5_CHANNEL_NUM 8 /* channel 36..64 */ - -#define LOCAL_USA_24_CHANNEL_NUM 11 -#define LOCAL_USA_5_CHANNEL_NUM 12 -#define LOCAL_EUROPE_24_CHANNEL_NUM 13 -#define LOCAL_EUROPE_5_CHANNEL_NUM 19 -#define LOCAL_JAPAN_24_CHANNEL_NUM 14 -#define LOCAL_JAPAN_5_CHANNEL_NUM 11 -#define LOCAL_UNKNOWN_24_CHANNEL_NUM 14 -#define LOCAL_UNKNOWN_5_CHANNEL_NUM 34 /* not include 165 */ - -#define psLOCAL (&(adapter->sLocalPara)) - -#define MODE_802_11_BG 0 -#define MODE_802_11_A 1 -#define MODE_802_11_ABG 2 -#define MODE_802_11_BG_IBSS 3 -#define MODE_802_11_B 4 -#define MODE_AUTO 255 - -#define BAND_TYPE_DSSS 0 -#define BAND_TYPE_OFDM_24 1 -#define BAND_TYPE_OFDM_5 2 - -/* refer Bitmap2RateValue table */ - -/* the bitmap value of all the H/W supported rates: */ -/* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */ -#define LOCAL_ALL_SUPPORTED_RATES_BITMAP 0x130c1a66 -/* the bitmap value of all the H/W supported rates except to non-OFDM rates: */ -/* 6, 9, 12, 18, 24, 36, 48, 54 */ -#define LOCAL_OFDM_SUPPORTED_RATES_BITMAP 0x130c1240 -#define LOCAL_11B_SUPPORTED_RATE_BITMAP 0x826 -#define LOCAL_11B_BASIC_RATE_BITMAP 0x826 -#define LOCAL_11B_OPERATION_RATE_BITMAP 0x826 -#define LOCAL_11G_BASIC_RATE_BITMAP 0x826 /* 1, 2, 5.5, 11 */ -#define LOCAL_11G_OPERATION_RATE_BITMAP 0x130c1240 /* 6, 9, 12, 18, - * 24, 36, 48, 54 - */ -#define LOCAL_11A_BASIC_RATE_BITMAP 0x01001040 /* 6, 12, 24 */ -#define LOCAL_11A_OPERATION_RATE_BITMAP 0x120c0200 /* 9, 18, 36, - * 48, 54 - */ - - -#define PWR_ACTIVE 0 -#define PWR_SAVE 1 -#define PWR_TX_IDLE_CYCLE 6 - -/* bPreambleMode and bSlotTimeMode */ -#define AUTO_MODE 0 -#define LONG_MODE 1 - -/* Region definition */ -#define REGION_AUTO 0xff -#define REGION_UNKNOWN 0 -#define REGION_EUROPE 1 /* ETSI */ -#define REGION_JAPAN 2 /* MKK */ -#define REGION_USA 3 /* FCC */ -#define REGION_FRANCE 4 /* FRANCE */ -#define REGION_SPAIN 5 /* SPAIN */ -#define REGION_ISRAEL 6 /* ISRAEL */ - -#define MAX_BSS_DESCRIPT_ELEMENT 32 -#define MAX_PMKID_CandidateList 16 - -/* - * High byte : Event number, low byte : reason - * Event definition - * -- SME/MLME event - */ -#define EVENT_RCV_DEAUTH 0x0100 -#define EVENT_JOIN_FAIL 0x0200 -#define EVENT_AUTH_FAIL 0x0300 -#define EVENT_ASSOC_FAIL 0x0400 -#define EVENT_LOST_SIGNAL 0x0500 -#define EVENT_BSS_DESCRIPT_LACK 0x0600 -#define EVENT_COUNTERMEASURE 0x0700 -#define EVENT_JOIN_FILTER 0x0800 -/* -- TX/RX event */ -#define EVENT_RX_BUFF_UNAVAILABLE 0x4100 - -#define EVENT_CONNECT 0x8100 -#define EVENT_DISCONNECT 0x8200 -#define EVENT_SCAN_REQ 0x8300 - -/* Reason of Event */ -#define EVENT_REASON_FILTER_BASIC_RATE 0x0001 -#define EVENT_REASON_FILTER_PRIVACY 0x0002 -#define EVENT_REASON_FILTER_AUTH_MODE 0x0003 -#define EVENT_REASON_TIMEOUT 0x00ff - -/* Due to[E id][Length][OUI][Data] may be 257 bytes */ -#define MAX_IE_APPEND_SIZE (256 + 4) - -struct chan_info { - u8 band; - u8 ChanNo; -}; - -struct radio_off { - u8 boHwRadioOff; - u8 boSwRadioOff; -}; - -struct wb_local_para { - /* read from EPROM, manufacture set for each NetCard */ - u8 PermanentAddress[MAC_ADDR_LENGTH + 2]; - /* the driver will use this one actually. */ - u8 ThisMacAddress[MAC_ADDR_LENGTH + 2]; - u32 MTUsize; /* Ind to Uplayer, Max transmission unit size */ - u8 region_INF; /* region setting from INF */ - u8 region; /* real region setting of the device */ - u8 Reserved_1[2]; - - /* power-save variables */ - u8 iPowerSaveMode; /* 0 indicates on, 1 indicates off */ - u8 ATIMmode; - u8 ExcludeUnencrypted; - /* Unit time count for the decision to enter PS mode */ - u16 CheckCountForPS; - u8 boHasTxActivity;/* tx activity has occurred */ - u8 boMacPsValid; /* Power save mode obtained - * from H/W is valid or not - */ - - /* Rate */ - u8 TxRateMode; /* - * Initial, input from Registry, - * may be updated by GUI - * Tx Rate Mode: auto(DTO on), max, 1M, 2M, .. - */ - u8 CurrentTxRate; /* The current Tx rate */ - u8 CurrentTxRateForMng; /* - * The current Tx rate for management - * frames. It will be decided before - * connection succeeds. - */ - u8 CurrentTxFallbackRate; - - /* for Rate handler */ - u8 BRateSet[32]; /* basic rate set */ - u8 SRateSet[32]; /* support rate set */ - - u8 NumOfBRate; - u8 NumOfSRate; - u8 NumOfDsssRateInSRate; /* number of DSSS rates in - * supported rate set - */ - u8 reserved1; - - u32 dwBasicRateBitmap; /* bit map of basic rates */ - - u32 dwSupportRateBitmap; /* bit map of all support rates - * including basic and operational - * rates - */ - - - /* For SME/MLME handler */ - - u16 wOldSTAindex; /* valid when boHandover=TRUE, - * store old connected STA index - */ - u16 wConnectedSTAindex; /* Index of peerly connected AP or - * IBSS in the descriptionset. - */ - u16 Association_ID; /* The Association ID in the - * (Re)Association Response frame. - */ - u16 ListenInterval; /* The listen interval when SME invoking - * MLME_ (Re)Associate_Request(). - */ - - struct radio_off RadioOffStatus; - u8 Reserved0[2]; - u8 boMsRadioOff; /* Ndis demands to be true when set - * Disassoc. OID and be false when - * set SSID OID. - */ - u8 bAntennaNo; /* which antenna */ - u8 bConnectFlag; /* the connect status flag for - * roaming task - */ - - u8 RoamStatus; - u8 reserved7[3]; - - struct chan_info CurrentChan; /* Current channel no. and channel band. - * It may be changed by scanning. - */ - u8 boHandover; /* Roaming, Handover to other AP. */ - u8 boCCAbusy; - - u16 CWMax; /* It may not be the real value - * that H/W used - */ - u8 CWMin; /* 255: set according to 802.11 spec. */ - u8 reserved2; - - /* 11G: */ - u8 bMacOperationMode; /* operation in 802.11b or 802.11g */ - u8 bSlotTimeMode; /* AUTO, s32 */ - u8 bPreambleMode; /* AUTO, s32 */ - u8 boNonERPpresent; - - u8 boProtectMechanism; /* H/W will take the necessary action - * based on this variable - */ - u8 boShortPreamble; /* Same here */ - u8 boShortSlotTime; /* Same here */ - u8 reserved_3; - - u32 RSN_IE_Bitmap; - u32 RSN_OUI_Type; - - /* For the BSSID */ - u8 HwBssid[MAC_ADDR_LENGTH + 2]; - u32 HwBssidValid; - - /* For scan list */ - u8 BssListCount; /* Total count of valid - * descriptor indexes - */ - u8 boReceiveUncorrectInfo; /* important settings in beacon/probe - * resp. have been changed - */ - u8 NoOfJoinerInIbss; - u8 reserved_4; - - /* Store the valid descriptor indexes obtained from scannings */ - u8 BssListIndex[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03]; - /* - * Save the BssDescriptor index in this IBSS. - * The index 0 is local descriptor (psLOCAL->wConnectedSTAindex). - * If CONNECTED : NoOfJoinerInIbss >= 2 - * else : NoOfJoinerInIbss <= 1 - */ - u8 JoinerInIbss[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03]; - - /* General Statistics, count at Rx_handler or - * Tx_callback interrupt handler - */ - u64 GS_XMIT_OK; /* Good Frames Transmitted */ - u64 GS_RCV_OK; /* Good Frames Received */ - u32 GS_RCV_ERROR; /* Frames received with crc error */ - u32 GS_XMIT_ERROR; /* Bad Frames Transmitted */ - u32 GS_RCV_NO_BUFFER; /* Receive Buffer underrun */ - u32 GS_XMIT_ONE_COLLISION; /* one collision */ - u32 GS_XMIT_MORE_COLLISIONS;/* more collisions */ - - /* - * ================================================================ - * Statistics (no matter whether it had done successfully) -wkchen - * ================================================================ - */ - u32 _NumRxMSDU; - u32 _NumTxMSDU; - u32 _dot11WEPExcludedCount; - u32 _dot11WEPUndecryptableCount; - u32 _dot11FrameDuplicateCount; - - struct chan_info IbssChanSetting; /* 2B. Start IBSS Channel - * setting by registry or - * WWU. - */ - u8 reserved_5[2]; /* It may not be used after - * considering RF type, region - * and modulation type. - */ - - u8 reserved_6[2]; /* two variables are for wep - * key error detection - */ - u32 bWepKeyError; - u32 bToSelfPacketReceived; - u32 WepKeyDetectTimerCount; - - u16 SignalLostTh; - u16 SignalRoamTh; - - u8 IE_Append_data[MAX_IE_APPEND_SIZE]; - u16 IE_Append_size; - u16 reserved_7; -}; - -#endif diff --git a/drivers/staging/winbond/mac_structures.h b/drivers/staging/winbond/mac_structures.h deleted file mode 100644 index 76c63c7..0000000 --- a/drivers/staging/winbond/mac_structures.h +++ /dev/null @@ -1,71 +0,0 @@ -/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -// MAC_Structures.h -// -// This file contains the definitions and data structures used by SW-MAC. -// -// Revision Histoy -//================= -// 0.1 2002 UN00 -// 0.2 20021004 PD43 CCLiu6 -// 20021018 PD43 CCLiu6 -// Add enum_TxRate type -// Modify enum_STAState type -// 0.3 20021023 PE23 CYLiu update MAC session struct -// 20021108 -// 20021122 PD43 Austin -// Deleted some unused. -// 20021129 PD43 Austin -// 20030617 increase the 802.11g definition -//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ - -#ifndef _MAC_Structures_H_ -#define _MAC_Structures_H_ - -#define MAC_ADDR_LENGTH 6 - -/* ======================================================== -// 802.11 Frame define -//----- */ -#define DOT_11_MAC_HEADER_SIZE 24 -#define DOT_11_SNAP_SIZE 6 -#define DOT_11_DURATION_OFFSET 2 -/* Sequence control offset */ -#define DOT_11_SEQUENCE_OFFSET 22 -/* The start offset of 802.11 Frame// */ -#define DOT_11_TYPE_OFFSET 30 -#define DOT_11_DATA_OFFSET 24 -#define DOT_11_DA_OFFSET 4 - -#define MAX_ETHERNET_PACKET_SIZE 1514 - -/* ----- management : Type of Bits (2, 3) and Subtype of Bits (4, 5, 6, 7) */ -#define MAC_SUBTYPE_MNGMNT_ASSOC_REQUEST 0x00 -#define MAC_SUBTYPE_MNGMNT_ASSOC_RESPONSE 0x10 -#define MAC_SUBTYPE_MNGMNT_REASSOC_REQUEST 0x20 -#define MAC_SUBTYPE_MNGMNT_REASSOC_RESPONSE 0x30 -#define MAC_SUBTYPE_MNGMNT_PROBE_REQUEST 0x40 -#define MAC_SUBTYPE_MNGMNT_PROBE_RESPONSE 0x50 -#define MAC_SUBTYPE_MNGMNT_BEACON 0x80 -#define MAC_SUBTYPE_MNGMNT_ATIM 0x90 -#define MAC_SUBTYPE_MNGMNT_DISASSOCIATION 0xA0 -#define MAC_SUBTYPE_MNGMNT_AUTHENTICATION 0xB0 -#define MAC_SUBTYPE_MNGMNT_DEAUTHENTICATION 0xC0 - -#define RATE_AUTO 0 -#define RATE_1M 2 -#define RATE_2M 4 -#define RATE_5dot5M 11 -#define RATE_6M 12 -#define RATE_9M 18 -#define RATE_11M 22 -#define RATE_12M 24 -#define RATE_18M 36 -#define RATE_22M 44 -#define RATE_24M 48 -#define RATE_33M 66 -#define RATE_36M 72 -#define RATE_48M 96 -#define RATE_54M 108 -#define RATE_MAX 255 - -#endif /* _MAC_Structure_H_ */ diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c deleted file mode 100644 index aef0855..0000000 --- a/drivers/staging/winbond/mds.c +++ /dev/null @@ -1,650 +0,0 @@ -#include "mds_f.h" -#include "mto.h" -#include "wbhal.h" -#include "wb35tx_f.h" - -unsigned char -Mds_initial(struct wbsoft_priv *adapter) -{ - struct wb35_mds *pMds = &adapter->Mds; - - pMds->TxPause = false; - pMds->TxRTSThreshold = DEFAULT_RTSThreshold; - pMds->TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; - - return hal_get_tx_buffer(&adapter->sHwData, &pMds->pTxBuffer); -} - -static void Mds_DurationSet(struct wbsoft_priv *adapter, - struct wb35_descriptor *pDes, u8 *buffer) -{ - struct T00_descriptor *pT00; - struct T01_descriptor *pT01; - u16 Duration, NextBodyLen, OffsetSize; - u8 Rate, i; - unsigned char CTS_on = false, RTS_on = false; - struct T00_descriptor *pNextT00; - u16 BodyLen = 0; - unsigned char boGroupAddr = false; - - OffsetSize = pDes->FragmentThreshold + 32 + 3; - OffsetSize &= ~0x03; - Rate = pDes->TxRate >> 1; - if (!Rate) - Rate = 1; - - pT00 = (struct T00_descriptor *)buffer; - pT01 = (struct T01_descriptor *)(buffer+4); - pNextT00 = (struct T00_descriptor *)(buffer+OffsetSize); - - if (buffer[DOT_11_DA_OFFSET+8] & 0x1) /* +8 for USB hdr */ - boGroupAddr = true; - - /****************************************** - * Set RTS/CTS mechanism - ******************************************/ - if (!boGroupAddr) { - /* NOTE : If the protection mode is enabled and the MSDU will - * be fragmented, the tx rates of MPDUs will all be DSSS - * rates. So it will not use CTS-to-self in this case. - * CTS-To-self will only be used when without - * fragmentation. -- 20050112 */ - BodyLen = (u16)pT00->T00_frame_length; /* include 802.11 header */ - BodyLen += 4; /* CRC */ - - if (BodyLen >= CURRENT_RTS_THRESHOLD) - RTS_on = true; /* Using RTS */ - else { - if (pT01->T01_modulation_type) { /* Is using OFDM */ - /* Is using protect */ - if (CURRENT_PROTECT_MECHANISM) - CTS_on = true; /* Using CTS */ - } - } - } - - if (RTS_on || CTS_on) { - if (pT01->T01_modulation_type) { /* Is using OFDM */ - /* CTS duration - * 2 SIFS + DATA transmit time + 1 ACK - * ACK Rate : 24 Mega bps - * ACK frame length = 14 bytes */ - Duration = 2*DEFAULT_SIFSTIME + - 2*PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION + - ((BodyLen*8 + 22 + Rate*4 - 1)/(Rate*4))*Tsym + - ((112 + 22 + 95)/96)*Tsym; - } else { /* DSSS */ - /* CTS duration - * 2 SIFS + DATA transmit time + 1 ACK - * Rate : ?? Mega bps - * ACK frame length = 14 bytes */ - if (pT01->T01_plcp_header_length) /* long preamble */ - Duration = LONG_PREAMBLE_PLUS_PLCPHEADER_TIME*2; - else - Duration = SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME*2; - - Duration += (((BodyLen + 14)*8 + Rate-1) / Rate + - DEFAULT_SIFSTIME*2); - } - - if (RTS_on) { - if (pT01->T01_modulation_type) { /* Is using OFDM */ - /* CTS + 1 SIFS + CTS duration - * CTS Rate : 24 Mega bps - * CTS frame length = 14 bytes */ - Duration += (DEFAULT_SIFSTIME + - PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION + - ((112 + 22 + 95)/96)*Tsym); - } else { - /* CTS + 1 SIFS + CTS duration - * CTS Rate : ?? Mega bps - * CTS frame length = 14 bytes - */ - /* long preamble */ - if (pT01->T01_plcp_header_length) - Duration += LONG_PREAMBLE_PLUS_PLCPHEADER_TIME; - else - Duration += SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME; - - Duration += (((112 + Rate-1) / Rate) + - DEFAULT_SIFSTIME); - } - } - - /* Set the value into USB descriptor */ - pT01->T01_add_rts = RTS_on ? 1 : 0; - pT01->T01_add_cts = CTS_on ? 1 : 0; - pT01->T01_rts_cts_duration = Duration; - } - - /****************************************** - * Fill the more fragment descriptor - ******************************************/ - if (boGroupAddr) - Duration = 0; - else { - for (i = pDes->FragmentCount-1; i > 0; i--) { - NextBodyLen = (u16)pNextT00->T00_frame_length; - NextBodyLen += 4; /* CRC */ - - if (pT01->T01_modulation_type) { - /* OFDM - * data transmit time + 3 SIFS + 2 ACK - * Rate : ??Mega bps - * ACK frame length = 14 bytes, tx rate = 24M */ - Duration = PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION * 3; - Duration += (((NextBodyLen*8 + 22 + Rate*4 - 1) - /(Rate*4)) * Tsym + - (((2*14)*8 + 22 + 95)/96)*Tsym + - DEFAULT_SIFSTIME*3); - } else { - /* DSSS - * data transmit time + 2 ACK + 3 SIFS - * Rate : ??Mega bps - * ACK frame length = 14 bytes - * TODO : */ - if (pT01->T01_plcp_header_length) /* long preamble */ - Duration = LONG_PREAMBLE_PLUS_PLCPHEADER_TIME*3; - else - Duration = SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME*3; - - Duration += (((NextBodyLen + (2*14))*8 - + Rate-1) / Rate + - DEFAULT_SIFSTIME*3); - } - /* 4 USHOR for skip 8B USB, 2USHORT=FC + Duration */ - ((u16 *)buffer)[5] = cpu_to_le16(Duration); - - /* ----20061009 add by anson's endian */ - pNextT00->value = cpu_to_le32(pNextT00->value); - pT01->value = cpu_to_le32(pT01->value); - /* ----end 20061009 add by anson's endian */ - - buffer += OffsetSize; - pT01 = (struct T01_descriptor *)(buffer+4); - /* The last fragment will not have the next fragment */ - if (i != 1) - pNextT00 = (struct T00_descriptor *)(buffer+OffsetSize); - } - - /******************************************* - * Fill the last fragment descriptor - *******************************************/ - if (pT01->T01_modulation_type) { - /* OFDM - * 1 SIFS + 1 ACK - * Rate : 24 Mega bps - * ACK frame length = 14 bytes */ - Duration = PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION; - /* The Tx rate of ACK use 24M */ - Duration += (((112 + 22 + 95)/96)*Tsym + - DEFAULT_SIFSTIME); - } else { - /* DSSS - * 1 ACK + 1 SIFS - * Rate : ?? Mega bps - * ACK frame length = 14 bytes(112 bits) */ - if (pT01->T01_plcp_header_length) /* long preamble */ - Duration = LONG_PREAMBLE_PLUS_PLCPHEADER_TIME; - else - Duration = SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME; - - Duration += ((112 + Rate-1)/Rate + DEFAULT_SIFSTIME); - } - } - - /* 4 USHOR for skip 8B USB, 2USHORT=FC + Duration */ - ((u16 *)buffer)[5] = cpu_to_le16(Duration); - pT00->value = cpu_to_le32(pT00->value); - pT01->value = cpu_to_le32(pT01->value); - /* --end 20061009 add */ - -} - -/* The function return the 4n size of usb pk */ -static u16 Mds_BodyCopy(struct wbsoft_priv *adapter, - struct wb35_descriptor *pDes, u8 *TargetBuffer) -{ - struct T00_descriptor *pT00; - struct wb35_mds *pMds = &adapter->Mds; - u8 *buffer; - u8 *src_buffer; - u8 *pctmp; - u16 Size = 0; - u16 SizeLeft, CopySize, CopyLeft, stmp; - u8 buf_index, FragmentCount = 0; - - - /* Copy fragment body */ - buffer = TargetBuffer; /* shift 8B usb + 24B 802.11 */ - SizeLeft = pDes->buffer_total_size; - buf_index = pDes->buffer_start_index; - - pT00 = (struct T00_descriptor *)buffer; - while (SizeLeft) { - pT00 = (struct T00_descriptor *)buffer; - CopySize = SizeLeft; - if (SizeLeft > pDes->FragmentThreshold) { - CopySize = pDes->FragmentThreshold; - /* Set USB length */ - pT00->T00_frame_length = 24 + CopySize; - } else /* Set USB length */ - pT00->T00_frame_length = 24 + SizeLeft; - - SizeLeft -= CopySize; - - /* 1 Byte operation */ - pctmp = (u8 *)(buffer + 8 + DOT_11_SEQUENCE_OFFSET); - *pctmp &= 0xf0; - *pctmp |= FragmentCount; /* 931130.5.m */ - if (!FragmentCount) - pT00->T00_first_mpdu = 1; - - buffer += 32; /* 8B usb + 24B 802.11 header */ - Size += 32; - - /* Copy into buffer */ - stmp = CopySize + 3; - stmp &= ~0x03; /* 4n Alignment */ - Size += stmp; /* Current 4n offset of mpdu */ - - while (CopySize) { - /* Copy body */ - src_buffer = pDes->buffer_address[buf_index]; - CopyLeft = CopySize; - if (CopySize >= pDes->buffer_size[buf_index]) { - CopyLeft = pDes->buffer_size[buf_index]; - - /* Get the next buffer of descriptor */ - buf_index++; - buf_index %= MAX_DESCRIPTOR_BUFFER_INDEX; - } else { - u8 *pctmp = pDes->buffer_address[buf_index]; - pctmp += CopySize; - pDes->buffer_address[buf_index] = pctmp; - pDes->buffer_size[buf_index] -= CopySize; - } - - memcpy(buffer, src_buffer, CopyLeft); - buffer += CopyLeft; - CopySize -= CopyLeft; - } - - /* 931130.5.n */ - if (pMds->MicAdd) { - if (!SizeLeft) { - pMds->MicWriteAddress[pMds->MicWriteIndex] = - buffer - pMds->MicAdd; - pMds->MicWriteSize[pMds->MicWriteIndex] = - pMds->MicAdd; - pMds->MicAdd = 0; - } else if (SizeLeft < 8) { /* 931130.5.p */ - pMds->MicAdd = SizeLeft; - pMds->MicWriteAddress[pMds->MicWriteIndex] = - buffer - (8 - SizeLeft); - pMds->MicWriteSize[pMds->MicWriteIndex] = - 8 - SizeLeft; - pMds->MicWriteIndex++; - } - } - - /* Does it need to generate the new header for next mpdu? */ - if (SizeLeft) { - /* Get the next 4n start address */ - buffer = TargetBuffer + Size; - /* Copy 8B USB +24B 802.11 */ - memcpy(buffer, TargetBuffer, 32); - pT00 = (struct T00_descriptor *)buffer; - pT00->T00_first_mpdu = 0; - } - - FragmentCount++; - } - - pT00->T00_last_mpdu = 1; - pT00->T00_IsLastMpdu = 1; - buffer = (u8 *)pT00 + 8; /* +8 for USB hdr */ - buffer[1] &= ~0x04; /* Clear more frag bit of 802.11 frame control */ - /* Update the correct fragment number */ - pDes->FragmentCount = FragmentCount; - return Size; -} - -static void Mds_HeaderCopy(struct wbsoft_priv *adapter, - struct wb35_descriptor *pDes, u8 *TargetBuffer) -{ - struct wb35_mds *pMds = &adapter->Mds; - u8 *src_buffer = pDes->buffer_address[0]; /* 931130.5.g */ - struct T00_descriptor *pT00; - struct T01_descriptor *pT01; - u16 stmp; - u8 i, ctmp1, ctmp2, ctmpf; - u16 FragmentThreshold = CURRENT_FRAGMENT_THRESHOLD; - - - stmp = pDes->buffer_total_size; - /* - * Set USB header 8 byte - */ - pT00 = (struct T00_descriptor *)TargetBuffer; - TargetBuffer += 4; - pT01 = (struct T01_descriptor *)TargetBuffer; - TargetBuffer += 4; - - pT00->value = 0; /* Clear */ - pT01->value = 0; /* Clear */ - - pT00->T00_tx_packet_id = pDes->Descriptor_ID; /* Set packet ID */ - pT00->T00_header_length = 24; /* Set header length */ - pT01->T01_retry_abort_enable = 1; /* 921013 931130.5.h */ - - /* Key ID setup */ - pT01->T01_wep_id = 0; - - FragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; /* Do not fragment */ - /* Copy full data, the 1'st buffer contain all the data 931130.5.j */ - /* Copy header */ - memcpy(TargetBuffer, src_buffer, DOT_11_MAC_HEADER_SIZE); - pDes->buffer_address[0] = src_buffer + DOT_11_MAC_HEADER_SIZE; - pDes->buffer_total_size -= DOT_11_MAC_HEADER_SIZE; - pDes->buffer_size[0] = pDes->buffer_total_size; - - /* Set fragment threshold */ - FragmentThreshold -= (DOT_11_MAC_HEADER_SIZE + 4); - pDes->FragmentThreshold = FragmentThreshold; - - /* Set more frag bit */ - TargetBuffer[1] |= 0x04; /* Set more frag bit */ - - /* - * Set tx rate - */ - stmp = *(u16 *)(TargetBuffer+30); /* 2n alignment address */ - - /* Use basic rate */ - ctmp1 = ctmpf = CURRENT_TX_RATE_FOR_MNG; - - pDes->TxRate = ctmp1; - pr_debug("Tx rate =%x\n", ctmp1); - - pT01->T01_modulation_type = (ctmp1%3) ? 0 : 1; - - for (i = 0; i < 2; i++) { - if (i == 1) - ctmp1 = ctmpf; - /* backup the ta rate and fall back rate */ - pMds->TxRate[pDes->Descriptor_ID][i] = ctmp1; - - if (ctmp1 == 108) - ctmp2 = 7; - else if (ctmp1 == 96) - ctmp2 = 6; /* Rate convert for USB */ - else if (ctmp1 == 72) - ctmp2 = 5; - else if (ctmp1 == 48) - ctmp2 = 4; - else if (ctmp1 == 36) - ctmp2 = 3; - else if (ctmp1 == 24) - ctmp2 = 2; - else if (ctmp1 == 18) - ctmp2 = 1; - else if (ctmp1 == 12) - ctmp2 = 0; - else if (ctmp1 == 22) - ctmp2 = 3; - else if (ctmp1 == 11) - ctmp2 = 2; - else if (ctmp1 == 4) - ctmp2 = 1; - else - ctmp2 = 0; /* if( ctmp1 == 2 ) or default */ - - if (i == 0) - pT01->T01_transmit_rate = ctmp2; - else - pT01->T01_fall_back_rate = ctmp2; - } - - /* - * Set preamble type - */ - /* RATE_1M */ - if ((pT01->T01_modulation_type == 0) && (pT01->T01_transmit_rate == 0)) - pDes->PreambleMode = WLAN_PREAMBLE_TYPE_LONG; - else - pDes->PreambleMode = CURRENT_PREAMBLE_MODE; - pT01->T01_plcp_header_length = pDes->PreambleMode; /* Set preamble */ - -} - -static void MLME_GetNextPacket(struct wbsoft_priv *adapter, - struct wb35_descriptor *desc) -{ - desc->InternalUsed = desc->buffer_start_index + desc->buffer_number; - desc->InternalUsed %= MAX_DESCRIPTOR_BUFFER_INDEX; - desc->buffer_address[desc->InternalUsed] = adapter->sMlmeFrame.pMMPDU; - desc->buffer_size[desc->InternalUsed] = adapter->sMlmeFrame.len; - desc->buffer_total_size += adapter->sMlmeFrame.len; - desc->buffer_number++; - desc->Type = adapter->sMlmeFrame.data_type; -} - -static void MLMEfreeMMPDUBuffer(struct wbsoft_priv *adapter, s8 *pData) -{ - int i; - - /* Reclaim the data buffer */ - for (i = 0; i < MAX_NUM_TX_MMPDU; i++) { - if (pData == (s8 *)&(adapter->sMlmeFrame.TxMMPDU[i])) - break; - } - if (adapter->sMlmeFrame.TxMMPDUInUse[i]) - adapter->sMlmeFrame.TxMMPDUInUse[i] = false; - else { - /* Something wrong - PD43 Add debug code here??? */ - } -} - -static void MLME_SendComplete(struct wbsoft_priv *adapter, u8 PacketID, - unsigned char SendOK) -{ - /* Reclaim the data buffer */ - adapter->sMlmeFrame.len = 0; - MLMEfreeMMPDUBuffer(adapter, adapter->sMlmeFrame.pMMPDU); - - /* Return resource */ - adapter->sMlmeFrame.is_in_used = PACKET_FREE_TO_USE; -} - -void -Mds_Tx(struct wbsoft_priv *adapter) -{ - struct hw_data *pHwData = &adapter->sHwData; - struct wb35_mds *pMds = &adapter->Mds; - struct wb35_descriptor TxDes; - struct wb35_descriptor *pTxDes = &TxDes; - u8 *XmitBufAddress; - u16 XmitBufSize, PacketSize, stmp, CurrentSize, FragmentThreshold; - u8 FillIndex, TxDesIndex, FragmentCount, FillCount; - unsigned char BufferFilled = false; - - - if (pMds->TxPause) - return; - if (!hal_driver_init_OK(pHwData)) - return; - - /* Only one thread can be run here */ - if (atomic_inc_return(&pMds->TxThreadCount) != 1) - goto cleanup; - - /* Start to fill the data */ - do { - FillIndex = pMds->TxFillIndex; - /* Is owned by software 0:Yes 1:No */ - if (pMds->TxOwner[FillIndex]) { - pr_debug("[Mds_Tx] Tx Owner is H/W.\n"); - break; - } - - /* Get buffer */ - XmitBufAddress = pMds->pTxBuffer + (MAX_USB_TX_BUFFER * FillIndex); - XmitBufSize = 0; - FillCount = 0; - do { - PacketSize = adapter->sMlmeFrame.len; - if (!PacketSize) - break; - - /* For Check the buffer resource */ - FragmentThreshold = CURRENT_FRAGMENT_THRESHOLD; - /* 931130.5.b */ - FragmentCount = PacketSize/FragmentThreshold + 1; - /* 931130.5.c 8:MIC */ - stmp = PacketSize + FragmentCount*32 + 8; - if ((XmitBufSize + stmp) >= MAX_USB_TX_BUFFER) - break; /* buffer is not enough */ - - /* - * Start transmitting - */ - BufferFilled = true; - - /* Leaves first u8 intact */ - memset((u8 *)pTxDes + 1, 0, sizeof(struct wb35_descriptor) - 1); - - TxDesIndex = pMds->TxDesIndex; /* Get the current ID */ - pTxDes->Descriptor_ID = TxDesIndex; - /* Storing the information of source coming from */ - pMds->TxDesFrom[TxDesIndex] = 2; - pMds->TxDesIndex++; - pMds->TxDesIndex %= MAX_USB_TX_DESCRIPTOR; - - MLME_GetNextPacket(adapter, pTxDes); - - /* - * Copy header. 8byte USB + 24byte 802.11Hdr. - * Set TxRate, Preamble type - */ - Mds_HeaderCopy(adapter, pTxDes, XmitBufAddress); - - /* For speed up Key setting */ - if (pTxDes->EapFix) { - pr_debug("35: EPA 4th frame detected. Size = %d\n", - PacketSize); - pHwData->IsKeyPreSet = 1; - } - - /* Copy (fragment) frame body, and set USB, 802.11 hdr flag */ - CurrentSize = Mds_BodyCopy(adapter, pTxDes, XmitBufAddress); - - /* Set RTS/CTS and Normal duration field into buffer */ - Mds_DurationSet(adapter, pTxDes, XmitBufAddress); - - /* Shift to the next address */ - XmitBufSize += CurrentSize; - XmitBufAddress += CurrentSize; - - /* Get packet to transmit completed, - * 1:TESTSTA 2:MLME 3: Ndis data - */ - MLME_SendComplete(adapter, 0, true); - - /* Software TSC count 20060214 */ - pMds->TxTsc++; - if (pMds->TxTsc == 0) - pMds->TxTsc_2++; - - FillCount++; /* 20060928 */ - /* - * End of multiple MSDU copy loop. - * false = single - * true = multiple sending - */ - } while (HAL_USB_MODE_BURST(pHwData)); - - /* Move to the next one, if necessary */ - if (BufferFilled) { - /* size setting */ - pMds->TxBufferSize[FillIndex] = XmitBufSize; - - /* 20060928 set Tx count */ - pMds->TxCountInBuffer[FillIndex] = FillCount; - - /* Set owner flag */ - pMds->TxOwner[FillIndex] = 1; - - pMds->TxFillIndex++; - pMds->TxFillIndex %= MAX_USB_TX_BUFFER_NUMBER; - BufferFilled = false; - } else - break; - - if (!PacketSize) /* No more pk for transmitting */ - break; - - } while (true); - - /* - * Start to send by lower module - */ - if (!pHwData->IsKeyPreSet) - Wb35Tx_start(adapter); - -cleanup: - atomic_dec(&pMds->TxThreadCount); -} - -void -Mds_SendComplete(struct wbsoft_priv *adapter, struct T02_descriptor *pT02) -{ - struct wb35_mds *pMds = &adapter->Mds; - struct hw_data *pHwData = &adapter->sHwData; - u8 PacketId = (u8)pT02->T02_Tx_PktID; - unsigned char SendOK = true; - u8 RetryCount, TxRate; - - if (pT02->T02_IgnoreResult) /* Don't care about the result */ - return; - if (pT02->T02_IsLastMpdu) { - /* TODO: DTO -- get the retry count and fragment count */ - /* Tx rate */ - TxRate = pMds->TxRate[PacketId][0]; - RetryCount = (u8)pT02->T02_MPDU_Cnt; - if (pT02->value & FLAG_ERROR_TX_MASK) { - SendOK = false; - - if (pT02->T02_transmit_abort || pT02->T02_out_of_MaxTxMSDULiftTime) { - /* retry error */ - pHwData->dto_tx_retry_count += (RetryCount+1); - /* [for tx debug] */ - if (RetryCount < 7) - pHwData->tx_retry_count[RetryCount] += RetryCount; - else - pHwData->tx_retry_count[7] += RetryCount; - pr_debug("dto_tx_retry_count =%d\n", - pHwData->dto_tx_retry_count); - MTO_SetTxCount(adapter, TxRate, RetryCount); - } - pHwData->dto_tx_frag_count += (RetryCount+1); - - /* [for tx debug] */ - if (pT02->T02_transmit_abort_due_to_TBTT) - pHwData->tx_TBTT_start_count++; - if (pT02->T02_transmit_without_encryption_due_to_wep_on_false) - pHwData->tx_WepOn_false_count++; - if (pT02->T02_discard_due_to_null_wep_key) - pHwData->tx_Null_key_count++; - } else { - if (pT02->T02_effective_transmission_rate) - pHwData->tx_ETR_count++; - MTO_SetTxCount(adapter, TxRate, RetryCount); - } - - /* Clear send result buffer */ - pMds->TxResult[PacketId] = 0; - } else - pMds->TxResult[PacketId] |= ((u16)(pT02->value & 0x0ffff)); -} diff --git a/drivers/staging/winbond/mds_f.h b/drivers/staging/winbond/mds_f.h deleted file mode 100644 index 159b2eb..0000000 --- a/drivers/staging/winbond/mds_f.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef __WINBOND_MDS_F_H -#define __WINBOND_MDS_F_H - -#include "wbhal.h" -#include "core.h" - -unsigned char Mds_initial(struct wbsoft_priv *adapter); -void Mds_Tx(struct wbsoft_priv *adapter); -void Mds_SendComplete(struct wbsoft_priv *adapter, struct T02_descriptor *pt02); -void Mds_MpduProcess(struct wbsoft_priv *adapter, - struct wb35_descriptor *prxdes); - -/* For data frame sending */ -u16 MDS_GetPacketSize(struct wbsoft_priv *adapter); -void MDS_GetNextPacket(struct wbsoft_priv *adapter, - struct wb35_descriptor *pdes); -void MDS_GetNextPacketComplete(struct wbsoft_priv *adapter, - struct wb35_descriptor *pdes); -void MDS_SendResult(struct wbsoft_priv *adapter, u8 packetid, - unsigned char sendok); - -#endif diff --git a/drivers/staging/winbond/mds_s.h b/drivers/staging/winbond/mds_s.h deleted file mode 100644 index 2972d66..0000000 --- a/drivers/staging/winbond/mds_s.h +++ /dev/null @@ -1,130 +0,0 @@ -#ifndef __WINBOND_MDS_H -#define __WINBOND_MDS_H - -#include <linux/timer.h> -#include <linux/types.h> -#include <linux/atomic.h> - -#include "localpara.h" -#include "mac_structures.h" - -/* Preamble_Type, see <SFS-802.11G-MIB-203> */ -enum { - WLAN_PREAMBLE_TYPE_SHORT, - WLAN_PREAMBLE_TYPE_LONG, -}; - -/*****************************************************************************/ -#define MAX_USB_TX_DESCRIPTOR 15 /* IS89C35 ability */ -#define MAX_USB_TX_BUFFER_NUMBER 4 /* Virtual pre-buffer number of MAX_USB_TX_BUFFER */ -#define MAX_USB_TX_BUFFER 4096 /* IS89C35 ability 4n alignment is required for hardware */ - -#define AUTH_REQUEST_PAIRWISE_ERROR 0 /* _F flag setting */ -#define AUTH_REQUEST_GROUP_ERROR 1 /* _F flag setting */ - -#define CURRENT_FRAGMENT_THRESHOLD (adapter->Mds.TxFragmentThreshold & ~0x1) -#define CURRENT_PREAMBLE_MODE (psLOCAL->boShortPreamble ? WLAN_PREAMBLE_TYPE_SHORT : WLAN_PREAMBLE_TYPE_LONG) -#define CURRENT_TX_RATE_FOR_MNG (adapter->sLocalPara.CurrentTxRateForMng) -#define CURRENT_PROTECT_MECHANISM (psLOCAL->boProtectMechanism) -#define CURRENT_RTS_THRESHOLD (adapter->Mds.TxRTSThreshold) - -#define MIB_GS_XMIT_OK_INC (adapter->sLocalPara.GS_XMIT_OK++) -#define MIB_GS_RCV_OK_INC (adapter->sLocalPara.GS_RCV_OK++) -#define MIB_GS_XMIT_ERROR_INC (adapter->sLocalPara.GS_XMIT_ERROR) - -/* ---------- TX ----------------------------------- */ -#define ETHERNET_TX_DESCRIPTORS MAX_USB_TX_BUFFER_NUMBER - -/* ---------- RX ----------------------------------- */ -#define ETHERNET_RX_DESCRIPTORS 8 /* It's not necessary to allocate more than 2 in sync indicate */ - -/* - * ================================================================ - * Configuration default value - * ================================================================ - */ -#define DEFAULT_MULTICASTLISTMAX 32 /* standard */ -#define DEFAULT_TX_BURSTLENGTH 3 /* 32 Longwords */ -#define DEFAULT_RX_BURSTLENGTH 3 /* 32 Longwords */ -#define DEFAULT_TX_THRESHOLD 0 /* Full Packet */ -#define DEFAULT_RX_THRESHOLD 0 /* Full Packet */ -#define DEFAULT_MAXTXRATE 6 /* 11 Mbps (Long) */ -#define DEFAULT_CHANNEL 3 /* Chennel 3 */ -#define DEFAULT_RTSThreshold 2347 /* Disable RTS */ -#define DEFAULT_PME 0 /* Disable */ -#define DEFAULT_SIFSTIME 10 -#define DEFAULT_ACKTIME_1ML 304 /* 148 + 44 + 112 */ -#define DEFAULT_ACKTIME_2ML 248 /* 148 + 44 + 56 */ -#define DEFAULT_FRAGMENT_THRESHOLD 2346 /* No fragment */ -#define DEFAULT_PREAMBLE_LENGTH 72 -#define DEFAULT_PLCPHEADERTIME_LENGTH 24 - -/* - * ------------------------------------------------------------------------ - * 0.96 sec since time unit of the R03 for the current, W89C32 is about 60ns - * instead of 960 ns. This shall be fixed in the future W89C32 - * ------------------------------------------------------------------------- - */ -#define DEFAULT_MAX_RECEIVE_TIME 16440000 - -#define RX_BUF_SIZE 2352 /* 600 - For 301 must be multiple of 8 */ -#define MAX_RX_DESCRIPTORS 18 /* Rx Layer 2 */ - -/* For brand-new rx system */ -#define MDS_ID_IGNORE ETHERNET_RX_DESCRIPTORS - -/* For Tx Packet status classify */ -#define PACKET_FREE_TO_USE 0 -#define PACKET_COME_FROM_NDIS 0x08 -#define PACKET_COME_FROM_MLME 0x80 -#define PACKET_SEND_COMPLETE 0xff - -struct wb35_mds { - /* For Tx usage */ - u8 TxOwner[((MAX_USB_TX_BUFFER_NUMBER + 3) & ~0x03)]; - u8 *pTxBuffer; - u16 TxBufferSize[((MAX_USB_TX_BUFFER_NUMBER + 1) & ~0x01)]; - u8 TxDesFrom[((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03)];/* 1: MLME 2: NDIS control 3: NDIS data */ - u8 TxCountInBuffer[((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03)]; - - u8 TxFillIndex; /* the next index of TxBuffer can be used */ - u8 TxDesIndex; /* The next index of TxDes can be used */ - u8 ScanTxPause; /* data Tx pause because the scanning is progressing, but probe request Tx won't. */ - u8 TxPause; /*For pause the Mds_Tx modult */ - - atomic_t TxThreadCount; /* For thread counting */ - - u16 TxResult[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)];/* Collect the sending result of Mpdu */ - - u8 MicRedundant[8]; /* For tmp use */ - u8 *MicWriteAddress[2]; /* The start address to fill the Mic, use 2 point due to Mic maybe fragment */ - - u16 MicWriteSize[2]; - - u16 MicAdd; /* If want to add the Mic, this variable equal to 8 */ - u16 MicWriteIndex; /* The number of MicWriteAddress */ - - u8 TxRate[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)][2]; /* [0] current tx rate, [1] fall back rate */ - u8 TxInfo[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)]; /*Store information for callback function */ - - /* ---- for Tx Parameter */ - u16 TxFragmentThreshold; /* For frame body only */ - u16 TxRTSThreshold; - - u32 MaxReceiveTime; - - /* depend on OS, */ - u32 MulticastListNo; - u32 PacketFilter; /* Setting by NDIS, the current packet filter in use. */ - u8 MulticastAddressesArray[DEFAULT_MULTICASTLISTMAX][MAC_ADDR_LENGTH]; - - /* COUNTERMEASURE */ - u8 bMICfailCount; - u8 boCounterMeasureBlock; - u8 reserved_4[2]; - - u32 TxTsc; - u32 TxTsc_2; -}; - -#endif diff --git a/drivers/staging/winbond/mto.c b/drivers/staging/winbond/mto.c deleted file mode 100644 index b031ecd..0000000 --- a/drivers/staging/winbond/mto.