This patch simply fixes the style errors in panel.c
that scripts/checkpatch.pl reported
Signed-off-by: Vincent Heuken <me@xxxxxxxxxxxxxxxxx>
---
drivers/staging/panel/panel.c | 244 +++++++++++++++++++++---------------------
1 file changed, 121 insertions(+), 123 deletions(-)
diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c
index 08f9a48..04f0157 100644
--- a/drivers/staging/panel/panel.c
+++ b/drivers/staging/panel/panel.c
@@ -462,7 +462,7 @@ MODULE_PARM_DESC(lcd_type,
static int lcd_proto = -1;
module_param(lcd_proto, int, 0000);
MODULE_PARM_DESC(lcd_proto,
- "LCD communication: 0=parallel (//), 1=serial, 2=TI LCD Interface");
+ "LCD communication: 0=parallel (//), 1=serial, 2=TI LCD Interface");
static int lcd_charset = -1;
module_param(lcd_charset, int, 0000);
@@ -488,7 +488,7 @@ MODULE_PARM_DESC(profile,
* WARNING! no check will be performed about collisions with keypad !
*/
-static int lcd_e_pin = PIN_NOT_SET;
+static int lcd_e_pin = PIN_NOT_SET;
module_param(lcd_e_pin, int, 0000);
MODULE_PARM_DESC(lcd_e_pin,
"# of the // port pin connected to LCD 'E' signal, with polarity (-17..17)");
@@ -594,12 +594,12 @@ static const char (*keypad_profile)[4][9] = old_keypad_profile;
/* FIXME: this should be converted to a bit array containing signals states */
static struct {
- unsigned char e; /* parallel LCD E (data latch on falling edge) */
- unsigned char rs; /* parallel LCD RS (0 = cmd, 1 = data) */
- unsigned char rw; /* parallel LCD R/W (0 = W, 1 = R) */
- unsigned char bl; /* parallel LCD backlight (0 = off, 1 = on) */
- unsigned char cl; /* serial LCD clock (latch on rising edge) */
- unsigned char da; /* serial LCD data */
+ unsigned char e; /* parallel LCD E (data latch on falling edge) */
+ unsigned char rs; /* parallel LCD RS (0 = cmd, 1 = data) */
+ unsigned char rw; /* parallel LCD R/W (0 = W, 1 = R) */
+ unsigned char bl; /* parallel LCD backlight (0 = off, 1 = on) */
+ unsigned char cl; /* serial LCD clock (latch on rising edge) */
+ unsigned char da; /* serial LCD data */
} bits;
static void init_scan_timer(void);
@@ -681,14 +681,14 @@ static void pin_to_bits(int pin, unsigned char *d_val, unsigned char *c_val)
c_bit = PNL_PSTROBE;
inv = !inv;
break;
- case PIN_D0...PIN_D7: /* D0 - D7 = 2 - 9 */
+ case PIN_D0 ... PIN_D7: /* D0 - D7 = 2 - 9 */
d_bit = 1 << (pin - 2);
break;
case PIN_AUTOLF: /* autofeed, inverted */
c_bit = PNL_PAUTOLF;
inv = !inv;
break;
- case PIN_INITP: /* init, direct */
+ case PIN_INITP: /* init, direct */
c_bit = PNL_PINITP;
break;
case PIN_SELECP: /* select_in, inverted */
@@ -733,10 +733,10 @@ static void lcd_send_serial(int byte)
panel_set_bits();
bits.da = byte & 1;
panel_set_bits();
- udelay(2); /* maintain the data during 2 us before CLK up */
+ udelay(2); /* maintain the data during 2 us before CLK up */
bits.cl = BIT_SET; /* CLK high */
panel_set_bits();
- udelay(1); /* maintain the strobe during 1 us */
+ udelay(1); /* maintain the strobe during 1 us */
byte >>= 1;
}
}
@@ -782,19 +782,19 @@ static void lcd_write_cmd_p8(int cmd)
spin_lock_irq(&pprt_lock);
/* present the data to the data port */
w_dtr(pprt, cmd);
- udelay(20); /* maintain the data during 20 us before the strobe */
+ udelay(20); /* maintain the data during 20 us before the strobe */
bits.e = BIT_SET;
bits.rs = BIT_CLR;
bits.rw = BIT_CLR;
set_ctrl_bits();
- udelay(40); /* maintain the strobe during 40 us */
+ udelay(40); /* maintain the strobe during 40 us */
bits.e = BIT_CLR;
set_ctrl_bits();
- udelay(120); /* the shortest command takes at least 120 us */
+ udelay(120); /* the shortest command takes at least 120 us */
spin_unlock_irq(&pprt_lock);
}
@@ -804,19 +804,19 @@ static void lcd_write_data_p8(int data)
