These members of the encoder private data can be calculated based on
the comedi channel stored in the 'chan' member of the private data.
Do that instead and remove the unnecessary members.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregk@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/s626.c | 95 +++++++++++++++++------------------
1 file changed, 46 insertions(+), 49 deletions(-)
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 1785aae..68f677a 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -139,8 +139,6 @@ struct s626_enc_info {
void (*reset_cap_flags)(struct comedi_device *dev,
const struct s626_enc_info *k);
- uint16_t my_cra; /* address of CRA register */
- uint16_t my_crb; /* address of CRB register */
uint16_t my_latch_lsw; /* address of Latch least-significant-word
* register */
uint16_t my_event_bits[4]; /* bit translations for IntSrc -->RDMISC2 */
@@ -750,7 +748,7 @@ static uint32_t s626_read_latch(struct comedi_device *dev,
static void s626_set_latch_source(struct comedi_device *dev,
const struct s626_enc_info *k, uint16_t value)
{
- s626_debi_replace(dev, k->my_crb,
+ s626_debi_replace(dev, S626_LP_CRB(k->chan),
~(S626_CRBMSK_INTCTRL | S626_CRBMSK_LATCHSRC),
S626_SET_CRB_LATCHSRC(value));
}
@@ -773,7 +771,7 @@ static void s626_preload(struct comedi_device *dev,
static void s626_reset_cap_flags_a(struct comedi_device *dev,
const struct s626_enc_info *k)
{
- s626_debi_replace(dev, k->my_crb, ~S626_CRBMSK_INTCTRL,
+ s626_debi_replace(dev, S626_LP_CRB(k->chan), ~S626_CRBMSK_INTCTRL,
(S626_SET_CRB_INTRESETCMD(1) |
S626_SET_CRB_INTRESET_A(1)));
}
@@ -781,7 +779,7 @@ static void s626_reset_cap_flags_a(struct comedi_device *dev,
static void s626_reset_cap_flags_b(struct comedi_device *dev,
const struct s626_enc_info *k)
{
- s626_debi_replace(dev, k->my_crb, ~S626_CRBMSK_INTCTRL,
+ s626_debi_replace(dev, S626_LP_CRB(k->chan), ~S626_CRBMSK_INTCTRL,
(S626_SET_CRB_INTRESETCMD(1) |
S626_SET_CRB_INTRESET_B(1)));
}
@@ -799,8 +797,8 @@ static uint16_t s626_get_mode_a(struct comedi_device *dev,
unsigned cntsrc, clkmult, clkpol, encmode;
/* Fetch CRA and CRB register images. */
- cra = s626_debi_read(dev, k->my_cra);
- crb = s626_debi_read(dev, k->my_crb);
+ cra = s626_debi_read(dev, S626_LP_CRA(k->chan));
+ crb = s626_debi_read(dev, S626_LP_CRB(k->chan));
/*
* Populate the standardized counter setup bit fields.
@@ -854,8 +852,8 @@ static uint16_t s626_get_mode_b(struct comedi_device *dev,
unsigned cntsrc, clkmult, clkpol, encmode;
/* Fetch CRA and CRB register images. */
- cra = s626_debi_read(dev, k->my_cra);
- crb = s626_debi_read(dev, k->my_crb);
+ cra = s626_debi_read(dev, S626_LP_CRA(k->chan));
+ crb = s626_debi_read(dev, S626_LP_CRB(k->chan));
/*
* Populate the standardized counter setup bit fields.
@@ -982,9 +980,9 @@ static void s626_set_mode_a(struct comedi_device *dev,
* While retaining CounterB and LatchSrc configurations, program the
* new counter operating mode.
*/
- s626_debi_replace(dev, k->my_cra,
+ s626_debi_replace(dev, S626_LP_CRA(k->chan),
S626_CRAMSK_INDXSRC_B | S626_CRAMSK_CNTSRC_B, cra);
- s626_debi_replace(dev, k->my_crb,
+ s626_debi_replace(dev, S626_LP_CRB(k->chan),
~(S626_CRBMSK_INTCTRL | S626_CRBMSK_CLKENAB_A), crb);
}
@@ -1066,9 +1064,9 @@ static void s626_set_mode_b(struct comedi_device *dev,
* While retaining CounterA and LatchSrc configurations, program the
* new counter operating mode.