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * ============================================================================ - * MTO.C - - * - * Description: - * MAC Throughput Optimization for W89C33 802.11g WLAN STA. - * - * The following MIB attributes or internal variables will be affected - * while the MTO is being executed: - * dot11FragmentationThreshold, - * dot11RTSThreshold, - * transmission rate and PLCP preamble type, - * CCA mode, - * antenna diversity. - * - * Copyright (c) 2003 Winbond Electronics Corp. All rights reserved. - * ============================================================================ - */ - -#include "sme_api.h" -#include "wbhal.h" -#include "wb35reg_f.h" -#include "core.h" -#include "mto.h" - -/* Declare SQ3 to rate and fragmentation threshold table */ -/* Declare fragmentation threshold table */ -#define MTO_MAX_FRAG_TH_LEVELS 5 -#define MTO_MAX_DATA_RATE_LEVELS 12 - -u16 MTO_Frag_Th_Tbl[MTO_MAX_FRAG_TH_LEVELS] = { - 256, 384, 512, 768, 1536 -}; - -/* - * Declare data rate table: - * The following table will be changed at anytime if the operation rate - * supported by AP don't match the table - */ -static u8 MTO_Data_Rate_Tbl[MTO_MAX_DATA_RATE_LEVELS] = { - 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108 -}; - -/* this record the retry rate at different data rate */ -static int retryrate_rec[MTO_MAX_DATA_RATE_LEVELS]; - -static u8 boSparseTxTraffic; - -/* - * =========================================================================== - * MTO_Init -- - * - * Description: - * Initialize MTO parameters. - * - * This function should be invoked during system initialization. - * - * Arguments: - * adapter - The pointer to the Miniport adapter Context - * =========================================================================== - */ -void MTO_Init(struct wbsoft_priv *adapter) -{ - int i; - - MTO_PREAMBLE_TYPE() = MTO_PREAMBLE_SHORT; /* for test */ - - MTO_CNT_ANT(0) = 0; - MTO_CNT_ANT(1) = 0; - MTO_SQ_ANT(0) = 0; - MTO_SQ_ANT(1) = 0; - - MTO_AGING_TIMEOUT() = 0; - - /* The following parameters should be initialized to the values set by user */ - MTO_RATE_LEVEL() = 0; - MTO_FRAG_TH_LEVEL() = 4; - MTO_RTS_THRESHOLD() = MTO_FRAG_TH() + 1; - MTO_RTS_THRESHOLD_SETUP() = MTO_FRAG_TH() + 1; - MTO_RATE_CHANGE_ENABLE() = 1; - MTO_FRAG_CHANGE_ENABLE() = 0; - MTO_POWER_CHANGE_ENABLE() = 1; - MTO_PREAMBLE_CHANGE_ENABLE() = 1; - MTO_RTS_CHANGE_ENABLE() = 0; - - for (i = 0; i < MTO_MAX_DATA_RATE_LEVELS; i++) - retryrate_rec[i] = 5; - - MTO_TXFLOWCOUNT() = 0; - /* --------- DTO threshold parameters ------------- */ - MTOPARA_PERIODIC_CHECK_CYCLE() = 10; - MTOPARA_RSSI_TH_FOR_ANTDIV() = 10; - MTOPARA_TXCOUNT_TH_FOR_CALC_RATE() = 50; - MTOPARA_TXRATE_INC_TH() = 10; - MTOPARA_TXRATE_DEC_TH() = 30; - MTOPARA_TXRATE_EQ_TH() = 40; - MTOPARA_TXRATE_BACKOFF() = 12; - MTOPARA_TXRETRYRATE_REDUCE() = 6; - if (MTO_TXPOWER_FROM_EEPROM == 0xff) { - switch (MTO_HAL()->phy_type) { - case RF_AIROHA_2230: - case RF_AIROHA_2230S: - MTOPARA_TXPOWER_INDEX() = 46; /* MAX-8 @@ Only for AL 2230 */ - break; - case RF_AIROHA_7230: - MTOPARA_TXPOWER_INDEX() = 49; - break; - case RF_WB_242: - MTOPARA_TXPOWER_INDEX() = 10; - break; - case RF_WB_242_1: - MTOPARA_TXPOWER_INDEX() = 24; - break; - } - } else { /* follow the setting from EEPROM */ - MTOPARA_TXPOWER_INDEX() = MTO_TXPOWER_FROM_EEPROM; - } - RFSynthesizer_SetPowerIndex(MTO_HAL(), (u8) MTOPARA_TXPOWER_INDEX()); - /* ------------------------------------------------ */ - - /* For RSSI turning -- Cancel load from EEPROM */ - MTO_DATA().RSSI_high = -41; - MTO_DATA().RSSI_low = -60; -} - -/* =========================================================================== - * Description: - * If we enable DTO, we will ignore the tx count with different tx rate - * from DTO rate. This is because when we adjust DTO tx rate, there could - * be some packets in the tx queue with previous tx rate - */ - -void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 tx_rate, u8 index) -{ - MTO_TXFLOWCOUNT()++; - if ((MTO_ENABLE == 1) && (MTO_RATE_CHANGE_ENABLE() == 1)) { - if (tx_rate == MTO_DATA_RATE()) { - if (index == 0) { - if (boSparseTxTraffic) - MTO_HAL()->dto_tx_frag_count += MTOPARA_PERIODIC_CHECK_CYCLE(); - else - MTO_HAL()->dto_tx_frag_count += 1; - } else { - if (index < 8) { - MTO_HAL()->dto_tx_retry_count += index; - MTO_HAL()->dto_tx_frag_count += (index + 1); - } else { - MTO_HAL()->dto_tx_retry_count += 7; - MTO_HAL()->dto_tx_frag_count += 7; - } - } - } else if (MTO_DATA_RATE() > 48 && tx_rate == 48) { - /* for reducing data rate scheme, do not calculate different data rate. 3 is the reducing data rate at retry. */ - if (index < 3) { - MTO_HAL()->dto_tx_retry_count += index; - MTO_HAL()->dto_tx_frag_count += (index + 1); - } else { - MTO_HAL()->dto_tx_retry_count += 3; - MTO_HAL()->dto_tx_frag_count += 3; - } - - } - } else { - MTO_HAL()->dto_tx_retry_count += index; - MTO_HAL()->dto_tx_frag_count += (index + 1); - } -} diff --git a/drivers/staging/winbond/mto.h b/drivers/staging/winbond/mto.h deleted file mode 100644 index 8d41eed..0000000 --- a/drivers/staging/winbond/mto.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * ================================================================== - * MTO.H - * - * Copyright (c) 2003 Winbond Electronics Corp. All rights reserved. - * ================================================================== - */ -#ifndef __MTO_H__ -#define __MTO_H__ - -#include <linux/types.h> - -struct wbsoft_priv; - -#define MTO_PREAMBLE_LONG WLAN_PREAMBLE_TYPE_LONG -#define MTO_PREAMBLE_SHORT WLAN_PREAMBLE_TYPE_SHORT - -/* Defines the parameters used in the MAC Throughput Optimization algorithm */ -struct wb35_mto_params { - u32 TxFlowCount; /* to judge what kind the tx flow(sparse or busy) is */ - - /* --------- DTO threshold parameters ------------- */ - u16 DTO_PeriodicCheckCycle; - u16 DTO_RssiThForAntDiv; - - u16 DTO_TxCountThForCalcNewRate; - u16 DTO_TxRateIncTh; - - u16 DTO_TxRateDecTh; - u16 DTO_TxRateEqTh; - - u16 DTO_TxRateBackOff; - u16 DTO_TxRetryRateReduce; - - u16 DTO_TxPowerIndex; /* 0 ~ 31 */ - u16 reserved_1; - /* ------------------------------------------------ */ - - u8 PowerChangeEnable; - u8 AntDiversityEnable; - u8 CCA_Mode; - u8 CCA_Mode_Setup; - u8 Preamble_Type; - u8 PreambleChangeEnable; - - u8 DataRateLevel; - u8 DataRateChangeEnable; - u8 FragThresholdLevel; - u8 FragThresholdChangeEnable; - - u16 RTSThreshold; - u16 RTSThreshold_Setup; - - u32 AvgIdleSlot; - u32 Pr_Interf; - u32 AvgGapBtwnInterf; - - u8 RTSChangeEnable; - u8 Ant_sel; - u8 aging_timeout; - u8 reserved_2; - - u32 Cnt_Ant[2]; - u32 SQ_Ant[2]; - - u8 FallbackRateLevel; - u8 OfdmRateLevel; - - u8 RatePolicy; - u8 reserved_3[3]; - - /* For RSSI turning */ - s32 RSSI_high; - s32 RSSI_low; -}; - - -#define MTO_DATA() (adapter->sMtoPara) -#define MTO_HAL() (&adapter->sHwData) -#define MTO_SET_PREAMBLE_TYPE(x) /* Turbo mark LM_PREAMBLE_TYPE(&pcore_data->lm_data) = (x) */ -#define MTO_ENABLE (adapter->sLocalPara.TxRateMode == RATE_AUTO) -#define MTO_TXPOWER_FROM_EEPROM (adapter->sHwData.PowerIndexFromEEPROM) -#define LOCAL_ANTENNA_NO() (adapter->sLocalPara.bAntennaNo) -#define LOCAL_IS_CONNECTED() (adapter->sLocalPara.wConnectedSTAindex != 0) -#define MTO_INITTXRATE_MODE (adapter->sHwData.SoftwareSet&0x2) /* bit 1 */ - -#define MTO_POWER_CHANGE_ENABLE() MTO_DATA().PowerChangeEnable -#define MTO_CCA_MODE() MTO_DATA().CCA_Mode -#define MTO_CCA_MODE_SETUP() MTO_DATA().CCA_Mode_Setup -#define MTO_PREAMBLE_TYPE() MTO_DATA().Preamble_Type -#define MTO_PREAMBLE_CHANGE_ENABLE() MTO_DATA().PreambleChangeEnable - -#define MTO_RATE_LEVEL() MTO_DATA().DataRateLevel -#define MTO_OFDM_RATE_LEVEL() MTO_DATA().OfdmRateLevel -#define MTO_RATE_CHANGE_ENABLE() MTO_DATA().DataRateChangeEnable -#define MTO_FRAG_TH_LEVEL() MTO_DATA().FragThresholdLevel -#define MTO_FRAG_CHANGE_ENABLE() MTO_DATA().FragThresholdChangeEnable -#define MTO_RTS_THRESHOLD() MTO_DATA().RTSThreshold -#define MTO_RTS_CHANGE_ENABLE() MTO_DATA().RTSChangeEnable -#define MTO_RTS_THRESHOLD_SETUP() MTO_DATA().RTSThreshold_Setup - -#define MTO_AVG_IDLE_SLOT() MTO_DATA().AvgIdleSlot -#define MTO_PR_INTERF() MTO_DATA().Pr_Interf -#define MTO_AVG_GAP_BTWN_INTERF() MTO_DATA().AvgGapBtwnInterf - -#define MTO_CNT_ANT(x) MTO_DATA().Cnt_Ant[(x)] -#define MTO_SQ_ANT(x) MTO_DATA().SQ_Ant[(x)] -#define MTO_AGING_TIMEOUT() MTO_DATA().aging_timeout - -#define MTO_TXFLOWCOUNT() MTO_DATA().TxFlowCount - -/* --------- DTO threshold parameters ------------- */ -#define MTOPARA_PERIODIC_CHECK_CYCLE() MTO_DATA().DTO_PeriodicCheckCycle -#define MTOPARA_RSSI_TH_FOR_ANTDIV() MTO_DATA().DTO_RssiThForAntDiv -#define MTOPARA_TXCOUNT_TH_FOR_CALC_RATE() MTO_DATA().DTO_TxCountThForCalcNewRate -#define MTOPARA_TXRATE_INC_TH() MTO_DATA().DTO_TxRateIncTh -#define MTOPARA_TXRATE_DEC_TH() MTO_DATA().DTO_TxRateDecTh -#define MTOPARA_TXRATE_EQ_TH() MTO_DATA().DTO_TxRateEqTh -#define MTOPARA_TXRATE_BACKOFF() MTO_DATA().DTO_TxRateBackOff -#define MTOPARA_TXRETRYRATE_REDUCE() MTO_DATA().DTO_TxRetryRateReduce -#define MTOPARA_TXPOWER_INDEX() MTO_DATA().DTO_TxPowerIndex -/* ------------------------------------------------ */ - - -extern u16 MTO_Frag_Th_Tbl[]; - -#define MTO_DATA_RATE() MTO_Data_Rate_Tbl[MTO_RATE_LEVEL()] -#define MTO_FRAG_TH() MTO_Frag_Th_Tbl[MTO_FRAG_TH_LEVEL()] - -void MTO_Init(struct wbsoft_priv *); -void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 t0, u8 index); - -#endif /* __MTO_H__ */ - diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c deleted file mode 100644 index 8aecced..0000000 --- a/drivers/staging/winbond/phy_calibration.c +++ /dev/null @@ -1,1317 +0,0 @@ -/* - * phy_302_calibration.c - * - * Copyright (C) 2002, 2005 Winbond Electronics Corp. - * - * modification history - * --------------------------------------------------------------------------- - * 0.01.001, 2003-04-16, Kevin created - * - */ - -/****************** INCLUDE FILES SECTION ***********************************/ -#include "phy_calibration.h" -#include "wbhal.h" -#include "wb35reg_f.h" -#include "core.h" - - -/****************** DEBUG CONSTANT AND MACRO SECTION ************************/ - -/****************** LOCAL CONSTANT AND MACRO SECTION ************************/ -#define LOOP_TIMES 20 -#define US 1000/* MICROSECOND*/ - -#define AG_CONST 0.6072529350 -#define FIXED(X) ((s32)((X) * 32768.0)) -#define DEG2RAD(X) (0.017453 * (X)) - -static const s32 Angles[] = { - FIXED(DEG2RAD(45.0)), FIXED(DEG2RAD(26.565)), - FIXED(DEG2RAD(14.0362)), FIXED(DEG2RAD(7.12502)), - FIXED(DEG2RAD(3.57633)), FIXED(DEG2RAD(1.78991)), - FIXED(DEG2RAD(0.895174)), FIXED(DEG2RAD(0.447614)), - FIXED(DEG2RAD(0.223811)), FIXED(DEG2RAD(0.111906)), - FIXED(DEG2RAD(0.055953)), FIXED(DEG2RAD(0.027977)) -}; - -/****************** LOCAL FUNCTION DECLARATION SECTION **********************/ - -/* - * void _phy_rf_write_delay(struct hw_data *phw_data); - * void phy_init_rf(struct hw_data *phw_data); - */ - -/****************** FUNCTION DEFINITION SECTION *****************************/ - -static s32 _s13_to_s32(u32 data) -{ - u32 val; - - val = (data & 0x0FFF); - - if ((data & BIT(12)) != 0) - val |= 0xFFFFF000; - - return (s32) val; -} - -/****************************************************************************/ -static s32 _s4_to_s32(u32 data) -{ - s32 val; - - val = (data & 0x0007); - - if ((data & BIT(3)) != 0) - val |= 0xFFFFFFF8; - - return val; -} - -static u32 _s32_to_s4(s32 data) -{ - u32 val; - - if (data > 7) - data = 7; - else if (data < -8) - data = -8; - - val = data & 0x000F; - - return val; -} - -/****************************************************************************/ -static s32 _s5_to_s32(u32 data) -{ - s32 val; - - val = (data & 0x000F); - - if ((data & BIT(4)) != 0) - val |= 0xFFFFFFF0; - - return val; -} - -static u32 _s32_to_s5(s32 data) -{ - u32 val; - - if (data > 15) - data = 15; - else if (data < -16) - data = -16; - - val = data & 0x001F; - - return val; -} - -/****************************************************************************/ -static s32 _s6_to_s32(u32 data) -{ - s32 val; - - val = (data & 0x001F); - - if ((data & BIT(5)) != 0) - val |= 0xFFFFFFE0; - - return val; -} - -static u32 _s32_to_s6(s32 data) -{ - u32 val; - - if (data > 31) - data = 31; - else if (data < -32) - data = -32; - - val = data & 0x003F; - - return val; -} - -/****************************************************************************/ -static s32 _floor(s32 n) -{ - if (n > 0) - n += 5; - else - n -= 5; - - return n/10; -} - -/****************************************************************************/ -/* - * The following code is sqare-root function. - * sqsum is the input and the output is sq_rt; - * The maximum of sqsum = 2^27 -1; - */ -static u32 _sqrt(u32 sqsum) -{ - u32 sq_rt; - - int g0, g1, g2, g3, g4; - int seed; - int next; - int step; - - g4 = sqsum / 100000000; - g3 = (sqsum - g4*100000000) / 1000000; - g2 = (sqsum - g4*100000000 - g3*1000000) / 10000; - g1 = (sqsum - g4*100000000 - g3*1000000 - g2*10000) / 100; - g0 = (sqsum - g4*100000000 - g3*1000000 - g2*10000 - g1*100); - - next = g4; - step = 0; - seed = 0; - while (((seed+1)*(step+1)) <= next) { - step++; - seed++; - } - - sq_rt = seed * 10000; - next = (next-(seed*step))*100 + g3; - - step = 0; - seed = 2 * seed * 10; - while (((seed+1)*(step+1)) <= next) { - step++; - seed++; - } - - sq_rt = sq_rt + step * 1000; - next = (next - seed * step) * 100 + g2; - seed = (seed + step) * 10; - step = 0; - while (((seed+1)*(step+1)) <= next) { - step++; - seed++; - } - - sq_rt = sq_rt + step * 100; - next = (next - seed * step) * 100 + g1; - seed = (seed + step) * 10; - step = 0; - - while (((seed+1)*(step+1)) <= next) { - step++; - seed++; - } - - sq_rt = sq_rt + step * 10; - next = (next - seed * step) * 100 + g0; - seed = (seed + step) * 10; - step = 0; - - while (((seed+1)*(step+1)) <= next) { - step++; - seed++; - } - - sq_rt = sq_rt + step; - - return sq_rt; -} - -/****************************************************************************/ -static void _sin_cos(s32 angle, s32 *sin, s32 *cos) -{ - s32 X, Y, TargetAngle, CurrAngle; - unsigned Step; - - X = FIXED(AG_CONST); /* AG_CONST * cos(0) */ - Y = 0; /* AG_CONST * sin(0) */ - TargetAngle = abs(angle); - CurrAngle = 0; - - for (Step = 0; Step < 12; Step++) { - s32 NewX; - - if (TargetAngle > CurrAngle) { - NewX = X - (Y >> Step); - Y = (X >> Step) + Y; - X = NewX; - CurrAngle += Angles[Step]; - } else { - NewX = X + (Y >> Step); - Y = -(X >> Step) + Y; - X = NewX; - CurrAngle -= Angles[Step]; - } - } - - if (angle > 0) { - *cos = X; - *sin = Y; - } else { - *cos = X; - *sin = -Y; - } -} - -static unsigned char hal_get_dxx_reg(struct hw_data *pHwData, u16 number, - u32 *pValue) -{ - if (number < 0x1000) - number += 0x1000; - return Wb35Reg_ReadSync(pHwData, number, pValue); -} -#define hw_get_dxx_reg(_A, _B, _C) hal_get_dxx_reg(_A, _B, (u32 *)_C) - -static unsigned char hal_set_dxx_reg(struct hw_data *pHwData, u16 number, - u32 value) -{ - unsigned char ret; - - if (number < 0x1000) - number += 0x1000; - ret = Wb35Reg_WriteSync(pHwData, number, value); - return ret; -} -#define hw_set_dxx_reg(_A, _B, _C) hal_set_dxx_reg(_A, _B, (u32)_C) - - -static void _reset_rx_cal(struct hw_data *phw_data) -{ - u32 val; - - hw_get_dxx_reg(phw_data, 0x54, &val); - - if (phw_data->revision == 0x2002) /* 1st-cut */ - val &= 0xFFFF0000; - else /* 2nd-cut */ - val &= 0x000003FF; - - hw_set_dxx_reg(phw_data, 0x54, val); -} - - -/**************for winbond calibration*********/ - - - -/**********************************************/ -static void _rxadc_dc_offset_cancellation_winbond(struct hw_data *phw_data, u32 frequency) -{ - u32 reg_agc_ctrl3; - u32 reg_a_acq_ctrl; - u32 reg_b_acq_ctrl; - u32 val; - - PHY_DEBUG(("[CAL] -> [1]_rxadc_dc_offset_cancellation()\n")); - phy_init_rf(phw_data); - - /* set calibration channel */ - if ((RF_WB_242 == phw_data->phy_type) || - (RF_WB_242_1 == phw_data->phy_type)) /* 20060619.5 Add */{ - if ((frequency >= 2412) && (frequency <= 2484)) { - /* w89rf242 change frequency to 2390Mhz */ - PHY_DEBUG(("[CAL] W89RF242/11G/Channel=2390Mhz\n")); - phy_set_rf_data(phw_data, 3, (3<<24)|0x025586); - - } - } else { - - } - - /* reset cancel_dc_i[9:5] and cancel_dc_q[4:0] in register DC_Cancel */ - hw_get_dxx_reg(phw_data, 0x5C, &val); - val &= ~(0x03FF); - hw_set_dxx_reg(phw_data, 0x5C, val); - - /* reset the TX and RX IQ calibration data */ - hw_set_dxx_reg(phw_data, 0x3C, 0); - hw_set_dxx_reg(phw_data, 0x54, 0); - - hw_set_dxx_reg(phw_data, 0x58, 0x30303030); /* IQ_Alpha Changed */ - - /* a. Disable AGC */ - hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, ®_agc_ctrl3); - reg_agc_ctrl3 &= ~BIT(2); - reg_agc_ctrl3 |= (MASK_LNA_FIX_GAIN|MASK_AGC_FIX); - hw_set_dxx_reg(phw_data, REG_AGC_CTRL3, reg_agc_ctrl3); - - hw_get_dxx_reg(phw_data, REG_AGC_CTRL5, &val); - val |= MASK_AGC_FIX_GAIN; - hw_set_dxx_reg(phw_data, REG_AGC_CTRL5, val); - - /* b. Turn off BB RX */ - hw_get_dxx_reg(phw_data, REG_A_ACQ_CTRL, ®_a_acq_ctrl); - reg_a_acq_ctrl |= MASK_AMER_OFF_REG; - hw_set_dxx_reg(phw_data, REG_A_ACQ_CTRL, reg_a_acq_ctrl); - - hw_get_dxx_reg(phw_data, REG_B_ACQ_CTRL, ®_b_acq_ctrl); - reg_b_acq_ctrl |= MASK_BMER_OFF_REG; - hw_set_dxx_reg(phw_data, REG_B_ACQ_CTRL, reg_b_acq_ctrl); - - /* c. Make sure MAC is in receiving mode - * d. Turn ON ADC calibration - * - ADC calibrator is triggered by this signal rising from 0 to 1 */ - hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val); - val &= ~MASK_ADC_DC_CAL_STR; - hw_set_dxx_reg(phw_data, REG_MODE_CTRL, val); - - val |= MASK_ADC_DC_CAL_STR; - hw_set_dxx_reg(phw_data, REG_MODE_CTRL, val); - - /* e. The results are shown in "adc_dc_cal_i[8:0] and adc_dc_cal_q[8:0]" */ -#ifdef _DEBUG - hw_get_dxx_reg(phw_data, REG_OFFSET_READ, &val); - PHY_DEBUG(("[CAL] REG_OFFSET_READ = 0x%08X\n", val)); - - PHY_DEBUG(("[CAL] ** adc_dc_cal_i = %d (0x%04X)\n", - _s9_to_s32(val&0x000001FF), val&0x000001FF)); - PHY_DEBUG(("[CAL] ** adc_dc_cal_q = %d (0x%04X)\n", - _s9_to_s32((val&0x0003FE00)>>9), - (val&0x0003FE00)>>9)); -#endif - - hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val); - val &= ~MASK_ADC_DC_CAL_STR; - hw_set_dxx_reg(phw_data, REG_MODE_CTRL, val); - - /* f. Turn on BB RX */ - /* hw_get_dxx_reg(phw_data, REG_A_ACQ_CTRL, ®_a_acq_ctrl); */ - reg_a_acq_ctrl &= ~MASK_AMER_OFF_REG; - hw_set_dxx_reg(phw_data, REG_A_ACQ_CTRL, reg_a_acq_ctrl); - - /* hw_get_dxx_reg(phw_data, REG_B_ACQ_CTRL, ®_b_acq_ctrl); */ - reg_b_acq_ctrl &= ~MASK_BMER_OFF_REG; - hw_set_dxx_reg(phw_data, REG_B_ACQ_CTRL, reg_b_acq_ctrl); - - /* g. Enable AGC */ - /* hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &val); */ - reg_agc_ctrl3 |= BIT(2); - reg_agc_ctrl3 &= ~(MASK_LNA_FIX_GAIN|MASK_AGC_FIX); - hw_set_dxx_reg(phw_data, REG_AGC_CTRL3, reg_agc_ctrl3); -} - -/* 20060612.1.a 20060718.1 Modify */ -static u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data, - s32 a_2_threshold, - s32 b_2_threshold) -{ - u32 reg_mode_ctrl; - s32 iq_mag_0_tx; - s32 iqcal_tone_i0; - s32 iqcal_tone_q0; - s32 iqcal_tone_i; - s32 iqcal_tone_q; - u32 sqsum; - s32 rot_i_b; - s32 rot_q_b; - s32 tx_cal_flt_b[4]; - s32 tx_cal[4]; - s32 tx_cal_reg[4]; - s32 a_2, b_2; - s32 sin_b, sin_2b; - s32 cos_b, cos_2b; - s32 divisor; - s32 temp1, temp2; - u32 val; - u16 loop; - s32 iqcal_tone_i_avg, iqcal_tone_q_avg; - u8 verify_count; - int capture_time; - - PHY_DEBUG(("[CAL] -> _tx_iq_calibration_loop()\n")); - PHY_DEBUG(("[CAL] ** a_2_threshold = %d\n", a_2_threshold)); - PHY_DEBUG(("[CAL] ** b_2_threshold = %d\n", b_2_threshold)); - - verify_count = 0; - - hw_get_dxx_reg(phw_data, REG_MODE_CTRL, ®_mode_ctrl); - PHY_DEBUG(("[CAL] MODE_CTRL (read) = 0x%08X\n", reg_mode_ctrl)); - - loop = LOOP_TIMES; - - while (loop > 0) { - PHY_DEBUG(("[CAL] [%d.] <_tx_iq_calibration_loop>\n", - (LOOP_TIMES-loop+1))); - - iqcal_tone_i_avg = 0; - iqcal_tone_q_avg = 0; - if (!hw_set_dxx_reg(phw_data, 0x3C, 0x00)) /* 20060718.1 modify */ - return 0; - for (capture_time = 0; capture_time < 10; capture_time++) { - /* - * a. Set iqcal_mode[1:0] to 0x2 and set "calib_start" - * to 0x1 to enable "IQ calibration Mode II" - */ - reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE); - reg_mode_ctrl &= ~MASK_IQCAL_MODE; - reg_mode_ctrl |= (MASK_CALIB_START|0x02); - reg_mode_ctrl |= (MASK_CALIB_START|0x02|2<<2); - hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl); - PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl)); - - /* b. */ - hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val); - PHY_DEBUG(("[CAL] CALIB_READ1 = 0x%08X\n", val)); - - iqcal_tone_i0 = _s13_to_s32(val & 0x00001FFF); - iqcal_tone_q0 = _s13_to_s32((val & 0x03FFE000) >> 13); - PHY_DEBUG(("[CAL] ** iqcal_tone_i0=%d, iqcal_tone_q0=%d\n", - iqcal_tone_i0, iqcal_tone_q0)); - - sqsum = iqcal_tone_i0*iqcal_tone_i0 + - iqcal_tone_q0*iqcal_tone_q0; - iq_mag_0_tx = (s32) _sqrt(sqsum); - PHY_DEBUG(("[CAL] ** iq_mag_0_tx=%d\n", iq_mag_0_tx)); - - /* c. Set "calib_start" to 0x0 */ - reg_mode_ctrl &= ~MASK_CALIB_START; - hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl); - PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl)); - - /* - * d. Set iqcal_mode[1:0] to 0x3 and set "calib_start" - * to 0x1 to enable "IQ calibration Mode II" - */ - /* hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val); */ - hw_get_dxx_reg(phw_data, REG_MODE_CTRL, ®_mode_ctrl); - reg_mode_ctrl &= ~MASK_IQCAL_MODE; - reg_mode_ctrl |= (MASK_CALIB_START|0x03); - hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl); - PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl)); - - /* e. */ - hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val); - PHY_DEBUG(("[CAL] CALIB_READ1 = 0x%08X\n", val)); - - iqcal_tone_i = _s13_to_s32(val & 0x00001FFF); - iqcal_tone_q = _s13_to_s32((val & 0x03FFE000) >> 13); - PHY_DEBUG(("[CAL] ** iqcal_tone_i = %d, iqcal_tone_q = %d\n", - iqcal_tone_i, iqcal_tone_q)); - if (capture_time == 0) - continue; - else { - iqcal_tone_i_avg = (iqcal_tone_i_avg*(capture_time-1) + iqcal_tone_i)/capture_time; - iqcal_tone_q_avg = (iqcal_tone_q_avg*(capture_time-1) + iqcal_tone_q)/capture_time; - } - } - - iqcal_tone_i = iqcal_tone_i_avg; - iqcal_tone_q = iqcal_tone_q_avg; - - - rot_i_b = (iqcal_tone_i * iqcal_tone_i0 + - iqcal_tone_q * iqcal_tone_q0) / 1024; - rot_q_b = (iqcal_tone_i * iqcal_tone_q0 * (-1) + - iqcal_tone_q * iqcal_tone_i0) / 1024; - PHY_DEBUG(("[CAL] ** rot_i_b = %d, rot_q_b = %d\n", - rot_i_b, rot_q_b)); - - /* f. */ - divisor = ((iq_mag_0_tx * iq_mag_0_tx * 2)/1024 - rot_i_b) * 2; - - if (divisor == 0) { - PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> ERROR *******\n")); - PHY_DEBUG(("[CAL] ** divisor=0 to calculate EPS and THETA !!\n")); - PHY_DEBUG(("[CAL] ******************************************\n")); - break; - } - - a_2 = (rot_i_b * 32768) / divisor; - b_2 = (rot_q_b * (-32768)) / divisor; - PHY_DEBUG(("[CAL] ***** EPSILON/2 = %d\n", a_2)); - PHY_DEBUG(("[CAL] ***** THETA/2 = %d\n", b_2)); - - phw_data->iq_rsdl_gain_tx_d2 = a_2; - phw_data->iq_rsdl_phase_tx_d2 = b_2; - - /* if ((abs(a_2) < 150) && (abs(b_2) < 100)) */ - /* if ((abs(a_2) < 200) && (abs(b_2) < 200)) */ - if ((abs(a_2) < a_2_threshold) && (abs(b_2) < b_2_threshold)) { - verify_count++; - - PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *************\n")); - PHY_DEBUG(("[CAL] ** VERIFY OK # %d !!\n", verify_count)); - PHY_DEBUG(("[CAL] ******************************************\n")); - - if (verify_count > 2) { - PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *********\n")); - PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION (EPS,THETA) OK !!\n")); - PHY_DEBUG(("[CAL] **************************************\n")); - return 0; - } - - continue; - } else - verify_count = 0; - - _sin_cos(b_2, &sin_b, &cos_b); - _sin_cos(b_2*2, &sin_2b, &cos_2b); - PHY_DEBUG(("[CAL] ** sin(b/2)=%d, cos(b/2)=%d\n", sin_b, cos_b)); - PHY_DEBUG(("[CAL] ** sin(b)=%d, cos(b)=%d\n", sin_2b, cos_2b)); - - if (cos_2b == 0) { - PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> ERROR *******\n")); - PHY_DEBUG(("[CAL] ** cos(b)=0 !!\n")); - PHY_DEBUG(("[CAL] ******************************************\n")); - break; - } - - /* 1280 * 32768 = 41943040 */ - temp1 = (41943040/cos_2b)*cos_b; - - /* temp2 = (41943040/cos_2b)*sin_b*(-1); */ - if (phw_data->revision == 0x2002) /* 1st-cut */ - temp2 = (41943040/cos_2b)*sin_b*(-1); - else /* 2nd-cut */ - temp2 = (41943040*4/cos_2b)*sin_b*(-1); - - tx_cal_flt_b[0] = _floor(temp1/(32768+a_2)); - tx_cal_flt_b[1] = _floor(temp2/(32768+a_2)); - tx_cal_flt_b[2] = _floor(temp2/(32768-a_2)); - tx_cal_flt_b[3] = _floor(temp1/(32768-a_2)); - PHY_DEBUG(("[CAL] ** tx_cal_flt_b[0] = %d\n", tx_cal_flt_b[0])); - PHY_DEBUG(("[CAL] tx_cal_flt_b[1] = %d\n", tx_cal_flt_b[1])); - PHY_DEBUG(("[CAL] tx_cal_flt_b[2] = %d\n", tx_cal_flt_b[2])); - PHY_DEBUG(("[CAL] tx_cal_flt_b[3] = %d\n", tx_cal_flt_b[3])); - - tx_cal[2] = tx_cal_flt_b[2]; - tx_cal[2] = tx_cal[2] + 3; - tx_cal[1] = tx_cal[2]; - tx_cal[3] = tx_cal_flt_b[3] - 128; - tx_cal[0] = -tx_cal[3] + 1; - - PHY_DEBUG(("[CAL] tx_cal[0] = %d\n", tx_cal[0])); - PHY_DEBUG(("[CAL] tx_cal[1] = %d\n", tx_cal[1])); - PHY_DEBUG(("[CAL] tx_cal[2] = %d\n", tx_cal[2])); - PHY_DEBUG(("[CAL] tx_cal[3] = %d\n", tx_cal[3])); - - /* if ((tx_cal[0] == 0) && (tx_cal[1] == 0) && - (tx_cal[2] == 0) && (tx_cal[3] == 0)) - { */ - /* PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *************\n")); - * PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION COMPLETE !!\n")); - * PHY_DEBUG(("[CAL] ******************************************\n")); - * return 0; - } */ - - /* g. */ - if (phw_data->revision == 0x2002) /* 1st-cut */{ - hw_get_dxx_reg(phw_data, 0x54, &val); - PHY_DEBUG(("[CAL] ** 0x54 = 0x%08X\n", val)); - tx_cal_reg[0] = _s4_to_s32((val & 0xF0000000) >> 28); - tx_cal_reg[1] = _s4_to_s32((val & 0x0F000000) >> 24); - tx_cal_reg[2] = _s4_to_s32((val & 0x00F00000) >> 20); - tx_cal_reg[3] = _s4_to_s32((val & 0x000F0000) >> 16); - } else /* 2nd-cut */{ - hw_get_dxx_reg(phw_data, 0x3C, &val); - PHY_DEBUG(("[CAL] ** 0x3C = 0x%08X\n", val)); - tx_cal_reg[0] = _s5_to_s32((val & 0xF8000000) >> 27); - tx_cal_reg[1] = _s6_to_s32((val & 0x07E00000) >> 21); - tx_cal_reg[2] = _s6_to_s32((val & 0x001F8000) >> 15); - tx_cal_reg[3] = _s5_to_s32((val & 0x00007C00) >> 10); - - } - - PHY_DEBUG(("[CAL] ** tx_cal_reg[0] = %d\n", tx_cal_reg[0])); - PHY_DEBUG(("[CAL] tx_cal_reg[1] = %d\n", tx_cal_reg[1])); - PHY_DEBUG(("[CAL] tx_cal_reg[2] = %d\n", tx_cal_reg[2])); - PHY_DEBUG(("[CAL] tx_cal_reg[3] = %d\n", tx_cal_reg[3])); - - if (phw_data->revision == 0x2002) /* 1st-cut */{ - if (((tx_cal_reg[0] == 7) || (tx_cal_reg[0] == (-8))) && - ((tx_cal_reg[3] == 7) || (tx_cal_reg[3] == (-8)))) { - PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *********\n")); - PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION SATUATION !!\n")); - PHY_DEBUG(("[CAL] **************************************\n")); - break; - } - } else /* 2nd-cut */{ - if (((tx_cal_reg[0] == 31) || (tx_cal_reg[0] == (-32))) && - ((tx_cal_reg[3] == 31) || (tx_cal_reg[3] == (-32)))) { - PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *********\n")); - PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION SATUATION !!\n")); - PHY_DEBUG(("[CAL] **************************************\n")); - break; - } - } - - tx_cal[0] = tx_cal[0] + tx_cal_reg[0]; - tx_cal[1] = tx_cal[1] + tx_cal_reg[1]; - tx_cal[2] = tx_cal[2] + tx_cal_reg[2]; - tx_cal[3] = tx_cal[3] + tx_cal_reg[3]; - PHY_DEBUG(("[CAL] ** apply tx_cal[0] = %d\n", tx_cal[0])); - PHY_DEBUG(("[CAL] apply tx_cal[1] = %d\n", tx_cal[1])); - PHY_DEBUG(("[CAL] apply tx_cal[2] = %d\n", tx_cal[2])); - PHY_DEBUG(("[CAL] apply tx_cal[3] = %d\n", tx_cal[3])); - - if (phw_data->revision == 0x2002) /* 1st-cut */{ - val &= 0x0000FFFF; - val |= ((_s32_to_s4(tx_cal[0]) << 28)| - (_s32_to_s4(tx_cal[1]) << 24)| - (_s32_to_s4(tx_cal[2]) << 20)| - (_s32_to_s4(tx_cal[3]) << 16)); - hw_set_dxx_reg(phw_data, 0x54, val); - PHY_DEBUG(("[CAL] ** CALIB_DATA = 0x%08X\n", val)); - return 0; - } else /* 2nd-cut */{ - val &= 0x000003FF; - val |= ((_s32_to_s5(tx_cal[0]) << 27)| - (_s32_to_s6(tx_cal[1]) << 21)| - (_s32_to_s6(tx_cal[2]) << 15)| - (_s32_to_s5(tx_cal[3]) << 10)); - hw_set_dxx_reg(phw_data, 0x3C, val); - PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION = 0x%08X\n", val)); - return 0; - } - - /* i. Set "calib_start" to 0x0 */ - reg_mode_ctrl &= ~MASK_CALIB_START; - hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl); - PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl)); - - loop--; - } - - return 1; -} - -static void _tx_iq_calibration_winbond(struct hw_data *phw_data) -{ - u32 reg_agc_ctrl3; -#ifdef _DEBUG - s32 tx_cal_reg[4]; - -#endif - u32 reg_mode_ctrl; - u32 val; - u8 result; - - PHY_DEBUG(("[CAL] -> [4]_tx_iq_calibration()\n")); - - /* 0x01 0xEE3FC2 ; 3B8FF ; Calibration (6a). enable TX IQ calibration loop circuits */ - phy_set_rf_data(phw_data, 1, (1<<24)|0xEE3FC2); - /* 0x0B 0x1905D6 ; 06417 ; Calibration (6b). enable TX I/Q cal loop squaring circuit */ - phy_set_rf_data(phw_data, 11, (11<<24)|0x19BDD6); /* 20060612.1.a 0x1905D6); */ - /* 0x05 0x24C60A ; 09318 ; Calibration (6c). setting TX-VGA gain: TXGCH=2 & GPK=110 --> to be optimized */ - phy_set_rf_data(phw_data, 5, (5<<24)|0x24C60A); /* 0x24C60A (high temperature) */ - /* 0x06 0x06880C ; 01A20 ; Calibration (6d). RXGCH=00; RXGCL=100 000 (RXVGA=32) --> to be optimized */ - phy_set_rf_data(phw_data, 6, (6<<24)|0x34880C); /* 20060612.1.a 0x06890C); */ - /* 0x00 0xFDF1C0 ; 3F7C7 ; Calibration (6e). turn on IQ imbalance/Test mode */ - phy_set_rf_data(phw_data, 0, (0<<24)|0xFDF1C0); - /* ; [BB-chip]: Calibration (6f).Send test pattern */ - /* ; [BB-chip]: Calibration (6g). Search RXGCL optimal value */ - /* ; [BB-chip]: Calibration (6h). Calculate TX-path IQ imbalance and setting TX path IQ compensation table */ - /* phy_set_rf_data(phw_data, 3, (3<<24)|0x025586); */ - - msleep(30); /* 20060612.1.a 30ms delay. Add the follow 2 lines */ - /* To adjust TXVGA to fit iq_mag_0 range from 1250 ~ 1750 */ - adjust_TXVGA_for_iq_mag(phw_data); - - /* a. Disable AGC */ - hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, ®_agc_ctrl3); - reg_agc_ctrl3 &= ~BIT(2); - reg_agc_ctrl3 |= (MASK_LNA_FIX_GAIN|MASK_AGC_FIX); - hw_set_dxx_reg(phw_data, REG_AGC_CTRL3, reg_agc_ctrl3); - - hw_get_dxx_reg(phw_data, REG_AGC_CTRL5, &val); - val |= MASK_AGC_FIX_GAIN; - hw_set_dxx_reg(phw_data, REG_AGC_CTRL5, val); - - result = _tx_iq_calibration_loop_winbond(phw_data, 150, 100); - - if (result > 0) { - if (phw_data->revision == 0x2002) /* 1st-cut */{ - hw_get_dxx_reg(phw_data, 0x54, &val); - val &= 0x0000FFFF; - hw_set_dxx_reg(phw_data, 0x54, val); - } else /* 2nd-cut*/{ - hw_get_dxx_reg(phw_data, 0x3C, &val); - val &= 0x000003FF; - hw_set_dxx_reg(phw_data, 0x3C, val); - } - - result = _tx_iq_calibration_loop_winbond(phw_data, 300, 200); - - if (result > 0) { - if (phw_data->revision == 0x2002) /* 1st-cut */{ - hw_get_dxx_reg(phw_data, 0x54, &val); - val &= 0x0000FFFF; - hw_set_dxx_reg(phw_data, 0x54, val); - } else /* 2nd-cut*/{ - hw_get_dxx_reg(phw_data, 0x3C, &val); - val &= 0x000003FF; - hw_set_dxx_reg(phw_data, 0x3C, val); - } - - result = _tx_iq_calibration_loop_winbond(phw_data, 500, 400); - if (result > 0) { - if (phw_data->revision == 0x2002) /* 1st-cut */{ - hw_get_dxx_reg(phw_data, 0x54, &val); - val &= 0x0000FFFF; - hw_set_dxx_reg(phw_data, 0x54, val); - } else /* 2nd-cut */{ - hw_get_dxx_reg(phw_data, 0x3C, &val); - val &= 0x000003FF; - hw_set_dxx_reg(phw_data, 0x3C, val); - } - - - result = _tx_iq_calibration_loop_winbond(phw_data, 700, 500); - - if (result > 0) { - PHY_DEBUG(("[CAL] ** <_tx_iq_calibration> **************\n")); - PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION FAILURE !!