spin_lock_irq(&pprt_lock);
/* present the data to the data port */
w_dtr(pprt, data);
- udelay(20); /* maintain the data during 20 us before the strobe */
+ udelay(20); /* maintain the data during 20 us before the strobe */
bits.e = BIT_SET;
bits.rs = BIT_SET;
bits.rw = BIT_CLR;
set_ctrl_bits();
- udelay(40); /* maintain the strobe during 40 us */
+ udelay(40); /* maintain the strobe during 40 us */
bits.e = BIT_CLR;
set_ctrl_bits();
- udelay(45); /* the shortest data takes at least 45 us */
+ udelay(45); /* the shortest data takes at least 45 us */
spin_unlock_irq(&pprt_lock);
}
@@ -1005,35 +1005,35 @@ static inline int handle_lcd_special_code(void)
/* check for display mode flags */
switch (*esc) {
- case 'D': /* Display ON */
+ case 'D': /* Display ON */
lcd_flags |= LCD_FLAG_D;
processed = 1;
break;
- case 'd': /* Display OFF */
+ case 'd': /* Display OFF */
lcd_flags &= ~LCD_FLAG_D;
processed = 1;
break;
- case 'C': /* Cursor ON */
+ case 'C': /* Cursor ON */
lcd_flags |= LCD_FLAG_C;
processed = 1;
break;
- case 'c': /* Cursor OFF */
+ case 'c': /* Cursor OFF */
lcd_flags &= ~LCD_FLAG_C;
processed = 1;
break;
- case 'B': /* Blink ON */
+ case 'B': /* Blink ON */
lcd_flags |= LCD_FLAG_B;
processed = 1;
break;
- case 'b': /* Blink OFF */
+ case 'b': /* Blink OFF */
lcd_flags &= ~LCD_FLAG_B;
processed = 1;
break;
- case '+': /* Back light ON */
+ case '+': /* Back light ON */
lcd_flags |= LCD_FLAG_L;
processed = 1;
break;
- case '-': /* Back light OFF */
+ case '-': /* Back light OFF */
lcd_flags &= ~LCD_FLAG_L;
processed = 1;
break;
@@ -1046,22 +1046,22 @@ static inline int handle_lcd_special_code(void)
}
processed = 1;
break;
- case 'f': /* Small Font */
+ case 'f': /* Small Font */
lcd_flags &= ~LCD_FLAG_F;
processed = 1;
break;
- case 'F': /* Large Font */
+ case 'F': /* Large Font */
lcd_flags |= LCD_FLAG_F;
processed = 1;
break;
- case 'n': /* One Line */
+ case 'n': /* One Line */
lcd_flags &= ~LCD_FLAG_N;
processed = 1;
break;
- case 'N': /* Two Lines */
+ case 'N': /* Two Lines */
lcd_flags |= LCD_FLAG_N;
break;
- case 'l': /* Shift Cursor Left */
+ case 'l': /* Shift Cursor Left */
if (lcd_addr_x > 0) {
/* back one char if not at end of line */
if (lcd_addr_x < lcd_bwidth)
@@ -1070,103 +1070,102 @@ static inline int handle_lcd_special_code(void)
}
processed = 1;
break;
- case 'r': /* shift cursor right */
+ case 'r': /* shift cursor right */
if (lcd_addr_x < lcd_width) {
/* allow the cursor to pass the end of the line */
- if (lcd_addr_x <
- (lcd_bwidth - 1))
+ if (lcd_addr_x < (lcd_bwidth - 1))
lcd_write_cmd(0x14);
lcd_addr_x++;
}
processed = 1;
break;
- case 'L': /* shift display left */
+ case 'L': /* shift display left */
lcd_left_shift++;
lcd_write_cmd(0x18);
processed = 1;
break;
- case 'R': /* shift display right */
+ case 'R': /* shift display right */
lcd_left_shift--;
lcd_write_cmd(0x1C);
processed = 1;
break;
- case 'k': { /* kill end of line */
- int x;
- for (x = lcd_addr_x; x < lcd_bwidth; x++)
- lcd_write_data(' ');
+ case 'k':{ /* kill end of line */
+ int x;
+ for (x = lcd_addr_x; x < lcd_bwidth; x++)
+ lcd_write_data(' ');
- /* restore cursor position */
- lcd_gotoxy();
- processed = 1;
- break;
- }
- case 'I': /* reinitialize display */
+ /* restore cursor position */
+ lcd_gotoxy();
+ processed = 1;
+ break;
+ }
+ case 'I': /* reinitialize display */
lcd_init_display();
lcd_left_shift = 0;
processed = 1;
break;
- case 'G': {
- /* Generator : LGcxxxxx...xx; must have <c> between '0'
- * and '7', representing the numerical ASCII code of the
- * redefined character, and <xx...xx> a sequence of 16
- * hex digits representing 8 bytes for each character.