*/
- s626_debi_replace(dev, k->my_cra,
+ s626_debi_replace(dev, S626_LP_CRA(k->chan),
~(S626_CRAMSK_INDXSRC_B | S626_CRAMSK_CNTSRC_B), cra);
- s626_debi_replace(dev, k->my_crb,
+ s626_debi_replace(dev, S626_LP_CRB(k->chan),
S626_CRBMSK_CLKENAB_A | S626_CRBMSK_LATCHSRC, crb);
}
@@ -1078,7 +1076,7 @@ static void s626_set_mode_b(struct comedi_device *dev,
static void s626_set_enable_a(struct comedi_device *dev,
const struct s626_enc_info *k, uint16_t enab)
{
- s626_debi_replace(dev, k->my_crb,
+ s626_debi_replace(dev, S626_LP_CRB(k->chan),
~(S626_CRBMSK_INTCTRL | S626_CRBMSK_CLKENAB_A),
S626_SET_CRB_CLKENAB_A(enab));
}
@@ -1086,7 +1084,7 @@ static void s626_set_enable_a(struct comedi_device *dev,
static void s626_set_enable_b(struct comedi_device *dev,
const struct s626_enc_info *k, uint16_t enab)
{
- s626_debi_replace(dev, k->my_crb,
+ s626_debi_replace(dev, S626_LP_CRB(k->chan),
~(S626_CRBMSK_INTCTRL | S626_CRBMSK_CLKENAB_B),
S626_SET_CRB_CLKENAB_B(enab));
}
@@ -1094,20 +1092,23 @@ static void s626_set_enable_b(struct comedi_device *dev,
static uint16_t s626_get_enable_a(struct comedi_device *dev,
const struct s626_enc_info *k)
{
- return S626_GET_CRB_CLKENAB_A(s626_debi_read(dev, k->my_crb));
+ return S626_GET_CRB_CLKENAB_A(s626_debi_read(dev,
+ S626_LP_CRB(k->chan)));
}
static uint16_t s626_get_enable_b(struct comedi_device *dev,
const struct s626_enc_info *k)
{
- return S626_GET_CRB_CLKENAB_B(s626_debi_read(dev, k->my_crb));
+ return S626_GET_CRB_CLKENAB_B(s626_debi_read(dev,
+ S626_LP_CRB(k->chan)));
}
#ifdef unused
static uint16_t s626_get_latch_source(struct comedi_device *dev,
const struct s626_enc_info *k)
{
- return S626_GET_CRB_LATCHSRC(s626_debi_read(dev, k->my_crb));
+ return S626_GET_CRB_LATCHSRC(s626_debi_read(dev,
+ S626_LP_CRB(k->chan)));
}
#endif
@@ -1119,14 +1120,14 @@ static uint16_t s626_get_latch_source(struct comedi_device *dev,
static void s626_set_load_trig_a(struct comedi_device *dev,
const struct s626_enc_info *k, uint16_t trig)
{
- s626_debi_replace(dev, k->my_cra, ~S626_CRAMSK_LOADSRC_A,
+ s626_debi_replace(dev, S626_LP_CRA(k->chan), ~S626_CRAMSK_LOADSRC_A,
S626_SET_CRA_LOADSRC_A(trig));
}
static void s626_set_load_trig_b(struct comedi_device *dev,
const struct s626_enc_info *k, uint16_t trig)
{
- s626_debi_replace(dev, k->my_crb,
+ s626_debi_replace(dev, S626_LP_CRB(k->chan),
~(S626_CRBMSK_LOADSRC_B | S626_CRBMSK_INTCTRL),
S626_SET_CRB_LOADSRC_B(trig));
}
@@ -1134,13 +1135,15 @@ static void s626_set_load_trig_b(struct comedi_device *dev,
static uint16_t s626_get_load_trig_a(struct comedi_device *dev,
const struct s626_enc_info *k)
{
- return S626_GET_CRA_LOADSRC_A(s626_debi_read(dev, k->my_cra));
+ return S626_GET_CRA_LOADSRC_A(s626_debi_read(dev,