\n")); - PHY_DEBUG(("[CAL] **************************************\n")); - - if (phw_data->revision == 0x2002) /* 1st-cut */{ - hw_get_dxx_reg(phw_data, 0x54, &val); - val &= 0x0000FFFF; - hw_set_dxx_reg(phw_data, 0x54, val); - } else /* 2nd-cut */{ - hw_get_dxx_reg(phw_data, 0x3C, &val); - val &= 0x000003FF; - hw_set_dxx_reg(phw_data, 0x3C, val); - } - } - } - } - } - - /* i. Set "calib_start" to 0x0 */ - hw_get_dxx_reg(phw_data, REG_MODE_CTRL, ®_mode_ctrl); - reg_mode_ctrl &= ~MASK_CALIB_START; - hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl); - PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl)); - - /* g. Enable AGC */ - /* hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &val); */ - reg_agc_ctrl3 |= BIT(2); - reg_agc_ctrl3 &= ~(MASK_LNA_FIX_GAIN|MASK_AGC_FIX); - hw_set_dxx_reg(phw_data, REG_AGC_CTRL3, reg_agc_ctrl3); - -#ifdef _DEBUG - if (phw_data->revision == 0x2002) /* 1st-cut */{ - hw_get_dxx_reg(phw_data, 0x54, &val); - PHY_DEBUG(("[CAL] ** 0x54 = 0x%08X\n", val)); - tx_cal_reg[0] = _s4_to_s32((val & 0xF0000000) >> 28); - tx_cal_reg[1] = _s4_to_s32((val & 0x0F000000) >> 24); - tx_cal_reg[2] = _s4_to_s32((val & 0x00F00000) >> 20); - tx_cal_reg[3] = _s4_to_s32((val & 0x000F0000) >> 16); - } else /* 2nd-cut */ { - hw_get_dxx_reg(phw_data, 0x3C, &val); - PHY_DEBUG(("[CAL] ** 0x3C = 0x%08X\n", val)); - tx_cal_reg[0] = _s5_to_s32((val & 0xF8000000) >> 27); - tx_cal_reg[1] = _s6_to_s32((val & 0x07E00000) >> 21); - tx_cal_reg[2] = _s6_to_s32((val & 0x001F8000) >> 15); - tx_cal_reg[3] = _s5_to_s32((val & 0x00007C00) >> 10); - - } - - PHY_DEBUG(("[CAL] ** tx_cal_reg[0] = %d\n", tx_cal_reg[0])); - PHY_DEBUG(("[CAL] tx_cal_reg[1] = %d\n", tx_cal_reg[1])); - PHY_DEBUG(("[CAL] tx_cal_reg[2] = %d\n", tx_cal_reg[2])); - PHY_DEBUG(("[CAL] tx_cal_reg[3] = %d\n", tx_cal_reg[3])); -#endif - - - /* - * for test - BEN - * RF Control Override - */ -} - -/*****************************************************/ -static u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 frequency) -{ - u32 reg_mode_ctrl; - s32 iqcal_tone_i; - s32 iqcal_tone_q; - s32 iqcal_image_i; - s32 iqcal_image_q; - s32 rot_tone_i_b; - s32 rot_tone_q_b; - s32 rot_image_i_b; - s32 rot_image_q_b; - s32 rx_cal_flt_b[4]; - s32 rx_cal[4]; - s32 rx_cal_reg[4]; - s32 a_2, b_2; - s32 sin_b, sin_2b; - s32 cos_b, cos_2b; - s32 temp1, temp2; - u32 val; - u16 loop; - - u32 pwr_tone; - u32 pwr_image; - u8 verify_count; - - s32 iqcal_tone_i_avg, iqcal_tone_q_avg; - s32 iqcal_image_i_avg, iqcal_image_q_avg; - u16 capture_time; - - PHY_DEBUG(("[CAL] -> [5]_rx_iq_calibration_loop()\n")); - PHY_DEBUG(("[CAL] ** factor = %d\n", factor)); - - hw_set_dxx_reg(phw_data, 0x58, 0x44444444); /* IQ_Alpha */ - - /* b. */ - - hw_get_dxx_reg(phw_data, REG_MODE_CTRL, ®_mode_ctrl); - PHY_DEBUG(("[CAL] MODE_CTRL (read) = 0x%08X\n", reg_mode_ctrl)); - - verify_count = 0; - - /* for (loop = 0; loop < 1; loop++) */ - /* for (loop = 0; loop < LOOP_TIMES; loop++) */ - loop = LOOP_TIMES; - while (loop > 0) { - PHY_DEBUG(("[CAL] [%d.] <_rx_iq_calibration_loop>\n", - (LOOP_TIMES-loop+1))); - iqcal_tone_i_avg = 0; - iqcal_tone_q_avg = 0; - iqcal_image_i_avg = 0; - iqcal_image_q_avg = 0; - capture_time = 0; - - for (capture_time = 0; capture_time < 10; capture_time++) { - /* i. Set "calib_start" to 0x0 */ - reg_mode_ctrl &= ~MASK_CALIB_START; - if (!hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl))/*20060718.1 modify */ - return 0; - PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl)); - - reg_mode_ctrl &= ~MASK_IQCAL_MODE; - reg_mode_ctrl |= (MASK_CALIB_START|0x1); - hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl); - PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl)); - - /* c. */ - hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val); - PHY_DEBUG(("[CAL] CALIB_READ1 = 0x%08X\n", val)); - - iqcal_tone_i = _s13_to_s32(val & 0x00001FFF); - iqcal_tone_q = _s13_to_s32((val & 0x03FFE000) >> 13); - PHY_DEBUG(("[CAL] ** iqcal_tone_i = %d, iqcal_tone_q = %d\n", - iqcal_tone_i, iqcal_tone_q)); - - hw_get_dxx_reg(phw_data, REG_CALIB_READ2, &val); - PHY_DEBUG(("[CAL] CALIB_READ2 = 0x%08X\n", val)); - - iqcal_image_i = _s13_to_s32(val & 0x00001FFF); - iqcal_image_q = _s13_to_s32((val & 0x03FFE000) >> 13); - PHY_DEBUG(("[CAL] ** iqcal_image_i = %d, iqcal_image_q = %d\n", - iqcal_image_i, iqcal_image_q)); - if (capture_time == 0) - continue; - else { - iqcal_image_i_avg = (iqcal_image_i_avg*(capture_time-1) + iqcal_image_i)/capture_time; - iqcal_image_q_avg = (iqcal_image_q_avg*(capture_time-1) + iqcal_image_q)/capture_time; - iqcal_tone_i_avg = (iqcal_tone_i_avg*(capture_time-1) + iqcal_tone_i)/capture_time; - iqcal_tone_q_avg = (iqcal_tone_q_avg*(capture_time-1) + iqcal_tone_q)/capture_time; - } - } - - - iqcal_image_i = iqcal_image_i_avg; - iqcal_image_q = iqcal_image_q_avg; - iqcal_tone_i = iqcal_tone_i_avg; - iqcal_tone_q = iqcal_tone_q_avg; - - /* d. */ - rot_tone_i_b = (iqcal_tone_i * iqcal_tone_i + - iqcal_tone_q * iqcal_tone_q) / 1024; - rot_tone_q_b = (iqcal_tone_i * iqcal_tone_q * (-1) + - iqcal_tone_q * iqcal_tone_i) / 1024; - rot_image_i_b = (iqcal_image_i * iqcal_tone_i - - iqcal_image_q * iqcal_tone_q) / 1024; - rot_image_q_b = (iqcal_image_i * iqcal_tone_q + - iqcal_image_q * iqcal_tone_i) / 1024; - - PHY_DEBUG(("[CAL] ** rot_tone_i_b = %d\n", rot_tone_i_b)); - PHY_DEBUG(("[CAL] ** rot_tone_q_b = %d\n", rot_tone_q_b)); - PHY_DEBUG(("[CAL] ** rot_image_i_b = %d\n", rot_image_i_b)); - PHY_DEBUG(("[CAL] ** rot_image_q_b = %d\n", rot_image_q_b)); - - /* f. */ - if (rot_tone_i_b == 0) { - PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> ERROR *******\n")); - PHY_DEBUG(("[CAL] ** rot_tone_i_b=0 to calculate EPS and THETA !!\n")); - PHY_DEBUG(("[CAL] ******************************************\n")); - break; - } - - a_2 = (rot_image_i_b * 32768) / rot_tone_i_b - - phw_data->iq_rsdl_gain_tx_d2; - b_2 = (rot_image_q_b * 32768) / rot_tone_i_b - - phw_data->iq_rsdl_phase_tx_d2; - - PHY_DEBUG(("[CAL] ** iq_rsdl_gain_tx_d2 = %d\n", - phw_data->iq_rsdl_gain_tx_d2)); - PHY_DEBUG(("[CAL] ** iq_rsdl_phase_tx_d2= %d\n", - phw_data->iq_rsdl_phase_tx_d2)); - PHY_DEBUG(("[CAL] ***** EPSILON/2 = %d\n", a_2)); - PHY_DEBUG(("[CAL] ***** THETA/2 = %d\n", b_2)); - - _sin_cos(b_2, &sin_b, &cos_b); - _sin_cos(b_2*2, &sin_2b, &cos_2b); - PHY_DEBUG(("[CAL] ** sin(b/2)=%d, cos(b/2)=%d\n", sin_b, cos_b)); - PHY_DEBUG(("[CAL] ** sin(b)=%d, cos(b)=%d\n", sin_2b, cos_2b)); - - if (cos_2b == 0) { - PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> ERROR *******\n")); - PHY_DEBUG(("[CAL] ** cos(b)=0 !!\n")); - PHY_DEBUG(("[CAL] ******************************************\n")); - break; - } - - /* 1280 * 32768 = 41943040 */ - temp1 = (41943040/cos_2b)*cos_b; - - /* temp2 = (41943040/cos_2b)*sin_b*(-1); */ - if (phw_data->revision == 0x2002)/* 1st-cut */ - temp2 = (41943040/cos_2b)*sin_b*(-1); - else/* 2nd-cut */ - temp2 = (41943040*4/cos_2b)*sin_b*(-1); - - rx_cal_flt_b[0] = _floor(temp1/(32768+a_2)); - rx_cal_flt_b[1] = _floor(temp2/(32768-a_2)); - rx_cal_flt_b[2] = _floor(temp2/(32768+a_2)); - rx_cal_flt_b[3] = _floor(temp1/(32768-a_2)); - - PHY_DEBUG(("[CAL] ** rx_cal_flt_b[0] = %d\n", rx_cal_flt_b[0])); - PHY_DEBUG(("[CAL] rx_cal_flt_b[1] = %d\n", rx_cal_flt_b[1])); - PHY_DEBUG(("[CAL] rx_cal_flt_b[2] = %d\n", rx_cal_flt_b[2])); - PHY_DEBUG(("[CAL] rx_cal_flt_b[3] = %d\n", rx_cal_flt_b[3])); - - rx_cal[0] = rx_cal_flt_b[0] - 128; - rx_cal[1] = rx_cal_flt_b[1]; - rx_cal[2] = rx_cal_flt_b[2]; - rx_cal[3] = rx_cal_flt_b[3] - 128; - PHY_DEBUG(("[CAL] ** rx_cal[0] = %d\n", rx_cal[0])); - PHY_DEBUG(("[CAL] rx_cal[1] = %d\n", rx_cal[1])); - PHY_DEBUG(("[CAL] rx_cal[2] = %d\n", rx_cal[2])); - PHY_DEBUG(("[CAL] rx_cal[3] = %d\n", rx_cal[3])); - - /* e. */ - pwr_tone = (iqcal_tone_i*iqcal_tone_i + iqcal_tone_q*iqcal_tone_q); - pwr_image = (iqcal_image_i*iqcal_image_i + - iqcal_image_q*iqcal_image_q)*factor; - - PHY_DEBUG(("[CAL] ** pwr_tone = %d\n", pwr_tone)); - PHY_DEBUG(("[CAL] ** pwr_image = %d\n", pwr_image)); - - if (pwr_tone > pwr_image) { - verify_count++; - - PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> *************\n")); - PHY_DEBUG(("[CAL] ** VERIFY OK # %d !!\n", verify_count)); - PHY_DEBUG(("[CAL] ******************************************\n")); - - if (verify_count > 2) { - PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> *********\n")); - PHY_DEBUG(("[CAL] ** RX_IQ_CALIBRATION OK !!\n")); - PHY_DEBUG(("[CAL] **************************************\n")); - return 0; - } - - continue; - } - /* g. */ - hw_get_dxx_reg(phw_data, 0x54, &val); - PHY_DEBUG(("[CAL] ** 0x54 = 0x%08X\n", val)); - - if (phw_data->revision == 0x2002) /* 1st-cut */{ - rx_cal_reg[0] = _s4_to_s32((val & 0x0000F000) >> 12); - rx_cal_reg[1] = _s4_to_s32((val & 0x00000F00) >> 8); - rx_cal_reg[2] = _s4_to_s32((val & 0x000000F0) >> 4); - rx_cal_reg[3] = _s4_to_s32((val & 0x0000000F)); - } else /* 2nd-cut */{ - rx_cal_reg[0] = _s5_to_s32((val & 0xF8000000) >> 27); - rx_cal_reg[1] = _s6_to_s32((val & 0x07E00000) >> 21); - rx_cal_reg[2] = _s6_to_s32((val & 0x001F8000) >> 15); - rx_cal_reg[3] = _s5_to_s32((val & 0x00007C00) >> 10); - } - - PHY_DEBUG(("[CAL] ** rx_cal_reg[0] = %d\n", rx_cal_reg[0])); - PHY_DEBUG(("[CAL] rx_cal_reg[1] = %d\n", rx_cal_reg[1])); - PHY_DEBUG(("[CAL] rx_cal_reg[2] = %d\n", rx_cal_reg[2])); - PHY_DEBUG(("[CAL] rx_cal_reg[3] = %d\n", rx_cal_reg[3])); - - if (phw_data->revision == 0x2002) /* 1st-cut */{ - if (((rx_cal_reg[0] == 7) || (rx_cal_reg[0] == (-8))) && - ((rx_cal_reg[3] == 7) || (rx_cal_reg[3] == (-8)))) { - PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> *********\n")); - PHY_DEBUG(("[CAL] ** RX_IQ_CALIBRATION SATUATION !!\n")); - PHY_DEBUG(("[CAL] **************************************\n")); - break; - } - } else /* 2nd-cut */{ - if (((rx_cal_reg[0] == 31) || (rx_cal_reg[0] == (-32))) && - ((rx_cal_reg[3] == 31) || (rx_cal_reg[3] == (-32)))) { - PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> *********\n")); - PHY_DEBUG(("[CAL] ** RX_IQ_CALIBRATION SATUATION !!\n")); - PHY_DEBUG(("[CAL] **************************************\n")); - break; - } - } - - rx_cal[0] = rx_cal[0] + rx_cal_reg[0]; - rx_cal[1] = rx_cal[1] + rx_cal_reg[1]; - rx_cal[2] = rx_cal[2] + rx_cal_reg[2]; - rx_cal[3] = rx_cal[3] + rx_cal_reg[3]; - PHY_DEBUG(("[CAL] ** apply rx_cal[0] = %d\n", rx_cal[0])); - PHY_DEBUG(("[CAL] apply rx_cal[1] = %d\n", rx_cal[1])); - PHY_DEBUG(("[CAL] apply rx_cal[2] = %d\n", rx_cal[2])); - PHY_DEBUG(("[CAL] apply rx_cal[3] = %d\n", rx_cal[3])); - - hw_get_dxx_reg(phw_data, 0x54, &val); - if (phw_data->revision == 0x2002) /* 1st-cut */{ - val &= 0x0000FFFF; - val |= ((_s32_to_s4(rx_cal[0]) << 12)| - (_s32_to_s4(rx_cal[1]) << 8)| - (_s32_to_s4(rx_cal[2]) << 4)| - (_s32_to_s4(rx_cal[3]))); - hw_set_dxx_reg(phw_data, 0x54, val); - } else /* 2nd-cut */{ - val &= 0x000003FF; - val |= ((_s32_to_s5(rx_cal[0]) << 27)| - (_s32_to_s6(rx_cal[1]) << 21)| - (_s32_to_s6(rx_cal[2]) << 15)| - (_s32_to_s5(rx_cal[3]) << 10)); - hw_set_dxx_reg(phw_data, 0x54, val); - - if (loop == 3) - return 0; - } - PHY_DEBUG(("[CAL] ** CALIB_DATA = 0x%08X\n", val)); - - loop--; - } - - return 1; -} - -/*************************************************/ - -/***************************************************************/ -static void _rx_iq_calibration_winbond(struct hw_data *phw_data, u32 frequency) -{ -/* figo 20050523 marked this flag for can't compile for release */ -#ifdef _DEBUG - s32 rx_cal_reg[4]; - u32 val; -#endif - - u8 result; - - PHY_DEBUG(("[CAL] -> [5]_rx_iq_calibration()\n")); -/* a. Set RFIC to "RX calibration mode" */ - /* ; ----- Calibration (7). RX path IQ imbalance calibration loop */ - /* 0x01 0xFFBFC2 ; 3FEFF ; Calibration (7a). enable RX IQ calibration loop circuits */ - phy_set_rf_data(phw_data, 1, (1<<24)|0xEFBFC2); - /* 0x0B 0x1A01D6 ; 06817 ; Calibration (7b). enable RX I/Q cal loop SW1 circuits */ - phy_set_rf_data(phw_data, 11, (11<<24)|0x1A05D6); - /* 0x05 0x24848A ; 09212 ; Calibration (7c). setting TX-VGA gain (TXGCH) to 2 --> to be optimized */ - phy_set_rf_data(phw_data, 5, (5<<24) | phw_data->txvga_setting_for_cal); - /* 0x06 0x06840C ; 01A10 ; Calibration (7d). RXGCH=00; RXGCL=010 000 (RXVGA) --> to be optimized */ - phy_set_rf_data(phw_data, 6, (6<<24)|0x06834C); - /* 0x00 0xFFF1C0 ; 3F7C7 ; Calibration (7e). turn on IQ imbalance/Test mode */ - phy_set_rf_data(phw_data, 0, (0<<24)|0xFFF1C0); - - /* ; [BB-chip]: Calibration (7f). Send test pattern */ - /* ; [BB-chip]: Calibration (7g). Search RXGCL optimal value */ - /* ; [BB-chip]: Calibration (7h). Calculate RX-path IQ imbalance and setting RX path IQ compensation table */ - - result = _rx_iq_calibration_loop_winbond(phw_data, 12589, frequency); - - if (result > 0) { - _reset_rx_cal(phw_data); - result = _rx_iq_calibration_loop_winbond(phw_data, 7943, frequency); - - if (result > 0) { - _reset_rx_cal(phw_data); - result = _rx_iq_calibration_loop_winbond(phw_data, 5011, frequency); - - if (result > 0) { - PHY_DEBUG(("[CAL] ** <_rx_iq_calibration> **************\n")); - PHY_DEBUG(("[CAL] ** RX_IQ_CALIBRATION FAILURE !!\n")); - PHY_DEBUG(("[CAL] **************************************\n")); - _reset_rx_cal(phw_data); - } - } - } - -#ifdef _DEBUG - hw_get_dxx_reg(phw_data, 0x54, &val); - PHY_DEBUG(("[CAL] ** 0x54 = 0x%08X\n", val)); - - if (phw_data->revision == 0x2002) /* 1st-cut */{ - rx_cal_reg[0] = _s4_to_s32((val & 0x0000F000) >> 12); - rx_cal_reg[1] = _s4_to_s32((val & 0x00000F00) >> 8); - rx_cal_reg[2] = _s4_to_s32((val & 0x000000F0) >> 4); - rx_cal_reg[3] = _s4_to_s32((val & 0x0000000F)); - } else /* 2nd-cut */{ - rx_cal_reg[0] = _s5_to_s32((val & 0xF8000000) >> 27); - rx_cal_reg[1] = _s6_to_s32((val & 0x07E00000) >> 21); - rx_cal_reg[2] = _s6_to_s32((val & 0x001F8000) >> 15); - rx_cal_reg[3] = _s5_to_s32((val & 0x00007C00) >> 10); - } - - PHY_DEBUG(("[CAL] ** rx_cal_reg[0] = %d\n", rx_cal_reg[0])); - PHY_DEBUG(("[CAL] rx_cal_reg[1] = %d\n", rx_cal_reg[1])); - PHY_DEBUG(("[CAL] rx_cal_reg[2] = %d\n", rx_cal_reg[2])); - PHY_DEBUG(("[CAL] rx_cal_reg[3] = %d\n", rx_cal_reg[3])); -#endif - -} - -/*******************************************************/ -void phy_calibration_winbond(struct hw_data *phw_data, u32 frequency) -{ - u32 reg_mode_ctrl; - u32 iq_alpha; - - PHY_DEBUG(("[CAL] -> phy_calibration_winbond()\n")); - - hw_get_dxx_reg(phw_data, 0x58, &iq_alpha); - - _rxadc_dc_offset_cancellation_winbond(phw_data, frequency); - /* _txidac_dc_offset_cancellation_winbond(phw_data); */ - /* _txqdac_dc_offset_cancellation_winbond(phw_data); */ - - _tx_iq_calibration_winbond(phw_data); - _rx_iq_calibration_winbond(phw_data, frequency); - - /*********************************************************************/ - hw_get_dxx_reg(phw_data, REG_MODE_CTRL, ®_mode_ctrl); - reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE|MASK_CALIB_START); /* set when finish */ - hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl); - PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl)); - - /* i. Set RFIC to "Normal mode" */ - hw_set_dxx_reg(phw_data, 0x58, iq_alpha); - - /*********************************************************************/ - phy_init_rf(phw_data); - -} - -/******************/ -void phy_set_rf_data(struct hw_data *pHwData, u32 index, u32 value) -{ - u32 ltmp = 0; - - switch (pHwData->phy_type) { - case RF_MAXIM_2825: - case RF_MAXIM_V1: /* 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331) */ - ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(value, 18); - break; - - case RF_MAXIM_2827: - ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(value, 18); - break; - - case RF_MAXIM_2828: - ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(value, 18); - break; - - case RF_MAXIM_2829: - ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(value, 18); - break; - - case RF_AIROHA_2230: - case RF_AIROHA_2230S: /* 20060420 Add this */ - ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(value, 20); - break; - - case RF_AIROHA_7230: - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | (value&0xffffff); - break; - - case RF_WB_242: - case RF_WB_242_1:/* 20060619.5 Add */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(value, 24); - break; - } - - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); -} - -/* 20060717 modify as Bruce's mail */ -unsigned char adjust_TXVGA_for_iq_mag(struct hw_data *phw_data) -{ - int init_txvga = 0; - u32 reg_mode_ctrl; - u32 val; - s32 iqcal_tone_i0; - s32 iqcal_tone_q0; - u32 sqsum; - s32 iq_mag_0_tx; - u8 reg_state; - int current_txvga; - - - reg_state = 0; - for (init_txvga = 0; init_txvga < 10; init_txvga++) { - current_txvga = (0x24C40A|(init_txvga<<6)); - phy_set_rf_data(phw_data, 5, ((5<<24)|current_txvga)); - phw_data->txvga_setting_for_cal = current_txvga; - - msleep(30);/* 20060612.1.a */ - - if (!hw_get_dxx_reg(phw_data, REG_MODE_CTRL, ®_mode_ctrl))/* 20060718.1 modify */ - return false; - - PHY_DEBUG(("[CAL] MODE_CTRL (read) = 0x%08X\n", reg_mode_ctrl)); - - /* - * a. Set iqcal_mode[1:0] to 0x2 and set "calib_start" to 0x1 to - * enable "IQ alibration Mode II" - */ - reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE); - reg_mode_ctrl &= ~MASK_IQCAL_MODE; - reg_mode_ctrl |= (MASK_CALIB_START|0x02); - reg_mode_ctrl |= (MASK_CALIB_START|0x02|2<<2); - hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl); - PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl)); - - udelay(1);/* 20060612.1.a */ - - udelay(300);/* 20060612.1.a */ - - /* b. */ - hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val); - - PHY_DEBUG(("[CAL] CALIB_READ1 = 0x%08X\n", val)); - udelay(300);/* 20060612.1.a */ - - iqcal_tone_i0 = _s13_to_s32(val & 0x00001FFF); - iqcal_tone_q0 = _s13_to_s32((val & 0x03FFE000) >> 13); - PHY_DEBUG(("[CAL] ** iqcal_tone_i0=%d, iqcal_tone_q0=%d\n", - iqcal_tone_i0, iqcal_tone_q0)); - - sqsum = iqcal_tone_i0*iqcal_tone_i0 + iqcal_tone_q0*iqcal_tone_q0; - iq_mag_0_tx = (s32) _sqrt(sqsum); - PHY_DEBUG(("[CAL] ** auto_adjust_txvga_for_iq_mag_0_tx=%d\n", - iq_mag_0_tx)); - - if (iq_mag_0_tx >= 700 && iq_mag_0_tx <= 1750) - break; - else if (iq_mag_0_tx > 1750) { - init_txvga = -2; - continue; - } else - continue; - - } - - if (iq_mag_0_tx >= 700 && iq_mag_0_tx <= 1750) - return true; - else - return false; -} diff --git a/drivers/staging/winbond/phy_calibration.h b/drivers/staging/winbond/phy_calibration.h deleted file mode 100644 index 78fc680..0000000 --- a/drivers/staging/winbond/phy_calibration.h +++ /dev/null @@ -1,85 +0,0 @@ -#ifndef __WINBOND_PHY_CALIBRATION_H -#define __WINBOND_PHY_CALIBRATION_H - -#include "wbhal.h" - -#define REG_AGC_CTRL1 0x1000 -#define REG_AGC_CTRL2 0x1004 -#define REG_AGC_CTRL3 0x1008 -#define REG_AGC_CTRL4 0x100C -#define REG_AGC_CTRL5 0x1010 -#define REG_AGC_CTRL6 0x1014 -#define REG_AGC_CTRL7 0x1018 -#define REG_AGC_CTRL8 0x101C -#define REG_AGC_CTRL9 0x1020 -#define REG_AGC_CTRL10 0x1024 -#define REG_CCA_CTRL 0x1028 -#define REG_A_ACQ_CTRL 0x102C -#define REG_B_ACQ_CTRL 0x1030 -#define REG_A_TXRX_CTRL 0x1034 -#define REG_B_TXRX_CTRL 0x1038 -#define REG_A_TX_COEF3 0x103C -#define REG_A_TX_COEF2 0x1040 -#define REG_A_TX_COEF1 0x1044 -#define REG_B_TX_COEF2 0x1048 -#define REG_B_TX_COEF1 0x104C -#define REG_MODE_CTRL 0x1050 -#define REG_CALIB_DATA 0x1054 -#define REG_IQ_ALPHA 0x1058 -#define REG_DC_CANCEL 0x105C -#define REG_WTO_READ 0x1060 -#define REG_OFFSET_READ 0x1064 -#define REG_CALIB_READ1 0x1068 -#define REG_CALIB_READ2 0x106C -#define REG_A_FREQ_EST 0x1070 - - -#define MASK_AMER_OFF_REG BIT(31) - -#define MASK_BMER_OFF_REG BIT(31) - -#define MASK_LNA_FIX_GAIN (BIT(3) | BIT(4)) -#define MASK_AGC_FIX BIT(1) - -#define MASK_AGC_FIX_GAIN 0xFF00 - -#define MASK_ADC_DC_CAL_STR BIT(10) -#define MASK_CALIB_START BIT(4) -#define MASK_IQCAL_TONE_SEL (BIT(3) | BIT(2)) -#define MASK_IQCAL_MODE (BIT(1) | BIT(0)) - -#define MASK_TX_CAL_0 0xF0000000 -#define TX_CAL_0_SHIFT 28 -#define MASK_TX_CAL_1 0x0F000000 -#define TX_CAL_1_SHIFT 24 -#define MASK_TX_CAL_2 0x00F00000 -#define TX_CAL_2_SHIFT 20 -#define MASK_TX_CAL_3 0x000F0000 -#define TX_CAL_3_SHIFT 16 -#define MASK_RX_CAL_0 0x0000F000 -#define RX_CAL_0_SHIFT 12 -#define MASK_RX_CAL_1 0x00000F00 -#define RX_CAL_1_SHIFT 8 -#define MASK_RX_CAL_2 0x000000F0 -#define RX_CAL_2_SHIFT 4 -#define MASK_RX_CAL_3 0x0000000F -#define RX_CAL_3_SHIFT 0 - -#define MASK_CANCEL_DC_I 0x3E0 -#define CANCEL_DC_I_SHIFT 5 -#define MASK_CANCEL_DC_Q 0x01F -#define CANCEL_DC_Q_SHIFT 0 - -#define MASK_ADC_DC_CAL_I(x) (((x) & 0x0003FE00) >> 9) -#define MASK_ADC_DC_CAL_Q(x) ((x) & 0x000001FF) - -#define MASK_IQCAL_TONE_I 0x00001FFF -#define SHIFT_IQCAL_TONE_I(x) ((x) >> 0) -#define MASK_IQCAL_TONE_Q 0x03FFE000 -#define SHIFT_IQCAL_TONE_Q(x) ((x) >> 13) - -void phy_set_rf_data(struct hw_data *pHwData, u32 index, u32 value); -void phy_calibration_winbond(struct hw_data *phw_data, u32 frequency); -#define phy_init_rf(_A) /* RFSynthesizer_initial(_A) */ - -#endif diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c deleted file mode 100644 index 5fd4c4a..0000000 --- a/drivers/staging/winbond/reg.c +++ /dev/null @@ -1,2328 +0,0 @@ -#include "wbhal.h" -#include "wb35reg_f.h" -#include "core.h" - -/* - * ==================================================== - * Original Phy.h - * ==================================================== - */ - -/* - * ==================================================== - * For MAXIM2825/6/7 Ver. 331 or more - * - * 0x00 0x000a2 - * 0x01 0x21cc0 - * 0x02 0x13802 - * 0x02 0x1383a - * - * channe1 01 ; 0x03 0x30142 ; 0x04 0x0b333; - * channe1 02 ; 0x03 0x32141 ; 0x04 0x08444; - * channe1 03 ; 0x03 0x32143 ; 0x04 0x0aeee; - * channe1 04 ; 0x03 0x32142 ; 0x04 0x0b333; - * channe1 05 ; 0x03 0x31141 ; 0x04 0x08444; - * channe1 06 ; 0x03 0x31143 ; 0x04 0x0aeee; - * channe1 07 ; 0x03 0x31142 ; 0x04 0x0b333; - * channe1 08 ; 0x03 0x33141 ; 0x04 0x08444; - * channe1 09 ; 0x03 0x33143 ; 0x04 0x0aeee; - * channe1 10 ; 0x03 0x33142 ; 0x04 0x0b333; - * channe1 11 ; 0x03 0x30941 ; 0x04 0x08444; - * channe1 12 ; 0x03 0x30943 ; 0x04 0x0aeee; - * channe1 13 ; 0x03 0x30942 ; 0x04 0x0b333; - * - * 0x05 0x28986 - * 0x06 0x18008 - * 0x07 0x38400 - * 0x08 0x05100; 100 Hz DC - * 0x08 0x05900; 30 KHz DC - * 0x09 0x24f08 - * 0x0a 0x17e00, 0x17ea0 - * 0x0b 0x37d80 - * 0x0c 0x0c900 -- 0x0ca00 (lager power 9db than 0x0c000), 0x0c000 - */ - -/* MAX2825 (pure b/g) */ -static u32 max2825_rf_data[] = { - (0x00<<18) | 0x000a2, - (0x01<<18) | 0x21cc0, - (0x02<<18) | 0x13806, - (0x03<<18) | 0x30142, - (0x04<<18) | 0x0b333, - (0x05<<18) | 0x289A6, - (0x06<<18) | 0x18008, - (0x07<<18) | 0x38000, - (0x08<<18) | 0x05100, - (0x09<<18) | 0x24f08, - (0x0A<<18) | 0x14000, - (0x0B<<18) | 0x37d80, - (0x0C<<18) | 0x0c100 /* 11a: 0x0c300, 11g: 0x0c100 */ -}; - -static u32 max2825_channel_data_24[][3] = { - {(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 01 */ - {(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 02 */ - {(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 03 */ - {(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 04 */ - {(0x03 << 18) | 0x31141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 05 */ - {(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 06 */ - {(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 07 */ - {(0x03 << 18) | 0x33141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 08 */ - {(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 09 */ - {(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 10 */ - {(0x03 << 18) | 0x30941, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 11 */ - {(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 12 */ - {(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 13 */ - {(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6} /* channel 14 (2484MHz) */ -}; - -static u32 max2825_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100}; - -/* ========================================== */ -/* MAX2827 (a/b/g) */ -static u32 max2827_rf_data[] = { - (0x00 << 18) | 0x000a2, - (0x01 << 18) | 0x21cc0, - (0x02 << 18) | 0x13806, - (0x03 << 18) | 0x30142, - (0x04 << 18) | 0x0b333, - (0x05 << 18) | 0x289A6, - (0x06 << 18) | 0x18008, - (0x07 << 18) | 0x38000, - (0x08 << 18) | 0x05100, - (0x09 << 18) | 0x24f08, - (0x0A << 18) | 0x14000, - (0x0B << 18) | 0x37d80, - (0x0C << 18) | 0x0c100 /* 11a: 0x0c300, 11g: 0x0c100 */ -}; - -static u32 max2827_channel_data_24[][3] = { - {(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 01 */ - {(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 02 */ - {(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 03 */ - {(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 04 */ - {(0x03 << 18) | 0x31141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 05 */ - {(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 06 */ - {(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 07 */ - {(0x03 << 18) | 0x33141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 08 */ - {(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 09 */ - {(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 10 */ - {(0x03 << 18) | 0x30941, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 11 */ - {(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 12 */ - {(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 13 */ - {(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6} /* channel 14 (2484MHz) */ -}; - -static u32 max2827_channel_data_50[][3] = { - {(0x03 << 18) | 0x33cc3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x2A9A6}, /* channel 36 */ - {(0x03 << 18) | 0x302c0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2A9A6}, /* channel 40 */ - {(0x03 << 18) | 0x302c2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2A9A6}, /* channel 44 */ - {(0x03 << 18) | 0x322c1, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x2A9A6}, /* channel 48 */ - {(0x03 << 18) | 0x312c1, (0x04 << 18) | 0x0a666, (0x05 << 18) | 0x2A9A6}, /* channel 52 */ - {(0x03 << 18) | 0x332c3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x2A9A6}, /* channel 56 */ - {(0x03 << 18) | 0x30ac0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2A9A6}, /* channel 60 */ - {(0x03 << 18) | 0x30ac2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2A9A6} /* channel 64 */ -}; - -static u32 max2827_power_data_24[] = {(0x0C << 18) | 0x0C000, (0x0C << 18) | 0x0D600, (0x0C << 18) | 0x0C100}; -static u32 max2827_power_data_50[] = {(0x0C << 18) | 0x0C400, (0x0C << 18) | 0x0D500, (0x0C << 18) | 0x0C300}; - -/* ======================================================= */ -/* MAX2828 (a/b/g) */ -static u32 max2828_rf_data[] = { - (0x00 << 18) | 0x000a2, - (0x01 << 18) | 0x21cc0, - (0x02 << 18) | 0x13806, - (0x03 << 18) | 0x30142, - (0x04 << 18) | 0x0b333, - (0x05 << 18) | 0x289A6, - (0x06 << 18) | 0x18008, - (0x07 << 18) | 0x38000, - (0x08 << 18) | 0x05100, - (0x09 << 18) | 0x24f08, - (0x0A << 18) | 0x14000, - (0x0B << 18) | 0x37d80, - (0x0C << 18) | 0x0c100 /* 11a: 0x0c300, 11g: 0x0c100 */ -}; - -static u32 max2828_channel_data_24[][3] = { - {(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 01 */ - {(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 02 */ - {(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 03 */ - {(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 04 */ - {(0x03 << 18) | 0x31141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 05 */ - {(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 06 */ - {(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 07 */ - {(0x03 << 18) | 0x33141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 08 */ - {(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 09 */ - {(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 10 */ - {(0x03 << 18) | 0x30941, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 11 */ - {(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 12 */ - {(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 13 */ - {(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6} /* channel 14 (2484MHz) */ -}; - -static u32 max2828_channel_data_50[][3] = { - {(0x03 << 18) | 0x33cc3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x289A6}, /* channel 36 */ - {(0x03 << 18) | 0x302c0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x289A6}, /* channel 40 */ - {(0x03 << 18) | 0x302c2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 44 */ - {(0x03 << 18) | 0x322c1, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6}, /* channel 48 */ - {(0x03 << 18) | 0x312c1, (0x04 << 18) | 0x0a666, (0x05 << 18) | 0x289A6}, /* channel 52 */ - {(0x03 << 18) | 0x332c3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x289A6}, /* channel 56 */ - {(0x03 << 18) | 0x30ac0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x289A6}, /* channel 60 */ - {(0x03 << 18) | 0x30ac2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6} /* channel 64 */ -}; - -static u32 max2828_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100}; -static u32 max2828_power_data_50[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100}; - -/* ========================================================== */ -/* MAX2829 (a/b/g) */ -static u32 max2829_rf_data[] = { - (0x00 << 18) | 0x000a2, - (0x01 << 18) | 0x23520, - (0x02 << 18) | 0x13802, - (0x03 << 18) | 0x30142, - (0x04 << 18) | 0x0b333, - (0x05 << 18) | 0x28906, - (0x06 << 18) | 0x18008, - (0x07 << 18) | 0x3B500, - (0x08 << 18) | 0x05100, - (0x09 << 18) | 0x24f08, - (0x0A << 18) | 0x14000, - (0x0B << 18) | 0x37d80, - (0x0C << 18) | 0x0F300 /* TXVGA=51, (MAX-6 dB) */ -}; - -static u32 max2829_channel_data_24[][3] = { - {(3 << 18) | 0x30142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 01 (2412MHz) */ - {(3 << 18) | 0x32141, (4 << 18) | 0x08444, (5 << 18) | 0x289C6}, /* 02 (2417MHz) */ - {(3 << 18) | 0x32143, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6}, /* 03 (2422MHz) */ - {(3 << 18) | 0x32142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 04 (2427MHz) */ - {(3 << 18) | 0x31141, (4 << 18) | 0x08444, (5 << 18) | 0x289C6}, /* 05 (2432MHz) */ - {(3 << 18) | 0x31143, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6}, /* 06 (2437MHz) */ - {(3 << 18) | 0x31142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 07 (2442MHz) */ - {(3 << 18) | 0x33141, (4 << 18) | 0x08444, (5 << 18) | 0x289C6}, /* 08 (2447MHz) */ - {(3 << 18) | 0x33143, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6}, /* 09 (2452MHz) */ - {(3 << 18) | 0x33142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 10 (2457MHz) */ - {(3 << 18) | 0x30941, (4 << 18) | 0x08444, (5 << 18) | 0x289C6}, /* 11 (2462MHz) */ - {(3 << 18) | 0x30943, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6}, /* 12 (2467MHz) */ - {(3 << 18) | 0x30942, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 13 (2472MHz) */ - {(3 << 18) | 0x32941, (4 << 18) | 0x09999, (5 << 18) | 0x289C6}, /* 14 (2484MHz) */ -}; - -static u32 max2829_channel_data_50[][4] = { - {36, (3 << 18) | 0x33cc3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 36 (5.180GHz) */ - {40, (3 << 18) | 0x302c0, (4 << 18) | 0x08000, (5 << 18) | 0x2A946}, /* 40 (5.200GHz) */ - {44, (3 << 18) | 0x302c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 44 (5.220GHz) */ - {48, (3 << 18) | 0x322c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /* 48 (5.240GHz) */ - {52, (3 << 18) | 0x312c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /* 52 (5.260GHz) */ - {56, (3 << 18) | 0x332c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 56 (5.280GHz) */ - {60, (3 << 18) | 0x30ac0, (4 << 18) | 0x08000, (5 << 18) | 0x2A946}, /* 60 (5.300GHz) */ - {64, (3 << 18) | 0x30ac2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 64 (5.320GHz) */ - - {100, (3 << 18) | 0x30ec0, (4 << 18) | 0x08000, (5 << 18) | 0x2A9C6}, /* 100 (5.500GHz) */ - {104, (3 << 18) | 0x30ec2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A9C6}, /* 104 (5.520GHz) */ - {108, (3 << 18) | 0x32ec1, (4 << 18) | 0x09999, (5 << 18) | 0x2A9C6}, /* 108 (5.540GHz) */ - {112, (3 << 18) | 0x31ec1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A9C6}, /* 112 (5.560GHz) */ - {116, (3 << 18) | 0x33ec3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A9C6}, /* 116 (5.580GHz) */ - {120, (3 << 18) | 0x301c0, (4 << 18) | 0x08000, (5 << 18) | 0x2A9C6}, /* 120 (5.600GHz) */ - {124, (3 << 18) | 0x301c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A9C6}, /* 124 (5.620GHz) */ - {128, (3 << 18) | 0x321c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A9C6}, /* 128 (5.640GHz) */ - {132, (3 << 18) | 0x311c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A9C6}, /* 132 (5.660GHz) */ - {136, (3 << 18) | 0x331c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A9C6}, /* 136 (5.680GHz) */ - {140, (3 << 18) | 0x309c0, (4 << 18) | 0x08000, (5 << 18) | 0x2A9C6}, /* 140 (5.700GHz) */ - - {149, (3 << 18) | 0x329c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A9C6}, /* 149 (5.745GHz) */ - {153, (3 << 18) | 0x319c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A9C6}, /* 153 (5.765GHz) */ - {157, (3 << 18) | 0x339c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A9C6}, /* 157 (5.785GHz) */ - {161, (3 << 18) | 0x305c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A9C6}, /* 161 (5.805GHz) */ - - /* Japan */ - { 184, (3 << 18) | 0x308c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 184 (4.920GHz) */ - { 188, (3 << 18) | 0x328c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /* 188 (4.940GHz) */ - { 192, (3 << 18) | 0x318c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /* 192 (4.960GHz) */ - { 196, (3 << 18) | 0x338c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 196 (4.980GHz) */ - { 8, (3 << 18) | 0x324c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /* 8 (5.040GHz) */ - { 12, (3 << 18) | 0x314c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /* 12 (5.060GHz) */ - { 16, (3 << 18) | 0x334c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 16 (5.080GHz) */ - { 34, (3 << 18) | 0x31cc2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 34 (5.170GHz) */ - { 38, (3 << 18) | 0x33cc1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /* 38 (5.190GHz) */ - { 42, (3 << 18) | 0x302c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /* 42 (5.210GHz) */ - { 46, (3 << 18) | 0x322c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 46 (5.230GHz) */ -}; - -/* - * ==================================================================== - * For MAXIM2825/6/7 Ver. 317 or less - * - * 0x00 0x00080 - * 0x01 0x214c0 - * 0x02 0x13802 - * - * 2.4GHz Channels - * channe1 01 (2.412GHz); 0x03 0x30143 ;0x04 0x0accc - * channe1 02 (2.417GHz); 0x03 0x32140 ;0x04 0x09111 - * channe1 03 (2.422GHz); 0x03 0x32142 ;0x04 0x0bbbb - * channe1 04 (2.427GHz); 0x03 0x32143 ;0x04 0x0accc - * channe1 05 (2.432GHz); 0x03 0x31140 ;0x04 0x09111 - * channe1 06 (2.437GHz); 0x03 0x31142 ;0x04 0x0bbbb - * channe1 07 (2.442GHz); 0x03 0x31143 ;0x04 0x0accc - * channe1 08 (2.447GHz); 0x03 0x33140 ;0x04 0x09111 - * channe1 09 (2.452GHz); 0x03 0x33142 ;0x04 0x0bbbb - * channe1 10 (2.457GHz); 0x03 0x33143 ;0x04 0x0accc - * channe1 11 (2.462GHz); 0x03 0x30940 ;0x04 0x09111 - * channe1 12 (2.467GHz); 0x03 0x30942 ;0x04 0x0bbbb - * channe1 13 (2.472GHz); 0x03 0x30943 ;0x04 0x0accc - * - * 5.0Ghz Channels - * channel 36 (5.180GHz); 0x03 0x33cc0 ;0x04 0x0b333 - * channel 40 (5.200GHz); 0x03 0x302c0 ;0x04 0x08000 - * channel 44 (5.220GHz); 0x03 0x302c2 ;0x04 0x0b333 - * channel 48 (5.240GHz); 0x03 0x322c1 ;0x04 0x09999 - * channel 52 (5.260GHz); 0x03 0x312c1 ;0x04 0x0a666 - * channel 56 (5.280GHz); 0x03 0x332c3 ;0x04 0x08ccc - * channel 60 (5.300GHz); 0x03 0x30ac0 ;0x04 0x08000 - * channel 64 (5.320GHz); 0x03 0x30ac2 ;0x04 0x08333 - * - * 2.4GHz band ; 0x05 0x28986; - * 5.0GHz band ; 0x05 0x2a986 - * 0x06 0x18008 - * 0x07 0x38400 - * 0x08 0x05108 - * 0x09 0x27ff8 - * 0x0a 0x14000 - * 0x0b 0x37f99 - * 0x0c 0x0c000 - * ==================================================================== - */ - -/* - * =================================================================== - * AL2230 MP (Mass Production Version) - * RF Registers Setting for Airoha AL2230 silicon after June 1st, 2004 - * 20-bit length and LSB first - * - * Ch01 (2412MHz) ;0x00 0x09EFC ;0x01 0x8CCCC; - * Ch02 (2417MHz) ;0x00 0x09EFC ;0x01 0x8CCCD; - * Ch03 (2422MHz) ;0x00 0x09E7C ;0x01 0x8CCCC; - * Ch04 (2427MHz) ;0x00 0x09E7C ;0x01 0x8CCCD; - * Ch05 (2432MHz) ;0x00 0x05EFC ;0x01 0x8CCCC; - * Ch06 (2437MHz) ;0x00 0x05EFC ;0x01 0x8CCCD; - * Ch07 (2442MHz) ;0x00 0x05E7C ;0x01 0x8CCCC; - * Ch08 (2447MHz) ;0x00 0x05E7C ;0x01 0x8CCCD; - * Ch09 (2452MHz) ;0x00 0x0DEFC ;0x01 0x8CCCC; - * Ch10 (2457MHz) ;0x00 