- * Most LCDs will only use 5 lower bits of the 7 first
- * bytes.
- */
+ case 'G':{
+ /* Generator : LGcxxxxx...xx; must have <c> between '0'
+ * and '7', representing the numerical ASCII code of the
+ * redefined character, and <xx...xx> a sequence of 16
+ * hex digits representing 8 bytes for each character.
+ * Most LCDs will only use 5 lower bits of the 7 first
+ * bytes.
+ */
- unsigned char cgbytes[8];
- unsigned char cgaddr;
- int cgoffset;
- int shift;
- char value;
- int addr;
+ unsigned char cgbytes[8];
+ unsigned char cgaddr;
+ int cgoffset;
+ int shift;
+ char value;
+ int addr;
- if (strchr(esc, ';') == NULL)
- break;
+ if (strchr(esc, ';') == NULL)
+ break;
- esc++;
+ esc++;
- cgaddr = *(esc++) - '0';
- if (cgaddr > 7) {
- processed = 1;
- break;
- }
+ cgaddr = *(esc++) - '0';
+ if (cgaddr > 7) {
+ processed = 1;
+ break;
+ }
+
+ cgoffset = 0;
+ shift = 0;
+ value = 0;
+ while (*esc && cgoffset < 8) {
+ shift ^= 4;
+ if (*esc >= '0' && *esc <= '9')
+ value |= (*esc - '0') << shift;
+ else if (*esc >= 'A' && *esc <= 'Z')
+ value |= (*esc - 'A' + 10) << shift;
+ else if (*esc >= 'a' && *esc <= 'z')
+ value |= (*esc - 'a' + 10) << shift;
+ else {
+ esc++;
+ continue;
+ }
+
+ if (shift == 0) {
+ cgbytes[cgoffset++] = value;
+ value = 0;
+ }
- cgoffset = 0;
- shift = 0;
- value = 0;
- while (*esc && cgoffset < 8) {
- shift ^= 4;
- if (*esc >= '0' && *esc <= '9')
- value |= (*esc - '0') << shift;
- else if (*esc >= 'A' && *esc <= 'Z')
- value |= (*esc - 'A' + 10) << shift;
- else if (*esc >= 'a' && *esc <= 'z')
- value |= (*esc - 'a' + 10) << shift;
- else {
esc++;
- continue;
}
- if (shift == 0) {
- cgbytes[cgoffset++] = value;
- value = 0;
- }
+ lcd_write_cmd(0x40 | (cgaddr * 8));
+ for (addr = 0; addr < cgoffset; addr++)
+ lcd_write_data(cgbytes[addr]);
- esc++;
+ /* ensures that we stop writing to CGRAM */
+ lcd_gotoxy();
+ processed = 1;
+ break;
}
-
- lcd_write_cmd(0x40 | (cgaddr * 8));
- for (addr = 0; addr < cgoffset; addr++)
- lcd_write_data(cgbytes[addr]);
-
- /* ensures that we stop writing to CGRAM */
- lcd_gotoxy();
- processed = 1;
- break;
- }
- case 'x': /* gotoxy : LxXXX[yYYY]; */
- case 'y': /* gotoxy : LyYYY[xXXX]; */
+ case 'x': /* gotoxy : LxXXX[yYYY]; */
+ case 'y': /* gotoxy : LyYYY[xXXX]; */
if (strchr(esc, ';') == NULL)
break;
@@ -1194,14 +1193,12 @@ static inline int handle_lcd_special_code(void)
if ((oldflags ^ lcd_flags) &
(LCD_FLAG_B | LCD_FLAG_C | LCD_FLAG_D))
/* set display mode */
- lcd_write_cmd(0x08
- | ((lcd_flags & LCD_FLAG_D) ? 4 : 0)
+ lcd_write_cmd(0x08 | ((lcd_flags & LCD_FLAG_D) ? 4 : 0)
| ((lcd_flags & LCD_FLAG_C) ? 2 : 0)
| ((lcd_flags & LCD_FLAG_B) ? 1 : 0));
/* check whether one of F,N flags was changed */
else if ((oldflags ^ lcd_flags) & (LCD_FLAG_F | LCD_FLAG_N))
- lcd_write_cmd(0x30
- | ((lcd_flags & LCD_FLAG_F) ? 4 : 0)
+ lcd_write_cmd(0x30 | ((lcd_flags & LCD_FLAG_F) ? 4 : 0)
| ((lcd_flags & LCD_FLAG_N) ? 8 : 0));
/* check whether L flag was changed */
else if ((oldflags ^ lcd_flags) & (LCD_FLAG_L)) {
@@ -1321,7 +1318,7 @@ static ssize_t lcd_write(struct file *file,
or if it is getting too long. */
if (processed || (lcd_escape_len >= LCD_ESCAPE_LEN))
lcd_escape_len = -1;
- } /* escape codes */
+ } /* escape codes */
}
return tmp - buf;
@@ -1350,10 +1347,10 @@ static int lcd_release(struct inode *inode, struct file *file)