+ S626_LP_CRA(k->chan)));
}
static uint16_t s626_get_load_trig_b(struct comedi_device *dev,
const struct s626_enc_info *k)
{
- return S626_GET_CRB_LOADSRC_B(s626_debi_read(dev, k->my_crb));
+ return S626_GET_CRB_LOADSRC_B(s626_debi_read(dev,
+ S626_LP_CRB(k->chan)));
}
/*
@@ -1155,12 +1158,12 @@ static void s626_set_int_src_a(struct comedi_device *dev,
struct s626_private *devpriv = dev->private;
/* Reset any pending counter overflow or index captures. */
- s626_debi_replace(dev, k->my_crb, ~S626_CRBMSK_INTCTRL,
+ s626_debi_replace(dev, S626_LP_CRB(k->chan), ~S626_CRBMSK_INTCTRL,
(S626_SET_CRB_INTRESETCMD(1) |
S626_SET_CRB_INTRESET_A(1)));
/* Program counter interrupt source. */
- s626_debi_replace(dev, k->my_cra, ~S626_CRAMSK_INTSRC_A,
+ s626_debi_replace(dev, S626_LP_CRA(k->chan), ~S626_CRAMSK_INTSRC_A,
S626_SET_CRA_INTSRC_A(int_source));
/* Update MISC2 interrupt enable mask. */
@@ -1177,15 +1180,17 @@ static void s626_set_int_src_b(struct comedi_device *dev,
uint16_t crb;
/* Cache writeable CRB register image. */
- crb = s626_debi_read(dev, k->my_crb) & ~S626_CRBMSK_INTCTRL;
+ crb = s626_debi_read(dev, S626_LP_CRB(k->chan)) & ~S626_CRBMSK_INTCTRL;
/* Reset any pending counter overflow or index captures. */
- s626_debi_write(dev, k->my_crb, (crb | S626_SET_CRB_INTRESETCMD(1) |
- S626_SET_CRB_INTRESET_B(1)));
+ s626_debi_write(dev, S626_LP_CRB(k->chan),
+ (crb | S626_SET_CRB_INTRESETCMD(1) |
+ S626_SET_CRB_INTRESET_B(1)));
/* Program counter interrupt source. */
- s626_debi_write(dev, k->my_crb, ((crb & ~S626_CRBMSK_INTSRC_B) |
- S626_SET_CRB_INTSRC_B(int_source)));
+ s626_debi_write(dev, S626_LP_CRB(k->chan),
+ ((crb & ~S626_CRBMSK_INTSRC_B) |
+ S626_SET_CRB_INTSRC_B(int_source)));
/* Update MISC2 interrupt enable mask. */
devpriv->counter_int_enabs =
@@ -1196,13 +1201,15 @@ static void s626_set_int_src_b(struct comedi_device *dev,
static uint16_t s626_get_int_src_a(struct comedi_device *dev,
const struct s626_enc_info *k)
{
- return S626_GET_CRA_INTSRC_A(s626_debi_read(dev, k->my_cra));
+ return S626_GET_CRA_INTSRC_A(s626_debi_read(dev,
+ S626_LP_CRA(k->chan)));
}
static uint16_t s626_get_int_src_b(struct comedi_device *dev,
const struct s626_enc_info *k)
{
- return S626_GET_CRB_INTSRC_B(s626_debi_read(dev, k->my_crb));
+ return S626_GET_CRB_INTSRC_B(s626_debi_read(dev,
+ S626_LP_CRB(k->chan)));
}
#ifdef unused
@@ -1295,10 +1302,11 @@ static void s626_pulse_index_a(struct comedi_device *dev,
{
uint16_t cra;
- cra = s626_debi_read(dev, k->my_cra);
+ cra = s626_debi_read(dev, S626_LP_CRA(k->chan));
/* Pulse index. */
- s626_debi_write(dev, k->my_cra, (cra ^ S626_CRAMSK_INDXPOL_A));
- s626_debi_write(dev, k->my_cra, cra);