0x0DEFC ;0x01 0x8CCCD; - * Ch11 (2462MHz) ;0x00 0x0DE7C ;0x01 0x8CCCC; - * Ch12 (2467MHz) ;0x00 0x0DE7C ;0x01 0x8CCCD; - * Ch13 (2472MHz) ;0x00 0x03EFC ;0x01 0x8CCCC; - * Ch14 (2484Mhz) ;0x00 0x03E7C ;0x01 0x86666; - * - * 0x02 0x401D8; RXDCOC BW 100Hz for RXHP low - * 0x02 0x481DC; RXDCOC BW 30Khz for RXHP low - * - * 0x03 0xCFFF0 - * 0x04 0x23800 - * 0x05 0xA3B72 - * 0x06 0x6DA01 - * 0x07 0xE1688 - * 0x08 0x11600 - * 0x09 0x99E02 - * 0x0A 0x5DDB0 - * 0x0B 0xD9900 - * 0x0C 0x3FFBD - * 0x0D 0xB0000 - * 0x0F 0xF00A0 - * - * RF Calibration for Airoha AL2230 - * - * 0x0f 0xf00a0 ; Initial Setting - * 0x0f 0xf00b0 ; Activate TX DCC - * 0x0f 0xf02a0 ; Activate Phase Calibration - * 0x0f 0xf00e0 ; Activate Filter RC Calibration - * 0x0f 0xf00a0 ; Restore Initial Setting - * ================================================================== - */ -static u32 al2230_rf_data[] = { - (0x00 << 20) | 0x09EFC, - (0x01 << 20) | 0x8CCCC, - (0x02 << 20) | 0x40058, - (0x03 << 20) | 0xCFFF0, - (0x04 << 20) | 0x24100, - (0x05 << 20) | 0xA3B2F, - (0x06 << 20) | 0x6DA01, - (0x07 << 20) | 0xE3628, - (0x08 << 20) | 0x11600, - (0x09 << 20) | 0x9DC02, - (0x0A << 20) | 0x5ddb0, - (0x0B << 20) | 0xD9900, - (0x0C << 20) | 0x3FFBD, - (0x0D << 20) | 0xB0000, - (0x0F << 20) | 0xF01A0 -}; - -static u32 al2230s_rf_data[] = { - (0x00 << 20) | 0x09EFC, - (0x01 << 20) | 0x8CCCC, - (0x02 << 20) | 0x40058, - (0x03 << 20) | 0xCFFF0, - (0x04 << 20) | 0x24100, - (0x05 << 20) | 0xA3B2F, - (0x06 << 20) | 0x6DA01, - (0x07 << 20) | 0xE3628, - (0x08 << 20) | 0x11600, - (0x09 << 20) | 0x9DC02, - (0x0A << 20) | 0x5DDB0, - (0x0B << 20) | 0xD9900, - (0x0C << 20) | 0x3FFBD, - (0x0D << 20) | 0xB0000, - (0x0F << 20) | 0xF01A0 -}; - -static u32 al2230_channel_data_24[][2] = { - {(0x00 << 20) | 0x09EFC, (0x01 << 20) | 0x8CCCC}, /* channe1 01 */ - {(0x00 << 20) | 0x09EFC, (0x01 << 20) | 0x8CCCD}, /* channe1 02 */ - {(0x00 << 20) | 0x09E7C, (0x01 << 20) | 0x8CCCC}, /* channe1 03 */ - {(0x00 << 20) | 0x09E7C, (0x01 << 20) | 0x8CCCD}, /* channe1 04 */ - {(0x00 << 20) | 0x05EFC, (0x01 << 20) | 0x8CCCC}, /* channe1 05 */ - {(0x00 << 20) | 0x05EFC, (0x01 << 20) | 0x8CCCD}, /* channe1 06 */ - {(0x00 << 20) | 0x05E7C, (0x01 << 20) | 0x8CCCC}, /* channe1 07 */ - {(0x00 << 20) | 0x05E7C, (0x01 << 20) | 0x8CCCD}, /* channe1 08 */ - {(0x00 << 20) | 0x0DEFC, (0x01 << 20) | 0x8CCCC}, /* channe1 09 */ - {(0x00 << 20) | 0x0DEFC, (0x01 << 20) | 0x8CCCD}, /* channe1 10 */ - {(0x00 << 20) | 0x0DE7C, (0x01 << 20) | 0x8CCCC}, /* channe1 11 */ - {(0x00 << 20) | 0x0DE7C, (0x01 << 20) | 0x8CCCD}, /* channe1 12 */ - {(0x00 << 20) | 0x03EFC, (0x01 << 20) | 0x8CCCC}, /* channe1 13 */ - {(0x00 << 20) | 0x03E7C, (0x01 << 20) | 0x86666} /* channe1 14 */ -}; - -/* Current setting. u32 airoha_power_data_24[] = {(0x09 << 20) | 0x90202, (0x09 << 20) | 0x96602, (0x09 << 20) | 0x97602}; */ -#define AIROHA_TXVGA_LOW_INDEX 31 /* Index for 0x90202 */ -#define AIROHA_TXVGA_MIDDLE_INDEX 12 /* Index for 0x96602 */ -#define AIROHA_TXVGA_HIGH_INDEX 8 /* Index for 0x97602 1.0.24.0 1.0.28.0 */ - -static u32 al2230_txvga_data[][2] = { - /* value , index */ - {0x090202, 0}, - {0x094202, 2}, - {0x092202, 4}, - {0x096202, 6}, - {0x091202, 8}, - {0x095202, 10}, - {0x093202, 12}, - {0x097202, 14}, - {0x090A02, 16}, - {0x094A02, 18}, - {0x092A02, 20}, - {0x096A02, 22}, - {0x091A02, 24}, - {0x095A02, 26}, - {0x093A02, 28}, - {0x097A02, 30}, - {0x090602, 32}, - {0x094602, 34}, - {0x092602, 36}, - {0x096602, 38}, - {0x091602, 40}, - {0x095602, 42}, - {0x093602, 44}, - {0x097602, 46}, - {0x090E02, 48}, - {0x098E02, 49}, - {0x094E02, 50}, - {0x09CE02, 51}, - {0x092E02, 52}, - {0x09AE02, 53}, - {0x096E02, 54}, - {0x09EE02, 55}, - {0x091E02, 56}, - {0x099E02, 57}, - {0x095E02, 58}, - {0x09DE02, 59}, - {0x093E02, 60}, - {0x09BE02, 61}, - {0x097E02, 62}, - {0x09FE02, 63} -}; - -/* - * ========================================== - * For Airoha AL7230, 2.4Ghz band - * 24bit, MSB first - */ - -/* channel independent registers: */ -static u32 al7230_rf_data_24[] = { - (0x00 << 24) | 0x003790, - (0x01 << 24) | 0x133331, - (0x02 << 24) | 0x841FF2, - (0x03 << 24) | 0x3FDFA3, - (0x04 << 24) | 0x7FD784, - (0x05 << 24) | 0x802B55, - (0x06 << 24) | 0x56AF36, - (0x07 << 24) | 0xCE0207, - (0x08 << 24) | 0x6EBC08, - (0x09 << 24) | 0x221BB9, - (0x0A << 24) | 0xE0000A, - (0x0B << 24) | 0x08071B, - (0x0C << 24) | 0x000A3C, - (0x0D << 24) | 0xFFFFFD, - (0x0E << 24) | 0x00000E, - (0x0F << 24) | 0x1ABA8F -}; - -static u32 al7230_channel_data_24[][2] = { - {(0x00 << 24) | 0x003790, (0x01 << 24) | 0x133331}, /* channe1 01 */ - {(0x00 << 24) | 0x003790, (0x01 << 24) | 0x1B3331}, /* channe1 02 */ - {(0x00 << 24) | 0x003790, (0x01 << 24) | 0x033331}, /* channe1 03 */ - {(0x00 << 24) | 0x003790, (0x01 << 24) | 0x0B3331}, /* channe1 04 */ - {(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x133331}, /* channe1 05 */ - {(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x1B3331}, /* channe1 06 */ - {(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x033331}, /* channe1 07 */ - {(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x0B3331}, /* channe1 08 */ - {(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x133331}, /* channe1 09 */ - {(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x1B3331}, /* channe1 10 */ - {(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x033331}, /* channe1 11 */ - {(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x0B3331}, /* channe1 12 */ - {(0x00 << 24) | 0x0037C0, (0x01 << 24) | 0x133331}, /* channe1 13 */ - {(0x00 << 24) | 0x0037C0, (0x01 << 24) | 0x066661} /* channel 14 */ -}; - -/* channel independent registers: */ -static u32 al7230_rf_data_50[] = { - (0x00 << 24) | 0x0FF520, - (0x01 << 24) | 0x000001, - (0x02 << 24) | 0x451FE2, - (0x03 << 24) | 0x5FDFA3, - (0x04 << 24) | 0x6FD784, - (0x05 << 24) | 0x853F55, - (0x06 << 24) | 0x56AF36, - (0x07 << 24) | 0xCE0207, - (0x08 << 24) | 0x6EBC08, - (0x09 << 24) | 0x221BB9, - (0x0A << 24) | 0xE0600A, - (0x0B << 24) | 0x08044B, - (0x0C << 24) | 0x00143C, - (0x0D << 24) | 0xFFFFFD, - (0x0E << 24) | 0x00000E, - (0x0F << 24) | 0x12BACF /* 5Ghz default state */ -}; - -static u32 al7230_channel_data_5[][4] = { - /* channel dependent registers: 0x00, 0x01 and 0x04 */ - /* 11J =========== */ - {184, (0x00 << 24) | 0x0FF520, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 184 */ - {188, (0x00 << 24) | 0x0FF520, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 188 */ - {192, (0x00 << 24) | 0x0FF530, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 192 */ - {196, (0x00 << 24) | 0x0FF530, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 196 */ - {8, (0x00 << 24) | 0x0FF540, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 008 */ - {12, (0x00 << 24) | 0x0FF540, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 012 */ - {16, (0x00 << 24) | 0x0FF550, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 016 */ - {34, (0x00 << 24) | 0x0FF560, (0x01 << 24) | 0x055551, (0x04 << 24) | 0x77F784}, /* channel 034 */ - {38, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x100001, (0x04 << 24) | 0x77F784}, /* channel 038 */ - {42, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x1AAAA1, (0x04 << 24) | 0x77F784}, /* channel 042 */ - {46, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x055551, (0x04 << 24) | 0x77F784}, /* channel 046 */ - /* 11 A/H ========= */ - {36, (0x00 << 24) | 0x0FF560, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 036 */ - {40, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 040 */ - {44, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 044 */ - {48, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 048 */ - {52, (0x00 << 24) | 0x0FF580, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 052 */ - {56, (0x00 << 24) | 0x0FF580, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 056 */ - {60, (0x00 << 24) | 0x0FF580, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 060 */ - {64, (0x00 << 24) | 0x0FF590, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 064 */ - {100, (0x00 << 24) | 0x0FF5C0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 100 */ - {104, (0x00 << 24) | 0x0FF5C0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 104 */ - {108, (0x00 << 24) | 0x0FF5C0, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 108 */ - {112, (0x00 << 24) | 0x0FF5D0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 112 */ - {116, (0x00 << 24) | 0x0FF5D0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 116 */ - {120, (0x00 << 24) | 0x0FF5D0, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 120 */ - {124, (0x00 << 24) | 0x0FF5E0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 124 */ - {128, (0x00 << 24) | 0x0FF5E0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 128 */ - {132, (0x00 << 24) | 0x0FF5E0, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 132 */ - {136, (0x00 << 24) | 0x0FF5F0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 136 */ - {140, (0x00 << 24) | 0x0FF5F0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 140 */ - {149, (0x00 << 24) | 0x0FF600, (0x01 << 24) | 0x180001, (0x04 << 24) | 0x77F784}, /* channel 149 */ - {153, (0x00 << 24) | 0x0FF600, (0x01 << 24) | 0x02AAA1, (0x04 << 24) | 0x77F784}, /* channel 153 */ - {157, (0x00 << 24) | 0x0FF600, (0x01 << 24) | 0x0D5551, (0x04 << 24) | 0x77F784}, /* channel 157 */ - {161, (0x00 << 24) | 0x0FF610, (0x01 << 24) | 0x180001, (0x04 << 24) | 0x77F784}, /* channel 161 */ - {165, (0x00 << 24) | 0x0FF610, (0x01 << 24) | 0x02AAA1, (0x04 << 24) | 0x77F784} /* channel 165 */ -}; - -/* - * RF Calibration <=== Register 0x0F - * 0x0F 0x1ABA8F; start from 2.4Ghz default state - * 0x0F 0x9ABA8F; TXDC compensation - * 0x0F 0x3ABA8F; RXFIL adjustment - * 0x0F 0x1ABA8F; restore 2.4Ghz default state - */ - -/* TXVGA Mapping Table <=== Register 0x0B */ -static u32 al7230_txvga_data[][2] = { - {0x08040B, 0}, /* TXVGA = 0; */ - {0x08041B, 1}, /* TXVGA = 1; */ - {0x08042B, 2}, /* TXVGA = 2; */ - {0x08043B, 3}, /* TXVGA = 3; */ - {0x08044B, 4}, /* TXVGA = 4; */ - {0x08045B, 5}, /* TXVGA = 5; */ - {0x08046B, 6}, /* TXVGA = 6; */ - {0x08047B, 7}, /* TXVGA = 7; */ - {0x08048B, 8}, /* TXVGA = 8; */ - {0x08049B, 9}, /* TXVGA = 9; */ - {0x0804AB, 10}, /* TXVGA = 10; */ - {0x0804BB, 11}, /* TXVGA = 11; */ - {0x0804CB, 12}, /* TXVGA = 12; */ - {0x0804DB, 13}, /* TXVGA = 13; */ - {0x0804EB, 14}, /* TXVGA = 14; */ - {0x0804FB, 15}, /* TXVGA = 15; */ - {0x08050B, 16}, /* TXVGA = 16; */ - {0x08051B, 17}, /* TXVGA = 17; */ - {0x08052B, 18}, /* TXVGA = 18; */ - {0x08053B, 19}, /* TXVGA = 19; */ - {0x08054B, 20}, /* TXVGA = 20; */ - {0x08055B, 21}, /* TXVGA = 21; */ - {0x08056B, 22}, /* TXVGA = 22; */ - {0x08057B, 23}, /* TXVGA = 23; */ - {0x08058B, 24}, /* TXVGA = 24; */ - {0x08059B, 25}, /* TXVGA = 25; */ - {0x0805AB, 26}, /* TXVGA = 26; */ - {0x0805BB, 27}, /* TXVGA = 27; */ - {0x0805CB, 28}, /* TXVGA = 28; */ - {0x0805DB, 29}, /* TXVGA = 29; */ - {0x0805EB, 30}, /* TXVGA = 30; */ - {0x0805FB, 31}, /* TXVGA = 31; */ - {0x08060B, 32}, /* TXVGA = 32; */ - {0x08061B, 33}, /* TXVGA = 33; */ - {0x08062B, 34}, /* TXVGA = 34; */ - {0x08063B, 35}, /* TXVGA = 35; */ - {0x08064B, 36}, /* TXVGA = 36; */ - {0x08065B, 37}, /* TXVGA = 37; */ - {0x08066B, 38}, /* TXVGA = 38; */ - {0x08067B, 39}, /* TXVGA = 39; */ - {0x08068B, 40}, /* TXVGA = 40; */ - {0x08069B, 41}, /* TXVGA = 41; */ - {0x0806AB, 42}, /* TXVGA = 42; */ - {0x0806BB, 43}, /* TXVGA = 43; */ - {0x0806CB, 44}, /* TXVGA = 44; */ - {0x0806DB, 45}, /* TXVGA = 45; */ - {0x0806EB, 46}, /* TXVGA = 46; */ - {0x0806FB, 47}, /* TXVGA = 47; */ - {0x08070B, 48}, /* TXVGA = 48; */ - {0x08071B, 49}, /* TXVGA = 49; */ - {0x08072B, 50}, /* TXVGA = 50; */ - {0x08073B, 51}, /* TXVGA = 51; */ - {0x08074B, 52}, /* TXVGA = 52; */ - {0x08075B, 53}, /* TXVGA = 53; */ - {0x08076B, 54}, /* TXVGA = 54; */ - {0x08077B, 55}, /* TXVGA = 55; */ - {0x08078B, 56}, /* TXVGA = 56; */ - {0x08079B, 57}, /* TXVGA = 57; */ - {0x0807AB, 58}, /* TXVGA = 58; */ - {0x0807BB, 59}, /* TXVGA = 59; */ - {0x0807CB, 60}, /* TXVGA = 60; */ - {0x0807DB, 61}, /* TXVGA = 61; */ - {0x0807EB, 62}, /* TXVGA = 62; */ - {0x0807FB, 63}, /* TXVGA = 63; */ -}; -/* ============================================= */ - -/* - * W89RF242 RFIC SPI programming initial data - * Winbond WLAN 11g RFIC BB-SPI register -- version FA5976A rev 1.3b - */ -static u32 w89rf242_rf_data[] = { - (0x00 << 24) | 0xF86100, /* 3E184; MODA (0x00) -- Normal mode ; calibration off */ - (0x01 << 24) | 0xEFFFC2, /* 3BFFF; MODB (0x01) -- turn off RSSI, and other circuits are turned on */ - (0x02 << 24) | 0x102504, /* 04094; FSET (0x02) -- default 20MHz crystal ; Icmp=1.5mA */ - (0x03 << 24) | 0x026286, /* 0098A; FCHN (0x03) -- default CH7, 2442MHz */ - (0x04 << 24) | 0x000208, /* 02008; FCAL (0x04) -- XTAL Freq Trim=001000 (socket board#1); FA5976AYG_v1.3C */ - (0x05 << 24) | 0x24C60A, /* 09316; GANA (0x05) -- TX VGA default (TXVGA=0x18(12)) & TXGPK=110 ; FA5976A_1.3D */ - (0x06 << 24) | 0x3432CC, /* 0D0CB; GANB (0x06) -- RXDC(DC offset) on; LNA=11; RXVGA=001011(11) ; RXFLSW=11(010001); RXGPK=00; RXGCF=00; -50dBm input */ - (0x07 << 24) | 0x0C68CE, /* 031A3; FILT (0x07) -- TX/RX filter with auto-tuning; TFLBW=011; RFLBW=100 */ - (0x08 << 24) | 0x100010, /* 04000; TCAL (0x08) -- for LO */ - (0x09 << 24) | 0x004012, /* 1B900; RCALA (0x09) -- FASTS=11; HPDE=01 (100nsec); SEHP=1 (select B0 pin=RXHP); RXHP=1 (Turn on RXHP function)(FA5976A_1.3C) */ - (0x0A << 24) | 0x704014, /* 1C100; RCALB (0x0A) */ - (0x0B << 24) | 0x18BDD6, /* 062F7; IQCAL (0x0B) -- Turn on LO phase tuner=0111 & RX-LO phase = 0111; FA5976A_1.3B */ - (0x0C << 24) | 0x575558, /* 15D55 ; IBSA (0x0C) -- IFPre =11 ; TC5376A_v1.3A for corner */ - (0x0D << 24) | 0x55545A, /* 15555 ; IBSB (0x0D) */ - (0x0E << 24) | 0x5557DC, /* 1555F ; IBSC (0x0E) -- IRLNA & IRLNB (PTAT & Const current)=01/01; FA5976B_1.3F */ - (0x10 << 24) | 0x000C20, /* 00030 ; TMODA (0x10) -- LNA_gain_step=0011 ; LNA=15/16dB */ - (0x11 << 24) | 0x0C0022, /* 03000 ; TMODB (0x11) -- Turn ON RX-Q path Test Switch; To improve IQ path group delay (FA5976A_1.3C) */ - (0x12 << 24) | 0x000024 /* TMODC (0x12) -- Turn OFF Temperature sensor */ -}; - -static u32 w89rf242_channel_data_24[][2] = { - {(0x03 << 24) | 0x025B06, (0x04 << 24) | 0x080408}, /* channe1 01 */ - {(0x03 << 24) | 0x025C46, (0x04 << 24) | 0x080408}, /* channe1 02 */ - {(0x03 << 24) | 0x025D86, (0x04 << 24) | 0x080408}, /* channe1 03 */ - {(0x03 << 24) | 0x025EC6, (0x04 << 24) | 0x080408}, /* channe1 04 */ - {(0x03 << 24) | 0x026006, (0x04 << 24) | 0x080408}, /* channe1 05 */ - {(0x03 << 24) | 0x026146, (0x04 << 24) | 0x080408}, /* channe1 06 */ - {(0x03 << 24) | 0x026286, (0x04 << 24) | 0x080408}, /* channe1 07 */ - {(0x03 << 24) | 0x0263C6, (0x04 << 24) | 0x080408}, /* channe1 08 */ - {(0x03 << 24) | 0x026506, (0x04 << 24) | 0x080408}, /* channe1 09 */ - {(0x03 << 24) | 0x026646, (0x04 << 24) | 0x080408}, /* channe1 10 */ - {(0x03 << 24) | 0x026786, (0x04 << 24) | 0x080408}, /* channe1 11 */ - {(0x03 << 24) | 0x0268C6, (0x04 << 24) | 0x080408}, /* channe1 12 */ - {(0x03 << 24) | 0x026A06, (0x04 << 24) | 0x080408}, /* channe1 13 */ - {(0x03 << 24) | 0x026D06, (0x04 << 24) | 0x080408} /* channe1 14 */ -}; - -static u32 w89rf242_txvga_old_mapping[][2] = { - {0, 0} , /* New <-> Old */ - {1, 1} , - {2, 2} , - {3, 3} , - {4, 4} , - {6, 5} , - {8, 6}, - {10, 7}, - {12, 8}, - {14, 9}, - {16, 10}, - {18, 11}, - {20, 12}, - {22, 13}, - {24, 14}, - {26, 15}, - {28, 16}, - {30, 17}, - {32, 18}, - {34, 19}, -}; - -static u32 w89rf242_txvga_data[][5] = { - /* low gain mode */ - {(0x05 << 24) | 0x24C00A, 0, 0x00292315, 0x0800FEFF, 0x52523131}, /* min gain */ - {(0x05 << 24) | 0x24C80A, 1, 0x00292315, 0x0800FEFF, 0x52523131}, - {(0x05 << 24) | 0x24C04A, 2, 0x00292315, 0x0800FEFF, 0x52523131}, /* (default) +14dBm (ANT) */ - {(0x05 << 24) | 0x24C84A, 3, 0x00292315, 0x0800FEFF, 0x52523131}, - - /* TXVGA=0x10 */ - {(0x05 << 24) | 0x24C40A, 4, 0x00292315, 0x0800FEFF, 0x60603838}, - {(0x05 << 24) | 0x24C40A, 5, 0x00262114, 0x0700FEFF, 0x65653B3B}, - - /* TXVGA=0x11 */ - { (0x05 << 24) | 0x24C44A, 6, 0x00241F13, 0x0700FFFF, 0x58583333}, - { (0x05 << 24) | 0x24C44A, 7, 0x00292315, 0x0800FEFF, 0x5E5E3737}, - - /* TXVGA=0x12 */ - {(0x05 << 24) | 0x24C48A, 8, 0x00262114, 0x0700FEFF, 0x53533030}, - {(0x05 << 24) | 0x24C48A, 9, 0x00241F13, 0x0700FFFF, 0x59593434}, - - /* TXVGA=0x13 */ - {(0x05 << 24) | 0x24C4CA, 10, 0x00292315, 0x0800FEFF, 0x52523030}, - {(0x05 << 24) | 0x24C4CA, 11, 0x00262114, 0x0700FEFF, 0x56563232}, - - /* TXVGA=0x14 */ - {(0x05 << 24) | 0x24C50A, 12, 0x00292315, 0x0800FEFF, 0x54543131}, - {(0x05 << 24) | 0x24C50A, 13, 0x00262114, 0x0700FEFF, 0x58583434}, - - /* TXVGA=0x15 */ - {(0x05 << 24) | 0x24C54A, 14, 0x00292315, 0x0800FEFF, 0x54543131}, - {(0x05 << 24) | 0x24C54A, 15, 0x00262114, 0x0700FEFF, 0x59593434}, - - /* TXVGA=0x16 */ - {(0x05 << 24) | 0x24C58A, 16, 0x00292315, 0x0800FEFF, 0x55553131}, - {(0x05 << 24) | 0x24C58A, 17, 0x00292315, 0x0800FEFF, 0x5B5B3535}, - - /* TXVGA=0x17 */ - {(0x05 << 24) | 0x24C5CA, 18, 0x00262114, 0x0700FEFF, 0x51512F2F}, - {(0x05 << 24) | 0x24C5CA, 19, 0x00241F13, 0x0700FFFF, 0x55553131}, - - /* TXVGA=0x18 */ - {(0x05 << 24) | 0x24C60A, 20, 0x00292315, 0x0800FEFF, 0x4F4F2E2E}, - {(0x05 << 24) | 0x24C60A, 21, 0x00262114, 0x0700FEFF, 0x53533030}, - - /* TXVGA=0x19 */ - {(0x05 << 24) | 0x24C64A, 22, 0x00292315, 0x0800FEFF, 0x4E4E2D2D}, - {(0x05 << 24) | 0x24C64A, 23, 0x00262114, 0x0700FEFF, 0x53533030}, - - /* TXVGA=0x1A */ - {(0x05 << 24) | 0x24C68A, 24, 0x00292315, 0x0800FEFF, 0x50502E2E}, - {(0x05 << 24) | 0x24C68A, 25, 0x00262114, 0x0700FEFF, 0x55553131}, - - /* TXVGA=0x1B */ - {(0x05 << 24) | 0x24C6CA, 26, 0x00262114, 0x0700FEFF, 0x53533030}, - {(0x05 << 24) | 0x24C6CA, 27, 0x00292315, 0x0800FEFF, 0x5A5A3434}, - - /* TXVGA=0x1C */ - {(0x05 << 24) | 0x24C70A, 28, 0x00292315, 0x0800FEFF, 0x55553131}, - {(0x05 << 24) | 0x24C70A, 29, 0x00292315, 0x0800FEFF, 0x5D5D3636}, - - /* TXVGA=0x1D */ - {(0x05 << 24) | 0x24C74A, 30, 0x00292315, 0x0800FEFF, 0x5F5F3737}, - {(0x05 << 24) | 0x24C74A, 31, 0x00262114, 0x0700FEFF, 0x65653B3B}, - - /* TXVGA=0x1E */ - {(0x05 << 24) | 0x24C78A, 32, 0x00292315, 0x0800FEFF, 0x66663B3B}, - {(0x05 << 24) | 0x24C78A, 33, 0x00262114, 0x0700FEFF, 0x70704141}, - - /* TXVGA=0x1F */ - {(0x05 << 24) | 0x24C7CA, 34, 0x00292315, 0x0800FEFF, 0x72724242} -}; - -/* ================================================================================================== */ - - - -/* - * ============================================================================================================= - * Uxx_ReadEthernetAddress -- - * - * Routine Description: - * Reads in the Ethernet address from the IC. - * - * Arguments: - * pHwData - The pHwData structure - * - * Return Value: - * - * The address is stored in EthernetIDAddr. - * ============================================================================================================= - */ -void Uxx_ReadEthernetAddress(struct hw_data *pHwData) -{ - u32 ltmp; - - /* - * Reading Ethernet address from EEPROM and set into hardware due to MAC address maybe change. - * Only unplug and plug again can make hardware read EEPROM again. - */ - Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08000000); /* Start EEPROM access + Read + address(0x0d) */ - Wb35Reg_ReadSync(pHwData, 0x03b4, <mp); - *(u16 *)pHwData->PermanentMacAddress = cpu_to_le16((u16) ltmp); - Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08010000); /* Start EEPROM access + Read + address(0x0d) */ - Wb35Reg_ReadSync(pHwData, 0x03b4, <mp); - *(u16 *)(pHwData->PermanentMacAddress + 2) = cpu_to_le16((u16) ltmp); - Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08020000); /* Start EEPROM access + Read + address(0x0d) */ - Wb35Reg_ReadSync(pHwData, 0x03b4, <mp); - *(u16 *)(pHwData->PermanentMacAddress + 4) = cpu_to_le16((u16) ltmp); - *(u16 *)(pHwData->PermanentMacAddress + 6) = 0; - Wb35Reg_WriteSync(pHwData, 0x03e8, cpu_to_le32(*(u32 *)pHwData->PermanentMacAddress)); - Wb35Reg_WriteSync(pHwData, 0x03ec, cpu_to_le32(*(u32 *)(pHwData->PermanentMacAddress + 4))); -} - - -/* - * =============================================================================================================== - * CardGetMulticastBit -- - * Description: - * For a given multicast address, returns the byte and bit in the card multicast registers that it hashes to. - * Calls CardComputeCrc() to determine the CRC value. - * Arguments: - * Address - the address - * Byte - the byte that it hashes to - * Value - will have a 1 in the relevant bit - * Return Value: - * None. - * ============================================================================================================== - */ -void CardGetMulticastBit(u8 Address[ETH_ALEN], u8 *Byte, u8 *Value) -{ - u32 Crc; - u32 BitNumber; - - /* First compute the CRC. */ - Crc = CardComputeCrc(Address, ETH_ALEN); - - /* The computed CRC is bit0~31 from left to right */ - /* At first we should do right shift 25bits, and read 7bits by using '&', 2^7=128 */ - BitNumber = (u32) ((Crc >> 26) & 0x3f); - - *Byte = (u8) (BitNumber >> 3); /* 900514 original (BitNumber / 8) */ - *Value = (u8) ((u8) 1 << (BitNumber % 8)); -} - -void Uxx_power_on_procedure(struct hw_data *pHwData) -{ - u32 ltmp, loop; - - if (pHwData->phy_type <= RF_MAXIM_V1) - Wb35Reg_WriteSync(pHwData, 0x03d4, 0xffffff38); - else { - Wb35Reg_WriteSync(pHwData, 0x03f4, 0xFF5807FF); - Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */ - msleep(10); - Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and */ - msleep(10); - ltmp = 0x4968; - if ((pHwData->phy_type == RF_WB_242) || - (RF_WB_242_1 == pHwData->phy_type)) - ltmp = 0x4468; - - Wb35Reg_WriteSync(pHwData, 0x03d0, ltmp); - Wb35Reg_WriteSync(pHwData, 0x03d4, 0xa0); /* PLL_PD REF_PD set to 0 */ - - msleep(20); - Wb35Reg_ReadSync(pHwData, 0x03d0, <mp); - loop = 500; /* Wait for 5 second */ - while (!(ltmp & 0x20) && loop--) { - msleep(10); - if (!Wb35Reg_ReadSync(pHwData, 0x03d0, <mp)) - break; - } - - Wb35Reg_WriteSync(pHwData, 0x03d4, 0xe0); /* MLK_EN */ - } - - Wb35Reg_WriteSync(pHwData, 0x03b0, 1); /* Reset hardware first */ - msleep(10); - - /* Set burst write delay */ - Wb35Reg_WriteSync(pHwData, 0x03f8, 0x7ff); -} - -static void Set_ChanIndep_RfData_al7230_24(struct hw_data *pHwData, u32 *pltmp, - char number) -{ - u8 i; - for (i = 0; i < number; i++) { - pHwData->phy_para[i] = al7230_rf_data_24[i]; - pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_24[i] & 0xffffff); - } -} - -static void Set_ChanIndep_RfData_al7230_50(struct hw_data *pHwData, u32 *pltmp, - char number) -{ - u8 i; - for (i = 0; i < number; i++) { - pHwData->phy_para[i] = al7230_rf_data_50[i]; - pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_50[i] & 0xffffff); - } -} - - -/* - * ============================================================================================================= - * RFSynthesizer_initial -- - * ============================================================================================================= - */ -void RFSynthesizer_initial(struct hw_data *pHwData) -{ - u32 altmp[32]; - u32 *pltmp = altmp; - u32 ltmp; - u8 number = 0x00; /* The number of register vale */ - u8 i; - - /* - * bit[31] SPI Enable. - * 1=perform synthesizer program operation. This bit will - * cleared automatically after the operation is completed. - * bit[30] SPI R/W Control - * 0=write, 1=read - * bit[29:24] SPI Data Format Length - * bit[17:4 ] RF Data bits. - * bit[3 :0 ] RF address. - */ - switch (pHwData->phy_type) { - case RF_MAXIM_2825: - case RF_MAXIM_V1: /* 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331) */ - number = ARRAY_SIZE(max2825_rf_data); - for (i = 0; i < number; i++) { - pHwData->phy_para[i] = max2825_rf_data[i]; /* Backup Rf parameter */ - pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_rf_data[i], 18); - } - break; - case RF_MAXIM_2827: - number = ARRAY_SIZE(max2827_rf_data); - for (i = 0; i < number; i++) { - pHwData->phy_para[i] = max2827_rf_data[i]; - pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_rf_data[i], 18); - } - break; - case RF_MAXIM_2828: - number = ARRAY_SIZE(max2828_rf_data); - for (i = 0; i < number; i++) { - pHwData->phy_para[i] = max2828_rf_data[i]; - pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_rf_data[i], 18); - } - break; - case RF_MAXIM_2829: - number = ARRAY_SIZE(max2829_rf_data); - for (i = 0; i < number; i++) { - pHwData->phy_para[i] = max2829_rf_data[i]; - pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_rf_data[i], 18); - } - break; - case RF_AIROHA_2230: - number = ARRAY_SIZE(al2230_rf_data); - for (i = 0; i < number; i++) { - pHwData->phy_para[i] = al2230_rf_data[i]; - pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_rf_data[i], 20); - } - break; - case RF_AIROHA_2230S: - number = ARRAY_SIZE(al2230s_rf_data); - for (i = 0; i < number; i++) { - pHwData->phy_para[i] = al2230s_rf_data[i]; - pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230s_rf_data[i], 20); - } - break; - case RF_AIROHA_7230: - /* Start to fill RF parameters, PLL_ON should be pulled low. */ - Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000); - pr_debug("* PLL_ON low\n"); - number = ARRAY_SIZE(al7230_rf_data_24); - Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number); - break; - case RF_WB_242: - case RF_WB_242_1: - number = ARRAY_SIZE(w89rf242_rf_data); - for (i = 0; i < number; i++) { - ltmp = w89rf242_rf_data[i]; - if (i == 4) { /* Update the VCO trim from EEPROM */ - ltmp &= ~0xff0; /* Mask bit4 ~bit11 */ - ltmp |= pHwData->VCO_trim << 4; - } - - pHwData->phy_para[i] = ltmp; - pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(ltmp, 24); - } - break; - } - - pHwData->phy_number = number; - - /* The 16 is the maximum capability of hardware. Here use 12 */ - if (number > 12) { - for (i = 0; i < 12; i++) /* For Al2230 */ - Wb35Reg_WriteSync(pHwData, 0x0864, pltmp[i]); - - pltmp += 12; - number -= 12; - } - - /* Write to register. number must less and equal than 16 */ - for (i = 0; i < number; i++) - Wb35Reg_WriteSync(pHwData, 0x864, pltmp[i]); - - /* Calibration only 1 time */ - if (pHwData->CalOneTime) - return; - pHwData->CalOneTime = 1; - - switch (pHwData->phy_type) { - case RF_AIROHA_2230: - ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x07 << 20) | 0xE168E, 20); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(10); - ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_rf_data[7], 20); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(10); - case RF_AIROHA_2230S: - Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */ - msleep(10); - Wb35Reg_WriteSync(pHwData, 0x03d4, 0xa0); /* PLL_PD REF_PD set to 0 */ - msleep(10); - Wb35Reg_WriteSync(pHwData, 0x03d4, 0xe0); /* MLK_EN */ - Wb35Reg_WriteSync(pHwData, 0x03b0, 1); /* Reset hardware first */ - msleep(10); - /* ========================================================= */ - - /* The follow code doesn't use the burst-write mode */ - ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F<<20) | 0xF01A0, 20); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - - ltmp = pHwData->reg.BB5C & 0xfffff000; - Wb35Reg_WriteSync(pHwData, 0x105c, ltmp); - pHwData->reg.BB50 |= 0x13; /* (MASK_IQCAL_MODE|MASK_CALIB_START) */ - Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50); - msleep(5); - - ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01B0, 20); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(5); - - ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01E0, 20); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(5); - - ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01A0, 20); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - - Wb35Reg_WriteSync(pHwData, 0x105c, pHwData->reg.BB5C); - pHwData->reg.BB50 &= ~0x13; /* (MASK_IQCAL_MODE|MASK_CALIB_START); */ - Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50); - break; - case RF_AIROHA_7230: - /* RF parameters have filled completely, PLL_ON should be pulled high */ - Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080); - pr_debug("* PLL_ON high\n"); - - /* 2.4GHz */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F; - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(5); - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F; - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(5); - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F; - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(5); - - /* 5GHz */ - Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000); - pr_debug("* PLL_ON low\n"); - - number = ARRAY_SIZE(al7230_rf_data_50); - Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number); - /* Write to register. number must less and equal than 16 */ - for (i = 0; i < number; i++) - Wb35Reg_WriteSync(pHwData, 0x0864, pltmp[i]); - msleep(5); - - Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080); - pr_debug("* PLL_ON high\n"); - - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F; - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(5); - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F; - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(5); - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF; - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(5); - break; - case RF_WB_242: - case RF_WB_242_1: - /* for FA5976A */ - ltmp = pHwData->reg.BB5C & 0xfffff000; - Wb35Reg_WriteSync(pHwData, 0x105c, ltmp); - Wb35Reg_WriteSync(pHwData, 0x1058, 0); - pHwData->reg.BB50 |= 0x3; /* (MASK_IQCAL_MODE|MASK_CALIB_START); */ - Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50); - - /* ----- Calibration (1). VCO frequency calibration */ - /* Calibration (1a.0). Synthesizer reset */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00101E, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(5); - /* Calibration (1a). VCO frequency calibration mode ; waiting 2msec VCO calibration time */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFE69c0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(2); - - /* ----- Calibration (2). TX baseband Gm-C filter auto-tuning */ - /* Calibration (2a). turn off ENCAL signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF8EBC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - /* Calibration (2b.0). TX filter auto-tuning BW: TFLBW=101 (TC5376A default) */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x07<<24) | 0x0C68CE, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - /* Calibration (2b). send TX reset signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00201E, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - /* Calibration (2c). turn-on TX Gm-C filter auto-tuning */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFCEBC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - udelay(150); /* Sleep 150 us */ - /* turn off ENCAL signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF8EBC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - - /* ----- Calibration (3). RX baseband Gm-C filter auto-tuning */ - /* Calibration (3a). turn off ENCAL signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - /* Calibration (3b.0). RX filter auto-tuning BW: RFLBW=100 (TC5376A+corner default;) */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x07<<24) | 0x0C68CE, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - /* Calibration (3b). send RX reset signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00401E, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - /* Calibration (3c). turn-on RX Gm-C filter auto-tuning */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFEEDC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - udelay(150); /* Sleep 150 us */ - /* Calibration (3e). turn off ENCAL signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - - /* ----- Calibration (4). TX LO leakage calibration */ - /* Calibration (4a). TX LO leakage calibration */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFD6BC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - udelay(150); /* Sleep 150 us */ - - /* ----- Calibration (5). RX DC offset calibration */ - /* Calibration (5a). turn off ENCAL signal and set to RX SW DC calibration mode */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - /* Calibration (5b). turn off AGC servo-loop & RSSI */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEBFFC2, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - - /* for LNA=11 -------- */ - /* Calibration (5c-h). RX DC offset current bias ON; & LNA=11; RXVGA=111111 */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x343FCC, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(2); - /* Calibration (5f). turn off ENCAL signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - - /* for LNA=10 -------- */ - /* Calibration (5c-m). RX DC offset current bias ON; & LNA=10; RXVGA=111111 */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x342FCC, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(2); - /* Calibration (5f). turn off ENCAL signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - - /* for LNA=01 -------- */ - /* Calibration (5c-m). RX DC offset current bias ON; & LNA=01; RXVGA=111111 */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x341FCC, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(2); - /* Calibration (5f). turn off ENCAL signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - - /* for LNA=00 -------- */ - /* Calibration (5c-l). RX DC offset current bias ON; & LNA=00; RXVGA=111111 */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x340FCC, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(2); - /* Calibration (5f). turn off ENCAL signal */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - /* Calibration (5g). turn on AGC servo-loop */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEFFFC2, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - - /* ----- Calibration (7). Switch RF chip to normal mode */ - /* 0x00 0xF86100 ; 3E184 ; Switch RF chip to normal mode */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF86100, 24); - Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); - msleep(5); - break; - } -} - -static void BBProcessor_AL7230_2400(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - u32 pltmp[12]; - - pltmp[0] = 0x16A8337A; /* 0x1000 AGC_Ctrl1 */ - pltmp[1] = 0x9AFF9AA6; /* 0x1004 AGC_Ctrl2 */ - pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */ - pltmp[3] = 0xFFF72031; /* 0x100c AGC_Ctrl4 */ - reg->BB0C = 0xFFF72031; - pltmp[4] = 0x0FacDCC5; /* 0x1010 AGC_Ctrl5 */ - pltmp[5] = 0x00CAA333; /* 0x1014 AGC_Ctrl6 */ - pltmp[6] = 0xF2211111; /* 0x1018 AGC_Ctrl7 */ - pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */ - pltmp[8] = 0x06443440; /* 0x1020 AGC_Ctrl9 */ - pltmp[9] = 0xA8002A79; /* 0x1024 AGC_Ctrl10 */ - pltmp[10] = 0x40000528; - pltmp[11] = 0x232D7F30; /* 0x102c A_ACQ_Ctrl */ - reg->BB2C = 0x232D7F30; - Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT); - - pltmp[0] = 0x00002c54; /* 0x1030 B_ACQ_Ctrl */ - reg->BB30 = 0x00002c54; - pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */ - pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */ - pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */ - reg->BB3C = 0x00000000; - pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */ - pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */ - pltmp[6] = 0x00332C1B; /* 0x1048 11b TX RC filter */ - pltmp[7] = 0x0A00FEFF; /* 0x104c 11b TX RC filter */ - pltmp[8] = 0x2B106208; /* 0x1050 MODE_Ctrl */ - reg->BB50 = 0x2B106208; - pltmp[9] = 0; /* 0x1054 */ - reg->BB54 = 0x00000000; - pltmp[10] = 0x52524242; /* 0x1058 IQ_Alpha */ - reg->BB58 = 0x52524242; - pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */ - Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT); -} - -static void BBProcessor_AL7230_5000(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - u32 pltmp[12]; - - pltmp[0] = 0x16AA6678; /* 0x1000 AGC_Ctrl1 */ - pltmp[1] = 0x9AFFA0B2; /* 0x1004 AGC_Ctrl2 */ - pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */ - pltmp[3] = 0xEFFF233E; /* 0x100c AGC_Ctrl4 */ - reg->BB0C = 0xEFFF233E; - pltmp[4] = 0x0FacDCC5; /* 0x1010 AGC_Ctrl5 */ - pltmp[5] = 0x00CAA333; /* 0x1014 AGC_Ctrl6 */ - pltmp[6] = 0xF2432111; /* 0x1018 AGC_Ctrl7 */ - pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */ - pltmp[8] = 0x05C43440; /* 0x1020 AGC_Ctrl9 */ - pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */ - pltmp[10] = 0x40000528; - pltmp[11] = 0x232FDF30;/* 0x102c A_ACQ_Ctrl */ - reg->BB2C = 0x232FDF30; - Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT); - - pltmp[0] = 0x80002C7C; /* 0x1030 B_ACQ_Ctrl */ - pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */ - pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */ - pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */ - reg->BB3C = 0x00000000; - pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */ - pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */ - pltmp[6] = 0x00332C1B; /* 0x1048 11b TX RC filter */ - pltmp[7] = 0x0A00FEFF; /* 0x104c 11b TX RC filter */ - pltmp[8] = 0x2B107208; /* 0x1050 MODE_Ctrl */ - reg->BB50 = 0x2B107208; - pltmp[9] = 0; /* 0x1054 */ - reg->BB54 = 0x00000000; - pltmp[10] = 0x52524242; /* 0x1058 IQ_Alpha */ - reg->BB58 = 0x52524242; - pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */ - Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT); -} - -/* - * =========================================================================== - * BBProcessorPowerupInit -- - * - * Description: - * Initialize the Baseband processor. - * - * Arguments: - * pHwData - Handle of the USB Device. - * - * Return values: - * None. - *============================================================================ - */ -void BBProcessor_initial(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - u32 i, pltmp[12]; - - switch (pHwData->phy_type) { - case RF_MAXIM_V1: /* Initializng the Winbond 2nd BB(with Phy board (v1) + Maxim 331) */ - pltmp[0] = 0x16F47E77; /* 0x1000 AGC_Ctrl1 */ - pltmp[1] = 0x9AFFAEA4; /* 0x1004 AGC_Ctrl2 */ - pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */ - pltmp[3] = 0xEFFF1A34; /* 0x100c AGC_Ctrl4 */ - reg->BB0C = 0xEFFF1A34; - pltmp[4] = 0x0FABE0B7; /* 0x1010 AGC_Ctrl5 */ - pltmp[5] = 0x00CAA332; /* 0x1014 AGC_Ctrl6 */ - pltmp[6] = 0xF6632111; /* 0x1018 AGC_Ctrl7 */ - pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */ - pltmp[8] = 0x04CC3640; /* 0x1020 AGC_Ctrl9 */ - pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */ - pltmp[10] = (pHwData->phy_type == 3) ? 