[PATCH 12/17] staging: comedi: ni_65xx: tidy up the subdevice initialization

[H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>]

For aesthetics, add some whitespace to the subdevice init.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregk@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/ni_65xx.c | 42 ++++++++++++++++----------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c
index 746a91c..f64e2bb 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -597,28 +597,28 @@ static int ni_65xx_auto_attach(struct comedi_device *dev,
 
 	s = &dev->subdevices[0];
 	if (board->num_di_ports) {
-		s->type = COMEDI_SUBD_DI;
-		s->subdev_flags = SDF_READABLE;
-		s->n_chan = NI_65XX_PORT_TO_CHAN(board->num_di_ports);
-		s->range_table = &range_digital;
-		s->maxdata = 1;
-		s->insn_config = ni_65xx_dio_insn_config;
-		s->insn_bits = ni_65xx_dio_insn_bits;
+		s->type		= COMEDI_SUBD_DI;
+		s->subdev_flags	= SDF_READABLE;
+		s->n_chan	= NI_65XX_PORT_TO_CHAN(board->num_di_ports);
+		s->maxdata	= 1;
+		s->range_table	= &range_digital;
+		s->insn_bits	= ni_65xx_dio_insn_bits;
+		s->insn_config	= ni_65xx_dio_insn_config;
 
 		/* the input ports always start at port 0 */
 		s->private = (void *)0;
 	} else {
-		s->type = COMEDI_SUBD_UNUSED;
+		s->type		= COMEDI_SUBD_UNUSED;
 	}
 
 	s = &dev->subdevices[1];
 	if (board->num_do_ports) {
-		s->type = COMEDI_SUBD_DO;
-		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-		s->n_chan = NI_65XX_PORT_TO_CHAN(board->num_do_ports);
-		s->range_table = &range_digital;
-		s->maxdata = 1;
-		s->insn_bits = ni_65xx_dio_insn_bits;
+		s->type		= COMEDI_SUBD_DO;
+		s->subdev_flags	= SDF_WRITABLE;
+		s->n_chan	= NI_65XX_PORT_TO_CHAN(board->num_do_ports);
+		s->maxdata	= 1;
+		s->range_table	= &range_digital;
+		s->insn_bits	= ni_65xx_dio_insn_bits;
 
 		/* the output ports always start after the input ports */
 		s->private = (void *)(unsigned long)board->num_di_ports;
@@ -628,13 +628,13 @@ static int ni_65xx_auto_attach(struct comedi_device *dev,
 
 	s = &dev->subdevices[2];
 	if (board->num_dio_ports) {
-		s->type = COMEDI_SUBD_DIO;
-		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-		s->n_chan = NI_65XX_PORT_TO_CHAN(board->num_dio_ports);
-		s->range_table = &range_digital;
-		s->maxdata = 1;
-		s->insn_config = ni_65xx_dio_insn_config;
-		s->insn_bits = ni_65xx_dio_insn_bits;
+		s->type		= COMEDI_SUBD_DIO;
+		s->subdev_flags	= SDF_READABLE | SDF_WRITABLE;
+		s->n_chan	= NI_65XX_PORT_TO_CHAN(board->num_dio_ports);
+		s->maxdata	= 1;
+		s->range_table	= &range_digital;
+		s->insn_bits	= ni_65xx_dio_insn_bits;
+		s->insn_config	= ni_65xx_dio_insn_config;
 
 		/* the input/output ports always start at port 0 */
 		s->private = (void *)0;
-- 
1.9.3

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel