On 2014-05-24 23:24, Chase Southwood wrote:
This board supports an interrupt that can be generated by an AND/OR
combination of 16 of the input channels.
Create a separate subdevice to handle this interrupt.
In doing this, this patch moves the apci1564_di_config() operation from
the digital input subdevice to this new subdevice, and also renames it to
make it more apparent that it is the config operation for the COS interrupt.
Signed-off-by: Chase Southwood <chase.southwood@xxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
---
.../staging/comedi/drivers/addi-data/hwdrv_apci1564.c | 8 ++++----
drivers/staging/comedi/drivers/addi_apci_1564.c | 18 ++++++++++++++++--
2 files changed, 20 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
index 0ba5385..a38ccf9 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
@@ -101,10 +101,10 @@ static unsigned int ui_InterruptData, ui_Type;
* data[2] Interrupt mask for the mode 1
* data[3] Interrupt mask for the mode 2
*/
-static int apci1564_di_config(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
+static int apci1564_cos_insn_config(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
Since the original insn_config routine for the "DI" subdevice was quite
"bespoke" shall we say, I don't think it's worth adopting it "as is" for
the "COS" subdevice. Better just to remove it until it can be
implemented properly.
{
struct addi_private *devpriv = dev->private;
diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c
index 13d9962..6af1e4c 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -105,7 +105,7 @@ static int apci1564_auto_attach(struct comedi_device *dev,
dev->irq = pcidev->irq;
}
- ret = comedi_alloc_subdevices(dev, 3);
+ ret = comedi_alloc_subdevices(dev, 4);
if (ret)
return ret;
@@ -117,7 +117,6 @@ static int apci1564_auto_attach(struct comedi_device *dev,
s->maxdata = 1;
s->len_chanlist = 32;
s->range_table = &range_digital;
- s->insn_config = apci1564_di_config;
s->insn_bits = apci1564_di_insn_bits;
/* Allocate and Initialise DO Subdevice Structures */
@@ -144,6 +143,21 @@ static int apci1564_auto_attach(struct comedi_device *dev,
s->insn_read = apci1564_timer_read;
s->insn_config = apci1564_timer_config;
+ /* Change-Of-State (COS) interrupt subdevice */
+ s = &dev->subdevices[3];
+ if (dev->irq) {
+ dev->read_subdev = s;
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE | SDF_CMD_READ;
+ s->n_chan = 1;
+ s->maxdata = 1;
+ s->len_chanlist = 1;
+ s->range_table = &range_digital;
+ s->insn_config = apci1564_cos_insn_config;
It would be nice to have an 'insn_bits' routine, even if the routine
just gives back a dummy data value for now.
+ } else {
+ s->type = COMEDI_SUBD_UNUSED;
+ }
+
return 0;
}
--
-=( Ian Abbott @ MEV Ltd. E-mail: <abbotti@xxxxxxxxx> )=-
-=( Tel: +44 (0)161 477 1898 FAX: +44 (0)161 718 3587 )=-
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