0x40000a28 : 0x40000228; /* 0x1028 MAXIM_331(b31=0) + WBRF_V1(b11=1) : MAXIM_331(b31=0) + WBRF_V2(b11=0) */ - pltmp[11] = 0x232FDF30; /* 0x102c A_ACQ_Ctrl */ - reg->BB2C = 0x232FDF30; /* Modify for 33's 1.0.95.xxx version, antenna 1 */ - Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT); - - pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */ - reg->BB30 = 0x00002C54; - pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */ - pltmp[2] = 0x5B6C8769; /* 0x1038 B_TXRX_Ctrl */ - pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */ - reg->BB3C = 0x00000000; - pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */ - pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */ - pltmp[6] = 0x00453B24; /* 0x1048 11b TX RC filter */ - pltmp[7] = 0x0E00FEFF; /* 0x104c 11b TX RC filter */ - pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */ - reg->BB50 = 0x27106208; - pltmp[9] = 0; /* 0x1054 */ - reg->BB54 = 0x00000000; - pltmp[10] = 0x64646464; /* 0x1058 IQ_Alpha */ - reg->BB58 = 0x64646464; - pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */ - Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT); - - Wb35Reg_Write(pHwData, 0x1070, 0x00000045); - break; - - case RF_MAXIM_2825: - case RF_MAXIM_2827: - case RF_MAXIM_2828: - pltmp[0] = 0x16b47e77; /* 0x1000 AGC_Ctrl1 */ - pltmp[1] = 0x9affaea4; /* 0x1004 AGC_Ctrl2 */ - pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */ - pltmp[3] = 0xefff1a34; /* 0x100c AGC_Ctrl4 */ - reg->BB0C = 0xefff1a34; - pltmp[4] = 0x0fabe0b7; /* 0x1010 AGC_Ctrl5 */ - pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */ - pltmp[6] = 0xf6632111; /* 0x1018 AGC_Ctrl7 */ - pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */ - pltmp[8] = 0x04CC3640; /* 0x1020 AGC_Ctrl9 */ - pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */ - pltmp[10] = 0x40000528; - pltmp[11] = 0x232fdf30; /* 0x102c A_ACQ_Ctrl */ - reg->BB2C = 0x232fdf30; /* antenna 1 */ - Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT); - - pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */ - reg->BB30 = 0x00002C54; - pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */ - pltmp[2] = 0x5B6C8769; /* 0x1038 B_TXRX_Ctrl */ - pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */ - reg->BB3C = 0x00000000; - pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */ - pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */ - pltmp[6] = 0x00453B24; /* 0x1048 11b TX RC filter */ - pltmp[7] = 0x0D00FDFF; /* 0x104c 11b TX RC filter */ - pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */ - reg->BB50 = 0x27106208; - pltmp[9] = 0; /* 0x1054 */ - reg->BB54 = 0x00000000; - pltmp[10] = 0x64646464; /* 0x1058 IQ_Alpha */ - reg->BB58 = 0x64646464; - pltmp[11] = 0xAA28C000; /* 0x105c DC_Cancel */ - Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT); - - Wb35Reg_Write(pHwData, 0x1070, 0x00000045); - break; - - case RF_MAXIM_2829: - pltmp[0] = 0x16b47e77; /* 0x1000 AGC_Ctrl1 */ - pltmp[1] = 0x9affaea4; /* 0x1004 AGC_Ctrl2 */ - pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */ - pltmp[3] = 0xf4ff1632; /* 0x100c AGC_Ctrl4 */ - reg->BB0C = 0xf4ff1632; - pltmp[4] = 0x0fabe0b7; /* 0x1010 AGC_Ctrl5 */ - pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */ - pltmp[6] = 0xf8632112; /* 0x1018 AGC_Ctrl7 */ - pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */ - pltmp[8] = 0x04CC3640; /* 0x1020 AGC_Ctrl9 */ - pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */ - pltmp[10] = 0x40000528; - pltmp[11] = 0x232fdf30; /* 0x102c A_ACQ_Ctrl */ - reg->BB2C = 0x232fdf30; /* antenna 1 */ - Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT); - - pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */ - reg->BB30 = 0x00002C54; - pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */ - pltmp[2] = 0x5b2c8769; /* 0x1038 B_TXRX_Ctrl */ - pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */ - reg->BB3C = 0x00000000; - pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */ - pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */ - pltmp[6] = 0x002c2617; /* 0x1048 11b TX RC filter */ - pltmp[7] = 0x0800feff; /* 0x104c 11b TX RC filter */ - pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */ - reg->BB50 = 0x27106208; - pltmp[9] = 0; /* 0x1054 */ - reg->BB54 = 0x00000000; - pltmp[10] = 0x64644a4a; /* 0x1058 IQ_Alpha */ - reg->BB58 = 0x64646464; - pltmp[11] = 0xAA28C000; /* 0x105c DC_Cancel */ - Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT); - Wb35Reg_Write(pHwData, 0x1070, 0x00000045); - break; - case RF_AIROHA_2230: - pltmp[0] = 0X16764A77; /* 0x1000 AGC_Ctrl1 */ - pltmp[1] = 0x9affafb2; /* 0x1004 AGC_Ctrl2 */ - pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */ - pltmp[3] = 0xFFFd203c; /* 0x100c AGC_Ctrl4 */ - reg->BB0C = 0xFFFd203c; - pltmp[4] = 0X0FBFDCc5; /* 0x1010 AGC_Ctrl5 */ - pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */ - pltmp[6] = 0XF6632111; /* 0x1018 AGC_Ctrl7 */ - pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */ - pltmp[8] = 0x04C43640; /* 0x1020 AGC_Ctrl9 */ - pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */ - pltmp[10] = 0X40000528; - pltmp[11] = 0x232dfF30; /* 0x102c A_ACQ_Ctrl */ - reg->BB2C = 0x232dfF30; /* antenna 1 */ - Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT); - - pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */ - reg->BB30 = 0x00002C54; - pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */ - pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */ - pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */ - reg->BB3C = 0x00000000; - pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */ - pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */ - pltmp[6] = BB48_DEFAULT_AL2230_11G; /* 0x1048 11b TX RC filter */ - reg->BB48 = BB48_DEFAULT_AL2230_11G; /* 20051221 ch14 */ - pltmp[7] = BB4C_DEFAULT_AL2230_11G; /* 0x104c 11b TX RC filter */ - reg->BB4C = BB4C_DEFAULT_AL2230_11G; - pltmp[8] = 0x27106200; /* 0x1050 MODE_Ctrl */ - reg->BB50 = 0x27106200; - pltmp[9] = 0; /* 0x1054 */ - reg->BB54 = 0x00000000; - pltmp[10] = 0x52524242; /* 0x1058 IQ_Alpha */ - reg->BB58 = 0x52524242; - pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */ - Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT); - - Wb35Reg_Write(pHwData, 0x1070, 0x00000045); - break; - case RF_AIROHA_2230S: - pltmp[0] = 0X16764A77; /* 0x1000 AGC_Ctrl1 */ - pltmp[1] = 0x9affafb2; /* 0x1004 AGC_Ctrl2 */ - pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */ - pltmp[3] = 0xFFFd203c; /* 0x100c AGC_Ctrl4 */ - reg->BB0C = 0xFFFd203c; - pltmp[4] = 0X0FBFDCc5; /* 0x1010 AGC_Ctrl5 */ - pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */ - pltmp[6] = 0XF6632111; /* 0x1018 AGC_Ctrl7 */ - pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */ - pltmp[8] = 0x04C43640; /* 0x1020 AGC_Ctrl9 */ - pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */ - pltmp[10] = 0X40000528; - pltmp[11] = 0x232dfF30; /* 0x102c A_ACQ_Ctrl */ - reg->BB2C = 0x232dfF30; /* antenna 1 */ - Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT); - - pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */ - reg->BB30 = 0x00002C54; - pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */ - pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */ - pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */ - reg->BB3C = 0x00000000; - pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */ - pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */ - pltmp[6] = BB48_DEFAULT_AL2230_11G; /* 0x1048 11b TX RC filter */ - reg->BB48 = BB48_DEFAULT_AL2230_11G; /* ch14 */ - pltmp[7] = BB4C_DEFAULT_AL2230_11G; /* 0x104c 11b TX RC filter */ - reg->BB4C = BB4C_DEFAULT_AL2230_11G; - pltmp[8] = 0x27106200; /* 0x1050 MODE_Ctrl */ - reg->BB50 = 0x27106200; - pltmp[9] = 0; /* 0x1054 */ - reg->BB54 = 0x00000000; - pltmp[10] = 0x52523232; /* 0x1058 IQ_Alpha */ - reg->BB58 = 0x52523232; - pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */ - Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT); - - Wb35Reg_Write(pHwData, 0x1070, 0x00000045); - break; - case RF_AIROHA_7230: - BBProcessor_AL7230_2400(pHwData); - - Wb35Reg_Write(pHwData, 0x1070, 0x00000045); - break; - case RF_WB_242: - case RF_WB_242_1: - pltmp[0] = 0x16A8525D; /* 0x1000 AGC_Ctrl1 */ - pltmp[1] = 0x9AFF9ABA; /* 0x1004 AGC_Ctrl2 */ - pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */ - pltmp[3] = 0xEEE91C32; /* 0x100c AGC_Ctrl4 */ - reg->BB0C = 0xEEE91C32; - pltmp[4] = 0x0FACDCC5; /* 0x1010 AGC_Ctrl5 */ - pltmp[5] = 0x000AA344; /* 0x1014 AGC_Ctrl6 */ - pltmp[6] = 0x22222221; /* 0x1018 AGC_Ctrl7 */ - pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */ - pltmp[8] = 0x04CC3440; /* 0x1020 AGC_Ctrl9 */ - pltmp[9] = 0xA9002A79; /* 0x1024 AGC_Ctrl10 */ - pltmp[10] = 0x40000528; /* 0x1028 */ - pltmp[11] = 0x23457F30; /* 0x102c A_ACQ_Ctrl */ - reg->BB2C = 0x23457F30; - Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT); - - pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */ - reg->BB30 = 0x00002C54; - pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */ - pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */ - pltmp[3] = pHwData->BB3c_cal; /* 0x103c 11a TX LS filter */ - reg->BB3C = pHwData->BB3c_cal; - pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */ - pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */ - pltmp[6] = BB48_DEFAULT_WB242_11G; /* 0x1048 11b TX RC filter */ - reg->BB48 = BB48_DEFAULT_WB242_11G; - pltmp[7] = BB4C_DEFAULT_WB242_11G; /* 0x104c 11b TX RC filter */ - reg->BB4C = BB4C_DEFAULT_WB242_11G; - pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */ - reg->BB50 = 0x27106208; - pltmp[9] = pHwData->BB54_cal; /* 0x1054 */ - reg->BB54 = pHwData->BB54_cal; - pltmp[10] = 0x52523131; /* 0x1058 IQ_Alpha */ - reg->BB58 = 0x52523131; - pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */ - Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT); - - Wb35Reg_Write(pHwData, 0x1070, 0x00000045); - break; - } - - /* Fill the LNA table */ - reg->LNAValue[0] = (u8) (reg->BB0C & 0xff); - reg->LNAValue[1] = 0; - reg->LNAValue[2] = (u8) ((reg->BB0C & 0xff00) >> 8); - reg->LNAValue[3] = 0; - - /* Fill SQ3 table */ - for (i = 0; i < MAX_SQ3_FILTER_SIZE; i++) - reg->SQ3_filter[i] = 0x2f; /* half of Bit 0 ~ 6 */ -} - -static inline void set_tx_power_per_channel_max2829(struct hw_data *pHwData, - struct chan_info Channel) -{ - RFSynthesizer_SetPowerIndex(pHwData, 100); -} - -static void set_tx_power_per_channel_al2230(struct hw_data *pHwData, - struct chan_info Channel) -{ - u8 index = 100; - if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff) - index = pHwData->TxVgaFor24[Channel.ChanNo - 1]; - - RFSynthesizer_SetPowerIndex(pHwData, index); -} - -static void set_tx_power_per_channel_al7230(struct hw_data *pHwData, - struct chan_info Channel) -{ - u8 i, index = 100; - - switch (Channel.band) { - case BAND_TYPE_DSSS: - case BAND_TYPE_OFDM_24: - if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff) - index = pHwData->TxVgaFor24[Channel.ChanNo - 1]; - break; - case BAND_TYPE_OFDM_5: - for (i = 0; i < 35; i++) { - if (Channel.ChanNo == pHwData->TxVgaFor50[i].ChanNo) { - if (pHwData->TxVgaFor50[i].TxVgaValue != 0xff) - index = pHwData->TxVgaFor50[i].TxVgaValue; - break; - } - } - break; - } - RFSynthesizer_SetPowerIndex(pHwData, index); -} - -static void set_tx_power_per_channel_wb242(struct hw_data *pHwData, - struct chan_info Channel) -{ - u8 index = 100; - - switch (Channel.band) { - case BAND_TYPE_DSSS: - case BAND_TYPE_OFDM_24: - if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff) - index = pHwData->TxVgaFor24[Channel.ChanNo - 1]; - break; - case BAND_TYPE_OFDM_5: - break; - } - RFSynthesizer_SetPowerIndex(pHwData, index); -} - -/* - * ========================================================================== - * RFSynthesizer_SwitchingChannel -- - * - * Description: - * Swithch the RF channel. - * - * Arguments: - * pHwData - Handle of the USB Device. - * Channel - The channel no. - * - * Return values: - * None. - * =========================================================================== - */ -void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData, struct chan_info Channel) -{ - struct wb35_reg *reg = &pHwData->reg; - u32 pltmp[16]; /* The 16 is the maximum capability of hardware */ - u32 count, ltmp; - u8 i, j, number; - u8 ChnlTmp; - - switch (pHwData->phy_type) { - case RF_MAXIM_2825: - case RF_MAXIM_V1: /* 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331) */ - - if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 13 */ - for (i = 0; i < 3; i++) - pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_channel_data_24[Channel.ChanNo-1][i], 18); - Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT); - } - RFSynthesizer_SetPowerIndex(pHwData, 100); - break; - case RF_MAXIM_2827: - if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 13 */ - for (i = 0; i < 3; i++) - pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_channel_data_24[Channel.ChanNo-1][i], 18); - Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT); - } else if (Channel.band == BAND_TYPE_OFDM_5) { /* channel 36 ~ 64 */ - ChnlTmp = (Channel.ChanNo - 36) / 4; - for (i = 0; i < 3; i++) - pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_channel_data_50[ChnlTmp][i], 18); - Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT); - } - RFSynthesizer_SetPowerIndex(pHwData, 100); - break; - case RF_MAXIM_2828: - if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 13 */ - for (i = 0; i < 3; i++) - pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_channel_data_24[Channel.ChanNo-1][i], 18); - Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT); - } else if (Channel.band == BAND_TYPE_OFDM_5) { /* channel 36 ~ 64 */ - ChnlTmp = (Channel.ChanNo - 36) / 4; - for (i = 0; i < 3; i++) - pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_channel_data_50[ChnlTmp][i], 18); - Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT); - } - RFSynthesizer_SetPowerIndex(pHwData, 100); - break; - case RF_MAXIM_2829: - if (Channel.band <= BAND_TYPE_OFDM_24) { - for (i = 0; i < 3; i++) - pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_channel_data_24[Channel.ChanNo-1][i], 18); - Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT); - } else if (Channel.band == BAND_TYPE_OFDM_5) { - count = ARRAY_SIZE(max2829_channel_data_50); - - for (i = 0; i < count; i++) { - if (max2829_channel_data_50[i][0] == Channel.ChanNo) { - for (j = 0; j < 3; j++) - pltmp[j] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_channel_data_50[i][j+1], 18); - Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT); - - if ((max2829_channel_data_50[i][3] & 0x3FFFF) == 0x2A946) { - ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse((5 << 18) | 0x2A906, 18); - Wb35Reg_Write(pHwData, 0x0864, ltmp); - } else { /* 0x2A9C6 */ - ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse((5 << 18) | 0x2A986, 18); - Wb35Reg_Write(pHwData, 0x0864, ltmp); - } - } - } - } - set_tx_power_per_channel_max2829(pHwData, Channel); - break; - case RF_AIROHA_2230: - case RF_AIROHA_2230S: - if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */ - for (i = 0; i < 2; i++) - pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_channel_data_24[Channel.ChanNo-1][i], 20); - Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 2, NO_INCREMENT); - } - set_tx_power_per_channel_al2230(pHwData, Channel); - break; - case RF_AIROHA_7230: - /* Channel independent registers */ - if (Channel.band != pHwData->band) { - if (Channel.band <= BAND_TYPE_OFDM_24) { - /* Update BB register */ - BBProcessor_AL7230_2400(pHwData); - - number = ARRAY_SIZE(al7230_rf_data_24); - Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number); - } else { - /* Update BB register */ - BBProcessor_AL7230_5000(pHwData); - - number = ARRAY_SIZE(al7230_rf_data_50); - Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number); - } - - /* Write to register. number must less and equal than 16 */ - Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, number, NO_INCREMENT); - pr_debug("Band changed\n"); - } - - if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */ - for (i = 0; i < 2; i++) - pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_channel_data_24[Channel.ChanNo-1][i]&0xffffff); - Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 2, NO_INCREMENT); - } else if (Channel.band == BAND_TYPE_OFDM_5) { - /* Update Reg12 */ - if ((Channel.ChanNo > 64) && (Channel.ChanNo <= 165)) { - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x00143c; - Wb35Reg_Write(pHwData, 0x0864, ltmp); - } else { /* reg12 = 0x00147c at Channel 4920 ~ 5320 */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x00147c; - Wb35Reg_Write(pHwData, 0x0864, ltmp); - } - - count = ARRAY_SIZE(al7230_channel_data_5); - - for (i = 0; i < count; i++) { - if (al7230_channel_data_5[i][0] == Channel.ChanNo) { - for (j = 0; j < 3; j++) - pltmp[j] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_channel_data_5[i][j+1] & 0xffffff); - Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT); - } - } - } - set_tx_power_per_channel_al7230(pHwData, Channel); - break; - case RF_WB_242: - case RF_WB_242_1: - - if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */ - ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(w89rf242_channel_data_24[Channel.ChanNo-1][0], 24); - Wb35Reg_Write(pHwData, 0x864, ltmp); - } - set_tx_power_per_channel_wb242(pHwData, Channel); - break; - } - - if (Channel.band <= BAND_TYPE_OFDM_24) { - /* BB: select 2.4 GHz, bit[12-11]=00 */ - reg->BB50 &= ~(BIT(11) | BIT(12)); - Wb35Reg_Write(pHwData, 0x1050, reg->BB50); /* MODE_Ctrl */ - /* MAC: select 2.4 GHz, bit[5]=0 */ - reg->M78_ERPInformation &= ~BIT(5); - Wb35Reg_Write(pHwData, 0x0878, reg->M78_ERPInformation); - /* enable 11b Baseband */ - reg->BB30 &= ~BIT(31); - Wb35Reg_Write(pHwData, 0x1030, reg->BB30); - } else if (Channel.band == BAND_TYPE_OFDM_5) { - /* BB: select 5 GHz */ - reg->BB50 &= ~(BIT(11) | BIT(12)); - if (Channel.ChanNo <= 64) - reg->BB50 |= BIT(12); /* 10-5.25GHz */ - else if ((Channel.ChanNo >= 100) && (Channel.ChanNo <= 124)) - reg->BB50 |= BIT(11); /* 01-5.48GHz */ - else if ((Channel.ChanNo >= 128) && (Channel.ChanNo <= 161)) - reg->BB50 |= (BIT(12) | BIT(11)); /* 11-5.775GHz */ - else /* Chan 184 ~ 196 will use bit[12-11] = 10 in version sh-src-1.2.25 */ - reg->BB50 |= BIT(12); - Wb35Reg_Write(pHwData, 0x1050, reg->BB50); /* MODE_Ctrl */ - - /* (1) M78 should alway use 2.4G setting when using RF_AIROHA_7230 */ - /* (2) BB30 has been updated previously. */ - if (pHwData->phy_type != RF_AIROHA_7230) { - /* MAC: select 5 GHz, bit[5]=1 */ - reg->M78_ERPInformation |= BIT(5); - Wb35Reg_Write(pHwData, 0x0878, reg->M78_ERPInformation); - - /* disable 11b Baseband */ - reg->BB30 |= BIT(31); - Wb35Reg_Write(pHwData, 0x1030, reg->BB30); - } - } -} - -/* - * Set the tx power directly from DUT GUI, not from the EEPROM. - * Return the current setting - */ -u8 RFSynthesizer_SetPowerIndex(struct hw_data *pHwData, u8 PowerIndex) -{ - u32 Band = pHwData->band; - u8 index = 0; - - if (pHwData->power_index == PowerIndex) - return PowerIndex; - - if (RF_MAXIM_2825 == pHwData->phy_type) { - /* Channel 1 - 13 */ - index = RFSynthesizer_SetMaxim2825Power(pHwData, PowerIndex); - } else if (RF_MAXIM_2827 == pHwData->phy_type) { - if (Band <= BAND_TYPE_OFDM_24) /* Channel 1 - 13 */ - index = RFSynthesizer_SetMaxim2827_24Power(pHwData, PowerIndex); - else /* Channel 36 - 64 */ - index = RFSynthesizer_SetMaxim2827_50Power(pHwData, PowerIndex); - } else if (RF_MAXIM_2828 == pHwData->phy_type) { - if (Band <= BAND_TYPE_OFDM_24) /* Channel 1 - 13 */ - index = RFSynthesizer_SetMaxim2828_24Power(pHwData, PowerIndex); - else /* Channel 36 - 64 */ - index = RFSynthesizer_SetMaxim2828_50Power(pHwData, PowerIndex); - } else if (RF_AIROHA_2230 == pHwData->phy_type) { - /* Power index: 0 ~ 63 --- Channel 1 - 14 */ - index = RFSynthesizer_SetAiroha2230Power(pHwData, PowerIndex); - index = (u8) al2230_txvga_data[index][1]; - } else if (RF_AIROHA_2230S == pHwData->phy_type) { - /* Power index: 0 ~ 63 --- Channel 1 - 14 */ - index = RFSynthesizer_SetAiroha2230Power(pHwData, PowerIndex); - index = (u8) al2230_txvga_data[index][1]; - } else if (RF_AIROHA_7230 == pHwData->phy_type) { - /* Power index: 0 ~ 63 */ - index = RFSynthesizer_SetAiroha7230Power(pHwData, PowerIndex); - index = (u8)al7230_txvga_data[index][1]; - } else if ((RF_WB_242 == pHwData->phy_type) || - (RF_WB_242_1 == pHwData->phy_type)) { - /* Power index: 0 ~ 19 for original. New range is 0 ~ 33 */ - index = RFSynthesizer_SetWinbond242Power(pHwData, PowerIndex); - index = (u8)w89rf242_txvga_data[index][1]; - } - - pHwData->power_index = index; /* Backup current */ - return index; -} - -/* -- Sub function */ -u8 RFSynthesizer_SetMaxim2828_24Power(struct hw_data *pHwData, u8 index) -{ - u32 PowerData; - if (index > 1) - index = 1; - PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_power_data_24[index], 18); - Wb35Reg_Write(pHwData, 0x0864, PowerData); - return index; -} - -u8 RFSynthesizer_SetMaxim2828_50Power(struct hw_data *pHwData, u8 index) -{ - u32 PowerData; - if (index > 1) - index = 1; - PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_power_data_50[index], 18); - Wb35Reg_Write(pHwData, 0x0864, PowerData); - return index; -} - -u8 RFSynthesizer_SetMaxim2827_24Power(struct hw_data *pHwData, u8 index) -{ - u32 PowerData; - if (index > 1) - index = 1; - PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_power_data_24[index], 18); - Wb35Reg_Write(pHwData, 0x0864, PowerData); - return index; -} - -u8 RFSynthesizer_SetMaxim2827_50Power(struct hw_data *pHwData, u8 index) -{ - u32 PowerData; - if (index > 1) - index = 1; - PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_power_data_50[index], 18); - Wb35Reg_Write(pHwData, 0x0864, PowerData); - return index; -} - -u8 RFSynthesizer_SetMaxim2825Power(struct hw_data *pHwData, u8 index) -{ - u32 PowerData; - if (index > 1) - index = 1; - PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_power_data_24[index], 18); - Wb35Reg_Write(pHwData, 0x0864, PowerData); - return index; -} - -u8 RFSynthesizer_SetAiroha2230Power(struct hw_data *pHwData, u8 index) -{ - u32 PowerData; - u8 i, count; - - count = ARRAY_SIZE(al2230_txvga_data); - for (i = 0; i < count; i++) { - if (al2230_txvga_data[i][1] >= index) - break; - } - if (i == count) - i--; - - PowerData = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_txvga_data[i][0], 20); - Wb35Reg_Write(pHwData, 0x0864, PowerData); - return i; -} - -u8 RFSynthesizer_SetAiroha7230Power(struct hw_data *pHwData, u8 index) -{ - u32 PowerData; - u8 i, count; - - count = ARRAY_SIZE(al7230_txvga_data); - for (i = 0; i < count; i++) { - if (al7230_txvga_data[i][1] >= index) - break; - } - if (i == count) - i--; - PowerData = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_txvga_data[i][0] & 0xffffff); - Wb35Reg_Write(pHwData, 0x0864, PowerData); - return i; -} - -u8 RFSynthesizer_SetWinbond242Power(struct hw_data *pHwData, u8 index) -{ - u32 PowerData; - u8 i, count; - - count = ARRAY_SIZE(w89rf242_txvga_data); - for (i = 0; i < count; i++) { - if (w89rf242_txvga_data[i][1] >= index) - break; - } - if (i == count) - i--; - - /* Set TxVga into RF */ - PowerData = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(w89rf242_txvga_data[i][0], 24); - Wb35Reg_Write(pHwData, 0x0864, PowerData); - - /* Update BB48 BB4C BB58 for high precision txvga */ - Wb35Reg_Write(pHwData, 0x1048, w89rf242_txvga_data[i][2]); - Wb35Reg_Write(pHwData, 0x104c, w89rf242_txvga_data[i][3]); - Wb35Reg_Write(pHwData, 0x1058, w89rf242_txvga_data[i][4]); - - return i; -} - -/* - * =========================================================================== - * Dxx_initial -- - * Mxx_initial -- - * - * Routine Description: - * Initial the hardware setting and module variable - * =========================================================================== - */ -void Dxx_initial(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - - /* - * Old IC: Single mode only. - * New IC: operation decide by Software set bit[4]. 1:multiple 0: single - */ - reg->D00_DmaControl = 0xc0000004; /* Txon, Rxon, multiple Rx for new 4k DMA */ - /* Txon, Rxon, single Rx for old 8k ASIC */ - if (!HAL_USB_MODE_BURST(pHwData)) - reg->D00_DmaControl = 0xc0000000; /* Txon, Rxon, single Rx for new 4k DMA */ - - Wb35Reg_WriteSync(pHwData, 0x0400, reg->D00_DmaControl); -} - -void Mxx_initial(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - u32 tmp; - u32 pltmp[11]; - u16 i; - - - /* - * ====================================================== - * Initial Mxx register - * ====================================================== - */ - - /* M00 bit set */ - reg->M00_MacControl = 0x80000000; /* Solve beacon sequence number stop by hardware */ - - /* M24 disable enter power save, BB RxOn and enable NAV attack */ - reg->M24_MacControl = 0x08040042; - pltmp[0] = reg->M24_MacControl; - - pltmp[1] = 0; /* Skip M28, because no initialize value is required. */ - - /* M2C CWmin and CWmax setting */ - pHwData->cwmin = DEFAULT_CWMIN; - pHwData->cwmax = DEFAULT_CWMAX; - reg->M2C_MacControl = DEFAULT_CWMIN << 10; - reg->M2C_MacControl |= DEFAULT_CWMAX; - pltmp[2] = reg->M2C_MacControl; - - /* M30 BSSID */ - pltmp[3] = *(u32 *)pHwData->bssid; - - /* M34 */ - pHwData->AID = DEFAULT_AID; - tmp = *(u16 *) (pHwData->bssid + 4); - tmp |= DEFAULT_AID << 16; - pltmp[4] = tmp; - - /* M38 */ - reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT << 8) | (DEFAULT_LONG_RETRY_LIMIT << 4) | DEFAULT_SHORT_RETRY_LIMIT; - pltmp[5] = reg->M38_MacControl; - - /* M3C */ - tmp = (DEFAULT_PIFST << 26) | (DEFAULT_EIFST << 16) | (DEFAULT_DIFST << 8) | (DEFAULT_SIFST << 4) | DEFAULT_OSIFST; - reg->M3C_MacControl = tmp; - pltmp[6] = tmp; - - /* M40 */ - pHwData->slot_time_select = DEFAULT_SLOT_TIME; - tmp = (DEFAULT_ATIMWD << 16) | DEFAULT_SLOT_TIME; - reg->M40_MacControl = tmp; - pltmp[7] = tmp; - - /* M44 */ - tmp = DEFAULT_MAX_TX_MSDU_LIFE_TIME << 10; /* *1024 */ - reg->M44_MacControl = tmp; - pltmp[8] = tmp; - - /* M48 */ - pHwData->BeaconPeriod = DEFAULT_BEACON_INTERVAL; - pHwData->ProbeDelay = DEFAULT_PROBE_DELAY_TIME; - tmp = (DEFAULT_BEACON_INTERVAL << 16) | DEFAULT_PROBE_DELAY_TIME; - reg->M48_MacControl = tmp; - pltmp[9] = tmp; - - /* M4C */ - reg->M4C_MacStatus = (DEFAULT_PROTOCOL_VERSION << 30) | (DEFAULT_MAC_POWER_STATE << 28) | (DEFAULT_DTIM_ALERT_TIME << 24); - pltmp[10] = reg->M4C_MacStatus; - - for (i = 0; i < 11; i++) - Wb35Reg_WriteSync(pHwData, 0x0824 + i * 4, pltmp[i]); - - /* M60 */ - Wb35Reg_WriteSync(pHwData, 0x0860, 0x12481248); - reg->M60_MacControl = 0x12481248; - - /* M68 */ - Wb35Reg_WriteSync(pHwData, 0x0868, 0x00050900); - reg->M68_MacControl = 0x00050900; - - /* M98 */ - Wb35Reg_WriteSync(pHwData, 0x0898, 0xffff8888); - reg->M98_MacControl = 0xffff8888; -} - - -void Uxx_power_off_procedure(struct hw_data *pHwData) -{ - /* SW, PMU reset and turn off clock */ - Wb35Reg_WriteSync(pHwData, 0x03b0, 3); - Wb35Reg_WriteSync(pHwData, 0x03f0, 0xf9); -} - -/*Decide the TxVga of every channel */ -void GetTxVgaFromEEPROM(struct hw_data *pHwData) -{ - u32 i, j, ltmp; - u16 Value[MAX_TXVGA_EEPROM]; - u8 *pctmp; - u8 ctmp = 0; - - /* Get the entire TxVga setting in EEPROM */ - for (i = 0; i < MAX_TXVGA_EEPROM; i++) { - Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08100000 + 0x00010000 * i); - Wb35Reg_ReadSync(pHwData, 0x03b4, <mp); - Value[i] = (u16) (ltmp & 0xffff); /* Get 16 bit available */ - Value[i] = cpu_to_le16(Value[i]); /* [7:0]2412 [7:0]2417 .... */ - } - - /* Adjust the filed which fills with reserved value. */ - pctmp = (u8 *) Value; - for (i = 0; i < (MAX_TXVGA_EEPROM * 2); i++) { - if (pctmp[i] != 0xff) - ctmp = pctmp[i]; - else - pctmp[i] = ctmp; - } - - /* Adjust WB_242 to WB_242_1 TxVga scale */ - if (pHwData->phy_type == RF_WB_242) { - for (i = 0; i < 4; i++) { /* Only 2412 2437 2462 2484 case must be modified */ - for (j = 0; j < ARRAY_SIZE(w89rf242_txvga_old_mapping); j++) { - if (pctmp[i] < (u8) w89rf242_txvga_old_mapping[j][1]) { - pctmp[i] = (u8) w89rf242_txvga_old_mapping[j][0]; - break; - } - } - - if (j == ARRAY_SIZE(w89rf242_txvga_old_mapping)) - pctmp[i] = (u8)w89rf242_txvga_old_mapping[j-1][0]; - } - } - - memcpy(pHwData->TxVgaSettingInEEPROM, pctmp, MAX_TXVGA_EEPROM * 2); /* MAX_TXVGA_EEPROM is u16 count */ - EEPROMTxVgaAdjust(pHwData); -} - -/* - * This function will affect the TxVga parameter in HAL. If hal_set_current_channel - * or RFSynthesizer_SetPowerIndex be called, new TxVga will take effect. - * TxVgaSettingInEEPROM of sHwData is an u8 array point to EEPROM contain for IS89C35 - * This function will use default TxVgaSettingInEEPROM data to calculate new TxVga. - */ -void EEPROMTxVgaAdjust(struct hw_data *pHwData) -{ - u8 *pTxVga = pHwData->TxVgaSettingInEEPROM; - s16 i, stmp; - - /* -- 2.4G -- */ - /* channel 1 ~ 5 */ - stmp = pTxVga[1] - pTxVga[0]; - for (i = 0; i < 5; i++) - pHwData->TxVgaFor24[i] = pTxVga[0] + stmp * i / 4; - /* channel 6 ~ 10 */ - stmp = pTxVga[2] - pTxVga[1]; - for (i = 5; i < 10; i++) - pHwData->TxVgaFor24[i] = pTxVga[1] + stmp * (i - 5) / 4; - /* channel 11 ~ 13 */ - stmp = pTxVga[3] - pTxVga[2]; - for (i = 10; i < 13; i++) - pHwData->TxVgaFor24[i] = pTxVga[2] + stmp * (i - 10) / 2; - /* channel 14 */ - pHwData->TxVgaFor24[13] = pTxVga[3]; - - /* -- 5G -- */ - if (pHwData->phy_type == RF_AIROHA_7230) { - /* channel 184 */ - pHwData->TxVgaFor50[0].ChanNo = 184; - pHwData->TxVgaFor50[0].TxVgaValue = pTxVga[4]; - /* channel 196 */ - pHwData->TxVgaFor50[3].ChanNo = 196; - pHwData->TxVgaFor50[3].TxVgaValue = pTxVga[5]; - /* interpolate */ - pHwData->TxVgaFor50[1].ChanNo = 188; - pHwData->TxVgaFor50[2].ChanNo = 192; - stmp = pTxVga[5] - pTxVga[4]; - pHwData->TxVgaFor50[2].TxVgaValue = pTxVga[5] - stmp / 3; - pHwData->TxVgaFor50[1].TxVgaValue = pTxVga[5] - stmp * 2 / 3; - - /* channel 16 */ - pHwData->TxVgaFor50[6].ChanNo = 16; - pHwData->TxVgaFor50[6].TxVgaValue = pTxVga[6]; - pHwData->TxVgaFor50[4].ChanNo = 8; - pHwData->TxVgaFor50[4].TxVgaValue = pTxVga[6]; - pHwData->TxVgaFor50[5].ChanNo = 12; - pHwData->TxVgaFor50[5].TxVgaValue = pTxVga[6]; - - /* channel 36 */ - pHwData->TxVgaFor50[8].ChanNo = 36; - pHwData->TxVgaFor50[8].TxVgaValue = pTxVga[7]; - pHwData->TxVgaFor50[7].ChanNo = 34; - pHwData->TxVgaFor50[7].TxVgaValue = pTxVga[7]; - pHwData->TxVgaFor50[9].ChanNo = 38; - pHwData->TxVgaFor50[9].TxVgaValue = pTxVga[7]; - - /* channel 40 */ - pHwData->TxVgaFor50[10].ChanNo = 40; - pHwData->TxVgaFor50[10].TxVgaValue = pTxVga[8]; - /* channel 48 */ - pHwData->TxVgaFor50[14].ChanNo = 48; - pHwData->TxVgaFor50[14].TxVgaValue = pTxVga[9]; - /* interpolate */ - pHwData->TxVgaFor50[11].ChanNo = 42; - pHwData->TxVgaFor50[12].ChanNo = 44; - pHwData->TxVgaFor50[13].ChanNo = 46; - stmp = pTxVga[9] - pTxVga[8]; - pHwData->TxVgaFor50[13].TxVgaValue = pTxVga[9] - stmp / 4; - pHwData->TxVgaFor50[12].TxVgaValue = pTxVga[9] - stmp * 2 / 4; - pHwData->TxVgaFor50[11].TxVgaValue = pTxVga[9] - stmp * 3 / 4; - - /* channel 52 */ - pHwData->TxVgaFor50[15].ChanNo = 52; - pHwData->TxVgaFor50[15].TxVgaValue = pTxVga[10]; - /* channel 64 */ - pHwData->TxVgaFor50[18].ChanNo = 64; - pHwData->TxVgaFor50[18].TxVgaValue = pTxVga[11]; - /* interpolate */ - pHwData->TxVgaFor50[16].ChanNo = 56; - pHwData->TxVgaFor50[17].ChanNo = 60; - stmp = pTxVga[11] - pTxVga[10]; - pHwData->TxVgaFor50[17].TxVgaValue = pTxVga[11] - stmp / 3; - pHwData->TxVgaFor50[16].TxVgaValue = pTxVga[11] - stmp * 2 / 3; - - /* channel 100 */ - pHwData->TxVgaFor50[19].ChanNo = 100; - pHwData->TxVgaFor50[19].TxVgaValue = pTxVga[12]; - /* channel 112 */ - pHwData->TxVgaFor50[22].ChanNo = 112; - pHwData->TxVgaFor50[22].TxVgaValue = pTxVga[13]; - /* interpolate */ - pHwData->TxVgaFor50[20].ChanNo = 104; - pHwData->TxVgaFor50[21].ChanNo = 108; - stmp = pTxVga[13] - pTxVga[12]; - pHwData->TxVgaFor50[21].TxVgaValue = pTxVga[13] - stmp / 3; - pHwData->TxVgaFor50[20].TxVgaValue = pTxVga[13] - stmp * 2 / 3; - - /* channel 128 */ - pHwData->TxVgaFor50[26].ChanNo = 128; - pHwData->TxVgaFor50[26].TxVgaValue = pTxVga[14]; - /* interpolate */ - pHwData->TxVgaFor50[23].ChanNo = 116; - pHwData->TxVgaFor50[24].ChanNo = 120; - pHwData->TxVgaFor50[25].ChanNo = 124; - stmp = pTxVga[14] - pTxVga[13]; - pHwData->TxVgaFor50[25].TxVgaValue = pTxVga[14] - stmp / 4; - pHwData->TxVgaFor50[24].TxVgaValue = pTxVga[14] - stmp * 2 / 4; - pHwData->TxVgaFor50[23].TxVgaValue = pTxVga[14] - stmp * 3 / 4; - - /* channel 140 */ - pHwData->TxVgaFor50[29].ChanNo = 140; - pHwData->TxVgaFor50[29].TxVgaValue = pTxVga[15]; - /* interpolate */ - pHwData->TxVgaFor50[27].ChanNo = 132; - pHwData->TxVgaFor50[28].ChanNo = 136; - stmp = pTxVga[15] - pTxVga[14]; - pHwData->TxVgaFor50[28].TxVgaValue = pTxVga[15] - stmp / 3; - pHwData->TxVgaFor50[27].TxVgaValue = pTxVga[15] - stmp * 2 / 3; - - /* channel 149 */ - pHwData->TxVgaFor50[30].ChanNo = 149; - pHwData->TxVgaFor50[30].TxVgaValue = pTxVga[16]; - /* channel 165 */ - pHwData->TxVgaFor50[34].ChanNo = 165; - pHwData->TxVgaFor50[34].TxVgaValue = pTxVga[17]; - /* interpolate */ - pHwData->TxVgaFor50[31].ChanNo = 153; - pHwData->TxVgaFor50[32].ChanNo = 157; - pHwData->TxVgaFor50[33].ChanNo = 161; - stmp = pTxVga[17] - pTxVga[16]; - pHwData->TxVgaFor50[33].TxVgaValue = pTxVga[17] - stmp / 4; - pHwData->TxVgaFor50[32].TxVgaValue = pTxVga[17] - stmp * 2 / 4; - pHwData->TxVgaFor50[31].TxVgaValue = pTxVga[17] - stmp * 3 / 4; - } -} - -void BBProcessor_RateChanging(struct hw_data *pHwData, u8 rate) -{ - struct wb35_reg *reg = &pHwData->reg; - unsigned char Is11bRate; - - Is11bRate = (rate % 6) ? 