Reformat the comment describing this comedi driver to use the usual block comment format. Also remove reference to digital I/O emulating an 8255, because it doesn't, and remove "DIO only" from the "Description:" line as it also supports analog inputs. Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx> --- drivers/staging/comedi/drivers/ni_daq_700.c | 51 ++++++++++++++--------------- 1 file changed, 25 insertions(+), 26 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index 171a71d..55d80ef 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -18,32 +18,31 @@ */ /* -Driver: ni_daq_700 -Description: National Instruments PCMCIA DAQCard-700 DIO only -Author: Fred Brooks <nsaspook@xxxxxxxxxxxx>, - based on ni_daq_dio24 by Daniel Vecino Castel <dvecino@xxxxxxx> -Devices: [National Instruments] PCMCIA DAQ-Card-700 (ni_daq_700) -Status: works -Updated: Wed, 19 Sep 2012 12:07:20 +0000 - -The daqcard-700 appears in Comedi as a digital I/O subdevice (0) with -16 channels and a analog input subdevice (1) with 16 single-ended channels. - -Digital: The channel 0 corresponds to the daqcard-700's output -port, bit 0; channel 8 corresponds to the input port, bit 0. - -Digital direction configuration: channels 0-7 output, 8-15 input (8225 device -emu as port A output, port B input, port C N/A). - -Analog: The input range is 0 to 4095 for -10 to +10 volts -IRQ is assigned but not used. - -Version 0.1 Original DIO only driver -Version 0.2 DIO and basic AI analog input support on 16 se channels - -Manuals: Register level: http://www.ni.com/pdf/manuals/340698.pdf - User Manual: http://www.ni.com/pdf/manuals/320676d.pdf -*/ + * Driver: ni_daq_700 + * Description: National Instruments PCMCIA DAQCard-700 + * Author: Fred Brooks <nsaspook@xxxxxxxxxxxx>, + * based on ni_daq_dio24 by Daniel Vecino Castel <dvecino@xxxxxxx> + * Devices: [National Instruments] PCMCIA DAQ-Card-700 (ni_daq_700) + * Status: works + * Updated: Wed, 19 Sep 2012 12:07:20 +0000 + * + * The daqcard-700 appears in Comedi as a digital I/O subdevice (0) with + * 16 channels and a analog input subdevice (1) with 16 single-ended channels. + * + * Digital: The channel 0 corresponds to the daqcard-700's output + * port, bit 0; channel 8 corresponds to the input port, bit 0. + * + * Digital direction configuration: channels 0-7 output, 8-15 input. + * + * Analog: The input range is 0 to 4095 for -10 to +10 volts + * IRQ is assigned but not used. + * + * Version 0.1 Original DIO only driver + * Version 0.2 DIO and basic AI analog input support on 16 se channels + * + * Manuals: Register level: http://www.ni.com/pdf/manuals/340698.pdf + * User Manual: http://www.ni.com/pdf/manuals/320676d.pdf + */ #include <linux/module.h> #include <linux/delay.h> -- 1.9.2 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
