Cleaned up dead code, added curly {} braces where needed
and fixed the following:
ERROR: do not use C99 // comments
ERROR: else should follow close brace '}'
ERROR: space required after that ',' (ctx:VxV)
ERROR: space required before the open brace '{'
ERROR: spaces required around that '=' (ctx:WxV)
ERROR: space required after that close brace '}'
ERROR: spaces required around that '=' (ctx:VxW)
ERROR: spaces required around that '=' (ctx:VxV)
ERROR: spaces required around that '<' (ctx:VxV)
ERROR: spaces required around that '!=' (ctx:WxV)
ERROR: spaces required around that '==' (ctx:VxV)
ERROR: spaces required around that '!=' (ctx:VxV)
ERROR: spaces required around that '&&' (ctx:VxV)
ERROR: trailing statements should be on next line
ERROR: space prohibited before that '--' (ctx:WxO)
ERROR: need consistent spacing around '|' (ctx:VxW)
ERROR: need consistent spacing around '*' (ctx:WxV)
ERROR: space required before the open parenthesis '('
ERROR: that open brace { should be on the previous line
ERROR: space prohibited after that open parenthesis '('
ERROR: space prohibited before that close parenthesis ')'
WARNING: missing space after struct definition
WARNING: Missing a blank line after declarations
WARNING: please, no spaces at the start of a line
WARNING: suspect code indent for conditional statements (16, 16)
WARNING: __func__ should be used instead of gcc specific __FUNCTION__
Signed-off-by: Chaitanya Hazarey <c@xxxxx>
---
drivers/staging/rtl8192u/r8192U_wx.c | 63 +++++++++++++++++-----------------
1 file changed, 31 insertions(+), 32 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c
index 7f8a3e0..6b48c08 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.c
+++ b/drivers/staging/rtl8192u/r8192U_wx.c
@@ -252,16 +252,16 @@ static int rtl8180_wx_get_range(struct net_device *dev,
/* ~5 Mb/s real (802.11b) */
range->throughput = 5 * 1000 * 1000;
- // TODO: Not used in 802.11b?
-// range->min_nwid; /* Minimal NWID we are able to set */
- // TODO: Not used in 802.11b?
-// range->max_nwid; /* Maximal NWID we are able to set */
+ /* TODO: Not used in 802.11b? */
+/* range->min_nwid; */ /* Minimal NWID we are able to set */
+ /* TODO: Not used in 802.11b? */
+/* range->max_nwid; */ /* Maximal NWID we are able to set */
/* Old Frequency (backward compat - moved lower ) */
-// range->old_num_channels;
-// range->old_num_frequency;
-// range->old_freq[6]; /* Filler to keep "version" at the same offset */
- if(priv->rf_set_sens != NULL)
+/* range->old_num_channels; */
+/* range->old_num_frequency; */
+/* range->old_freq[6]; */ /* Filler to keep "version" at the same offset */
+ if (priv->rf_set_sens != NULL)
range->sensitivity = priv->max_sens; /* signal level threshold range */
range->max_qual.qual = 100;
@@ -284,7 +284,7 @@ static int rtl8180_wx_get_range(struct net_device *dev,
range->min_frag = MIN_FRAG_THRESHOLD;
range->max_frag = MAX_FRAG_THRESHOLD;
- range->min_pmp=0;
+ range->min_pmp = 0;
range->max_pmp = 5000000;
range->min_pmt = 0;
range->max_pmt = 65535*1000;
@@ -295,30 +295,30 @@ static int rtl8180_wx_get_range(struct net_device *dev,
range->we_version_compiled = WIRELESS_EXT;
range->we_version_source = 16;
-// range->retry_capa; /* What retry options are supported */
-// range->retry_flags; /* How to decode max/min retry limit */
-// range->r_time_flags; /* How to decode max/min retry life */
-// range->min_retry; /* Minimal number of retries */
-// range->max_retry; /* Maximal number of retries */
-// range->min_r_time; /* Minimal retry lifetime */
-// range->max_r_time; /* Maximal retry lifetime */
+/* range->retry_capa; */ /* What retry options are supported */
+/* range->retry_flags; */ /* How to decode max/min retry limit */
+/* range->r_time_flags; */ /* How to decode max/min retry life */
+/* range->min_retry; */ /* Minimal number of retries */
+/* range->max_retry; */ /* Maximal number of retries */
+/* range->min_r_time; */ /* Minimal retry lifetime */
+/* range->max_r_time; */ /* Maximal retry lifetime */
for (i = 0, val = 0; i < 14; i++) {
- // Include only legal frequencies for some countries
+ /* Include only legal frequencies for some countries */
if ((GET_DOT11D_INFO(priv->ieee80211)->channel_map)[i+1]) {
range->freq[val].i = i + 1;
range->freq[val].m = ieee80211_wlan_frequencies[i] * 100000;
range->freq[val].e = 1;
val++;
} else {
- // FIXME: do we need to set anything for channels
- // we don't use ?
+ /* FIXME: do we need to set anything for channels */
+ /* we don't use ? */
}
if (val == IW_MAX_FREQUENCIES)
- break;
+ break;
}
range->num_frequency = val;
range->num_channels = val;
@@ -336,30 +336,28 @@ static int r8192_wx_set_scan(struct net_device *dev, struct iw_request_info *a,
struct ieee80211_device *ieee = priv->ieee80211;
int ret = 0;
- if(!priv->up) return -ENETDOWN;
+ if (!priv->up)
+ return -ENETDOWN;
if (priv->ieee80211->LinkDetectInfo.bBusyTraffic == true)
return -EAGAIN;
- if (wrqu->data.flags & IW_SCAN_THIS_ESSID)
- {
+ if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
struct iw_scan_req *req = (struct iw_scan_req *)b;
- if (req->essid_len)
- {
- //printk("==**&*&*&**===>scan set ssid:%s\n", req->essid);
+ if (req->essid_len) {
ieee->current_network.ssid_len = req->essid_len;
memcpy(ieee->current_network.ssid, req->essid, req->essid_len);
- //printk("=====>network ssid:%s\n", ieee->current_network.ssid);
}
}
down(&priv->wx_sem);
- if(priv->ieee80211->state != IEEE80211_LINKED){
+ if (priv->ieee80211->state != IEEE80211_LINKED) {
priv->ieee80211->scanning = 0;
ieee80211_softmac_scan_syncro(priv->ieee80211);
ret = 0;
+ } else {
+ ret = ieee80211_wx_set_scan(priv->ieee80211, a, wrqu, b);
}
- else
- ret = ieee80211_wx_set_scan(priv->ieee80211,a,wrqu,b);
+
up(&priv->wx_sem);
return ret;
}
@@ -372,11 +370,12 @@ static int r8192_wx_get_scan(struct net_device *dev, struct iw_request_info *a,
int ret;
struct r8192_priv *priv = ieee80211_priv(dev);
- if(!priv->up) return -ENETDOWN;
+ if (!priv->up)
+ return -ENETDOWN;
down(&priv->wx_sem);
- ret = ieee80211_wx_get_scan(priv->ieee80211,a,wrqu,b);
+ ret = ieee80211_wx_get_scan(priv->ieee80211, a, wrqu, b);
up(&priv->wx_sem);
--
1.7.9.5
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