1 : 0; - switch (pHwData->phy_type) { - case RF_AIROHA_2230: - case RF_AIROHA_2230S: - if (Is11bRate) { - if ((reg->BB48 != BB48_DEFAULT_AL2230_11B) && - (reg->BB4C != BB4C_DEFAULT_AL2230_11B)) { - Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_AL2230_11B); - Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_AL2230_11B); - } - } else { - if ((reg->BB48 != BB48_DEFAULT_AL2230_11G) && - (reg->BB4C != BB4C_DEFAULT_AL2230_11G)) { - Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_AL2230_11G); - Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_AL2230_11G); - } - } - break; - case RF_WB_242: - if (Is11bRate) { - if ((reg->BB48 != BB48_DEFAULT_WB242_11B) && - (reg->BB4C != BB4C_DEFAULT_WB242_11B)) { - reg->BB48 = BB48_DEFAULT_WB242_11B; - reg->BB4C = BB4C_DEFAULT_WB242_11B; - Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_WB242_11B); - Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_WB242_11B); - } - } else { - if ((reg->BB48 != BB48_DEFAULT_WB242_11G) && - (reg->BB4C != BB4C_DEFAULT_WB242_11G)) { - reg->BB48 = BB48_DEFAULT_WB242_11G; - reg->BB4C = BB4C_DEFAULT_WB242_11G; - Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_WB242_11G); - Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_WB242_11G); - } - } - break; - } -} - diff --git a/drivers/staging/winbond/sme_api.h b/drivers/staging/winbond/sme_api.h deleted file mode 100644 index 652ae70..0000000 --- a/drivers/staging/winbond/sme_api.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - * sme_api.h - * - * Copyright(C) 2002 Winbond Electronics Corp. - */ - -#ifndef __SME_API_H__ -#define __SME_API_H__ - -#include <linux/types.h> - -#include "localpara.h" - -/****************** CONSTANT AND MACRO SECTION ******************************/ - -#define MEDIA_STATE_DISCONNECTED 0 -#define MEDIA_STATE_CONNECTED 1 - -/* ARRAY CHECK */ -#define MAX_POWER_TO_DB 32 - -/****************** TYPE DEFINITION SECTION *********************************/ - -/****************** EXPORTED FUNCTION DECLARATION SECTION *******************/ - -/* OID_802_11_BSSID */ -s8 sme_get_bssid(void *pcore_data, u8 *pbssid); -s8 sme_get_desired_bssid(void *pcore_data, u8 *pbssid); /* Unused */ -s8 sme_set_desired_bssid(void *pcore_data, u8 *pbssid); - -/* OID_802_11_SSID */ -s8 sme_get_ssid(void *pcore_data, u8 *pssid, u8 *pssid_len); -s8 sme_get_desired_ssid(void *pcore_data, u8 *pssid, u8 *pssid_len);/* Unused */ -s8 sme_set_desired_ssid(void *pcore_data, u8 *pssid, u8 ssid_len); - -/* OID_802_11_INFRASTRUCTURE_MODE */ -s8 sme_get_bss_type(void *pcore_data, u8 *pbss_type); -s8 sme_get_desired_bss_type(void *pcore_data, u8 *pbss_type); /* Unused */ -s8 sme_set_desired_bss_type(void *pcore_data, u8 bss_type); - -/* OID_802_11_FRAGMENTATION_THRESHOLD */ -s8 sme_get_fragment_threshold(void *pcore_data, u32 *pthreshold); -s8 sme_set_fragment_threshold(void *pcore_data, u32 threshold); - -/* OID_802_11_RTS_THRESHOLD */ -s8 sme_get_rts_threshold(void *pcore_data, u32 *pthreshold); -s8 sme_set_rts_threshold(void *pcore_data, u32 threshold); - -/* OID_802_11_CONFIGURATION */ -s8 sme_get_beacon_period(void *pcore_data, u16 *pbeacon_period); -s8 sme_set_beacon_period(void *pcore_data, u16 beacon_period); - -s8 sme_get_atim_window(void *pcore_data, u16 *patim_window); -s8 sme_set_atim_window(void *pcore_data, u16 atim_window); - -s8 sme_get_current_channel(void *pcore_data, u8 *pcurrent_channel); -s8 sme_get_current_band(void *pcore_data, u8 *pcurrent_band); -s8 sme_set_current_channel(void *pcore_data, u8 current_channel); - -/* OID_802_11_BSSID_LIST */ -s8 sme_get_scan_bss_count(void *pcore_data, u8 *pcount); -s8 sme_get_scan_bss(void *pcore_data, u8 index, void **ppbss); - -s8 sme_get_connected_bss(void *pcore_data, void **ppbss_now); - -/* OID_802_11_AUTHENTICATION_MODE */ -s8 sme_get_auth_mode(void *pcore_data, u8 *pauth_mode); -s8 sme_set_auth_mode(void *pcore_data, u8 auth_mode); - -/* OID_802_11_WEP_STATUS / OID_802_11_ENCRYPTION_STATUS */ -s8 sme_get_wep_mode(void *pcore_data, u8 *pwep_mode); -s8 sme_set_wep_mode(void *pcore_data, u8 wep_mode); - -/* OID_GEN_VENDOR_ID */ -/* OID_802_3_PERMANENT_ADDRESS */ -s8 sme_get_permanent_mac_addr(void *pcore_data, u8 *pmac_addr); - -/* OID_802_3_CURRENT_ADDRESS */ -s8 sme_get_current_mac_addr(void *pcore_data, u8 *pmac_addr); - -/* OID_802_11_NETWORK_TYPE_IN_USE */ -s8 sme_get_network_type_in_use(void *pcore_data, u8 *ptype); -s8 sme_set_network_type_in_use(void *pcore_data, u8 type); - -/* OID_802_11_SUPPORTED_RATES */ -s8 sme_get_supported_rate(void *pcore_data, u8 *prates); - -/* OID_802_11_ADD_WEP */ -s8 sme_set_add_wep(void *pcore_data, u32 key_index, u32 key_len, - u8 *Address, u8 *key); - -/* OID_802_11_REMOVE_WEP */ -s8 sme_set_remove_wep(void *pcre_data, u32 key_index); - -/* OID_802_11_DISASSOCIATE */ -s8 sme_set_disassociate(void *pcore_data); - -/* OID_802_11_POWER_MODE */ -s8 sme_get_power_mode(void *pcore_data, u8 *pmode); -s8 sme_set_power_mode(void *pcore_data, u8 mode); - -/* OID_802_11_BSSID_LIST_SCAN */ -s8 sme_set_bssid_list_scan(void *pcore_data, void *pscan_para); - -/* OID_802_11_RELOAD_DEFAULTS */ -s8 sme_set_reload_defaults(void *pcore_data, u8 reload_type); - - -/*------------------------- non-standard ----------------------------------*/ -s8 sme_get_connect_status(void *pcore_data, u8 *pstatus); -/*--------------------------------------------------------------------------*/ - -void sme_get_encryption_status(void *pcore_data, u8 *EncryptStatus); -void sme_set_encryption_status(void *pcore_data, u8 EncryptStatus); -s8 sme_add_key(void *pcore_data, - u32 key_index, - u8 key_len, - u8 key_type, - u8 *key_bssid, - u8 *ptx_tsc, - u8 *prx_tsc, - u8 *key_material); -void sme_remove_default_key(void *pcore_data, int index); -void sme_remove_mapping_key(void *pcore_data, u8 *pmac_addr); -void sme_clear_all_mapping_key(void *pcore_data); -void sme_clear_all_default_key(void *pcore_data); - - - -s8 sme_set_preamble_mode(void *pcore_data, u8 mode); -s8 sme_get_preamble_mode(void *pcore_data, u8 *mode); -s8 sme_get_preamble_type(void *pcore_data, u8 *type); -s8 sme_set_slottime_mode(void *pcore_data, u8 mode); -s8 sme_get_slottime_mode(void *pcore_data, u8 *mode); -s8 sme_get_slottime_type(void *pcore_data, u8 *type); -s8 sme_set_txrate_policy(void *pcore_data, u8 policy); -s8 sme_get_txrate_policy(void *pcore_data, u8 *policy); -s8 sme_get_cwmin_value(void *pcore_data, u8 *cwmin); -s8 sme_get_cwmax_value(void *pcore_data, u16 *cwmax); -s8 sme_get_ms_radio_mode(void *pcore_data, u8 *pMsRadioOff); -s8 sme_set_ms_radio_mode(void *pcore_data, u8 boMsRadioOff); - -void sme_get_tx_power_level(void *pcore_data, u32 *TxPower); -u8 sme_set_tx_power_level(void *pcore_data, u32 TxPower); -void sme_get_antenna_count(void *pcore_data, u32 *AntennaCount); -void sme_get_rx_antenna(void *pcore_data, u32 *RxAntenna); -u8 sme_set_rx_antenna(void *pcore_data, u32 RxAntenna); -void sme_get_tx_antenna(void *pcore_data, u32 *TxAntenna); -s8 sme_set_tx_antenna(void *pcore_data, u32 TxAntenna); -s8 sme_set_IBSS_chan(void *pcore_data, struct chan_info chan); -s8 sme_set_IE_append(void *pcore_data, u8 *buffer, u16 buf_len); - -/* ================== Local functions ====================== */ -static const u32 PowerDbToMw[] = { - 56, /* mW, MAX - 0, 17.5 dbm */ - 40, /* mW, MAX - 1, 16.0 dbm */ - 30, /* mW, MAX - 2, 14.8 dbm */ - 20, /* mW, MAX - 3, 13.0 dbm */ - 15, /* mW, MAX - 4, 11.8 dbm */ - 12, /* mW, MAX - 5, 10.6 dbm */ - 9, /* mW, MAX - 6, 9.4 dbm */ - 7, /* mW, MAX - 7, 8.3 dbm */ - 5, /* mW, MAX - 8, 6.4 dbm */ - 4, /* mW, MAX - 9, 5.3 dbm */ - 3, /* mW, MAX - 10, 4.0 dbm */ - 2, /* mW, MAX - 11, ? dbm */ - 2, /* mW, MAX - 12, ? dbm */ - 2, /* mW, MAX - 13, ? dbm */ - 2, /* mW, MAX - 14, ? dbm */ - 2, /* mW, MAX - 15, ? dbm */ - 2, /* mW, MAX - 16, ? dbm */ - 2, /* mW, MAX - 17, ? dbm */ - 2, /* mW, MAX - 18, ? dbm */ - 1, /* mW, MAX - 19, ? dbm */ - 1, /* mW, MAX - 20, ? dbm */ - 1, /* mW, MAX - 21, ? dbm */ - 1, /* mW, MAX - 22, ? dbm */ - 1, /* mW, MAX - 23, ? dbm */ - 1, /* mW, MAX - 24, ? dbm */ - 1, /* mW, MAX - 25, ? dbm */ - 1, /* mW, MAX - 26, ? dbm */ - 1, /* mW, MAX - 27, ? dbm */ - 1, /* mW, MAX - 28, ? dbm */ - 1, /* mW, MAX - 29, ? dbm */ - 1, /* mW, MAX - 30, ? dbm */ - 1 /* mW, MAX - 31, ? dbm */ -}; - -#endif /* __SME_API_H__ */ - - diff --git a/drivers/staging/winbond/wb35reg.c b/drivers/staging/winbond/wb35reg.c deleted file mode 100644 index bbc5ddc..0000000 --- a/drivers/staging/winbond/wb35reg.c +++ /dev/null @@ -1,806 +0,0 @@ -#include "wb35reg_f.h" -#include "phy_calibration.h" - -#include <linux/usb.h> -#include <linux/slab.h> - -/* - * true : read command process successfully - * false : register not support - * RegisterNo : start base - * pRegisterData : data point - * NumberOfData : number of register data - * Flag : AUTO_INCREMENT - RegisterNo will auto increment 4 - * NO_INCREMENT - Function will write data into the same register - */ -unsigned char Wb35Reg_BurstWrite(struct hw_data *pHwData, u16 RegisterNo, - u32 *pRegisterData, u8 NumberOfData, u8 Flag) -{ - struct wb35_reg *reg = &pHwData->reg; - struct urb *urb = NULL; - struct wb35_reg_queue *reg_queue = NULL; - u16 UrbSize; - struct usb_ctrlrequest *dr; - u16 i, DataSize = NumberOfData * 4; - - /* Module shutdown */ - if (pHwData->SurpriseRemove) - return false; - - /* Trying to use burst write function if use new hardware */ - UrbSize = sizeof(struct wb35_reg_queue) + DataSize + sizeof(struct usb_ctrlrequest); - reg_queue = kzalloc(UrbSize, GFP_ATOMIC); - if (reg_queue == NULL) - return false; - - urb = usb_alloc_urb(0, GFP_ATOMIC); - if (urb == NULL) { - kfree(reg_queue); - return false; - } - - reg_queue->DIRECT = 2; /* burst write register */ - reg_queue->INDEX = RegisterNo; - reg_queue->pBuffer = (u32 *)((u8 *)reg_queue + sizeof(struct wb35_reg_queue)); - memcpy(reg_queue->pBuffer, pRegisterData, DataSize); - /* the function for reversing register data from little endian to big endian */ - for (i = 0; i < NumberOfData; i++) - reg_queue->pBuffer[i] = cpu_to_le32(reg_queue->pBuffer[i]); - - dr = (struct usb_ctrlrequest *)((u8 *)reg_queue + sizeof(struct wb35_reg_queue) + DataSize); - dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE; - dr->bRequest = 0x04; /* USB or vendor-defined request code, burst mode */ - dr->wValue = cpu_to_le16(Flag); /* 0: Register number auto-increment, 1: No auto increment */ - dr->wIndex = cpu_to_le16(RegisterNo); - dr->wLength = cpu_to_le16(DataSize); - reg_queue->Next = NULL; - reg_queue->pUsbReq = dr; - reg_queue->urb = urb; - - spin_lock_irq(®->EP0VM_spin_lock); - if (reg->reg_first == NULL) - reg->reg_first = reg_queue; - else - reg->reg_last->Next = reg_queue; - reg->reg_last = reg_queue; - - spin_unlock_irq(®->EP0VM_spin_lock); - - /* Start EP0VM */ - Wb35Reg_EP0VM_start(pHwData); - - return true; -} - -void Wb35Reg_Update(struct hw_data *pHwData, u16 RegisterNo, u32 RegisterValue) -{ - struct wb35_reg *reg = &pHwData->reg; - switch (RegisterNo) { - case 0x3b0: - reg->U1B0 = RegisterValue; - break; - case 0x3bc: - reg->U1BC_LEDConfigure = RegisterValue; - break; - case 0x400: - reg->D00_DmaControl = RegisterValue; - break; - case 0x800: - reg->M00_MacControl = RegisterValue; - break; - case 0x804: - reg->M04_MulticastAddress1 = RegisterValue; - break; - case 0x808: - reg->M08_MulticastAddress2 = RegisterValue; - break; - case 0x824: - reg->M24_MacControl = RegisterValue; - break; - case 0x828: - reg->M28_MacControl = RegisterValue; - break; - case 0x82c: - reg->M2C_MacControl = RegisterValue; - break; - case 0x838: - reg->M38_MacControl = RegisterValue; - break; - case 0x840: - reg->M40_MacControl = RegisterValue; - break; - case 0x844: - reg->M44_MacControl = RegisterValue; - break; - case 0x848: - reg->M48_MacControl = RegisterValue; - break; - case 0x84c: - reg->M4C_MacStatus = RegisterValue; - break; - case 0x860: - reg->M60_MacControl = RegisterValue; - break; - case 0x868: - reg->M68_MacControl = RegisterValue; - break; - case 0x870: - reg->M70_MacControl = RegisterValue; - break; - case 0x874: - reg->M74_MacControl = RegisterValue; - break; - case 0x878: - reg->M78_ERPInformation = RegisterValue; - break; - case 0x87C: - reg->M7C_MacControl = RegisterValue; - break; - case 0x880: - reg->M80_MacControl = RegisterValue; - break; - case 0x884: - reg->M84_MacControl = RegisterValue; - break; - case 0x888: - reg->M88_MacControl = RegisterValue; - break; - case 0x898: - reg->M98_MacControl = RegisterValue; - break; - case 0x100c: - reg->BB0C = RegisterValue; - break; - case 0x102c: - reg->BB2C = RegisterValue; - break; - case 0x1030: - reg->BB30 = RegisterValue; - break; - case 0x103c: - reg->BB3C = RegisterValue; - break; - case 0x1048: - reg->BB48 = RegisterValue; - break; - case 0x104c: - reg->BB4C = RegisterValue; - break; - case 0x1050: - reg->BB50 = RegisterValue; - break; - case 0x1054: - reg->BB54 = RegisterValue; - break; - case 0x1058: - reg->BB58 = RegisterValue; - break; - case 0x105c: - reg->BB5C = RegisterValue; - break; - case 0x1060: - reg->BB60 = RegisterValue; - break; - } -} - -/* - * true : read command process successfully - * false : register not support - */ -unsigned char Wb35Reg_WriteSync(struct hw_data *pHwData, u16 RegisterNo, - u32 RegisterValue) -{ - struct wb35_reg *reg = &pHwData->reg; - int ret = -1; - - /* Module shutdown */ - if (pHwData->SurpriseRemove) - return false; - - RegisterValue = cpu_to_le32(RegisterValue); - - /* update the register by send usb message */ - reg->SyncIoPause = 1; - - /* Wait until EP0VM stop */ - while (reg->EP0vm_state != VM_STOP) - msleep(10); - - /* Sync IoCallDriver */ - reg->EP0vm_state = VM_RUNNING; - ret = usb_control_msg(pHwData->udev, - usb_sndctrlpipe(pHwData->udev, 0), - 0x03, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - 0x0, RegisterNo, &RegisterValue, 4, HZ * 100); - reg->EP0vm_state = VM_STOP; - reg->SyncIoPause = 0; - - Wb35Reg_EP0VM_start(pHwData); - - if (ret < 0) { - pr_debug("EP0 Write register usb message sending error\n"); - pHwData->SurpriseRemove = 1; - return false; - } - return true; -} - -/* - * true : read command process successfully - * false : register not support - */ -unsigned char Wb35Reg_Write(struct hw_data *pHwData, u16 RegisterNo, - u32 RegisterValue) -{ - struct wb35_reg *reg = &pHwData->reg; - struct usb_ctrlrequest *dr; - struct urb *urb = NULL; - struct wb35_reg_queue *reg_queue = NULL; - u16 UrbSize; - - /* Module shutdown */ - if (pHwData->SurpriseRemove) - return false; - - /* update the register by send urb request */ - UrbSize = sizeof(struct wb35_reg_queue) + sizeof(struct usb_ctrlrequest); - reg_queue = kzalloc(UrbSize, GFP_ATOMIC); - if (reg_queue == NULL) - return false; - - urb = usb_alloc_urb(0, GFP_ATOMIC); - if (urb == NULL) { - kfree(reg_queue); - return false; - } - - reg_queue->DIRECT = 1; /* burst write register */ - reg_queue->INDEX = RegisterNo; - reg_queue->VALUE = cpu_to_le32(RegisterValue); - reg_queue->RESERVED_VALID = false; - dr = (struct usb_ctrlrequest *)((u8 *)reg_queue + sizeof(struct wb35_reg_queue)); - dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE; - dr->bRequest = 0x03; /* USB or vendor-defined request code, burst mode */ - dr->wValue = cpu_to_le16(0x0); - dr->wIndex = cpu_to_le16(RegisterNo); - dr->wLength = cpu_to_le16(4); - - /* Enter the sending queue */ - reg_queue->Next = NULL; - reg_queue->pUsbReq = dr; - reg_queue->urb = urb; - - spin_lock_irq(®->EP0VM_spin_lock); - if (reg->reg_first == NULL) - reg->reg_first = reg_queue; - else - reg->reg_last->Next = reg_queue; - reg->reg_last = reg_queue; - - spin_unlock_irq(®->EP0VM_spin_lock); - - /* Start EP0VM */ - Wb35Reg_EP0VM_start(pHwData); - - return true; -} - -/* - * This command will be executed with a user defined value. When it completes, - * this value is useful. For example, hal_set_current_channel will use it. - * true : read command process successfully - * false : register not supported - */ -unsigned char Wb35Reg_WriteWithCallbackValue(struct hw_data *pHwData, - u16 RegisterNo, - u32 RegisterValue, - s8 *pValue, - s8 Len) -{ - struct wb35_reg *reg = &pHwData->reg; - struct usb_ctrlrequest *dr; - struct urb *urb = NULL; - struct wb35_reg_queue *reg_queue = NULL; - u16 UrbSize; - - /* Module shutdown */ - if (pHwData->SurpriseRemove) - return false; - - /* update the register by send urb request */ - UrbSize = sizeof(struct wb35_reg_queue) + sizeof(struct usb_ctrlrequest); - reg_queue = kzalloc(UrbSize, GFP_ATOMIC); - if (reg_queue == NULL) - return false; - - urb = usb_alloc_urb(0, GFP_ATOMIC); - if (urb == NULL) { - kfree(reg_queue); - return false; - } - - reg_queue->DIRECT = 1; /* burst write register */ - reg_queue->INDEX = RegisterNo; - reg_queue->VALUE = cpu_to_le32(RegisterValue); - /* NOTE : Users must guarantee the size of value will not exceed the buffer size. */ - memcpy(reg_queue->RESERVED, pValue, Len); - reg_queue->RESERVED_VALID = true; - dr = (struct usb_ctrlrequest *)((u8 *)reg_queue + sizeof(struct wb35_reg_queue)); - dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE; - dr->bRequest = 0x03; /* USB or vendor-defined request code, burst mode */ - dr->wValue = cpu_to_le16(0x0); - dr->wIndex = cpu_to_le16(RegisterNo); - dr->wLength = cpu_to_le16(4); - - /* Enter the sending queue */ - reg_queue->Next = NULL; - reg_queue->pUsbReq = dr; - reg_queue->urb = urb; - spin_lock_irq(®->EP0VM_spin_lock); - if (reg->reg_first == NULL) - reg->reg_first = reg_queue; - else - reg->reg_last->Next = reg_queue; - reg->reg_last = reg_queue; - - spin_unlock_irq(®->EP0VM_spin_lock); - - /* Start EP0VM */ - Wb35Reg_EP0VM_start(pHwData); - - return true; -} - -/* - * true : read command process successfully - * false : register not support - * pRegisterValue : It must be a resident buffer due to - * asynchronous read register. - */ -unsigned char Wb35Reg_ReadSync(struct hw_data *pHwData, u16 RegisterNo, - u32 *pRegisterValue) -{ - struct wb35_reg *reg = &pHwData->reg; - u32 *pltmp = pRegisterValue; - int ret = -1; - - /* Module shutdown */ - if (pHwData->SurpriseRemove) - return false; - - /* Read the register by send usb message */ - reg->SyncIoPause = 1; - - /* Wait until EP0VM stop */ - while (reg->EP0vm_state != VM_STOP) - msleep(10); - - reg->EP0vm_state = VM_RUNNING; - ret = usb_control_msg(pHwData->udev, - usb_rcvctrlpipe(pHwData->udev, 0), - 0x01, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x0, RegisterNo, pltmp, 4, HZ * 100); - - *pRegisterValue = cpu_to_le32(*pltmp); - - reg->EP0vm_state = VM_STOP; - - Wb35Reg_Update(pHwData, RegisterNo, *pRegisterValue); - reg->SyncIoPause = 0; - - Wb35Reg_EP0VM_start(pHwData); - - if (ret < 0) { - pr_debug("EP0 Read register usb message sending error\n"); - pHwData->SurpriseRemove = 1; - return false; - } - return true; -} - -/* - * true : read command process successfully - * false : register not support - * pRegisterValue : It must be a resident buffer due to - * asynchronous read register. - */ -unsigned char Wb35Reg_Read(struct hw_data *pHwData, u16 RegisterNo, - u32 *pRegisterValue) -{ - struct wb35_reg *reg = &pHwData->reg; - struct usb_ctrlrequest *dr; - struct urb *urb; - struct wb35_reg_queue *reg_queue; - u16 UrbSize; - - /* Module shutdown */ - if (pHwData->SurpriseRemove) - return false; - - /* update the variable by send Urb to read register */ - UrbSize = sizeof(struct wb35_reg_queue) + sizeof(struct usb_ctrlrequest); - reg_queue = kzalloc(UrbSize, GFP_ATOMIC); - if (reg_queue == NULL) - return false; - - urb = usb_alloc_urb(0, GFP_ATOMIC); - if (urb == NULL) { - kfree(reg_queue); - return false; - } - reg_queue->DIRECT = 0; /* read register */ - reg_queue->INDEX = RegisterNo; - reg_queue->pBuffer = pRegisterValue; - dr = (struct usb_ctrlrequest *)((u8 *)reg_queue + sizeof(struct wb35_reg_queue)); - dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN; - dr->bRequest = 0x01; /* USB or vendor-defined request code, burst mode */ - dr->wValue = cpu_to_le16(0x0); - dr->wIndex = cpu_to_le16(RegisterNo); - dr->wLength = cpu_to_le16(4); - - /* Enter the sending queue */ - reg_queue->Next = NULL; - reg_queue->pUsbReq = dr; - reg_queue->urb = urb; - spin_lock_irq(®->EP0VM_spin_lock); - if (reg->reg_first == NULL) - reg->reg_first = reg_queue; - else - reg->reg_last->Next = reg_queue; - reg->reg_last = reg_queue; - - spin_unlock_irq(®->EP0VM_spin_lock); - - /* Start EP0VM */ - Wb35Reg_EP0VM_start(pHwData); - - return true; -} - - -void Wb35Reg_EP0VM_start(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (atomic_inc_return(®->RegFireCount) == 1) { - reg->EP0vm_state = VM_RUNNING; - Wb35Reg_EP0VM(pHwData); - } else - atomic_dec(®->RegFireCount); -} - -void Wb35Reg_EP0VM(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - struct urb *urb; - struct usb_ctrlrequest *dr; - u32 *pBuffer; - int ret = -1; - struct wb35_reg_queue *reg_queue; - - - if (reg->SyncIoPause) - goto cleanup; - - if (pHwData->SurpriseRemove) - goto cleanup; - - /* Get the register data and send to USB through Irp */ - spin_lock_irq(®->EP0VM_spin_lock); - reg_queue = reg->reg_first; - spin_unlock_irq(®->EP0VM_spin_lock); - - if (!reg_queue) - goto cleanup; - - /* Get an Urb, send it */ - urb = (struct urb *)reg_queue->urb; - - dr = reg_queue->pUsbReq; - urb = reg_queue->urb; - pBuffer = reg_queue->pBuffer; - if (reg_queue->DIRECT == 1) /* output */ - pBuffer = ®_queue->VALUE; - - usb_fill_control_urb(urb, pHwData->udev, - REG_DIRECTION(pHwData->udev, reg_queue), - (u8 *)dr, pBuffer, cpu_to_le16(dr->wLength), - Wb35Reg_EP0VM_complete, (void *)pHwData); - - reg->EP0vm_state = VM_RUNNING; - - ret = usb_submit_urb(urb, GFP_ATOMIC); - - if (ret < 0) { - pr_debug("EP0 Irp sending error\n"); - goto cleanup; - } - return; - - cleanup: - reg->EP0vm_state = VM_STOP; - atomic_dec(®->RegFireCount); -} - - -void Wb35Reg_EP0VM_complete(struct urb *urb) -{ - struct hw_data *pHwData = (struct hw_data *)urb->context; - struct wb35_reg *reg = &pHwData->reg; - struct wb35_reg_queue *reg_queue; - - - /* Variable setting */ - reg->EP0vm_state = VM_COMPLETED; - reg->EP0VM_status = urb->status; - - if (pHwData->SurpriseRemove) { /* Let WbWlanHalt to handle surprise remove */ - reg->EP0vm_state = VM_STOP; - atomic_dec(®->RegFireCount); - } else { - /* Complete to send, remove the URB from the first */ - spin_lock_irq(®->EP0VM_spin_lock); - reg_queue = reg->reg_first; - if (reg_queue == reg->reg_last) - reg->reg_last = NULL; - reg->reg_first = reg->reg_first->Next; - spin_unlock_irq(®->EP0VM_spin_lock); - - if (reg->EP0VM_status) { - pr_debug("EP0 IoCompleteRoutine return error\n"); - reg->EP0vm_state = VM_STOP; - pHwData->SurpriseRemove = 1; - } else { - /* Success. Update the result */ - - /* Start the next send */ - Wb35Reg_EP0VM(pHwData); - } - - kfree(reg_queue); - } - - usb_free_urb(urb); -} - - -void Wb35Reg_destroy(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - struct urb *urb; - struct wb35_reg_queue *reg_queue; - - Uxx_power_off_procedure(pHwData); - - /* Wait for Reg operation completed */ - do { - msleep(10); /* Delay for waiting function enter */ - } while (reg->EP0vm_state != VM_STOP); - msleep(10); /* Delay for waiting function enter */ - - /* Release all the data in RegQueue */ - spin_lock_irq(®->EP0VM_spin_lock); - reg_queue = reg->reg_first; - while (reg_queue) { - if (reg_queue == reg->reg_last) - reg->reg_last = NULL; - reg->reg_first = reg->reg_first->Next; - - urb = reg_queue->urb; - spin_unlock_irq(®->EP0VM_spin_lock); - if (urb) { - usb_free_urb(urb); - kfree(reg_queue); - } else { - pr_debug("EP0 queue release error\n"); - } - spin_lock_irq(®->EP0VM_spin_lock); - - reg_queue = reg->reg_first; - } - spin_unlock_irq(®->EP0VM_spin_lock); -} - -/* - * ======================================================================= - * The function can be run in passive-level only. - * ========================================================================= - */ -unsigned char Wb35Reg_initial(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - u32 ltmp; - u32 SoftwareSet, VCO_trim, TxVga, Region_ScanInterval; - - /* Spin lock is acquired for read and write IRP command */ - spin_lock_init(®->EP0VM_spin_lock); - - /* Getting RF module type from EEPROM */ - Wb35Reg_WriteSync(pHwData, 0x03b4, 0x080d0000); /* Start EEPROM access + Read + address(0x0d) */ - Wb35Reg_ReadSync(pHwData, 0x03b4, <mp); - - /* Update RF module type and determine the PHY type by inf or EEPROM */ - reg->EEPROMPhyType = (u8)(ltmp & 0xff); - /* - * 0 V MAX2825, 1 V MAX2827, 2 V MAX2828, 3 V MAX2829 - * 16V AL2230, 17 - AL7230, 18 - AL2230S - * 32 Reserved - * 33 - W89RF242(TxVGA 0~19), 34 - W89RF242(TxVGA 0~34) - */ - if (reg->EEPROMPhyType != RF_DECIDE_BY_INF) { - if ((reg->EEPROMPhyType == RF_MAXIM_2825) || - (reg->EEPROMPhyType == RF_MAXIM_2827) || - (reg->EEPROMPhyType == RF_MAXIM_2828) || - (reg->EEPROMPhyType == RF_MAXIM_2829) || - (reg->EEPROMPhyType == RF_MAXIM_V1) || - (reg->EEPROMPhyType == RF_AIROHA_2230) || - (reg->EEPROMPhyType == RF_AIROHA_2230S) || - (reg->EEPROMPhyType == RF_AIROHA_7230) || - (reg->EEPROMPhyType == RF_WB_242) || - (reg->EEPROMPhyType == RF_WB_242_1)) - pHwData->phy_type = reg->EEPROMPhyType; - } - - /* Power On procedure running. The relative parameter will be set according to phy_type */ - Uxx_power_on_procedure(pHwData); - - /* Reading MAC address */ - Uxx_ReadEthernetAddress(pHwData); - - /* Read VCO trim for RF parameter */ - Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08200000); - Wb35Reg_ReadSync(pHwData, 0x03b4, &VCO_trim); - - /* Read Antenna On/Off of software flag */ - Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08210000); - Wb35Reg_ReadSync(pHwData, 0x03b4, &SoftwareSet); - - /* Read TXVGA */ - Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08100000); - Wb35Reg_ReadSync(pHwData, 0x03b4, &TxVga); - - /* Get Scan interval setting from EEPROM offset 0x1c */ - Wb35Reg_WriteSync(pHwData, 0x03b4, 0x081d0000); - Wb35Reg_ReadSync(pHwData, 0x03b4, &Region_ScanInterval); - - /* Update Ethernet address */ - memcpy(pHwData->CurrentMacAddress, pHwData->PermanentMacAddress, ETH_ALEN); - - /* Update software variable */ - pHwData->SoftwareSet = (u16)(SoftwareSet & 0xffff); - TxVga &= 0x000000ff; - pHwData->PowerIndexFromEEPROM = (u8)TxVga; - pHwData->VCO_trim = (u8)VCO_trim & 0xff; - if (pHwData->VCO_trim == 0xff) - pHwData->VCO_trim = 0x28; - - reg->EEPROMRegion = (u8)(Region_ScanInterval >> 8); - if (reg->EEPROMRegion < 1 || reg->EEPROMRegion > 6) - reg->EEPROMRegion = REGION_AUTO; - - /* For Get Tx VGA from EEPROM */ - GetTxVgaFromEEPROM(pHwData); - - /* Set Scan Interval */ - pHwData->Scan_Interval = (u8)(Region_ScanInterval & 0xff) * 10; - if ((pHwData->Scan_Interval == 2550) || (pHwData->Scan_Interval < 10)) /* Is default setting 0xff * 10 */ - pHwData->Scan_Interval = SCAN_MAX_CHNL_TIME; - - /* Initial register */ - RFSynthesizer_initial(pHwData); - - BBProcessor_initial(pHwData); /* Async write, must wait until complete */ - - Wb35Reg_phy_calibration(pHwData); - - Mxx_initial(pHwData); - Dxx_initial(pHwData); - - if (pHwData->SurpriseRemove) - return false; - else - return true; /* Initial fail */ -} - -/* - * ================================================================ - * CardComputeCrc -- - * - * Description: - * Runs the AUTODIN II CRC algorithm on the buffers Buffer length. - * - * Arguments: - * Buffer - the input buffer - * Length - the length of Buffer - * - * Return Value: - * The 32-bit CRC value. - * =================================================================== - */ -u32 CardComputeCrc(u8 *Buffer, u32 Length) -{ - u32 Crc, Carry; - u32 i, j; - u8 CurByte; - - Crc = 0xffffffff; - - for (i = 0; i < Length; i++) { - CurByte = Buffer[i]; - for (j = 0; j < 8; j++) { - Carry = ((Crc & 0x80000000) ? 