+ s626_debi_write(dev, S626_LP_CRA(k->chan),
+ (cra ^ S626_CRAMSK_INDXPOL_A));
+ s626_debi_write(dev, S626_LP_CRA(k->chan), cra);
}
static void s626_pulse_index_b(struct comedi_device *dev,
@@ -1306,10 +1314,11 @@ static void s626_pulse_index_b(struct comedi_device *dev,
{
uint16_t crb;
- crb = s626_debi_read(dev, k->my_crb) & ~S626_CRBMSK_INTCTRL;
+ crb = s626_debi_read(dev, S626_LP_CRB(k->chan)) & ~S626_CRBMSK_INTCTRL;
/* Pulse index. */
- s626_debi_write(dev, k->my_crb, (crb ^ S626_CRBMSK_INDXPOL_B));
- s626_debi_write(dev, k->my_crb, crb);
+ s626_debi_write(dev, S626_LP_CRB(k->chan),
+ (crb ^ S626_CRBMSK_INDXPOL_B));
+ s626_debi_write(dev, S626_LP_CRB(k->chan), crb);
}
static const struct s626_enc_info s626_enc_chan_info[] = {
@@ -1325,8 +1334,6 @@ static const struct s626_enc_info s626_enc_chan_info[] = {
.set_load_trig = s626_set_load_trig_a,
.set_mode = s626_set_mode_a,
.reset_cap_flags = s626_reset_cap_flags_a,
- .my_cra = S626_LP_CRA(0),
- .my_crb = S626_LP_CRB(0),
.my_latch_lsw = S626_LP_CNTR0ALSW,
.my_event_bits = S626_EVBITS(0),
}, {
@@ -1341,8 +1348,6 @@ static const struct s626_enc_info s626_enc_chan_info[] = {
.set_load_trig = s626_set_load_trig_a,
.set_mode = s626_set_mode_a,
.reset_cap_flags = s626_reset_cap_flags_a,
- .my_cra = S626_LP_CRA(1),
- .my_crb = S626_LP_CRB(1),
.my_latch_lsw = S626_LP_CNTR1ALSW,
.my_event_bits = S626_EVBITS(1),
}, {
@@ -1357,8 +1362,6 @@ static const struct s626_enc_info s626_enc_chan_info[] = {
.set_load_trig = s626_set_load_trig_a,
.set_mode = s626_set_mode_a,
.reset_cap_flags = s626_reset_cap_flags_a,
- .my_cra = S626_LP_CRA(2),
- .my_crb = S626_LP_CRB(2),
.my_latch_lsw = S626_LP_CNTR2ALSW,
.my_event_bits = S626_EVBITS(2),
}, {
@@ -1373,8 +1376,6 @@ static const struct s626_enc_info s626_enc_chan_info[] = {
.set_load_trig = s626_set_load_trig_b,
.set_mode = s626_set_mode_b,
.reset_cap_flags = s626_reset_cap_flags_b,
- .my_cra = S626_LP_CRA(3),
- .my_crb = S626_LP_CRB(3),
.my_latch_lsw = S626_LP_CNTR0BLSW,
.my_event_bits = S626_EVBITS(3),
}, {
@@ -1389,8 +1390,6 @@ static const struct s626_enc_info s626_enc_chan_info[] = {
.set_load_trig = s626_set_load_trig_b,
.set_mode = s626_set_mode_b,
.reset_cap_flags = s626_reset_cap_flags_b,
- .my_cra = S626_LP_CRA(4),
- .my_crb = S626_LP_CRB(4),
.my_latch_lsw = S626_LP_CNTR1BLSW,
.my_event_bits = S626_EVBITS(4),
}, {
@@ -1405,8 +1404,6 @@ static const struct s626_enc_info s626_enc_chan_info[] = {
.set_load_trig = s626_set_load_trig_b,
.set_mode = s626_set_mode_b,
.reset_cap_flags = s626_reset_cap_flags_b,
- .my_cra = S626_LP_CRA(5),
- .my_crb = S626_LP_CRB(5),
.my_latch_lsw = S626_LP_CNTR2BLSW,
.my_event_bits = S626_EVBITS(5),
},
--
1.9.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