}
static const struct file_operations lcd_fops = {
- .write = lcd_write,
- .open = lcd_open,
+ .write = lcd_write,
+ .open = lcd_open,
.release = lcd_release,
- .llseek = no_llseek,
+ .llseek = no_llseek,
};
static struct miscdevice lcd_dev = {
@@ -1586,8 +1583,7 @@ static ssize_t keypad_read(struct file *file,
return -EINTR;
}
- for (; count-- > 0 && (keypad_buflen > 0);
- ++i, ++tmp, --keypad_buflen) {
+ for (; count-- > 0 && (keypad_buflen > 0); ++i, ++tmp, --keypad_buflen) {
put_user(keypad_buffer[keypad_start], tmp);
keypad_start = (keypad_start + 1) % KEYPAD_BUFFER;
}
@@ -1617,10 +1613,10 @@ static int keypad_release(struct inode *inode, struct file *file)
}
static const struct file_operations keypad_fops = {
- .read = keypad_read, /* read */
- .open = keypad_open, /* open */
+ .read = keypad_read, /* read */
+ .open = keypad_open, /* open */
.release = keypad_release, /* close */
- .llseek = default_llseek,
+ .llseek = default_llseek,
};
static struct miscdevice keypad_dev = {
@@ -1705,7 +1701,7 @@ static void phys_scan_contacts(void)
/* this is easy: use old bits when they are flapping,
* use new ones when stable */
phys_curr = (phys_prev & (phys_read ^ phys_read_prev)) |
- (phys_read & ~(phys_read ^ phys_read_prev));
+ (phys_read & ~(phys_read ^ phys_read_prev));
}
static inline int input_state_high(struct logical_input *input)
@@ -1730,14 +1726,13 @@ static inline int input_state_high(struct logical_input *input)
*/
if (((phys_prev & input->mask) == input->value)
&& ((phys_curr & input->mask) > input->value)) {
- input->state = INPUT_ST_LOW; /* invalidate */
+ input->state = INPUT_ST_LOW; /* invalidate */
return 1;
}
#endif
if ((phys_curr & input->mask) == input->value) {
- if ((input->type == INPUT_TYPE_STD) &&
- (input->high_timer == 0)) {
+ if ((input->type == INPUT_TYPE_STD) && (input->high_timer == 0)) {
input->high_timer++;
if (input->u.std.press_fct != NULL)
input->u.std.press_fct(input->u.std.press_data);
@@ -1933,9 +1928,10 @@ static int input_name2mask(const char *name, pmask_t *mask, pmask_t *value,
om = im = m = v = 0ULL;
while (*name) {
int in, out, bit, neg;
- for (in = 0; (in < sizeof(sigtab)) &&
- (sigtab[in] != *name); in++)
- ;
+ for
+ (in = 0;
+ (in < sizeof(sigtab)) &&
+ (sigtab[in] != *name); in++);
if (in >= sizeof(sigtab))
return 0; /* input name not found */
neg = (in & 1); /* odd (lower) names are negated */
@@ -2100,13 +2096,14 @@ static void panel_attach(struct parport *port)
return;
}
- pprt = parport_register_device(port, "panel", NULL, NULL, /* pf, kf */
+ pprt = parport_register_device(port, "panel", NULL, NULL, /* pf, kf */
NULL,
/*PARPORT_DEV_EXCL */
0, (void *)&pprt);
if (pprt == NULL) {
- pr_err("%s: port->number=%d parport=%d, parport_register_device() failed\n",
- __func__, port->number, parport);
+ pr_err
+ ("%s: port->number=%d parport=%d, parport_register_device() failed\n",
+ __func__, port->number, parport);
return;
}
@@ -2146,8 +2143,9 @@ static void panel_detach(struct parport *port)
return;
if (!pprt) {
- pr_err("%s: port->number=%d parport=%d, nothing to unregister.\n",
- __func__, port->number, parport);
+ pr_err
+ ("%s: port->number=%d parport=%d, nothing to unregister.\n",
+ __func__, port->number, parport);
return;
}
--
1.9.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