1 : 0) ^ (CurByte & 0x01); - Crc <<= 1; - CurByte >>= 1; - if (Carry) - Crc = (Crc ^ 0x04c11db6) | Carry; - } - } - return Crc; -} - - -/* - * ================================================================== - * BitReverse -- - * Reverse the bits in the input argument, dwData, which is - * regarded as a string of bits with the length, DataLength. - * - * Arguments: - * dwData : - * DataLength : - * - * Return: - * The converted value. - * ================================================================== - */ -u32 BitReverse(u32 dwData, u32 DataLength) -{ - u32 HalfLength, i, j; - u32 BitA, BitB; - - if (DataLength <= 0) - return 0; /* No conversion is done. */ - dwData = dwData & (0xffffffff >> (32 - DataLength)); - - HalfLength = DataLength / 2; - for (i = 0, j = DataLength - 1; i < HalfLength; i++, j--) { - BitA = GetBit(dwData, i); - BitB = GetBit(dwData, j); - if (BitA && !BitB) { - dwData = ClearBit(dwData, i); - dwData = SetBit(dwData, j); - } else if (!BitA && BitB) { - dwData = SetBit(dwData, i); - dwData = ClearBit(dwData, j); - } else { - /* Do nothing since these two bits are of the save values. */ - } - } - return dwData; -} - -void Wb35Reg_phy_calibration(struct hw_data *pHwData) -{ - u32 BB3c, BB54; - - if ((pHwData->phy_type == RF_WB_242) || - (pHwData->phy_type == RF_WB_242_1)) { - phy_calibration_winbond(pHwData, 2412); /* Sync operation */ - Wb35Reg_ReadSync(pHwData, 0x103c, &BB3c); - Wb35Reg_ReadSync(pHwData, 0x1054, &BB54); - - pHwData->BB3c_cal = BB3c; - pHwData->BB54_cal = BB54; - - RFSynthesizer_initial(pHwData); - BBProcessor_initial(pHwData); /* Async operation */ - - Wb35Reg_WriteSync(pHwData, 0x103c, BB3c); - Wb35Reg_WriteSync(pHwData, 0x1054, BB54); - } -} - - diff --git a/drivers/staging/winbond/wb35reg_f.h b/drivers/staging/winbond/wb35reg_f.h deleted file mode 100644 index 95dc980..0000000 --- a/drivers/staging/winbond/wb35reg_f.h +++ /dev/null @@ -1,65 +0,0 @@ -#ifndef __WINBOND_WB35REG_F_H -#define __WINBOND_WB35REG_F_H - -#include "wbhal.h" - -/* - * ==================================== - * Interface function declare - * ==================================== - */ -unsigned char Wb35Reg_initial(struct hw_data *hw_data); -void Uxx_power_on_procedure(struct hw_data *hw_data); -void Uxx_power_off_procedure(struct hw_data *hw_data); -void Uxx_ReadEthernetAddress(struct hw_data *hw_data); -void Dxx_initial(struct hw_data *hw_data); -void Mxx_initial(struct hw_data *hw_data); -void RFSynthesizer_initial(struct hw_data *hw_data); -void RFSynthesizer_SwitchingChannel(struct hw_data *hw_data, struct chan_info channel); -void BBProcessor_initial(struct hw_data *hw_data); -void BBProcessor_RateChanging(struct hw_data *hw_data, u8 rate); -u8 RFSynthesizer_SetPowerIndex(struct hw_data *hw_data, u8 power_index); -u8 RFSynthesizer_SetMaxim2828_24Power(struct hw_data *, u8 index); -u8 RFSynthesizer_SetMaxim2828_50Power(struct hw_data *, u8 index); -u8 RFSynthesizer_SetMaxim2827_24Power(struct hw_data *, u8 index); -u8 RFSynthesizer_SetMaxim2827_50Power(struct hw_data *, u8 index); -u8 RFSynthesizer_SetMaxim2825Power(struct hw_data *, u8 index); -u8 RFSynthesizer_SetAiroha2230Power(struct hw_data *, u8 index); -u8 RFSynthesizer_SetAiroha7230Power(struct hw_data *, u8 index); -u8 RFSynthesizer_SetWinbond242Power(struct hw_data *, u8 index); -void GetTxVgaFromEEPROM(struct hw_data *hw_data); -void EEPROMTxVgaAdjust(struct hw_data *hw_data); - -#define RFWriteControlData(_A, _V) Wb35Reg_Write(_A, 0x0864, _V) - -void Wb35Reg_destroy(struct hw_data *hw_data); - -unsigned char Wb35Reg_Read(struct hw_data *hw_data, u16 register_no, u32 *register_value); -unsigned char Wb35Reg_ReadSync(struct hw_data *hw_data, u16 register_no, u32 *register_value); -unsigned char Wb35Reg_Write(struct hw_data *hw_data, u16 register_no, u32 register_value); -unsigned char Wb35Reg_WriteSync(struct hw_data *hw_data, u16 register_no, u32 register_value); -unsigned char Wb35Reg_WriteWithCallbackValue(struct hw_data *hw_data, - u16 register_no, - u32 register_value, - s8 *value, - s8 len); -unsigned char Wb35Reg_BurstWrite(struct hw_data *hw_data, - u16 register_no, - u32 *register_data, - u8 number_of_data, - u8 flag); - -void Wb35Reg_EP0VM(struct hw_data *hw_data); -void Wb35Reg_EP0VM_start(struct hw_data *hw_data); -void Wb35Reg_EP0VM_complete(struct urb *urb); - -u32 BitReverse(u32 data, u32 data_length); - -void CardGetMulticastBit(u8 address[MAC_ADDR_LENGTH], u8 *byte, u8 *value); -u32 CardComputeCrc(u8 *buffer, u32 length); - -void Wb35Reg_phy_calibration(struct hw_data *hw_data); -void Wb35Reg_Update(struct hw_data *hw_data, u16 register_no, u32 register_value); -unsigned char adjust_TXVGA_for_iq_mag(struct hw_data *hw_data); - -#endif diff --git a/drivers/staging/winbond/wb35reg_s.h b/drivers/staging/winbond/wb35reg_s.h deleted file mode 100644 index dc79faa..0000000 --- a/drivers/staging/winbond/wb35reg_s.h +++ /dev/null @@ -1,240 +0,0 @@ -#ifndef __WINBOND_WB35REG_S_H -#define __WINBOND_WB35REG_S_H - -#include <linux/spinlock.h> -#include <linux/types.h> -#include <linux/atomic.h> - -struct hw_data; - -/* ========================================================================= - * - * HAL setting function - * - * ======================================== - * |Uxx| |Dxx| |Mxx| |BB| |RF| - * ======================================== - * | | - * Wb35Reg_Read Wb35Reg_Write - * - * ---------------------------------------- - * WbUsb_CallUSBDASync supplied By WbUsb module - * ========================================================================== - */ -#define GetBit(dwData, i) (dwData & (0x00000001 << i)) -#define SetBit(dwData, i) (dwData | (0x00000001 << i)) -#define ClearBit(dwData, i) (dwData & ~(0x00000001 << i)) - -#define IGNORE_INCREMENT 0 -#define AUTO_INCREMENT 0 -#define NO_INCREMENT 1 -#define REG_DIRECTION(_x, _y) ((_y)->DIRECT == 0 ? usb_rcvctrlpipe(_x, 0) : usb_sndctrlpipe(_x, 0)) -#define REG_BUF_SIZE(_x) ((_x)->bRequest == 0x04 ? cpu_to_le16((_x)->wLength) : 4) - -#define BB48_DEFAULT_AL2230_11B 0x0033447c -#define BB4C_DEFAULT_AL2230_11B 0x0A00FEFF -#define BB48_DEFAULT_AL2230_11G 0x00332C1B -#define BB4C_DEFAULT_AL2230_11G 0x0A00FEFF - - -#define BB48_DEFAULT_WB242_11B 0x00292315 /* backoff 2dB */ -#define BB4C_DEFAULT_WB242_11B 0x0800FEFF /* backoff 2dB */ -#define BB48_DEFAULT_WB242_11G 0x00453B24 -#define BB4C_DEFAULT_WB242_11G 0x0E00FEFF - -/* - * ==================================== - * Default setting for Mxx - * ==================================== - */ -#define DEFAULT_CWMIN 31 /* (M2C) CWmin. Its value is in the range 0-31. */ -#define DEFAULT_CWMAX 1023 /* (M2C) CWmax. Its value is in the range 0-1023. */ -#define DEFAULT_AID 1 /* (M34) AID. Its value is in the range 1-2007. */ - -#define DEFAULT_RATE_RETRY_LIMIT 2 /* (M38) as named */ - -#define DEFAULT_LONG_RETRY_LIMIT 7 /* (M38) LongRetryLimit. Its value is in the range 0-15. */ -#define DEFAULT_SHORT_RETRY_LIMIT 7 /* (M38) ShortRetryLimit. Its value is in the range 0-15. */ -#define DEFAULT_PIFST 25 /* (M3C) PIFS Time. Its value is in the range 0-65535. */ -#define DEFAULT_EIFST 354 /* (M3C) EIFS Time. Its value is in the range 0-1048575. */ -#define DEFAULT_DIFST 45 /* (M3C) DIFS Time. Its value is in the range 0-65535. */ -#define DEFAULT_SIFST 5 /* (M3C) SIFS Time. Its value is in the range 0-65535. */ -#define DEFAULT_OSIFST 10 /* (M3C) Original SIFS Time. Its value is in the range 0-15. */ -#define DEFAULT_ATIMWD 0 /* (M40) ATIM Window. Its value is in the range 0-65535. */ -#define DEFAULT_SLOT_TIME 20 /* (M40) ($) SlotTime. Its value is in the range 0-255. */ -#define DEFAULT_MAX_TX_MSDU_LIFE_TIME 512 /* (M44) MaxTxMSDULifeTime. Its value is in the range 0-4294967295. */ -#define DEFAULT_BEACON_INTERVAL 500 /* (M48) Beacon Interval. Its value is in the range 0-65535. */ -#define DEFAULT_PROBE_DELAY_TIME 200 /* (M48) Probe Delay Time. Its value is in the range 0-65535. */ -#define DEFAULT_PROTOCOL_VERSION 0 /* (M4C) */ -#define DEFAULT_MAC_POWER_STATE 2 /* (M4C) 2: MAC at power active */ -#define DEFAULT_DTIM_ALERT_TIME 0 - - -struct wb35_reg_queue { - struct urb *urb; - void *pUsbReq; - void *Next; - union { - u32 VALUE; - u32 *pBuffer; - }; - u8 RESERVED[4]; /* space reserved for communication */ - u16 INDEX; /* For storing the register index */ - u8 RESERVED_VALID; /* Indicate whether the RESERVED space is valid at this command. */ - u8 DIRECT; /* 0:In 1:Out */ -}; - -/* - * ==================================== - * Internal variable for module - * ==================================== - */ -#define MAX_SQ3_FILTER_SIZE 5 -struct wb35_reg { - /* - * ============================ - * Register Bank backup - * ============================ - */ - u32 U1B0; /* bit16 record the h/w radio on/off status */ - u32 U1BC_LEDConfigure; - u32 D00_DmaControl; - u32 M00_MacControl; - union { - struct { - u32 M04_MulticastAddress1; - u32 M08_MulticastAddress2; - }; - u8 Multicast[8]; /* contents of card multicast registers */ - }; - - u32 M24_MacControl; - u32 M28_MacControl; - u32 M2C_MacControl; - u32 M38_MacControl; - u32 M3C_MacControl; - u32 M40_MacControl; - u32 M44_MacControl; - u32 M48_MacControl; - u32 M4C_MacStatus; - u32 M60_MacControl; - u32 M68_MacControl; - u32 M70_MacControl; - u32 M74_MacControl; - u32 M78_ERPInformation; - u32 M7C_MacControl; - u32 M80_MacControl; - u32 M84_MacControl; - u32 M88_MacControl; - u32 M98_MacControl; - - /* Baseband register */ - u32 BB0C; /* Used for LNA calculation */ - u32 BB2C; - u32 BB30; /* 11b acquisition control register */ - u32 BB3C; - u32 BB48; - u32 BB4C; - u32 BB50; /* mode control register */ - u32 BB54; - u32 BB58; /* IQ_ALPHA */ - u32 BB5C; /* For test */ - u32 BB60; /* for WTO read value */ - - /* VM */ - spinlock_t EP0VM_spin_lock; /* 4B */ - u32 EP0VM_status; /* $$ */ - struct wb35_reg_queue *reg_first; - struct wb35_reg_queue *reg_last; - atomic_t RegFireCount; - - /* Hardware status */ - u8 EP0vm_state; - u8 mac_power_save; - u8 EEPROMPhyType; /* - * 0 ~ 15 for Maxim (0 ĄV MAX2825, 1 ĄV MAX2827, 2 ĄV MAX2828, 3 ĄV MAX2829), - * 16 ~ 31 for Airoha (16 ĄV AL2230, 11 - AL7230) - * 32 ~ Reserved - * 33 ~ 47 For WB242 ( 33 - WB242, 34 - WB242 with new Txvga 0.5 db step) - * 48 ~ 255 ARE RESERVED. - */ - u8 EEPROMRegion; /* Region setting in EEPROM */ - - u32 SyncIoPause; /* If user use the Sync Io to access Hw, then pause the async access */ - - u8 LNAValue[4]; /* Table for speed up running */ - u32 SQ3_filter[MAX_SQ3_FILTER_SIZE]; - u32 SQ3_index; -}; - -/* ===================================================================== - * Function declaration - * ===================================================================== - */ -void hal_remove_mapping_key(struct hw_data *hw_data, u8 *mac_addr); -void hal_remove_default_key(struct hw_data *hw_data, u32 index); -unsigned char hal_set_mapping_key(struct hw_data *adapter, u8 *mac_addr, - u8 null_key, u8 wep_on, u8 *tx_tsc, - u8 *rx_tsc, u8 key_type, u8 key_len, - u8 *key_data); -unsigned char hal_set_default_key(struct hw_data *adapter, u8 index, - u8 null_key, u8 wep_on, u8 *tx_tsc, - u8 *rx_tsc, u8 key_type, u8 key_len, - u8 *key_data); -void hal_clear_all_default_key(struct hw_data *hw_data); -void hal_clear_all_group_key(struct hw_data *hw_data); -void hal_clear_all_mapping_key(struct hw_data *hw_data); -void hal_clear_all_key(struct hw_data *hw_data); -void hal_set_power_save_mode(struct hw_data *hw_data, unsigned char power_save, - unsigned char wakeup, unsigned char dtim); -void hal_get_power_save_mode(struct hw_data *hw_data, u8 *in_pwr_save); -void hal_set_slot_time(struct hw_data *hw_data, u8 type); - -#define hal_set_atim_window(_A, _ATM) - -void hal_start_bss(struct hw_data *hw_data, u8 mac_op_mode); - -/* 0:BSS STA 1:IBSS STA */ -void hal_join_request(struct hw_data *hw_data, u8 bss_type); - -void hal_stop_sync_bss(struct hw_data *hw_data); -void hal_resume_sync_bss(struct hw_data *hw_data); -void hal_set_aid(struct hw_data *hw_data, u16 aid); -void hal_set_bssid(struct hw_data *hw_data, u8 *bssid); -void hal_get_bssid(struct hw_data *hw_data, u8 *bssid); -void hal_set_listen_interval(struct hw_data *hw_data, u16 listen_interval); -void hal_set_cap_info(struct hw_data *hw_data, u16 capability_info); -void hal_set_ssid(struct hw_data *hw_data, u8 *ssid, u8 ssid_len); -void hal_start_tx0(struct hw_data *hw_data); - -#define hal_get_cwmin(_A) ((_A)->cwmin) - -void hal_set_cwmax(struct hw_data *hw_data, u16 cwin_max); - -#define hal_get_cwmax(_A) ((_A)->cwmax) - -void hal_set_rsn_wpa(struct hw_data *hw_data, u32 *rsn_ie_bitmap, - u32 *rsn_oui_type , unsigned char desired_auth_mode); -void hal_set_connect_info(struct hw_data *hw_data, unsigned char bo_connect); -u8 hal_get_est_sq3(struct hw_data *hw_data, u8 count); -void hal_descriptor_indicate(struct hw_data *hw_data, - struct wb35_descriptor *des); -u8 hal_get_antenna_number(struct hw_data *hw_data); -u32 hal_get_bss_pk_cnt(struct hw_data *hw_data); - -#define hal_get_region_from_EEPROM(_A) ((_A)->reg.EEPROMRegion) -#define hal_get_tx_buffer(_A, _B) Wb35Tx_get_tx_buffer(_A, _B) -#define hal_software_set(_A) (_A->SoftwareSet) -#define hal_driver_init_OK(_A) (_A->IsInitOK) -#define hal_rssi_boundary_high(_A) (_A->RSSI_high) -#define hal_rssi_boundary_low(_A) (_A->RSSI_low) -#define hal_scan_interval(_A) (_A->Scan_Interval) - -#define PHY_DEBUG(msg, args...) - -/* return 100ms count */ -#define hal_get_time_count(_P) (_P->time_count / 10) - -#define hal_ibss_disconnect(_A) (hal_stop_sync_bss(_A)) - -#endif diff --git a/drivers/staging/winbond/wb35rx.c b/drivers/staging/winbond/wb35rx.c deleted file mode 100644 index f006b16..0000000 --- a/drivers/staging/winbond/wb35rx.c +++ /dev/null @@ -1,358 +0,0 @@ -/* - * ============================================================================ - * Copyright (c) 1996-2002 Winbond Electronic Corporation - * - * Module Name: - * Wb35Rx.c - * - * Abstract: - * Processing the Rx message from down layer - * - * ============================================================================ - */ -#include <linux/usb.h> -#include <linux/slab.h> - -#include "core.h" -#include "wb35rx_f.h" - -static void packet_came(struct ieee80211_hw *hw, char *pRxBufferAddress, - int PacketSize) -{ - struct wbsoft_priv *priv = hw->priv; - struct sk_buff *skb; - struct ieee80211_rx_status rx_status = {0}; - - if (!priv->enabled) - return; - - skb = dev_alloc_skb(PacketSize); - if (!skb) { - printk("Not enough memory for packet, FIXME\n"); - return; - } - - memcpy(skb_put(skb, PacketSize), pRxBufferAddress, PacketSize); - - memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); - ieee80211_rx_irqsafe(hw, skb); -} - -static void Wb35Rx_adjust(struct wb35_descriptor *pRxDes) -{ - u32 *pRxBufferAddress; - u32 DecryptionMethod; - u32 i; - u16 BufferSize; - - DecryptionMethod = pRxDes->R01.R01_decryption_method; - pRxBufferAddress = pRxDes->buffer_address[0]; - BufferSize = pRxDes->buffer_size[0]; - - /* Adjust the last part of data. Only data left */ - BufferSize -= 4; /* For CRC-32 */ - if (DecryptionMethod) - BufferSize -= 4; - if (DecryptionMethod == 3) /* For CCMP */ - BufferSize -= 4; - - /* Adjust the IV field which after 802.11 header and ICV field. */ - if (DecryptionMethod == 1) { /* For WEP */ - for (i = 6; i > 0; i--) - pRxBufferAddress[i] = pRxBufferAddress[i - 1]; - pRxDes->buffer_address[0] = pRxBufferAddress + 1; - BufferSize -= 4; /* 4 byte for IV */ - } else if (DecryptionMethod) { /* For TKIP and CCMP */ - for (i = 7; i > 1; i--) - pRxBufferAddress[i] = pRxBufferAddress[i - 2]; - /* Update the descriptor, shift 8 byte */ - pRxDes->buffer_address[0] = pRxBufferAddress + 2; - BufferSize -= 8; /* 8 byte for IV + ICV */ - } - pRxDes->buffer_size[0] = BufferSize; -} - -static u16 Wb35Rx_indicate(struct ieee80211_hw *hw) -{ - struct wbsoft_priv *priv = hw->priv; - struct hw_data *pHwData = &priv->sHwData; - struct wb35_descriptor RxDes; - struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx; - u8 *pRxBufferAddress; - u16 PacketSize; - u16 stmp, BufferSize, stmp2 = 0; - u32 RxBufferId; - - /* Only one thread be allowed to run into the following */ - do { - RxBufferId = pWb35Rx->RxProcessIndex; - if (pWb35Rx->RxOwner[RxBufferId]) /* Owner by VM */ - break; - - pWb35Rx->RxProcessIndex++; - pWb35Rx->RxProcessIndex %= MAX_USB_RX_BUFFER_NUMBER; - - pRxBufferAddress = pWb35Rx->pDRx; - BufferSize = pWb35Rx->RxBufferSize[RxBufferId]; - - /* Parse the bulkin buffer */ - while (BufferSize >= 4) { - /* Is ending? */ - if ((cpu_to_le32(*(u32 *)pRxBufferAddress) & 0x0fffffff) == - RX_END_TAG) - break; - - /* Get the R00 R01 first */ - RxDes.R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress); - PacketSize = (u16)RxDes.R00.R00_receive_byte_count; - RxDes.R01.value = le32_to_cpu(*((u32 *)(pRxBufferAddress + 4))); - /* For new DMA 4k */ - if ((PacketSize & 0x03) > 0) - PacketSize -= 4; - - /* Basic check for Rx length. Is length valid? */ - if (PacketSize > MAX_PACKET_SIZE) { - pr_debug("Serious ERROR : Rx data size too long, size =%d\n", - PacketSize); - pWb35Rx->EP3vm_state = VM_STOP; - pWb35Rx->Ep3ErrorCount2++; - break; - } - - /* - * Wb35Rx_indicate() is called synchronously so it isn't - * necessary to set "RxDes.Desctriptor_ID = RxBufferID;" - */ - /* subtract 8 byte for 35's USB header length */ - BufferSize -= 8; - pRxBufferAddress += 8; - - RxDes.buffer_address[0] = pRxBufferAddress; - RxDes.buffer_size[0] = PacketSize; - RxDes.buffer_number = 1; - RxDes.buffer_start_index = 0; - RxDes.buffer_total_size = RxDes.buffer_size[0]; - Wb35Rx_adjust(&RxDes); - - packet_came(hw, pRxBufferAddress, PacketSize); - - /* Move RxBuffer point to the next */ - stmp = PacketSize + 3; - stmp &= ~0x03; /* 4n alignment */ - pRxBufferAddress += stmp; - BufferSize -= stmp; - stmp2 += stmp; - } - - /* Reclaim resource */ - pWb35Rx->RxOwner[RxBufferId] = 1; - } while (true); - return stmp2; -} - -static void Wb35Rx(struct ieee80211_hw *hw); - -static void Wb35Rx_Complete(struct urb *urb) -{ - struct ieee80211_hw *hw = urb->context; - struct wbsoft_priv *priv = hw->priv; - struct hw_data *pHwData = &priv->sHwData; - struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx; - u8 *pRxBufferAddress; - u32 SizeCheck; - u16 BulkLength; - u32 RxBufferId; - struct R00_descriptor R00; - - /* Variable setting */ - pWb35Rx->EP3vm_state = VM_COMPLETED; - pWb35Rx->EP3VM_status = urb->status; /* Store the last result of Irp */ - - RxBufferId = pWb35Rx->CurrentRxBufferId; - - pRxBufferAddress = pWb35Rx->pDRx; - BulkLength = (u16)urb->actual_length; - - /* The IRP is completed */ - pWb35Rx->EP3vm_state = VM_COMPLETED; - - if (pHwData->SurpriseRemove) /* Must be here, or RxBufferId is invalid */ - goto error; - - if (pWb35Rx->rx_halt) - goto error; - - /* Start to process the data only in successful condition */ - pWb35Rx->RxOwner[RxBufferId] = 0; /* Set the owner to driver */ - R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress); - - /* The URB is completed, check the result */ - if (pWb35Rx->EP3VM_status != 0) { - pr_debug("EP3 IoCompleteRoutine return error\n"); - pWb35Rx->EP3vm_state = VM_STOP; - goto error; - } - - /* For recovering. check if operating in single USB mode */ - if (!HAL_USB_MODE_BURST(pHwData)) { - SizeCheck = R00.R00_receive_byte_count; - if ((SizeCheck & 0x03) > 0) - SizeCheck -= 4; - SizeCheck = (SizeCheck + 3) & ~0x03; - SizeCheck += 12; /* 8 + 4 badbeef */ - if ((BulkLength > 1600) || - (SizeCheck > 1600) || - (BulkLength != SizeCheck) || - (BulkLength == 0)) { /* Add for fail Urb */ - pWb35Rx->EP3vm_state = VM_STOP; - pWb35Rx->Ep3ErrorCount2++; - } - } - - /* Indicating the receiving data */ - pWb35Rx->ByteReceived += BulkLength; - pWb35Rx->RxBufferSize[RxBufferId] = BulkLength; - - if (!pWb35Rx->RxOwner[RxBufferId]) - Wb35Rx_indicate(hw); - - kfree(pWb35Rx->pDRx); - /* Do the next receive */ - Wb35Rx(hw); - return; - -error: - pWb35Rx->RxOwner[RxBufferId] = 1; /* Set the owner to hardware */ - atomic_dec(&pWb35Rx->RxFireCounter); - pWb35Rx->EP3vm_state = VM_STOP; -} - -/* This function cannot reentrain */ -static void Wb35Rx(struct ieee80211_hw *hw) -{ - struct wbsoft_priv *priv = hw->priv; - struct hw_data *pHwData = &priv->sHwData; - struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx; - u8 *pRxBufferAddress; - struct urb *urb = pWb35Rx->RxUrb; - int retv; - u32 RxBufferId; - - /* Issuing URB */ - if (pHwData->SurpriseRemove) - goto error; - - if (pWb35Rx->rx_halt) - goto error; - - /* Get RxBuffer's ID */ - RxBufferId = pWb35Rx->RxBufferId; - if (!pWb35Rx->RxOwner[RxBufferId]) { - /* It's impossible to run here. */ - pr_debug("Rx driver fifo unavailable\n"); - goto error; - } - - /* Update buffer point, then start to bulkin the data from USB */ - pWb35Rx->RxBufferId++; - pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER; - - pWb35Rx->CurrentRxBufferId = RxBufferId; - - pWb35Rx->pDRx = kzalloc(MAX_USB_RX_BUFFER, GFP_ATOMIC); - if (!pWb35Rx->pDRx) { - dev_info(&hw->wiphy->dev, "w35und: Rx memory alloc failed\n"); - goto error; - } - pRxBufferAddress = pWb35Rx->pDRx; - - usb_fill_bulk_urb(urb, pHwData->udev, - usb_rcvbulkpipe(pHwData->udev, 3), - pRxBufferAddress, MAX_USB_RX_BUFFER, - Wb35Rx_Complete, hw); - - pWb35Rx->EP3vm_state = VM_RUNNING; - - retv = usb_submit_urb(urb, GFP_ATOMIC); - - if (retv != 0) { - dev_info(&hw->wiphy->dev, "Rx URB sending error\n"); - goto error; - } - return; - -error: - /* VM stop */ - pWb35Rx->EP3vm_state = VM_STOP; - atomic_dec(&pWb35Rx->RxFireCounter); -} - -void Wb35Rx_start(struct ieee80211_hw *hw) -{ - struct wbsoft_priv *priv = hw->priv; - struct hw_data *pHwData = &priv->sHwData; - struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx; - - /* Allow only one thread to run into the Wb35Rx() function */ - if (atomic_inc_return(&pWb35Rx->RxFireCounter) == 1) { - pWb35Rx->EP3vm_state = VM_RUNNING; - Wb35Rx(hw); - } else - atomic_dec(&pWb35Rx->RxFireCounter); -} - -static void Wb35Rx_reset_descriptor(struct hw_data *pHwData) -{ - struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx; - u32 i; - - pWb35Rx->ByteReceived = 0; - pWb35Rx->RxProcessIndex = 0; - pWb35Rx->RxBufferId = 0; - pWb35Rx->EP3vm_state = VM_STOP; - pWb35Rx->rx_halt = 0; - - /* Initial the Queue. The last buffer is reserved for used - * if the Rx resource is unavailable. - */ - for (i = 0; i < MAX_USB_RX_BUFFER_NUMBER; i++) - pWb35Rx->RxOwner[i] = 1; -} - -unsigned char Wb35Rx_initial(struct hw_data *pHwData) -{ - struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx; - - /* Initial the Buffer Queue */ - Wb35Rx_reset_descriptor(pHwData); - - pWb35Rx->RxUrb = usb_alloc_urb(0, GFP_ATOMIC); - return !!pWb35Rx->RxUrb; -} - -void Wb35Rx_stop(struct hw_data *pHwData) -{ - struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx; - - /* Canceling the Irp if already sends it out. */ - if (pWb35Rx->EP3vm_state == VM_RUNNING) { - /* Only use unlink, let Wb35Rx_destroy to free them */ - usb_unlink_urb(pWb35Rx->RxUrb); - pr_debug("EP3 Rx stop\n"); - } -} - -/* Needs process context */ -void Wb35Rx_destroy(struct hw_data *pHwData) -{ - struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx; - - do { - msleep(10); /* Delay for waiting function enter */ - } while (pWb35Rx->EP3vm_state != VM_STOP); - msleep(10); /* Delay for waiting function exit */ - - usb_free_urb(pWb35Rx->RxUrb); - pr_debug("Wb35Rx_destroy OK\n"); -} - diff --git a/drivers/staging/winbond/wb35rx_f.h b/drivers/staging/winbond/wb35rx_f.h deleted file mode 100644 index 559bdca..0000000 --- a/drivers/staging/winbond/wb35rx_f.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __WINBOND_WB35RX_F_H -#define __WINBOND_WB35RX_F_H - -#include <net/mac80211.h> -#include "wbhal.h" - -/* - * Interface function declaration - */ -unsigned char Wb35Rx_initial(struct hw_data *pHwData); -void Wb35Rx_destroy(struct hw_data *pHwData); -void Wb35Rx_stop(struct hw_data *pHwData); -void Wb35Rx_start(struct ieee80211_hw *hw); - -#endif diff --git a/drivers/staging/winbond/wb35rx_s.h b/drivers/staging/winbond/wb35rx_s.h deleted file mode 100644 index 545bc95..0000000 --- a/drivers/staging/winbond/wb35rx_s.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef __WINBOND_35RX_S_H -#define __WINBOND_35RX_S_H - -/* Definition for this module used */ -#define MAX_USB_RX_BUFFER 4096 /* This parameter must be 4096 931130.4.f */ -#define MAX_USB_RX_BUFFER_NUMBER ETHERNET_RX_DESCRIPTORS /* Maximum 254, 255 is RESERVED ID */ -#define RX_INTERFACE 0 /* Interface 1 */ -#define RX_PIPE 2 /* Pipe 3 */ -#define MAX_PACKET_SIZE 1600 /* 1568 = 8 + 1532 + 4 + 24(IV EIV MIC ICV CRC) for check DMA data 931130.4.g */ -#define RX_END_TAG 0x0badbeef - - -/* - * Internal variable for module - */ -struct wb35_rx { - u32 ByteReceived; /* For calculating throughput of BulkIn */ - atomic_t RxFireCounter;/* Does Wb35Rx module fire? */ - - u8 RxBuffer[MAX_USB_RX_BUFFER_NUMBER][((MAX_USB_RX_BUFFER+3) & ~0x03)]; - u16 RxBufferSize[((MAX_USB_RX_BUFFER_NUMBER+1) & ~0x01)]; - u8 RxOwner[((MAX_USB_RX_BUFFER_NUMBER+3) & ~0x03)]; /* Ownership of buffer 0:SW 1:HW */ - - u32 RxProcessIndex; /* The next index to process */ - u32 RxBufferId; - u32 EP3vm_state; - - u32 rx_halt; /* For VM stopping */ - - u16 MoreDataSize; - u16 PacketSize; - - u32 CurrentRxBufferId; /* For complete routine usage */ - u32 Rx3UrbCancel; - - u32 LastR1; /* For RSSI reporting */ - struct urb *RxUrb; - u32 Ep3ErrorCount2; /* 20060625.1 Usbd for Rx DMA error count */ - - int EP3VM_status; - u8 *pDRx; -}; - -#endif /* __WINBOND_35RX_S_H */ diff --git a/drivers/staging/winbond/wb35tx.c b/drivers/staging/winbond/wb35tx.c deleted file mode 100644 index 870cff3..0000000 --- a/drivers/staging/winbond/wb35tx.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * Copyright (c) 1996-2002 Winbond Electronic Corporation - * - * Module Name: - * Wb35Tx.c - * - * Abstract: - * Processing the Tx message and put into down layer - * - */ -#include <linux/usb.h> -#include <linux/gfp.h> - -#include "wb35tx_f.h" -#include "mds_f.h" - -unsigned char -Wb35Tx_get_tx_buffer(struct hw_data *pHwData, u8 **pBuffer) -{ - struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx; - - *pBuffer = pWb35Tx->TxBuffer[0]; - return true; -} - -static void Wb35Tx(struct wbsoft_priv *adapter); - -static void Wb35Tx_complete(struct urb *pUrb) -{ - struct wbsoft_priv *adapter = pUrb->context; - struct hw_data *pHwData = &adapter->sHwData; - struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx; - struct wb35_mds *pMds = &adapter->Mds; - - printk("wb35: tx complete\n"); - /* Variable setting */ - pWb35Tx->EP4vm_state = VM_COMPLETED; - pWb35Tx->EP4VM_status = pUrb->status; /* Store the last result of Irp */ - /* Set the owner. Free the owner bit always. */ - pMds->TxOwner[pWb35Tx->TxSendIndex] = 0; - pWb35Tx->TxSendIndex++; - pWb35Tx->TxSendIndex %= MAX_USB_TX_BUFFER_NUMBER; - - if (pHwData->SurpriseRemove) /* Let WbWlanHalt handle surprise remove */ - goto error; - - if (pWb35Tx->tx_halt) - goto error; - - /* The URB is completed, check the result */ - if (pWb35Tx->EP4VM_status != 0) { - dev_err(&pUrb->dev->dev, "URB submission failed\n"); - pWb35Tx->EP4vm_state = VM_STOP; - goto error; - } - - Mds_Tx(adapter); - Wb35Tx(adapter); - return; - -error: - atomic_dec(&pWb35Tx->TxFireCounter); - pWb35Tx->EP4vm_state = VM_STOP; -} - -static void Wb35Tx(struct wbsoft_priv *adapter) -{ - struct hw_data *pHwData = &adapter->sHwData; - struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx; - u8 *pTxBufferAddress; - struct wb35_mds *pMds = &adapter->Mds; - struct urb *pUrb = (struct urb *)pWb35Tx->Tx4Urb; - int retv; - u32 SendIndex; - - if (pHwData->SurpriseRemove) - goto cleanup; - - if (pWb35Tx->tx_halt) - goto cleanup; - - /* Ownership checking */ - SendIndex = pWb35Tx->TxSendIndex; - /* No more data need to be sent, return immediately */ - if (!pMds->TxOwner[SendIndex]) - goto cleanup; - - pTxBufferAddress = pWb35Tx->TxBuffer[SendIndex]; - - /* Issuing URB */ - usb_fill_bulk_urb(pUrb, pHwData->udev, - usb_sndbulkpipe(pHwData->udev, 4), - pTxBufferAddress, pMds->TxBufferSize[SendIndex], - Wb35Tx_complete, adapter); - - pWb35Tx->EP4vm_state = VM_RUNNING; - retv = usb_submit_urb(pUrb, GFP_ATOMIC); - if (retv < 0) { - dev_err(&pUrb->dev->dev, "EP4 Tx Irp sending error\n"); - goto cleanup; - } - - /* Check if driver needs issue Irp for EP2 */ - pWb35Tx->TxFillCount += pMds->TxCountInBuffer[SendIndex]; - if (pWb35Tx->TxFillCount > 12) - Wb35Tx_EP2VM_start(adapter); - - pWb35Tx->ByteTransfer += pMds->TxBufferSize[SendIndex]; - return; - - cleanup: - pWb35Tx->EP4vm_state = VM_STOP; - atomic_dec(&pWb35Tx->TxFireCounter); -} - -void Wb35Tx_start(struct wbsoft_priv *adapter) -{ - struct hw_data *pHwData = &adapter->sHwData; - struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx; - - /* Allow only one thread to run into function */ - if (atomic_inc_return(&pWb35Tx->TxFireCounter) == 1) { - pWb35Tx->EP4vm_state = VM_RUNNING; - Wb35Tx(adapter); - } else - atomic_dec(&pWb35Tx->TxFireCounter); -} - -unsigned char Wb35Tx_initial(struct hw_data *pHwData) -{ - struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx; - - pWb35Tx->Tx4Urb = usb_alloc_urb(0, GFP_ATOMIC); - if (!pWb35Tx->Tx4Urb) - return false; - - pWb35Tx->Tx2Urb = usb_alloc_urb(0, GFP_ATOMIC); - if (!pWb35Tx->Tx2Urb) { - usb_free_urb(pWb35Tx->Tx4Urb); - return false; - } - - return true; -} - -void Wb35Tx_stop(struct hw_data *pHwData) -{ - struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx; - - /* Try to cancel the Trp of EP2 */ - if (pWb35Tx->EP2vm_state == VM_RUNNING) - /* Only use unlink, let Wb35Tx_destroy free them */ - usb_unlink_urb(pWb35Tx->Tx2Urb); - pr_debug("EP2 Tx stop\n"); - - /* Try to cancel the Irp of EP4 */ - if (pWb35Tx->EP4vm_state == VM_RUNNING) - /* Only use unlink, let Wb35Tx_destroy free them */ - usb_unlink_urb(pWb35Tx->Tx4Urb); - pr_debug("EP4 Tx stop\n"); -} - -void Wb35Tx_destroy(struct hw_data *pHwData) -{ - struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx; - - /* Wait for VM stop */ - do { - msleep(10); /* Delay for waiting function enter 940623.1.a */ - } while ((pWb35Tx->EP2vm_state != VM_STOP) && (pWb35Tx->EP4vm_state != VM_STOP)); - msleep(10); /* Delay for waiting function enter 940623.1.b */ - - usb_free_urb(pWb35Tx->Tx4Urb); - usb_free_urb(pWb35Tx->Tx2Urb); - - pr_debug("Wb35Tx_destroy OK\n"); -} - -void Wb35Tx_CurrentTime(struct wbsoft_priv *adapter, u32 TimeCount) -{ - struct hw_data *pHwData = &adapter->sHwData; - struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx; - bool Trigger = false; - - if (pWb35Tx->TxTimer > TimeCount) - Trigger = true; - else if (TimeCount > (pWb35Tx->TxTimer+500)) - Trigger = true; - - if (Trigger) { - pWb35Tx->TxTimer = TimeCount; - Wb35Tx_EP2VM_start(adapter); - } -} - -static void Wb35Tx_EP2VM(struct wbsoft_priv *adapter); - -static void Wb35Tx_EP2VM_complete(struct urb *pUrb) -{ - struct wbsoft_priv *adapter = pUrb->context; - struct hw_data *pHwData = &adapter->sHwData; - struct T02_descriptor T02, TSTATUS; - struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx; - u32 *pltmp = (u32 *)pWb35Tx->EP2_buf; - u32 i; - u16 InterruptInLength; - - /* Variable setting */ - pWb35Tx->EP2vm_state = VM_COMPLETED; - pWb35Tx->EP2VM_status = pUrb->status; - - /* For Linux 2.4. Interrupt will always trigger */ - if (pHwData->SurpriseRemove) /* Let WbWlanHalt handle surprise remove */ - goto error; - - if (pWb35Tx->tx_halt) - goto error; - - /* The Urb is completed, check the result */ - if (pWb35Tx->EP2VM_status != 0) { - dev_err(&pUrb->dev->dev, "EP2 IoCompleteRoutine return error\n"); - pWb35Tx->EP2vm_state = VM_STOP; - goto error; - } - - /* Update the Tx result */ - InterruptInLength = pUrb->actual_length; - /* Modify for minimum memory access and DWORD alignment. */ - T02.value = cpu_to_le32(pltmp[0]) >> 8; /* [31:8] -> [24:0] */ - InterruptInLength -= 1; /* 20051221.1.c Modify the follow for more stable */ - InterruptInLength >>= 2; /* InterruptInLength/4 */ - for (i = 1; i <= InterruptInLength; i++) { - T02.value |= ((cpu_to_le32(pltmp[i]) & 0xff) << 24); - - TSTATUS.value = T02.value; /* 20061009 anson's endian */ - Mds_SendComplete(adapter, &TSTATUS); - T02.value = cpu_to_le32(pltmp[i]) >> 8; - } - - return; -error: - atomic_dec(&pWb35Tx->TxResultCount); - pWb35Tx->EP2vm_state = VM_STOP; -} - -static void Wb35Tx_EP2VM(struct wbsoft_priv *adapter) -{ - struct hw_data *pHwData = &adapter->sHwData; - struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx; - struct urb *pUrb = (struct urb *)pWb35Tx->Tx2Urb; - u32 *pltmp = (u32 *)pWb35Tx->EP2_buf; - int retv; - - if (pHwData->SurpriseRemove) - goto error; - - if (pWb35Tx->tx_halt) - goto error; - - /* Issuing URB */ - usb_fill_int_urb(pUrb, pHwData->udev, usb_rcvintpipe(pHwData->udev, 2), - pltmp, MAX_INTERRUPT_LENGTH, Wb35Tx_EP2VM_complete, - adapter, 32); - - pWb35Tx->EP2vm_state = VM_RUNNING; - retv = usb_submit_urb(pUrb, GFP_ATOMIC); - - if (retv < 0) { - pr_debug("EP2 Tx Irp sending error\n"); - goto error; - } - - return; -error: - pWb35Tx->EP2vm_state = VM_STOP; - atomic_dec(&pWb35Tx->TxResultCount); -} - -void Wb35Tx_EP2VM_start(struct wbsoft_priv *adapter) -{ - struct hw_data *pHwData = &adapter->sHwData; - struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx; - - /* Allow only one thread to run into function */ - if (atomic_inc_return(&pWb35Tx->TxResultCount) == 1) { - pWb35Tx->EP2vm_state = VM_RUNNING; - Wb35Tx_EP2VM(adapter); - } else - atomic_dec(&pWb35Tx->TxResultCount); -} diff --git a/drivers/staging/winbond/wb35tx_f.h b/drivers/staging/winbond/wb35tx_f.h deleted file mode 100644 index 018fd35..0000000 --- a/drivers/staging/winbond/wb35tx_f.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef __WINBOND_WB35TX_F_H -#define __WINBOND_WB35TX_F_H - -#include "core.h" - -/* - * ==================================== - * Interface function declare - * ==================================== - */ -unsigned char Wb35Tx_initial(struct hw_data *hw_data); -void Wb35Tx_destroy(struct hw_data *hw_data); -unsigned char Wb35Tx_get_tx_buffer(struct hw_data *hw_data, u8 **buffer); - -void Wb35Tx_EP2VM_start(struct wbsoft_priv *adapter); - -void Wb35Tx_start(struct wbsoft_priv *adapter); -void Wb35Tx_stop(struct hw_data *hw_data); - -void Wb35Tx_CurrentTime(struct wbsoft_priv *adapter, u32 time_count); - -#endif diff --git a/drivers/staging/winbond/wb35tx_s.h b/drivers/staging/winbond/wb35tx_s.h deleted file mode 100644 index dc12008..0000000 --- a/drivers/staging/winbond/wb35tx_s.