This is a patch to remove warnings reported by checkpatch tool on cb_pcimdas.c file Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@xxxxxxxxx> --- drivers/staging/comedi/drivers/cb_pcimdas.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c index d3141c8..50e522e 100644 --- a/drivers/staging/comedi/drivers/cb_pcimdas.c +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c @@ -31,7 +31,8 @@ Configuration Options: Developed from cb_pcidas and skel by Richard Bytheway (mocelet@xxxxxxxx). Only supports DIO, AO and simple AI in it's present form. -No interrupts, multi channel or FIFO AI, although the card looks like it could support this. +No interrupts, multi channel or FIFO AI, +although the card looks like it could support this. See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details. */ @@ -128,8 +129,12 @@ static int cb_pcimdas_ai_rinsn(struct comedi_device *dev, d = d & 0xfd; outb(d, devpriv->BADR3 + 5); } - outb(0x01, devpriv->BADR3 + 6); /* set bursting off, conversions on */ - outb(0x00, devpriv->BADR3 + 7); /* set range to 10V. UP/BP is controlled by a switch on the board */ + + /* set bursting off, conversions on */ + outb(0x01, devpriv->BADR3 + 6); + + /* set range to 10V. UP/BP is controlled by a switch on the board */ + outb(0x00, devpriv->BADR3 + 7); /* * write channel limits to multiplexer, set Low (bits 0-3) and -- 1.7.10.4 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