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef __WINBOND_WB35_TX_S_H -#define __WINBOND_WB35_TX_S_H - -#include "mds_s.h" - -/* IS89C35 Tx related definition */ -#define TX_INTERFACE 0 /* Interface 1 */ -#define TX_PIPE 3 /* Endpoint 4 */ -#define TX_INTERRUPT 1 /* Endpoint 2 */ -#define MAX_INTERRUPT_LENGTH 64 /* It must be 64 for EP2 hardware */ - -/* Internal variable for module */ -struct wb35_tx { - /* For Tx buffer */ - u8 TxBuffer[MAX_USB_TX_BUFFER_NUMBER][MAX_USB_TX_BUFFER]; - - /* For Interrupt pipe */ - u8 EP2_buf[MAX_INTERRUPT_LENGTH]; - - atomic_t TxResultCount; /* For thread control of EP2 931130.4.m */ - atomic_t TxFireCounter; /* For thread control of EP4 931130.4.n */ - u32 ByteTransfer; - - u32 TxSendIndex; /* The next index of Mds array to be sent */ - u32 EP2vm_state; /* for EP2vm state */ - u32 EP4vm_state; /* for EP4vm state */ - u32 tx_halt; /* Stopping VM */ - - struct urb *Tx4Urb; - struct urb *Tx2Urb; - - int EP2VM_status; - int EP4VM_status; - - u32 TxFillCount; /* 20060928 */ - u32 TxTimer; /* 20060928 Add if sending packet is greater than 13 */ -}; - -#endif diff --git a/drivers/staging/winbond/wbhal.h b/drivers/staging/winbond/wbhal.h deleted file mode 100644 index 289ee54..0000000 --- a/drivers/staging/winbond/wbhal.h +++ /dev/null @@ -1,513 +0,0 @@ -#ifndef __WINBOND_WBHAL_S_H -#define __WINBOND_WBHAL_S_H - -#include <linux/types.h> -#include <linux/if_ether.h> /* for ETH_ALEN */ - -#define HAL_LED_SET_MASK 0x001c -#define HAL_LED_SET_SHIFT 2 - -/* supported RF type */ -#define RF_MAXIM_2825 0 -#define RF_MAXIM_2827 1 -#define RF_MAXIM_2828 2 -#define RF_MAXIM_2829 3 -#define RF_MAXIM_V1 15 -#define RF_AIROHA_2230 16 -#define RF_AIROHA_7230 17 -#define RF_AIROHA_2230S 18 -#define RF_WB_242 33 -#define RF_WB_242_1 34 -#define RF_DECIDE_BY_INF 255 - -/* - * ---------------------------------------------------------------- - * The follow define connect to upper layer - * User must modify for connection between HAL and upper layer - * ---------------------------------------------------------------- - */ - -/* - * ============================== - * Common define - * ============================== - */ -/* Bit 5 */ -#define HAL_USB_MODE_BURST(_H) (_H->SoftwareSet & 0x20) - -/* Scan interval */ -#define SCAN_MAX_CHNL_TIME (50) - -/* For TxL2 Frame typr recognise */ -#define FRAME_TYPE_802_3_DATA 0 -#define FRAME_TYPE_802_11_MANAGEMENT 1 -#define FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE 2 -#define FRAME_TYPE_802_11_CONTROL 3 -#define FRAME_TYPE_802_11_DATA 4 -#define FRAME_TYPE_PROMISCUOUS 5 - -/* The follow definition is used for convert the frame------------ */ -#define DOT_11_SEQUENCE_OFFSET 22 /* Sequence control offset */ -#define DOT_3_TYPE_OFFSET 12 -#define DOT_11_MAC_HEADER_SIZE 24 -#define DOT_11_SNAP_SIZE 6 -#define DOT_11_TYPE_OFFSET 30 /* The start offset of 802.11 Frame. Type encapsulation. */ -#define DEFAULT_SIFSTIME 10 -#define DEFAULT_FRAGMENT_THRESHOLD 2346 /* No fragment */ -#define DEFAULT_MSDU_LIFE_TIME 0xffff - -#define LONG_PREAMBLE_PLUS_PLCPHEADER_TIME (144 + 48) -#define SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME (72 + 24) -#define PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION (16 + 4 + 6) -#define Tsym 4 - -/* Frame Type of Bits (2, 3)----------------------------------- */ -#define MAC_TYPE_MANAGEMENT 0x00 -#define MAC_TYPE_CONTROL 0x04 -#define MAC_TYPE_DATA 0x08 -#define MASK_FRAGMENT_NUMBER 0x000F -#define SEQUENCE_NUMBER_SHIFT 4 - -#define HAL_WOL_TYPE_WAKEUP_FRAME 0x01 -#define HAL_WOL_TYPE_MAGIC_PACKET 0x02 - -#define HAL_KEYTYPE_WEP40 0 -#define HAL_KEYTYPE_WEP104 1 -#define HAL_KEYTYPE_TKIP 2 /* 128 bit key */ -#define HAL_KEYTYPE_AES_CCMP 3 /* 128 bit key */ - -/* For VM state */ -enum { - VM_STOP = 0, - VM_RUNNING, - VM_COMPLETED -}; - -/* - * ================================ - * Normal Key table format - * ================================ - */ - -/* The order of KEY index is MAPPING_KEY_START_INDEX > GROUP_KEY_START_INDEX */ -#define MAX_KEY_TABLE 24 /* 24 entry for storing key data */ -#define GROUP_KEY_START_INDEX 4 -#define MAPPING_KEY_START_INDEX 8 - -/* - * ========================================= - * Descriptor - * ========================================= - */ -#define MAX_DESCRIPTOR_BUFFER_INDEX 8 /* Have to multiple of 2 */ -#define FLAG_ERROR_TX_MASK 0x000000bf -#define FLAG_ERROR_RX_MASK 0x0000083f - -#define FLAG_BAND_RX_MASK 0x10000000 /* Bit 28 */ - -struct R00_descriptor { - union { - u32 value; -#ifdef _BIG_ENDIAN_ - struct { - u32 R00_packet_or_buffer_status:1; - u32 R00_packet_in_fifo:1; - u32 R00_RESERVED:2; - u32 R00_receive_byte_count:12; - u32 R00_receive_time_index:16; - }; -#else - struct { - u32 R00_receive_time_index:16; - u32 R00_receive_byte_count:12; - u32 R00_RESERVED:2; - u32 R00_packet_in_fifo:1; - u32 R00_packet_or_buffer_status:1; - }; -#endif - }; -}; - -struct T00_descriptor { - union { - u32 value; -#ifdef _BIG_ENDIAN_ - struct { - u32 T00_first_mpdu:1; /* for hardware use */ - u32 T00_last_mpdu:1; /* for hardware use */ - u32 T00_IsLastMpdu:1;/* 0:not 1:Yes for software used */ - u32 T00_IgnoreResult:1;/* The same mechanism with T00 setting. */ - u32 T00_RESERVED_ID:2;/* 3 bit ID reserved */ - u32 T00_tx_packet_id:4; - u32 T00_RESERVED:4; - u32 T00_header_length:6; - u32 T00_frame_length:12; - }; -#else - struct { - u32 T00_frame_length:12; - u32 T00_header_length:6; - u32 T00_RESERVED:4; - u32 T00_tx_packet_id:4; - u32 T00_RESERVED_ID:2; /* 3 bit ID reserved */ - u32 T00_IgnoreResult:1; /* The same mechanism with T00 setting. */ - u32 T00_IsLastMpdu:1; /* 0:not 1:Yes for software used */ - u32 T00_last_mpdu:1; /* for hardware use */ - u32 T00_first_mpdu:1; /* for hardware use */ - }; -#endif - }; -}; - -struct R01_descriptor { - union { - u32 value; -#ifdef _BIG_ENDIAN_ - struct { - u32 R01_RESERVED:3; - u32 R01_mod_type:1; - u32 R01_pre_type:1; - u32 R01_data_rate:3; - u32 R01_AGC_state:8; - u32 R01_LNA_state:2; - u32 R01_decryption_method:2; - u32 R01_mic_error:1; - u32 R01_replay:1; - u32 R01_broadcast_frame:1; - u32 R01_multicast_frame:1; - u32 R01_directed_frame:1; - u32 R01_receive_frame_antenna_selection:1; - u32 R01_frame_receive_during_atim_window:1; - u32 R01_protocol_version_error:1; - u32 R01_authentication_frame_icv_error:1; - u32 R01_null_key_to_authentication_frame:1; - u32 R01_icv_error:1; - u32 R01_crc_error:1; - }; -#else - struct { - u32 R01_crc_error:1; - u32 R01_icv_error:1; - u32 R01_null_key_to_authentication_frame:1; - u32 R01_authentication_frame_icv_error:1; - u32 R01_protocol_version_error:1; - u32 R01_frame_receive_during_atim_window:1; - u32 R01_receive_frame_antenna_selection:1; - u32 R01_directed_frame:1; - u32 R01_multicast_frame:1; - u32 R01_broadcast_frame:1; - u32 R01_replay:1; - u32 R01_mic_error:1; - u32 R01_decryption_method:2; - u32 R01_LNA_state:2; - u32 R01_AGC_state:8; - u32 R01_data_rate:3; - u32 R01_pre_type:1; - u32 R01_mod_type:1; - u32 R01_RESERVED:3; - }; -#endif - }; -}; - -struct T01_descriptor { - union { - u32 value; -#ifdef _BIG_ENDIAN_ - struct { - u32 T01_rts_cts_duration:16; - u32 T01_fall_back_rate:3; - u32 T01_add_rts:1; - u32 T01_add_cts:1; - u32 T01_modulation_type:1; - u32 T01_plcp_header_length:1; - u32 T01_transmit_rate:3; - u32 T01_wep_id:2; - u32 T01_add_challenge_text:1; - u32 T01_inhibit_crc:1; - u32 T01_loop_back_wep_mode:1; - u32 T01_retry_abort_enable:1; - }; -#else - struct { - u32 T01_retry_abort_enable:1; - u32 T01_loop_back_wep_mode:1; - u32 T01_inhibit_crc:1; - u32 T01_add_challenge_text:1; - u32 T01_wep_id:2; - u32 T01_transmit_rate:3; - u32 T01_plcp_header_length:1; - u32 T01_modulation_type:1; - u32 T01_add_cts:1; - u32 T01_add_rts:1; - u32 T01_fall_back_rate:3; - u32 T01_rts_cts_duration:16; - }; -#endif - }; -}; - -struct T02_descriptor { - union { - u32 value; -#ifdef _BIG_ENDIAN_ - struct { - u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */ - u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */ - u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */ - u32 T02_Tx_PktID:4; - u32 T02_MPDU_Cnt:4; - u32 T02_RTS_Cnt:4; - u32 T02_RESERVED:7; - u32 T02_transmit_complete:1; - u32 T02_transmit_abort_due_to_TBTT:1; - u32 T02_effective_transmission_rate:1; - u32 T02_transmit_without_encryption_due_to_wep_on_false:1; - u32 T02_discard_due_to_null_wep_key:1; - u32 T02_RESERVED_1:1; - u32 T02_out_of_MaxTxMSDULiftTime:1; - u32 T02_transmit_abort:1; - u32 T02_transmit_fail:1; - }; -#else - struct { - u32 T02_transmit_fail:1; - u32 T02_transmit_abort:1; - u32 T02_out_of_MaxTxMSDULiftTime:1; - u32 T02_RESERVED_1:1; - u32 T02_discard_due_to_null_wep_key:1; - u32 T02_transmit_without_encryption_due_to_wep_on_false:1; - u32 T02_effective_transmission_rate:1; - u32 T02_transmit_abort_due_to_TBTT:1; - u32 T02_transmit_complete:1; - u32 T02_RESERVED:7; - u32 T02_RTS_Cnt:4; - u32 T02_MPDU_Cnt:4; - u32 T02_Tx_PktID:4; - u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */ - u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */ - u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */ - }; -#endif - }; -}; - -struct wb35_descriptor { /* Skip length = 8 DWORD */ - /* ID for descriptor ---, The field doesn't be cleard in the operation of Descriptor definition */ - u8 Descriptor_ID; - /* ----------------------The above region doesn't be cleared by DESCRIPTOR_RESET------ */ - u8 RESERVED[3]; - - u16 FragmentThreshold; - u8 InternalUsed; /* Only can be used by operation of descriptor definition */ - u8 Type; /* 0: 802.3 1:802.11 data frame 2:802.11 management frame */ - - u8 PreambleMode;/* 0: short 1:long */ - u8 TxRate; - u8 FragmentCount; - u8 EapFix; /* For speed up key install */ - - /* For R00 and T00 ------------------------------ */ - union { - struct R00_descriptor R00; - struct T00_descriptor T00; - }; - - /* For R01 and T01 ------------------------------ */ - union { - struct R01_descriptor R01; - struct T01_descriptor T01; - }; - - /* For R02 and T02 ------------------------------ */ - union { - u32 R02; - struct T02_descriptor T02; - }; - - /* For R03 and T03 ------------------------------ */ - /* For software used */ - union { - u32 R03; - u32 T03; - struct { - u8 buffer_number; - u8 buffer_start_index; - u16 buffer_total_size; - }; - }; - - /* For storing the buffer */ - u16 buffer_size[MAX_DESCRIPTOR_BUFFER_INDEX]; - void *buffer_address[MAX_DESCRIPTOR_BUFFER_INDEX]; -}; - -#define MAX_TXVGA_EEPROM 9 /* How many word(u16) of EEPROM will be used for TxVGA */ -#define MAX_RF_PARAMETER 32 - -struct txvga_for_50 { - u8 ChanNo; - u8 TxVgaValue; -}; - -/* - * ============================================== - * Device related include - * ============================================== - */ - -#include "wb35reg_s.h" -#include "wb35tx_s.h" -#include "wb35rx_s.h" - -/* For Hal using ============================================ */ -struct hw_data { - /* For compatible with 33 */ - u32 revision; - u32 BB3c_cal; /* The value for Tx calibration comes from EEPROM */ - u32 BB54_cal; /* The value for Rx calibration comes from EEPROM */ - - /* For surprise remove */ - u32 SurpriseRemove; /* 0: Normal 1: Surprise remove */ - u8 IsKeyPreSet; - u8 CalOneTime; - - u8 VCO_trim; - - u32 FragCount; - u32 DMAFix; /* V1_DMA_FIX The variable can be removed if driver want to save mem space for V2. */ - - /* - * =============================================== - * Definition for MAC address - * =============================================== - */ - u8 PermanentMacAddress[ETH_ALEN + 2]; /* The Ethernet addr that are stored in EEPROM. + 2 to 8-byte alignment */ - u8 CurrentMacAddress[ETH_ALEN + 2]; /* The Enthernet addr that are in used. + 2 to 8-byte alignment */ - - /* - * ========================================= - * Definition for 802.11 - * ========================================= - */ - u8 *bssid_pointer; /* Used by hal_get_bssid for return value */ - u8 bssid[8]; /* Only 6 byte will be used. 8 byte is required for read buffer */ - u8 ssid[32]; /* maximum ssid length is 32 byte */ - - u16 AID; - u8 ssid_length; - u8 Channel; - - u16 ListenInterval; - u16 CapabilityInformation; - - u16 BeaconPeriod; - u16 ProbeDelay; - - u8 bss_type;/* 0: IBSS_NET or 1:ESS_NET */ - u8 preamble;/* 0: short preamble, 1: long preamble */ - u8 slot_time_select; /* 9 or 20 value */ - u8 phy_type; /* Phy select */ - - u32 phy_para[MAX_RF_PARAMETER]; - u32 phy_number; - - u32 CurrentRadioSw; /* 0:On 1:Off */ - u32 CurrentRadioHw; /* 0:On 1:Off */ - - u8 *power_save_point; /* Used by hal_get_power_save_mode for return value */ - u8 cwmin; - u8 desired_power_save; - u8 dtim; /* Is running dtim */ - u8 mapping_key_replace_index; /* In Key table, the next index be replaced */ - - u16 MaxReceiveLifeTime; - u16 FragmentThreshold; - u16 FragmentThreshold_tmp; - u16 cwmax; - - u8 Key_slot[MAX_KEY_TABLE][8]; /* Ownership record for key slot. For Alignment */ - u32 Key_content[MAX_KEY_TABLE][12]; /* 10DW for each entry + 2 for burst command (Off and On valid bit) */ - u8 CurrentDefaultKeyIndex; - u32 CurrentDefaultKeyLength; - - /* - * ================================================== - * Variable for each module - * ================================================== - */ - struct usb_device *udev; - struct wb35_reg reg; /* Need Wb35Reg.h */ - struct wb35_tx Wb35Tx; /* Need Wb35Tx.h */ - struct wb35_rx Wb35Rx; /* Need Wb35Rx.h */ - - struct timer_list LEDTimer; /* For LED */ - - u32 LEDpoint; /* For LED */ - - u32 dto_tx_retry_count; - u32 dto_tx_frag_count; - u32 rx_ok_count[13]; /* index=0: total rx ok */ - u32 rx_err_count[13]; /* index=0: total rx err */ - - /* for Tx debug */ - u32 tx_TBTT_start_count; - u32 tx_ETR_count; - u32 tx_WepOn_false_count; - u32 tx_Null_key_count; - u32 tx_retry_count[8]; - - u8 PowerIndexFromEEPROM; /* For 2412MHz */ - u8 power_index; - u8 IsWaitJoinComplete; /* TRUE: set join request */ - u8 band; - - u16 SoftwareSet; - u16 Reserved_s; - - u32 IsInitOK; /* 0: Driver starting 1: Driver init OK */ - - /* For Phy calibration */ - s32 iq_rsdl_gain_tx_d2; - s32 iq_rsdl_phase_tx_d2; - u32 txvga_setting_for_cal; - - u8 TxVgaSettingInEEPROM[(((MAX_TXVGA_EEPROM * 2) + 3) & ~0x03)]; /* For EEPROM value */ - u8 TxVgaFor24[16]; /* Max is 14, 2 for alignment */ - struct txvga_for_50 TxVgaFor50[36]; /* 35 channels in 5G. 35x2 = 70 byte. 2 for alignments */ - - u16 Scan_Interval; - u16 RESERVED6; - - /* LED control */ - u32 LED_control; - /* - * LED_control 4 byte: Gray_Led_1[3] Gray_Led_0[2] Led[1] Led[0] - * Gray_Led - * For Led gray setting - * Led - * 0: normal control, - * LED behavior will decide by EEPROM setting - * 1: Turn off specific LED - * 2: Always on specific LED - * 3: slow blinking specific LED - * 4: fast blinking specific LED - * 5: WPS led control is set. Led0 is Red, Led1 id Green - * - * Led[1] is parameter for WPS LED mode - * 1:InProgress - * 2: Error - * 3: Session overlap - * 4: Success control - */ - u32 LED_LinkOn; /* Turn LED on control */ - u32 LED_Scanning; /* Let LED in scan process control */ - u32 LED_Blinking; /* Temp variable for shining */ - u32 RxByteCountLast; - u32 TxByteCountLast; - - /* For global timer */ - u32 time_count; /* TICK_TIME_100ms 1 = 100ms */ -}; - -#endif diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c deleted file mode 100644 index 0d29624..0000000 --- a/drivers/staging/winbond/wbusb.c +++ /dev/null @@ -1,853 +0,0 @@ -/* - * Copyright 2008 Pavel Machek <pavel@xxxxxx> - * - * Distribute under GPLv2. - * - * The original driver was written by: - * Jeff Lee <YY_Lee@xxxxxxxxxxx> - * - * and was adapted to the 2.6 kernel by: - * Costantino Leandro (Rxart Desktop) <le_costantino@xxxxxxxxxxxxxxxxxxxxxx> - */ -#include <net/mac80211.h> -#include <linux/usb.h> -#include <linux/module.h> - -#include "core.h" -#include "mds_f.h" -#include "mto.h" -#include "wbhal.h" -#include "wb35reg_f.h" -#include "wb35tx_f.h" -#include "wb35rx_f.h" - -MODULE_DESCRIPTION("IS89C35 802.11bg WLAN USB Driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION("0.1"); - -static const struct usb_device_id wb35_table[] = { - { USB_DEVICE(0x0416, 0x0035) }, - { USB_DEVICE(0x18E8, 0x6201) }, - { USB_DEVICE(0x18E8, 0x6206) }, - { USB_DEVICE(0x18E8, 0x6217) }, - { USB_DEVICE(0x18E8, 0x6230) }, - { USB_DEVICE(0x18E8, 0x6233) }, - { USB_DEVICE(0x1131, 0x2035) }, - { 0, } -}; - -MODULE_DEVICE_TABLE(usb, wb35_table); - -static struct ieee80211_rate wbsoft_rates[] = { - { .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, -}; - -static struct ieee80211_channel wbsoft_channels[] = { - { .center_freq = 2412 }, -}; - -static struct ieee80211_supported_band wbsoft_band_2GHz = { - .channels = wbsoft_channels, - .n_channels = ARRAY_SIZE(wbsoft_channels), - .bitrates = wbsoft_rates, - .n_bitrates = ARRAY_SIZE(wbsoft_rates), -}; - -static void hal_set_beacon_period(struct hw_data *pHwData, u16 beacon_period) -{ - u32 tmp; - - if (pHwData->SurpriseRemove) - return; - - pHwData->BeaconPeriod = beacon_period; - tmp = pHwData->BeaconPeriod << 16; - tmp |= pHwData->ProbeDelay; - Wb35Reg_Write(pHwData, 0x0848, tmp); -} - -static int wbsoft_add_interface(struct ieee80211_hw *dev, - struct ieee80211_vif *vif) -{ - struct wbsoft_priv *priv = dev->priv; - - hal_set_beacon_period(&priv->sHwData, vif->bss_conf.beacon_int); - - return 0; -} - -static void wbsoft_remove_interface(struct ieee80211_hw *dev, - struct ieee80211_vif *vif) -{ -} - -static void wbsoft_stop(struct ieee80211_hw *hw) -{ -} - -static int wbsoft_get_stats(struct ieee80211_hw *hw, - struct ieee80211_low_level_stats *stats) -{ - return 0; -} - -static u64 wbsoft_prepare_multicast(struct ieee80211_hw *hw, - struct netdev_hw_addr_list *mc_list) -{ - return netdev_hw_addr_list_count(mc_list); -} - -static void wbsoft_configure_filter(struct ieee80211_hw *dev, - unsigned int changed_flags, - unsigned int *total_flags, - u64 multicast) -{ - unsigned int new_flags; - - new_flags = 0; - - if (*total_flags & FIF_PROMISC_IN_BSS) - new_flags |= FIF_PROMISC_IN_BSS; - else if ((*total_flags & FIF_ALLMULTI) || (multicast > 32)) - new_flags |= FIF_ALLMULTI; - - dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS; - - *total_flags = new_flags; -} - -static void wbsoft_tx(struct ieee80211_hw *dev, - struct ieee80211_tx_control *control, - struct sk_buff *skb) -{ - struct wbsoft_priv *priv = dev->priv; - - if (priv->sMlmeFrame.is_in_used != PACKET_FREE_TO_USE) { - priv->sMlmeFrame.wNumTxMMPDUDiscarded++; - kfree_skb(skb); - return; - } - - priv->sMlmeFrame.is_in_used = PACKET_COME_FROM_MLME; - - priv->sMlmeFrame.pMMPDU = skb->data; - priv->sMlmeFrame.data_type = FRAME_TYPE_802_11_MANAGEMENT; - priv->sMlmeFrame.len = skb->len; - priv->sMlmeFrame.wNumTxMMPDU++; - - /* - * H/W will enter power save by set the register. S/W don't send null - * frame with PWRMgt bit enbled to enter power save now. - */ - - Mds_Tx(priv); -} - -static int wbsoft_start(struct ieee80211_hw *dev) -{ - struct wbsoft_priv *priv = dev->priv; - - priv->enabled = true; - - return 0; -} - -static void hal_set_radio_mode(struct hw_data *pHwData, unsigned char radio_off) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (pHwData->SurpriseRemove) - return; - - if (radio_off) { /* disable Baseband receive off */ - pHwData->CurrentRadioSw = 1; /* off */ - reg->M24_MacControl &= 0xffffffbf; - } else { - pHwData->CurrentRadioSw = 0; /* on */ - reg->M24_MacControl |= 0x00000040; - } - Wb35Reg_Write(pHwData, 0x0824, reg->M24_MacControl); -} - -static void hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info channel) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (pHwData->SurpriseRemove) - return; - - RFSynthesizer_SwitchingChannel(pHwData, channel); /* Switch channel */ - pHwData->Channel = channel.ChanNo; - pHwData->band = channel.band; - reg->M28_MacControl &= ~0xff; /* Clean channel information field */ - reg->M28_MacControl |= channel.ChanNo; - Wb35Reg_WriteWithCallbackValue(pHwData, 0x0828, reg->M28_MacControl, - (s8 *) &channel, - sizeof(struct chan_info)); -} - -static void hal_set_current_channel(struct hw_data *pHwData, struct chan_info channel) -{ - hal_set_current_channel_ex(pHwData, channel); -} - -static void hal_set_accept_broadcast(struct hw_data *pHwData, u8 enable) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (pHwData->SurpriseRemove) - return; - - reg->M00_MacControl &= ~0x02000000; /* The HW value */ - - if (enable) - reg->M00_MacControl |= 0x02000000; /* The HW value */ - - Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl); -} - -/* For wep key error detection, we need to accept broadcast packets to be received temporary. */ -static void hal_set_accept_promiscuous(struct hw_data *pHwData, u8 enable) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (pHwData->SurpriseRemove) - return; - - if (enable) { - reg->M00_MacControl |= 0x00400000; - Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl); - } else { - reg->M00_MacControl &= ~0x00400000; - Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl); - } -} - -static void hal_set_accept_multicast(struct hw_data *pHwData, u8 enable) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (pHwData->SurpriseRemove) - return; - - reg->M00_MacControl &= ~0x01000000; /* The HW value */ - if (enable) - reg->M00_MacControl |= 0x01000000; /* The HW value */ - Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl); -} - -static void hal_set_accept_beacon(struct hw_data *pHwData, u8 enable) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (pHwData->SurpriseRemove) - return; - - if (!enable) /* Due to SME and MLME are not suitable for 35 */ - return; - - reg->M00_MacControl &= ~0x04000000; /* The HW value */ - if (enable) - reg->M00_MacControl |= 0x04000000; /* The HW value */ - - Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl); -} - -static int wbsoft_config(struct ieee80211_hw *dev, u32 changed) -{ - struct wbsoft_priv *priv = dev->priv; - struct chan_info ch; - - /* Should use channel_num, or something, as that is already pre-translated */ - ch.band = 1; - ch.ChanNo = 1; - - hal_set_current_channel(&priv->sHwData, ch); - hal_set_accept_broadcast(&priv->sHwData, 1); - hal_set_accept_promiscuous(&priv->sHwData, 1); - hal_set_accept_multicast(&priv->sHwData, 1); - hal_set_accept_beacon(&priv->sHwData, 1); - hal_set_radio_mode(&priv->sHwData, 0); - - return 0; -} - -static u64 wbsoft_get_tsf(struct ieee80211_hw *dev, struct ieee80211_vif *vif) -{ - return 0; -} - -static const struct ieee80211_ops wbsoft_ops = { - .tx = wbsoft_tx, - .start = wbsoft_start, - .stop = wbsoft_stop, - .add_interface = wbsoft_add_interface, - .remove_interface = wbsoft_remove_interface, - .config = wbsoft_config, - .prepare_multicast = wbsoft_prepare_multicast, - .configure_filter = wbsoft_configure_filter, - .get_stats = wbsoft_get_stats, - .get_tsf = wbsoft_get_tsf, -}; - -static void hal_set_ethernet_address(struct hw_data *pHwData, u8 *current_address) -{ - u32 ltmp[2]; - - if (pHwData->SurpriseRemove) - return; - - memcpy(pHwData->CurrentMacAddress, current_address, ETH_ALEN); - - ltmp[0] = cpu_to_le32(*(u32 *) pHwData->CurrentMacAddress); - ltmp[1] = cpu_to_le32(*(u32 *) (pHwData->CurrentMacAddress + 4)) & 0xffff; - - Wb35Reg_BurstWrite(pHwData, 0x03e8, ltmp, 2, AUTO_INCREMENT); -} - -static void hal_get_permanent_address(struct hw_data *pHwData, u8 *pethernet_address) -{ - if (pHwData->SurpriseRemove) - return; - - memcpy(pethernet_address, pHwData->PermanentMacAddress, 6); -} - -static void hal_stop(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - - pHwData->Wb35Rx.rx_halt = 1; - Wb35Rx_stop(pHwData); - - pHwData->Wb35Tx.tx_halt = 1; - Wb35Tx_stop(pHwData); - - reg->D00_DmaControl &= ~0xc0000000; /* Tx Off, Rx Off */ - Wb35Reg_Write(pHwData, 0x0400, reg->D00_DmaControl); -} - -static unsigned char hal_idle(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (!pHwData->SurpriseRemove && reg->EP0vm_state != VM_STOP) - return false; - - return true; -} - -u8 hal_get_antenna_number(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - - if ((reg->BB2C & BIT(11)) == 0) - return 0; - else - return 1; -} - -/* 0 : radio on; 1: radio off */ -static u8 hal_get_hw_radio_off(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (pHwData->SurpriseRemove) - return 1; - - /* read the bit16 of register U1B0 */ - Wb35Reg_Read(pHwData, 0x3b0, ®->U1B0); - if ((reg->U1B0 & 0x00010000)) { - pHwData->CurrentRadioHw = 1; - return 1; - } else { - pHwData->CurrentRadioHw = 0; - return 0; - } -} - -static u8 LED_GRAY[20] = { - 0, 3, 4, 6, 8, 10, 11, 12, 13, 14, 15, 14, 13, 12, 11, 10, 8, 6, 4, 2 -}; - -static u8 LED_GRAY2[30] = { - 7, 8, 9, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 15, 14, 13, 12, 11, 10, 9, 8 -}; - -static void hal_led_control(unsigned long data) -{ - struct wbsoft_priv *adapter = (struct wbsoft_priv *)data; - struct hw_data *pHwData = &adapter->sHwData; - struct wb35_reg *reg = &pHwData->reg; - u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT; - u32 TimeInterval = 500, ltmp, ltmp2; - ltmp = 0; - - if (pHwData->SurpriseRemove) - return; - - if (pHwData->LED_control) { - ltmp2 = pHwData->LED_control & 0xff; - if (ltmp2 == 5) { /* 5 is WPS mode */ - TimeInterval = 100; - ltmp2 = (pHwData->LED_control >> 8) & 0xff; - switch (ltmp2) { - case 1: /* [0.2 On][0.1 Off]... */ - pHwData->LED_Blinking %= 3; - ltmp = 0x1010; /* Led 1 & 0 Green and Red */ - if (pHwData->LED_Blinking == 2) /* Turn off */ - ltmp = 0; - break; - case 2: /* [0.1 On][0.1 Off]... */ - pHwData->LED_Blinking %= 2; - ltmp = 0x0010; /* Led 0 red color */ - if (pHwData->LED_Blinking) /* Turn off */ - ltmp = 0; - break; - case 3: /* [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]... */ - pHwData->LED_Blinking %= 15; - ltmp = 0x0010; /* Led 0 red color */ - if ((pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking % 2)) /* Turn off 0.6 sec */ - ltmp = 0; - break; - case 4: /* [300 On][ off ] */ - ltmp = 0x1000; /* Led 1 Green color */ - if (pHwData->LED_Blinking >= 3000) - ltmp = 0; /* led maybe on after 300sec * 32bit counter overlap. */ - break; - } - pHwData->LED_Blinking++; - - reg->U1BC_LEDConfigure = ltmp; - if (LEDSet != 7) { /* Only 111 mode has 2 LEDs on PCB. */ - reg->U1BC_LEDConfigure |= (ltmp & 0xff) << 8; /* Copy LED result to each LED control register */ - reg->U1BC_LEDConfigure |= (ltmp & 0xff00) >> 8; - } - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); - } - } else if (pHwData->CurrentRadioSw || pHwData->CurrentRadioHw) { /* If radio off */ - if (reg->U1BC_LEDConfigure & 0x1010) { - reg->U1BC_LEDConfigure &= ~0x1010; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); - } - } else { - switch (LEDSet) { - case 4: /* [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing */ - if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */ - /* Blinking if scanning is on progress */ - if (pHwData->LED_Scanning) { - if (pHwData->LED_Blinking == 0) { - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 On */ - pHwData->LED_Blinking = 1; - TimeInterval = 300; - } else { - reg->U1BC_LEDConfigure &= ~0x10; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */ - pHwData->LED_Blinking = 0; - TimeInterval = 300; - } - } else { - /* Turn Off LED_0 */ - if (reg->U1BC_LEDConfigure & 0x10) { - reg->U1BC_LEDConfigure &= ~0x10; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */ - } - } - } else { - /* Turn On LED_0 */ - if ((reg->U1BC_LEDConfigure & 0x10) == 0) { - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */ - } - } - break; - case 6: /* [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing */ - if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */ - /* Blinking if scanning is on progress */ - if (pHwData->LED_Scanning) { - if (pHwData->LED_Blinking == 0) { - reg->U1BC_LEDConfigure &= ~0xf; - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 On */ - pHwData->LED_Blinking = 1; - TimeInterval = 300; - } else { - reg->U1BC_LEDConfigure &= ~0x1f; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */ - pHwData->LED_Blinking = 0; - TimeInterval = 300; - } - } else { - /* Gray blinking if in disconnect state and not scanning */ - ltmp = reg->U1BC_LEDConfigure; - reg->U1BC_LEDConfigure &= ~0x1f; - if (LED_GRAY2[(pHwData->LED_Blinking % 30)]) { - reg->U1BC_LEDConfigure |= 0x10; - reg->U1BC_LEDConfigure |= - LED_GRAY2[(pHwData->LED_Blinking % 30)]; - } - pHwData->LED_Blinking++; - if (reg->U1BC_LEDConfigure != ltmp) - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */ - TimeInterval = 100; - } - } else { - /* Turn On LED_0 */ - if ((reg->U1BC_LEDConfigure & 0x10) == 0) { - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */ - } - } - break; - case 5: /* [101] Only 1 Led be placed on PCB and use LED_1 for showing */ - if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */ - /* Blinking if scanning is on progress */ - if (pHwData->LED_Scanning) { - if (pHwData->LED_Blinking == 0) { - reg->U1BC_LEDConfigure |= 0x1000; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 On */ - pHwData->LED_Blinking = 1; - TimeInterval = 300; - } else { - reg->U1BC_LEDConfigure &= ~0x1000; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 Off */ - pHwData->LED_Blinking = 0; - TimeInterval = 300; - } - } else { - /* Turn Off LED_1 */ - if (reg->U1BC_LEDConfigure & 0x1000) { - reg->U1BC_LEDConfigure &= ~0x1000; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 Off */ - } - } - } else { - /* Is transmitting/receiving ?? */ - if ((adapter->RxByteCount != - pHwData->RxByteCountLast) - || (adapter->TxByteCount != - pHwData->TxByteCountLast)) { - if ((reg->U1BC_LEDConfigure & 0x3000) != - 0x3000) { - reg->U1BC_LEDConfigure |= 0x3000; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 On */ - } - /* Update variable */ - pHwData->RxByteCountLast = - adapter->RxByteCount; - pHwData->TxByteCountLast = - adapter->TxByteCount; - TimeInterval = 200; - } else { - /* Turn On LED_1 and blinking if transmitting/receiving */ - if ((reg->U1BC_LEDConfigure & 0x3000) != - 0x1000) { - reg->U1BC_LEDConfigure &= - ~0x3000; - reg->U1BC_LEDConfigure |= - 0x1000; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 On */ - } - } - } - break; - default: /* Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active */ - if ((reg->U1BC_LEDConfigure & 0x3000) != 0x3000) { - reg->U1BC_LEDConfigure |= 0x3000; /* LED_1 is always on and event enable */ - Wb35Reg_Write(pHwData, 0x03bc, - reg->U1BC_LEDConfigure); - } - - if (pHwData->LED_Blinking) { - /* Gray blinking */ - reg->U1BC_LEDConfigure &= ~0x0f; - reg->U1BC_LEDConfigure |= 0x10; - reg->U1BC_LEDConfigure |= - LED_GRAY[(pHwData->LED_Blinking - 1) % 20]; - Wb35Reg_Write(pHwData, 0x03bc, - reg->U1BC_LEDConfigure); - - pHwData->LED_Blinking += 2; - if (pHwData->LED_Blinking < 40) - TimeInterval = 100; - else { - pHwData->LED_Blinking = 0; /* Stop blinking */ - reg->U1BC_LEDConfigure &= ~0x0f; - Wb35Reg_Write(pHwData, 0x03bc, - reg->U1BC_LEDConfigure); - } - break; - } - - if (pHwData->LED_LinkOn) { - if (!(reg->U1BC_LEDConfigure & 0x10)) { /* Check the LED_0 */ - /* Try to turn ON LED_0 after gray blinking */ - reg->U1BC_LEDConfigure |= 0x10; - pHwData->LED_Blinking = 1; /* Start blinking */ - TimeInterval = 50; - } - } else { - if (reg->U1BC_LEDConfigure & 0x10) { /* Check the LED_0 */ - reg->U1BC_LEDConfigure &= ~0x10; - Wb35Reg_Write(pHwData, 0x03bc, - reg->U1BC_LEDConfigure); - } - } - break; - } - } - - pHwData->time_count += TimeInterval; - Wb35Tx_CurrentTime(adapter, pHwData->time_count); - pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval); - add_timer(&pHwData->LEDTimer); -} - -static int hal_init_hardware(struct ieee80211_hw *hw) -{ - struct wbsoft_priv *priv = hw->priv; - struct hw_data *pHwData = &priv->sHwData; - u16 SoftwareSet; - - pHwData->MaxReceiveLifeTime = DEFAULT_MSDU_LIFE_TIME; - pHwData->FragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; - - if (!Wb35Reg_initial(pHwData)) - goto error_reg_destroy; - - if (!Wb35Tx_initial(pHwData)) - goto error_tx_destroy; - - if (!Wb35Rx_initial(pHwData)) - goto error_rx_destroy; - - init_timer(&pHwData->LEDTimer); - pHwData->LEDTimer.function = hal_led_control; - pHwData->LEDTimer.data = (unsigned long)priv; - pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000); - add_timer(&pHwData->LEDTimer); - - SoftwareSet = hal_software_set(pHwData); - - Wb35Rx_start(hw); - Wb35Tx_EP2VM_start(priv); - - return 0; - -error_rx_destroy: - Wb35Rx_destroy(pHwData); -error_tx_destroy: - Wb35Tx_destroy(pHwData); -error_reg_destroy: - Wb35Reg_destroy(pHwData); - - pHwData->SurpriseRemove = 1; - return -EINVAL; -} - -static int wb35_hw_init(struct ieee80211_hw *hw) -{ - struct wbsoft_priv *priv = hw->priv; - struct hw_data *pHwData = &priv->sHwData; - u8 EEPROM_region; - u8 HwRadioOff; - u8 *pMacAddr2; - u8 *pMacAddr; - int err; - - pHwData->phy_type = RF_DECIDE_BY_INF; - - priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold; - priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; - - priv->sLocalPara.region_INF = REGION_AUTO; - priv->sLocalPara.TxRateMode = RATE_AUTO; - priv->sLocalPara.bMacOperationMode = MODE_802_11_BG; - priv->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE; - priv->sLocalPara.bPreambleMode = AUTO_MODE; - priv->sLocalPara.bWepKeyError = false; - priv->sLocalPara.bToSelfPacketReceived = false; - priv->sLocalPara.WepKeyDetectTimerCount = 2 * 100; /* 2 seconds */ - - priv->sLocalPara.RadioOffStatus.boSwRadioOff = false; - - err = hal_init_hardware(hw); - if (err) - goto error; - - EEPROM_region = hal_get_region_from_EEPROM(pHwData); - if (EEPROM_region != REGION_AUTO) - priv->sLocalPara.region = EEPROM_region; - else { - if (priv->sLocalPara.region_INF != REGION_AUTO) - priv->sLocalPara.region = priv->sLocalPara.region_INF; - else - priv->sLocalPara.region = REGION_USA; /* default setting */ - } - - Mds_initial(priv); - - /* - * If no user-defined address in the registry, use the address - * "burned" on the NIC instead. - */ - pMacAddr = priv->sLocalPara.ThisMacAddress; - pMacAddr2 = priv->sLocalPara.PermanentAddress; - - /* Reading ethernet address from EEPROM */ - hal_get_permanent_address(pHwData, priv->sLocalPara.PermanentAddress); - if (memcmp(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH) == 0) - memcpy(pMacAddr, pMacAddr2, MAC_ADDR_LENGTH); - else { - /* Set the user define MAC address */ - hal_set_ethernet_address(pHwData, - priv->sLocalPara.ThisMacAddress); - } - - priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData); - hal_get_hw_radio_off(pHwData); - - /* Waiting for HAL setting OK */ - while (!hal_idle(pHwData)) - msleep(10); - - MTO_Init(priv); - - HwRadioOff = hal_get_hw_radio_off(pHwData); - priv->sLocalPara.RadioOffStatus.boHwRadioOff = !!HwRadioOff; - - hal_set_radio_mode(pHwData, - (unsigned char)(priv->sLocalPara.RadioOffStatus. - boSwRadioOff - || priv->sLocalPara.RadioOffStatus. - boHwRadioOff)); - - /* Notify hal that the driver is ready now. */ - hal_driver_init_OK(pHwData) = 1; - -error: - return err; -} - -static int wb35_probe(struct usb_interface *intf, - const struct usb_device_id *id_table) -{ - struct usb_device *udev = interface_to_usbdev(intf); - struct usb_endpoint_descriptor *endpoint; - struct usb_host_interface *interface; - struct ieee80211_hw *dev; - struct wbsoft_priv *priv; - int err; - u32 ltmp; - - usb_get_dev(udev); - - /* Check the device if it already be opened */ - err = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - 0x01, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x0, 0x400, <mp, 4, HZ * 100); - if (err < 0) - goto error; - - /* Is already initialized? */ - ltmp = cpu_to_le32(ltmp); - if (ltmp) { - err = -EBUSY; - goto error; - } - - dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops); - if (!dev) { - err = -ENOMEM; - goto error; - } - - priv = dev->priv; - - priv->sHwData.udev = udev; - - interface = intf->cur_altsetting; - endpoint = &interface->endpoint[0].desc; - - err = wb35_hw_init(dev); - if (err) - goto error_free_hw; - - SET_IEEE80211_DEV(dev, &udev->dev); - { - struct hw_data *pHwData = &priv->sHwData; - unsigned char dev_addr[MAX_ADDR_LEN]; - hal_get_permanent_address(pHwData, dev_addr); - SET_IEEE80211_PERM_ADDR(dev, dev_addr); - } - - dev->extra_tx_headroom = 12; /* FIXME */ - dev->flags = IEEE80211_HW_SIGNAL_UNSPEC; - dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); - - dev->max_signal = 100; - dev->queues = 1; - - dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &wbsoft_band_2GHz; - - err = ieee80211_register_hw(dev); - if (err) - goto error_free_hw; - - usb_set_intfdata(intf, dev); - - return 0; - -error_free_hw: - ieee80211_free_hw(dev); -error: - usb_put_dev(udev); - return err; -} - -static void hal_halt(struct hw_data *pHwData) -{ - del_timer_sync(&pHwData->LEDTimer); - /* XXX: Wait for Timer DPC exit. */ - msleep(100); - Wb35Rx_destroy(pHwData); - Wb35Tx_destroy(pHwData); - Wb35Reg_destroy(pHwData); -} - -static void wb35_hw_halt(struct wbsoft_priv *adapter) -{ - /* Turn off Rx and Tx hardware ability */ - hal_stop(&adapter->sHwData); - /* Waiting Irp completed */ - msleep(100); - - hal_halt(&adapter->sHwData); -} - -static void wb35_disconnect(struct usb_interface *intf) -{ - struct ieee80211_hw *hw = usb_get_intfdata(intf); - struct wbsoft_priv *priv = hw->priv; - - wb35_hw_halt(priv); - - ieee80211_stop_queues(hw); - ieee80211_unregister_hw(hw); - ieee80211_free_hw(hw); - - usb_set_intfdata(intf, NULL); - usb_put_dev(interface_to_usbdev(intf)); -} - -static struct usb_driver wb35_driver = { - .name = "w35und", - .id_table = wb35_table, - .probe = wb35_probe, - .disconnect = wb35_disconnect, -}; - -module_usb_driver(wb35_driver); -- 1.8.5.5 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
